► Precision Specialty Tools | Boring Bars

Machine Internal Diameters with Better Control & Access The outside of a component may be easy to machine, but the real challenge often lies inside the bore. Limited clearance, tool deflection & restricted visibility make internal turning a demanding operation. Precision Specialty Tools Boring Bars give Australian machinists & engineering...

Machine Internal Diameters with Better Control & Access

The outside of a component may be easy to machine, but the real challenge often lies inside the bore. Limited clearance, tool deflection & restricted visibility make internal turning a demanding operation. Precision Specialty Tools Boring Bars give Australian machinists & engineering workshops a choice of carbide-tipped HEX bars & double-ended toolholder configurations for suitable lathe work.

A boring bar reaches into an existing opening to machine an internal surface or enlarge a bore. Unlike an ordinary external turning tool, it must operate within the available diameter while maintaining sufficient rigidity to produce the required finish.

Industrial Shed's range includes carbide-tipped HEX models in several sizes, plus double-ended bars designed for compatible square HSS cutting bits. Selecting the correct format begins with the actual hole, the internal feature being produced & the machine's toolholding arrangement.

For related machining equipment, browse Workshop & Engineering.

Carbide-Tipped HEX Boring Bars & Double-Ended Toolholders

The collection contains two main product families.

Carbide-tipped HEX lathe boring bars are listed in sizes including:

  • 24mm | LBBT24M

  • 19mm | LBBT19M

  • 17mm | LBBT17M

  • 13mm | LBBT13M

  • 10mm | LBBT10M

  • 8mm | LBBT08M

  • 6mm | LBBT06M

  • 5mm | LBBT05M

  • 4mm | LBBT04M

Double-ended boring bars include configurations described as 45° & 90°, with square-bit sizes from 1/8 inch to 1/2 inch across the listed models.

Examples include LBB1/8HSS, LBB3/16HSS, LBB1/4HSS, LBB5/16HSS, LBB3/8HSS & LBB1/2HSS.

These product groups should not be treated as interchangeable. Their cutting arrangements, holder dimensions & setup requirements differ.

Why Boring Bars Need Careful Sizing?

An oversized bar may not enter the existing hole. An unnecessarily slender bar can be more susceptible to deflection, especially when extended far beyond its support.

The ideal choice balances clearance against rigidity. The tool must reach the required depth without contacting surrounding surfaces, while remaining sufficiently supported for the cutting conditions.

A useful rule is to minimise unnecessary overhang within the manufacturer's permitted setup. Actual allowable reach depends on the bar, material, machine & operation.

For dimensional checks before selecting tooling, explore Precision Specialty Tools | Calipers.

Boring Bars Versus Drills – Different Jobs Inside a Hole

A drill commonly creates an initial opening in solid material. A boring bar is generally used to machine an existing opening, often to establish a required internal diameter or surface.

The operations may be performed in sequence, but they are not substitutes for one another. A boring tool requires enough initial access for its body & cutting geometry.

For compatible holemaking equipment, browse Air Drills. Machine-tool selection must still suit the required operation.

What Should You Look for in a Lathe Boring Bar?

The most useful boring bar is the one that reaches the internal feature without compromising the machining setup.

  • Existing bore: Confirm the starting diameter & available clearance.

  • Machining depth: Establish the required reach.

  • Bar size: Balance access against stiffness.

  • Cutting format: Compare carbide-tipped & square HSS-bit arrangements.

  • Toolholding: Verify shank geometry & compatible mounting.

  • Working orientation: Check the required cutting position.

  • Workpiece material: Match tooling & cutting conditions to the material.

  • Inspection: Plan how the finished bore will be measured.

For wider dimensional equipment, Testing & Measurement Tools supports the inspection stage.

Carbide-Tipped Boring Bars – Understanding the Application

Carbide-tipped bars provide a cutting arrangement intended for compatible internal-machining tasks.

Their suitability depends on the material, cutting geometry, tool size & operating conditions. The presence of a carbide tip does not automatically establish the correct speed, feed or maximum depth of cut.

Compare the selected model's specifications with the intended lathe operation before machining.

Double-Ended Boring Bars with Square HSS Bits

The double-ended models listed by Industrial Shed use square HSS cutting bits in sizes matched to the holder.

Their 45° & 90° descriptions refer to documented working configurations, not a guarantee that every internal feature can be machined with the same tool.

Confirm the required bit size, holder dimensions & cutting orientation before purchasing. Tool-bit geometry must also suit the intended operation.

