High-Strength Acrylic Mounting Tape

When the fixing needs to stay hidden but the application demands more from the adhesive, Surepak Very Hi-Bond Double Sided Tape provides a high-performance option for suitable signage, fabrication, fit-out, panel mounting & production assembly work.

Surepak's Stylus Very Hi-Bond range uses clear acrylic foam tape designed for bonding a broad range of compatible substrates across indoor & outdoor applications. The clear 1 mm construction is particularly relevant where installers want a discreet bond without visible screws, rivets or bulky fixing hardware.

For applications needing a more general foam-backed solution, Surepak | Double Sided Foam Tape provides another bonding option. Where the job specification calls for physical fastening instead, Specialty Fasteners & Fixings covers the mechanical route.

Very high bond tape makes the most sense when the surfaces, load & environment justify it—not simply because “stronger” sounds safer.

What Is Very Hi-Bond Double Sided Tape?

Very hi-bond double sided tape is a high-performance acrylic foam bonding tape designed to sit between two compatible surfaces.

Rather than leaving a fastener visible through the face of the component, the adhesive layer remains concealed inside the assembly.

Surepak's Stylus clear Very Hi-Bond acrylic tape is available in 1 mm thickness, with manufacturer-listed widths including:

► 12 mm
► 18 mm
► 24 mm

The wider Surepak range positions these products for bonding a broad range of substrates across indoor & outdoor applications.

That makes this style of high-strength double sided tape relevant to buyers searching for solutions around:

► Sign mounting
► Display assembly
► Panel attachment
► Decorative trims
► Fabricated components
► Nameplates
► Retail fit-outs
► Production assembly
► Interior fixtures
► Suitable exterior mounting

The important word remains suitable.

High-performance adhesive doesn't remove the need to check the substrate, load, available bonding area, surface preparation & environmental exposure.

Why Choose Very Hi-Bond Acrylic Tape?

Keep the Fastening System Out of Sight

A visible screw can be completely acceptable on workshop equipment.

On a polished sign, retail display or decorative panel, it may become an unwanted design feature.

Clear double sided mounting tape provides another approach for compatible assemblies by placing the bond behind the component.

That can produce a cleaner face without drilling through the visible surface.

Acrylic Foam Creates a Different Bonding Interface

Very hi-bond acrylic tape shouldn't be treated as simply a more aggressive version of ordinary stationery tape.

Its acrylic foam construction creates a bonding layer capable of conforming to minor surface variation while maintaining contact between suitable mating materials.

For sign makers, fabricators & production businesses, that makes the surface pair more important than the generic description “double sided tape”.

Useful Indoors & Outdoors Where the Product Specification Allows

Surepak positions its Stylus Very Hi-Bond acrylic range for a broad range of substrates in indoor & outdoor applications.

Exterior use introduces additional considerations, however.

Temperature changes, moisture, UV exposure, movement between materials & the orientation of the load all deserve attention before installation.

“Outdoor capable” shouldn't be interpreted as “suitable for every exterior job”.

Common Applications

Sign Makers: Clear Mounting Without Visible Fixings

For sign businesses, the mounting method affects both appearance & installation.

A suitable high bond tape for signage can help secure compatible signs, lettering, plaques or display components while keeping the fixing behind the finished face.

Clear acrylic foam can be particularly useful where the bonding line may otherwise be visually distracting.

Before standardising it for a sign system, test the actual sign material against the actual mounting substrate.

Shopfitters: Panels, Trims & Displays

Retail & commercial interiors frequently combine presentation with installation speed.

A suitable very high bond mounting tape can be considered for selected panels, trims, display components & point-of-sale fixtures where concealed adhesive attachment fits the design.

Not every component should be tape-mounted.

For installations requiring brackets, screws or other conventional attachment, Mounting Hardware provides another pathway.

Fabricators: Bonding Compatible Metal & Finished Components

“Will it stick to metal?” isn't specific enough.

Bare aluminium, stainless steel, painted steel & powder-coated components can present different bonding conditions.

Anyone looking for high bond double sided tape for metal should consider the complete substrate finish rather than the base material alone.

Preparation also matters.

Cutting, grinding, handling & fabrication can leave contamination on components before bonding. Metal Cutting & Grinding Tools supports the earlier fabrication stages, but the bonding surface needs to be properly prepared before adhesive installation.

Production & Assembly: Repeatability Matters

A tape used once is an installation.

A tape used every day becomes a manufacturing process.

