► Alemlube | DPX End Divider Sections

Clean, Controlled Grease Flow Termination for Progressive Lubrication Systems DPX end divider sections complete the flow path of a progressive lubrication block by sealing the final stage of the metering system. Without a stable end divider, grease flow becomes inconsistent, pressure drops occur & system faults become more likely. Alemlube...

Clean, Controlled Grease Flow Termination for Progressive Lubrication Systems

DPX end divider sections complete the flow path of a progressive lubrication block by sealing the final stage of the metering system. Without a stable end divider, grease flow becomes inconsistent, pressure drops occur & system faults become more likely. Alemlube DPX end divider sections are engineered for toughness, precision & clean sealing, ensuring your lubrication block performs reliably across every lubrication cycle.

These components integrate naturally into heavy-duty lubrication systems installed around Hydraulic Equipment, mounted near mechanical bays supported by Lifting Equipment. Many workshops position their lubrication control blocks beside repair stations equipped with Shop Presses & Vices, while automotive & machinery techs rely on surrounding systems supported by Automotive Electrical Services. Diagnostics crews use tools located under Vehicle Diagnostic & Testing Tools & lubrication flow checks run through systems linked to Engine Oil Circulation & Filtration. With Same day dispatch & continuous support from tool & equipment Care, your lubrication system stays sealed, stable & consistent.

What’s in This Collection:

► DPX end divider sections
‣ Terminates progressive lubrication blocks with reliable pressure sealing.

► High-pressure end housings
‣ Built for harsh equipment environments with dust, heat, vibration & load.

► End caps with fault detection compatibility
‣ Works with visual indicators or pressure signal units for fast troubleshooting.

► Seal-protected outlet ends
‣ Prevents backflow or contamination entry into the metering system.

► Replacement end segments
‣ Maintains block integrity without replacing full assemblies.

► Mounting hardware, gaskets & sealing components
‣ Ensures clean, long-term system installation on any machinery frame.

 

