Practical Support & Connection Hardware for Trade Installations
Need a bracket to reinforce a connection, locate a component or create a dependable fixing point? Hobson | Brackets covers professional bracket hardware for construction, timber connections, fabrication, maintenance & industrial applications. Hobson's wider hardware range includes sturdy angle brackets, slotted angle brackets, angled timber connectors, anchor bracket plates & wind bracing brackets, with different dimensions, hole configurations & finishes for different installation requirements.
Already working from a bolt or rod specification? Start with Hobson | Bolts & Nuts for associated fastening hardware, Hobson | Threaded Rods for threaded connections or Hobson | Washers where the assembly requires compatible washer hardware. Matching the bracket to its fasteners, connected materials & installation geometry from the beginning can prevent an avoidable second order.
What Are Hobson Brackets?
A bracket might look simple on the bench, but a few millimetres can decide whether the entire connection lines up on site. Hobson brackets & connectors provide shaped steel hardware for joining, supporting, locating or reinforcing components across construction & industrial work.
Within Hobson's documented hardware range, buyers can encounter:
► Sturdy angle brackets
► Slotted angle brackets
► Angled timber connectors
► D anchor bracket plates
► Wind bracing brackets
► Flat timber connectors
► Related connection hardware
Different shapes solve different problems. A sturdy right-angle bracket isn't automatically interchangeable with a slotted bracket, timber connector or wind bracing component simply because each product contains fixing holes.
Look beyond the shape & finish becomes another important distinction. Hobson's documented sturdy angle brackets, slotted angle brackets, angled timber connectors & D anchor bracket plates include hot dip galvanised configurations, while documented wind bracing brackets include zinc plated options.
Why Choose Hobson Brackets?
Getting the bracket right before drilling starts can save far more time than the component itself costs. Defined dimensions, hole sizing, material thickness, finish & bracket style give installers practical information for matching hardware to the connection.
Take Hobson's sturdy angle bracket range as an example. Documented configurations include compact M10 40 x 40 mm & 50 x 50 mm brackets alongside M12 versions extending through sizes such as 50 x 100 mm, 65 x 130 mm, 90 x 150 mm, 100 x 100 mm, 130 x 130 mm & 150 x 150 mm.
Slotted brackets tackle the geometry differently. Hobson's documented M16 slotted angle brackets include configurations such as 80 x 100 mm & 80 x 125 mm, with different material thicknesses available across relevant products.
Timber connections introduce another set of dimensions. Hobson documents angled timber connectors in configurations including M6, M12 & M12/M16, with options extending through 190 mm, 240 mm & 290 mm lengths.
Across the wider range, Hobson brackets can suit applications involving:
► Construction connections
► Timber assembly
► Fabrication
► Equipment mounting
► Repairs & maintenance
► Workshop projects
► Industrial installations
► General trade hardware requirements
Need fastening hardware around the bracket installation as well? Bolts & Fasteners provides a wider range of related trade components.
Common Applications
Imagine reaching site with the right bracket shape only to discover the holes don't suit the specified fastener. That small mismatch shows why the complete connection deserves attention before the bracket reaches the purchase order.
Timber construction can require purpose-shaped connectors between members. Hobson's documented angled timber connector range provides multiple lengths, dimensions & hole configurations for these types of assemblies.
Fabricators often approach bracket selection from geometry first. A sturdy angle bracket can provide a straightforward right-angle connection, while a slotted bracket may better suit an installation requiring its particular mounting configuration.
Bracing changes the conversation again. Hobson documents wind bracing brackets in sizes including M12/M16, M20, M24 & M30, making compatibility with associated bracing components an important consideration.
Replacement work usually starts with fewer answers. A bent, corroded or missing bracket may need to be identified from the existing hole pattern, connected materials, dimensions, finish & fastening arrangement.
Outdoor exposure brings coating choice into focus. Hot dip galvanised & zinc plated products have different coating characteristics, so confirm the finish required for the job rather than treating every grey metallic bracket as equivalent.