For related cutting accessories, Cutting Tools provides a broader workshop category.

Preventing Chatter During Internal Machining

Chatter can leave an unwanted surface pattern, affect dimensions & shorten cutting-tool life.

Several conditions may contribute, including excessive overhang, insufficient workpiece support, unsuitable cutting parameters or an unstable toolholder. Correcting one factor without checking the others may not solve the problem.

Review the complete setup, beginning with rigidity & clearance. Adjust cutting conditions only within the tool & machine manufacturers' recommendations.

Measuring a Finished Bore

An internal diameter should be checked using an instrument appropriate to the required tolerance.

A general-purpose caliper may be useful for some checks, but precision inspection can require a dedicated bore gauge, internal micrometer or another verified instrument.

Record the required diameter, tolerance & measurement method before machining begins. For related precision instruments, explore Precision Specialty Tools | Indicators.

Bore Depth, Shoulders & Internal Clearance

A bar that fits through the opening may still interfere with a shoulder or the bottom of a blind bore.

Before machining, identify the complete internal geometry. Allow for the cutting point, holder body, chip clearance & any required approach or withdrawal movement.

Restricted access can make tool positioning more important than the nominal bar diameter alone.

For supporting layout work, Measuring & Layout Tools provides related measuring equipment.

Coolant, Lubrication & Chip Control

Internal cutting can make chip evacuation more difficult because the cutting area is partly enclosed.

Suitable cutting fluid, chip management & machining parameters depend on the workpiece material, tool specification & machine setup. Avoid assuming that adding more lubricant will correct an unsuitable cutting condition.

For related fluid-handling products, browse Lubrication & Fluid Transfer.

For further metalworking context, read Complete Guide Abrasive Cutting Grinding Discs.

Tool Condition & Workshop Storage

A damaged cutting edge can affect the finish before the operator notices a significant change in cutting force.

Inspect boring bars & cutting bits before use. Protect tips from impacts, keep holders clean & remove unsuitable tooling from service.

For organised storage of small machining accessories, Drawer Organisers can help keep tool sizes identifiable.

For general workshop-care advice, read How to Clean Your Gear Without Ruining It.

Boring Bar Buying Checklist

Measure the Existing Opening

Establish the starting bore diameter & internal geometry. Confirm the bar can enter without interference.

Define the Finished Feature

Identify the required diameter, depth, shoulder or internal surface. Use the drawing to guide tool selection.

Select the Cutting Configuration

Compare carbide-tipped HEX & double-ended square-bit options. Match the format to the operation.

Confirm Toolholding Compatibility

Check shank dimensions, mounting method & available machine clearance. Secure positioning is essential.

Minimise Unnecessary Overhang

Choose a bar that reaches the feature without excessive extension. Follow the manufacturer's setup limitations.

Plan Dimensional Verification

Select the appropriate measuring method before cutting. Inspect the finished bore against the specified tolerance.

Common Boring Bar Buying Mistakes

Selecting by Diameter Alone

The bar must also suit bore depth, cutting orientation & holder compatibility. A nominal size does not describe the complete setup.

Using Too Much Overhang

Unnecessary extension can increase deflection & vibration. Keep the setup as rigid as the operation permits.

Confusing Boring with Drilling

A boring bar generally machines an existing opening. It is not automatically suitable for creating the initial hole in solid material.

Overlooking Cutting-Bit Compatibility

Double-ended holders require suitable square bits. Confirm the specified bit dimensions before ordering.

Measuring the Bore with an Unsuitable Instrument

A tool that can reach the opening may still lack the required accuracy. Match the measuring instrument to the tolerance.

Frequently Asked Questions About Precision Specialty Tools Boring Bars

What is a boring bar used for on a lathe?

A boring bar machines an internal surface within an existing hole or bore. It can support suitable bore enlargement, internal turning & related machining operations.

What types of boring bars are available in this collection?

Industrial Shed lists carbide-tipped HEX boring bars & double-ended configurations for square HSS bits. Their dimensions & operating arrangements vary by model.

What sizes are the carbide-tipped HEX boring bars?

The listed range includes metric sizes from 4 mm through 24 mm. Select a model according to bore access, rigidity & toolholding compatibility.

What does 45° & 90° mean on a double-ended boring bar?

These designations describe the listed working configurations of the holder. Confirm the actual cutting orientation & bit arrangement before use.

Can a boring bar create a hole from solid material?

Boring generally requires an existing opening. The initial hole is usually produced using another suitable machining process.

Why does a boring bar chatter?