Businesses using industrial double sided tape for repeated assembly should control:

► Surface preparation
► Tape width
► Tape position
► Application pressure
► Component alignment
► Handling after assembly
► Final inspection

Workshop Equipment supports the broader work environment where repeatable preparation & assembly processes take place.

Product Selection Guide

Are You Looking for High Bond Tape or General Foam Tape?

This distinction is worth making early.

General double sided foam tape can be useful where conformability, spacing & everyday mounting are the main requirements.

A very hi-bond acrylic foam tape belongs in the conversation when the application demands a higher-performance adhesive system.

Don't automatically upgrade every mounting job.

Match the tape technology to the actual requirement.

What Two Surfaces Are Being Bonded?

Write the combination down.

For example:

painted metal → acrylic panel

metal → metal

sign substrate → finished wall panel

decorative trim → fabricated component

display component → smooth fixture

This immediately produces a more useful selection question than:

“What's your strongest double sided tape?”

Adhesive performance depends on what it is actually being asked to grip.

Does Clear Tape Matter?

Sometimes transparency is irrelevant because the entire bond line is concealed.

Other applications can leave an edge or section visible through transparent or translucent materials.

In those situations, clear acrylic mounting tape can offer an aesthetic advantage over a visibly coloured foam carrier.

Appearance should still come after suitability.

Is 1 mm Thickness Appropriate?

Surepak's listed Stylus Very Hi-Bond clear acrylic products use a 1 mm acrylic foam construction.

That thickness creates a defined bonding layer between components while providing some conformability.

It isn't intended to compensate for severe gaps, heavily uneven masonry or badly distorted parts.

If two surfaces can't make appropriate contact, reconsider the installation rather than expecting adhesive thickness to solve the geometry.

Which Tape Width Fits the Component?

Surepak lists 12 mm, 18 mm & 24 mm variants in this Very Hi-Bond clear acrylic range.

Width influences the amount of bonding surface available, but choosing a wider tape alone doesn't validate the application.

Consider:

► Available mounting area
► Component dimensions
► Load
► Load direction
► Substrate compatibility
► Environmental exposure
► Edge clearance
► Installation method

Will It Be Used Outside?

For an outdoor mounting application, look beyond the word “outdoor”.

Consider what the installed assembly will actually experience.

Is it exposed to direct weather?

Temperature cycling?

Different materials expanding at different rates?

Constant load?

Vibration?

The individual tape specification & complete installation need to suit those conditions.

High-Bond Tape Application Guide

The right high-bond tape is application-specific.

A demanding job deserves a more precise question than “Will this stick?”

Expert Tips

Make the Substrate Pair Your Starting Point

Don't order around a vague application such as “mounting panels”.

Define:

what the panel is made from + what it's being attached to.

That small change makes product selection far more meaningful.

Prepare the Surface Before Measuring the Tape

A high-performance adhesive can't bypass oil, dust, moisture or loose surface contamination.

Treat preparation as part of the installation—not an optional cleaning step once everything else has been decided.

How To Clean Your Gear Without Ruining It provides broader guidance around matching cleaning practices to the materials involved.

Avoid Testing Adhesion With Your Fingers

Peeling a corner & deciding that the tape “feels really sticky” doesn't reproduce the final assembly.

What matters is performance between the intended substrates under the intended conditions.

Build a representative test instead.

Pressure-Sensitive Means Pressure Matters

Good adhesive contact requires proper application.

Position the tape carefully & follow the relevant installation guidance for applying pressure across the bond.

Don't casually place two surfaces together & expect the tape to correct poor installation.

Think in Loads, Not Just Weight

Two components can have the same mass while loading an adhesive joint differently.

The orientation of the component, direction of force, leverage & movement can change what the bond experiences.

That becomes increasingly important as the application becomes more demanding.

Don't Automatically Use the Highest-Performance Tape Everywhere

Over-specifying consumables can increase costs without improving the finished job.

Use very hi-bond tape where its properties solve a genuine installation requirement.

For simpler applications, a standard foam mounting tape may be entirely appropriate.

The Hidden Cost of 'I Can Get It Cheaper Online explores why purchasing decisions work better when total job value is considered rather than unit price alone.

Turn Successful Installations Into a Standard

If your business repeatedly produces the same sign, panel or assembly, document what worked.

Record the tape, surface preparation, placement & installation method.

That reduces variation between operators & makes future purchasing more predictable.

A tool is not just a tool. It’s a promise. explores the broader value of selecting working products around dependable outcomes.