Got a connection that doesn't fit conventional bracket hardware? Specialty Fasteners & Fixings provides another pathway into specialist components.
Product Selection Guide
Start With the Connection Geometry
Sketch the connection before comparing brackets.
It doesn't need to be an engineering drawing. Record enough information to establish:
► What is being connected
► Required bracket orientation
► Available mounting surfaces
► Required leg dimensions
► Hole locations
► Fastener size
► Material thickness
► Available installation clearance
► Required finish
► Any project specification
Five minutes spent recording those details can save considerably more time than comparing brackets by eye.
Sturdy or Slotted Angle Bracket?
Similar shape doesn't mean identical function.
A sturdy angle bracket provides defined fixing-hole locations within a conventional angle-bracket configuration. Hobson documents sturdy brackets across multiple M10 & M12 sizes.
A slotted angle bracket introduces elongated fixing slots rather than relying solely on conventional round-hole positioning. Hobson's documented slotted range includes M16 configurations with holes specified to suit M16 hardware.
Ask one practical question before choosing: does the connection require fixed hole positioning or the geometry provided by the specified slotted bracket?
Check Hole Size Before Ordering the Fastener
“It's an M16 bracket” is much more useful than “it's a large bracket”.
A documented Hobson slotted angle bracket configuration measures 80 x 125 x 8 mm with two holes specified to suit M16 hardware. Another documented M16 configuration measures 80 x 100 x 10 mm.
Dimensions, hole specifications & manufacturer product identification give purchasing teams far more useful information than a photo alone.
Don't Ignore Bracket Thickness
Two brackets can share similar outside dimensions & still be different components.
Hobson's slotted angle range demonstrates this with relevant configurations across different material thicknesses. Thickness can influence fit, geometry & suitability for a specified assembly.
Where the connection is designed or load-sensitive, use the nominated product requirements rather than assuming a thicker bracket is automatically an acceptable substitute.
Match Timber Connectors to the Actual Joint
Start with the timber members rather than the connector catalogue.
Hobson's angled timber connectors include a broad dimensional spread, with documented configurations such as:
► M6 x 75 x 50
► M12 x 75 x 75
► M12 x 125 x 65
► M12 x 150 x 65
► M12 x 190 x 80
► M12 x 240 x 65
► M12 x 240 x 80
► M12 x 290 x 80
That variety makes one point clear: “timber bracket” isn't a complete parts specification.
Treat Wind Bracing as a Complete Assembly
A wind bracing bracket isn't simply another right-angle connector.
Hobson documents dedicated wind bracing brackets across M12/M16, M20, M24 & M30 configurations. The selected bracket needs to correspond with the associated bracing components & requirements of the installation.
Changing one component because another bracket looks similar can alter the connection in ways that aren't obvious from appearance.
Compare Finish With the Working Environment
A bracket may remain installed for years, so coating deserves attention before the job begins.
Hobson's documented bracket hardware includes hot dip galvanised & zinc plated products across relevant families.
Consider:
► Indoor or outdoor use
► Moisture exposure
► Surrounding materials
► Mating fasteners
► Existing hardware
► Project requirements
► Maintenance accessibility
Where corrosion protection matters, confirm the required finish instead of choosing whichever coating happens to be available.
Separate General Brackets From Structural Requirements
Does the drawing nominate a particular connection? Follow it.
Bracket dimensions, fastener grade, hole configuration, material, finish & associated hardware can form part of an engineered assembly. A general-purpose bracket shouldn't replace specified hardware simply because the dimensions appear close.
For fastening components used around structural connections, browse Structural Fasteners & Bolts.
Which Hobson Bracket Should You Start With?