Chatter can result from tool deflection, excessive overhang, workpiece movement or unsuitable cutting conditions. Review the complete machine setup rather than assuming the cutting edge is the only cause.

Are carbide-tipped boring bars suitable for every metal?

No, suitability depends on the cutting tool specification, material & operating conditions. Confirm the manufacturer's recommendations for the intended workpiece.

How should I measure a finished bore?

Use an instrument whose range, geometry & verified accuracy suit the specified tolerance. Critical internal dimensions may require dedicated bore-measuring equipment.

Why Buy Precision Specialty Tools Boring Bars From Industrial Shed?

Internal machining demands the correct balance of access, rigidity & cutting geometry. Industrial Shed's range offers multiple bar sizes & configurations for workshop lathe applications.

For trade purchasing arrangements, explore Trade exclusives. For eligible product support, visit Warranty & parts Support.

For broader equipment-maintenance insight, read Quarry Crews Crusher Maintenance.

Shop Boring Bars for Lathe Machining

A clean internal finish begins before the first cut. Measure the existing bore, confirm the required feature, match the toolholder & choose a cutting configuration that suits the machine.

Explore Precision Specialty Tools Boring Bars at Industrial Shed to compare carbide-tipped HEX models & double-ended square-bit options for your next machining job.

Why Buy From Industrial Shed?

Boring-bar selection becomes easier when bore access, required internal feature plus toolholding arrangement are established before ordering. Industrial Shed carries Precision Specialty Tools options across carbide-tipped plus double-ended configurations for workshop machining requirements.

For eligible trade customers purchasing machining plus workshop tooling, Alpha crew Member perks provides access to applicable member benefits. For help with product availability or selecting from the listed boring-bar sizes, Contact Us at supportHQ@industrialshed.net.au.

Choose around the actual bore plus machine setup. Correct bar size, cutting format plus working position provide a stronger starting point than selecting a boring tool from diameter alone.

Get Inside the Bore with the Right Tool

Internal machining rewards careful setup. Confirm access, match the boring bar to the operation plus measure progressively where the finished diameter matters.

✔ Check the bore – establish diameter, depth plus available access
✔ Choose the format – carbide-tipped or double-ended configuration
✔ Match the size – confirm bar, bit plus holder dimensions
✔ Control the setup – minimise unnecessary reach plus check clearance
✔ Verify the result – measure critical internal dimensions as required

Frequently Asked Questions

What is a boring bar used for on a lathe?

A boring bar is used to machine inside an existing hole or bore, including suitable internal-diameter plus internal-surface operations.

What boring bars does Industrial Shed currently carry?

The current Precision Specialty Tools range includes carbide-tipped HEX lathe boring bars plus double-ended 45°/90° boring bars using square HSS bits.

What sizes are the carbide-tipped boring bars?

Industrial Shed currently lists carbide-tipped HEX boring bars across multiple sizes from 4mm through 24mm.

What size bits do the double-ended boring bars use?

Precision Specialty Tooling documents square-bit sizes from 1/8" through 1/2", depending on the selected holder.

What does 45° plus 90° mean on the double-ended boring bars?

It refers to the two documented working configurations provided by the double-ended holder design.

Can a boring bar create a hole from solid material?

Boring generally machines an existing opening. The initial hole or opening is normally produced by another suitable machining method.

How do I choose the right boring bar?

Check the existing bore, required internal feature, bar size, cutting format, holder dimensions, working position plus machine compatibility.

Brands

► Precision Specialty Tools | Boring Bars

Machine Internal Diameters with Better Control & Access

The outside of a component may be easy to machine, but the real challenge often lies inside the bore. Limited clearance, tool deflection & restricted visibility make internal turning a demanding operation. Precision Specialty Tools Boring Bars give Australian machinists & engineering workshops a choice of carbide-tipped HEX bars & double-ended toolholder configurations for suitable lathe work.

A boring bar reaches into an existing opening to machine an internal surface or enlarge a bore. Unlike an ordinary external turning tool, it must operate within the available diameter while maintaining sufficient rigidity to produce the required finish.

Industrial Shed's range includes carbide-tipped HEX models in several sizes, plus double-ended bars designed for compatible square HSS cutting bits. Selecting the correct format begins with the actual hole, the internal feature being produced & the machine's toolholding arrangement.

For related machining equipment, browse Workshop & Engineering.

Carbide-Tipped HEX Boring Bars & Double-Ended Toolholders

The collection contains two main product families.