Sidebar

Refined by Clear all

Clear all

Product Type

Brands

Clear all

Price

$
to
$
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Alemlube - Dpx105 End Divider Section Including Prox/Plug | 2.C.105.D.3I.M10.M12
    Alemlube - Dpx105 End Divider Section Including Prox/Plug | 2.C.105.D.3I.M10.M12
    Alemlube DMX Modular Metering Valve with M12 Sensor – 1050mm³/Cycle | 2.C.105.D.3I.M10.M12 The Alemlube 2.C.105.D.3I.M10.M12 is a high-output progressive metering valve with integrated M12 inductive sensor. It delivers 1050mm³ per cycle and provides real-time monitoring for advanced lubrication systems. Key Features 1050mm³ output per...
    $301.51
    $0.00
    $301.51
  • Alemlube - Dpx105 End Divider Section | 2.C.105.D.1N.M10
    Alemlube - Dpx105 End Divider Section | 2.C.105.D.1N.M10
    Alemlube DMX Modular Metering Valve – 1050mm³/Cycle M10 Outlet | 2.C.105.D.1N.M10 The Alemlube 2.C.105.D.1N.M10 is a high-output progressive metering valve delivering 1050mm³ per cycle, designed for large lubrication points and heavy-duty applications. Key Features 1050mm³ output per cycle M10 outlet connection Designed for heavy-duty...
    $160.27
    $0.00
    $160.27
  • Alemlube - Dpx75 End Divider Section Including Prox/Plug | 2.C.075.D.3I.M10.M12
    Alemlube - Dpx75 End Divider Section Including Prox/Plug | 2.C.075.D.3I.M10.M12
    Alemlube DMX Modular Metering Valve with M12 Sensor – 750mm³/Cycle | 2.C.075.D.3I.M10.M12 The Alemlube 2.C.075.D.3I.M10.M12 combines high output with electronic monitoring, delivering 750mm³ per cycle while providing system feedback via an M12 inductive sensor. Key Features 750mm³ output per cycle M12 inductive sensor for...
    $301.51
    $0.00
    $301.51
  • Alemlube - Dpx75 End Divider Section | 2.C.075.D.1N.M10
    Alemlube - Dpx75 End Divider Section | 2.C.075.D.1N.M10
    Alemlube DMX Modular Metering Valve – 750mm³/Cycle M10 Outlet | 2.C.075.D.1N.M10 The Alemlube 2.C.075.D.1N.M10 delivers 750mm³ per cycle, making it ideal for larger lubrication points requiring higher grease or oil volume. Key Features 750mm³ output per cycle M10 outlet connection Progressive lubrication system compatibility...
    $160.27
    $0.00
    $160.27
  • Alemlube - Dpx45 End Divider Section Including Prox/Plug | 2.C.045.D.3I.M10.M12
    Alemlube - Dpx45 End Divider Section Including Prox/Plug | 2.C.045.D.3I.M10.M12
    Alemlube DMX Modular Metering Valve with M12 Sensor – 450mm³/Cycle | 2.C.045.D.3I.M10.M12 The Alemlube 2.C.045.D.3I.M10.M12 is a progressive metering valve with integrated M12 inductive sensor for electronic monitoring. It delivers 450mm³ per cycle while providing real-time system feedback. Key Features 450mm³ output per cycle...
    $301.51
    $0.00
    $301.51
  • Alemlube - Dpx45 End Divider Section | 2.C.045.D.1N.M10
    Alemlube - Dpx45 End Divider Section | 2.C.045.D.1N.M10
    Alemlube DMX Modular Metering Valve – 450mm³/Cycle M10 Outlet | 2.C.045.D.1N.M10 The Alemlube 2.C.045.D.1N.M10 is a progressive modular metering valve delivering 450mm³ of lubricant per cycle. Designed for automatic lubrication systems, it ensures precise oil or grease distribution to critical components. Key Features 450mm³...
    $160.27
    $0.00
    $160.27
  • Alemlube - Dpx25 End Divider Section | 2.C.025.D.1N.M10
    Alemlube - Dpx25 End Divider Section | 2.C.025.D.1N.M10
    Alemlube DMX Modular Metering Valve – 250mm³/Cycle M10 Outlet | 2.C.025.D.1N.M10 The Alemlube 2.C.025.D.1N.M10 is a modular progressive metering valve designed to deliver precise lubrication in automatic oil and grease systems. With a 250mm³ output per cycle and M10 outlet configuration, it ensures accurate...
    $160.27
    $0.00
    $160.27

End Divider Components Built for Crews Who Maintain Machinery Under Load Every Day

In a progressive lubrication system, the end section plays a critical role by sealing the final chamber of the block & ensuring pressure stays stable across every lubrication point. If the end divider weakens, grease bypasses the system, pressure drops occur & failures become harder to detect. Alemlube DPX end divider sections eliminate these issues with precise machining, strong materials & reliable sealing engineered for high-duty environments.

Workshops & mobile servicing crews across Melbourne, Geelong, the Mornington Peninsula & regional Victoria rely on DPX end sections to maintain lubrication networks across loaders, excavators, crushers, conveyors, transport fleets, ag machinery, manufacturing lines & earthmoving plant. When equipment runs long hours in dusty, hot or high-impact environments, a weak end section can compromise the entire lubrication block. Alemlube DPX end divider sections help prevent this by delivering stable sealing across every cycle.

DPX end sections integrate naturally into daily servicing routines tied to Car Repair & Maintenance, technician workflows supported by Hand Tools For Auto Repair & broader workshop processes under Tyre & Wheel Services. When your day involves lubrication system checks, mechanical repair, diagnostics, rebuilds or preventative maintenance, stable end dividers keep your lubrication network safe & predictable.

With Same day dispatch, urgent replacements arrive quickly, while tool & equipment Care supports correct installation, sealing techniques, contamination prevention & pressure-test best practices.

► Strong sealing for accurate progressive lubrication
► Built for harsh industrial, mobile & high-load environments
► Prevents pressure loss & improves lubrication reliability
► Fast dispatch & long-term durability

Frequently Asked Questions

Yes. A stable end section seals the block & helps maintain consistent internal pressure.

Yes. They are engineered for heavy equipment that runs high-pressure lubrication circuits.

Only when seals wear or pressure variations become noticeable.

Brands

Alemlube

Alemlube