Different bracket shapes point towards different connection requirements.
|
Bracket Type
|
Typical Role
|
Check Before Ordering
|
|
Sturdy Angle Bracket
|
Right-angle connection or support
|
Leg dimensions, hole size, fastener & finish
|
|
Slotted Angle Bracket
|
Angled connection using slotted mounting geometry
|
Slot configuration, dimensions, thickness & fastener size
|
|
Angled Timber Connector
|
Connection between timber members
|
Joint geometry, connector dimensions, holes & fastening arrangement
|
|
D Anchor Bracket Plate
|
Application-specific anchor bracket connection
|
Plate dimensions, hole arrangement, fastener & installation requirement
|
|
Wind Bracing Bracket
|
Connection within compatible bracing arrangements
|
Bracing system, thread size, associated components & specification
|
Use the table to identify the likely bracket family, then confirm the individual dimensions & connection requirements before ordering.
Expert Tips
Take Three Measurements Before Taking One Guess
Width, height & thickness can separate two otherwise similar-looking brackets very quickly.
Add hole diameter, slot dimensions & centre spacing where relevant, then photograph the bracket beside a ruler or tape measure. Purchasing now has useful evidence instead of “medium galvanised angle bracket”.
Accurate measurements make both replacement identification & new installations easier. Measuring & Leveling Tools can support layout, dimensional checks & installation work.
Use the Existing Hole Pattern as Evidence
Replacing an old bracket? Don't throw away one of your best identification references.
Existing holes can reveal:
► Fastener diameter
► Hole spacing
► Bracket orientation
► Connected member position
► Number of fixing points
► Potential replacement dimensions
That information becomes especially valuable when product markings have disappeared after years of service.
Look at the Fastener Before Blaming the Bracket
Movement at a connection doesn't automatically mean the bracket has failed.
Inspect the bracket, bolt or screw, nut, washer, connected material & surrounding holes together. Elongation, corrosion, loose hardware or damaged material can point towards a wider connection problem.
Why Good Fasteners Matter More Than the Tool You Drive Them With looks more closely at why the surrounding fastening hardware deserves equal attention.
Don't Drill a New Hole Just to Make the Wrong Bracket Fit
A near match becomes tempting when the crew is waiting.
Before modifying a bracket, confirm whether the hole configuration, edge distances, material thickness or product geometry matters to the intended connection.
Alterations to engineered or specification-sensitive brackets should be checked before installation rather than improvised on site.
Keep the Coating Consistent With the Job
Fresh galvanising is easy to recognise. Years of exposure can make identification much less obvious.
Retain the original product details where possible rather than relying solely on colour. Hot dip galvanised & zinc plated products shouldn't be treated as interchangeable simply because both may appear grey.
Lay Out Multiple Brackets Before Final Tightening
One bracket can be positioned correctly while a complete row slowly drifts out of alignment.
Check line, level, spacing & orientation before final tightening where several brackets support the same assembly. Small positioning errors can compound across longer installations.
That extra check can be particularly useful with slotted brackets, repeated timber connections & fabricated support arrangements.
Keep Bracket Storage Easy to Read
A mixed crate of steel brackets turns a straightforward restock into a sorting job.
Separate sturdy angles, slotted brackets, timber connectors & specialist brackets, then retain product codes & dimensions on the storage location where practical. Crews can identify what they need without comparing several nearly identical components.
Busy periods are easier when common hardware is already organised. Spring Jobsite Prep Getting Your Gear Ready covers practical preparation across tools, equipment & consumables.
Check Both Sides of the Connection
The visible bracket tells only half the story.
Find out what the fastener is threading into, passing through or anchoring to. Nut access, washer position, material condition, member thickness & installation clearance can all determine whether the planned assembly is practical.
Need a refresher on the surrounding hardware? Fastener Guide Bolts Screws Anchors covers broader fastener identification & selection.
Stop at the Drawing When the Connection Is Engineered
Some bracket decisions can be made at the bench. Others need to follow the documented connection.
Wind bracing, structural connections & other load-sensitive assemblies may nominate particular hardware, dimensions, finishes or installation requirements.
Where a proposed substitution changes the specified assembly, confirm the change through the appropriate project or engineering channel before proceeding.