Carbide-tipped HEX lathe boring bars are listed in sizes including:

  • 24mm | LBBT24M

  • 19mm | LBBT19M

  • 17mm | LBBT17M

  • 13mm | LBBT13M

  • 10mm | LBBT10M

  • 8mm | LBBT08M

  • 6mm | LBBT06M

  • 5mm | LBBT05M

  • 4mm | LBBT04M

Double-ended boring bars include configurations described as 45° & 90°, with square-bit sizes from 1/8 inch to 1/2 inch across the listed models.

Examples include LBB1/8HSS, LBB3/16HSS, LBB1/4HSS, LBB5/16HSS, LBB3/8HSS & LBB1/2HSS.

These product groups should not be treated as interchangeable. Their cutting arrangements, holder dimensions & setup requirements differ.

Why Boring Bars Need Careful Sizing?

An oversized bar may not enter the existing hole. An unnecessarily slender bar can be more susceptible to deflection, especially when extended far beyond its support.

The ideal choice balances clearance against rigidity. The tool must reach the required depth without contacting surrounding surfaces, while remaining sufficiently supported for the cutting conditions.

A useful rule is to minimise unnecessary overhang within the manufacturer's permitted setup. Actual allowable reach depends on the bar, material, machine & operation.

For dimensional checks before selecting tooling, explore Precision Specialty Tools | Calipers.

Boring Bars Versus Drills – Different Jobs Inside a Hole

A drill commonly creates an initial opening in solid material. A boring bar is generally used to machine an existing opening, often to establish a required internal diameter or surface.

The operations may be performed in sequence, but they are not substitutes for one another. A boring tool requires enough initial access for its body & cutting geometry.

For compatible holemaking equipment, browse Air Drills. Machine-tool selection must still suit the required operation.

What Should You Look for in a Lathe Boring Bar?

The most useful boring bar is the one that reaches the internal feature without compromising the machining setup.

  • Existing bore: Confirm the starting diameter & available clearance.

  • Machining depth: Establish the required reach.

  • Bar size: Balance access against stiffness.

  • Cutting format: Compare carbide-tipped & square HSS-bit arrangements.

  • Toolholding: Verify shank geometry & compatible mounting.

  • Working orientation: Check the required cutting position.

  • Workpiece material: Match tooling & cutting conditions to the material.

  • Inspection: Plan how the finished bore will be measured.

For wider dimensional equipment, Testing & Measurement Tools supports the inspection stage.

Carbide-Tipped Boring Bars – Understanding the Application

Carbide-tipped bars provide a cutting arrangement intended for compatible internal-machining tasks.

Their suitability depends on the material, cutting geometry, tool size & operating conditions. The presence of a carbide tip does not automatically establish the correct speed, feed or maximum depth of cut.

Compare the selected model's specifications with the intended lathe operation before machining.

Double-Ended Boring Bars with Square HSS Bits

The double-ended models listed by Industrial Shed use square HSS cutting bits in sizes matched to the holder.

Their 45° & 90° descriptions refer to documented working configurations, not a guarantee that every internal feature can be machined with the same tool.

Confirm the required bit size, holder dimensions & cutting orientation before purchasing. Tool-bit geometry must also suit the intended operation.

For related cutting accessories, Cutting Tools provides a broader workshop category.

Preventing Chatter During Internal Machining

Chatter can leave an unwanted surface pattern, affect dimensions & shorten cutting-tool life.

Several conditions may contribute, including excessive overhang, insufficient workpiece support, unsuitable cutting parameters or an unstable toolholder. Correcting one factor without checking the others may not solve the problem.

Review the complete setup, beginning with rigidity & clearance. Adjust cutting conditions only within the tool & machine manufacturers' recommendations.

Measuring a Finished Bore

An internal diameter should be checked using an instrument appropriate to the required tolerance.

A general-purpose caliper may be useful for some checks, but precision inspection can require a dedicated bore gauge, internal micrometer or another verified instrument.

Record the required diameter, tolerance & measurement method before machining begins. For related precision instruments, explore Precision Specialty Tools | Indicators.

Bore Depth, Shoulders & Internal Clearance

A bar that fits through the opening may still interfere with a shoulder or the bottom of a blind bore.

Before machining, identify the complete internal geometry. Allow for the cutting point, holder body, chip clearance & any required approach or withdrawal movement.

Restricted access can make tool positioning more important than the nominal bar diameter alone.

For supporting layout work, Measuring & Layout Tools provides related measuring equipment.

Coolant, Lubrication & Chip Control

Internal cutting can make chip evacuation more difficult because the cutting area is partly enclosed.

Suitable cutting fluid, chip management & machining parameters depend on the workpiece material, tool specification & machine setup. Avoid assuming that adding more lubricant will correct an unsuitable cutting condition.

For related fluid-handling products, browse Lubrication & Fluid Transfer.

For further metalworking context, read Complete Guide Abrasive Cutting Grinding Discs.

Tool Condition & Workshop Storage

A damaged cutting edge can affect the finish before the operator notices a significant change in cutting force.

Inspect boring bars & cutting bits before use. Protect tips from impacts, keep holders clean & remove unsuitable tooling from service.

For organised storage of small machining accessories, Drawer Organisers can help keep tool sizes identifiable.

For general workshop-care advice, read How to Clean Your Gear Without Ruining It.

Boring Bar Buying Checklist

Measure the Existing Opening

Establish the starting bore diameter & internal geometry. Confirm the bar can enter without interference.

Define the Finished Feature

Identify the required diameter, depth, shoulder or internal surface. Use the drawing to guide tool selection.

Select the Cutting Configuration

Compare carbide-tipped HEX & double-ended square-bit options. Match the format to the operation.

Confirm Toolholding Compatibility

Check shank dimensions, mounting method & available machine clearance. Secure positioning is essential.

Minimise Unnecessary Overhang

Choose a bar that reaches the feature without excessive extension. Follow the manufacturer's setup limitations.

Plan Dimensional Verification

Select the appropriate measuring method before cutting. Inspect the finished bore against the specified tolerance.

Common Boring Bar Buying Mistakes

Selecting by Diameter Alone

The bar must also suit bore depth, cutting orientation & holder compatibility. A nominal size does not describe the complete setup.

Using Too Much Overhang

Unnecessary extension can increase deflection & vibration. Keep the setup as rigid as the operation permits.

Confusing Boring with Drilling

A boring bar generally machines an existing opening. It is not automatically suitable for creating the initial hole in solid material.

Overlooking Cutting-Bit Compatibility

Double-ended holders require suitable square bits. Confirm the specified bit dimensions before ordering.

Measuring the Bore with an Unsuitable Instrument

A tool that can reach the opening may still lack the required accuracy. Match the measuring instrument to the tolerance.

Frequently Asked Questions About Precision Specialty Tools Boring Bars

What is a boring bar used for on a lathe?

A boring bar machines an internal surface within an existing hole or bore. It can support suitable bore enlargement, internal turning & related machining operations.

What types of boring bars are available in this collection?

Industrial Shed lists carbide-tipped HEX boring bars & double-ended configurations for square HSS bits. Their dimensions & operating arrangements vary by model.

What sizes are the carbide-tipped HEX boring bars?

The listed range includes metric sizes from 4 mm through 24 mm. Select a model according to bore access, rigidity & toolholding compatibility.

What does 45° & 90° mean on a double-ended boring bar?

These designations describe the listed working configurations of the holder. Confirm the actual cutting orientation & bit arrangement before use.

Can a boring bar create a hole from solid material?

Boring generally requires an existing opening. The initial hole is usually produced using another suitable machining process.

Why does a boring bar chatter?

Chatter can result from tool deflection, excessive overhang, workpiece movement or unsuitable cutting conditions. Review the complete machine setup rather than assuming the cutting edge is the only cause.

Are carbide-tipped boring bars suitable for every metal?

No, suitability depends on the cutting tool specification, material & operating conditions. Confirm the manufacturer's recommendations for the intended workpiece.

How should I measure a finished bore?

Use an instrument whose range, geometry & verified accuracy suit the specified tolerance. Critical internal dimensions may require dedicated bore-measuring equipment.

Why Buy Precision Specialty Tools Boring Bars From Industrial Shed?

Internal machining demands the correct balance of access, rigidity & cutting geometry. Industrial Shed's range offers multiple bar sizes & configurations for workshop lathe applications.

For trade purchasing arrangements, explore Trade exclusives. For eligible product support, visit Warranty & parts Support.

For broader equipment-maintenance insight, read Quarry Crews Crusher Maintenance.

Shop Boring Bars for Lathe Machining

A clean internal finish begins before the first cut. Measure the existing bore, confirm the required feature, match the toolholder & choose a cutting configuration that suits the machine.

Explore Precision Specialty Tools Boring Bars at Industrial Shed to compare carbide-tipped HEX models & double-ended square-bit options for your next machining job.