Hole Saws, Saw Blades & Cutting Solutions for Trade Work
What makes a saw blade cut cleanly instead of running hot, vibrating or wearing out too early? Usually, the answer starts before the machine is switched on. Starrett Saws cover professional cutting across metal, timber, plastics & other workshop materials, with hole saws, jig saw blades, hacksaw blades & band saw solutions designed around different machines, workpiece profiles & cutting demands.
Buying for a particular saw? Start with Saws | Hand & Power. Building out the machine or power-tool setup as well? Power Tool Accessories covers the supporting equipment used around powered cutting.
For a faster buying decision, establish four things first: material, thickness or section, cut type & machine.
What Are Starrett Saws?
Cutting Tools Built Around Different Materials & Machines
Starrett's saw range extends from circular penetrations with hole saws through to portable & workshop band sawing.
Depending on the application, buyers may be comparing:
► Bi-metal hole saws for versatile trade cutting
► Deep-cut hole saws where additional cutting depth is required
► Carbide-tipped hole saws for demanding materials & applications
► Hole saw kits grouping commonly used sizes
► Jig saw blades for straight, curved & detailed cuts
► Hacksaw blades for controlled manual cutting
► Portable band saw blades for powered cutting away from stationary machinery
► Industrial band saw blades for workshop, maintenance & production sawing
► Bi-metal, carbon, carbide-tipped & carbide-grit blade technologies across suitable applications
One blade doesn't need to do everything.
It needs to suit what you're cutting & the machine doing the work.
Choose the Saw by the Cut
Cutting a Hole?
Diameter is only the first specification.
Check the substrate, workpiece thickness & required cutting depth before choosing the hole saw.
A suitable bi-metal design can cover a broad range of everyday trade penetrations. Deeper sections or more demanding materials may shift the decision towards another tooth geometry or carbide design.
A hole saw with the correct diameter can still be the wrong saw if it can't handle the material or depth.
Cutting Sheet, Tube or Bar?
Workpiece profile changes tooth engagement.
Thin sheet needs enough teeth in contact to maintain a controlled cut.
Tube repeatedly changes tooth engagement as the blade passes through its walls.
Solid bar produces a more continuous cutting load & different chip-clearance demands.
Where sawing is followed by dressing, bevelling or surface preparation, Metal Cutting & Grinding Tools supports the next stage.
Need Curves Rather Than Straight Cuts?
Jig saw blade choice goes beyond wood versus metal.
Blade width influences turning ability.
Blade thickness affects stability.
Tooth pitch helps determine how the blade interacts with the material.
A narrow blade can negotiate tighter curves, while a more substantial blade can provide greater stability where keeping the cut straight matters more.
Running a Workshop Band Saw?
Start with machine compatibility before comparing tooth patterns.
Then work through:
► Material
► Solid, tube or profile construction
► Section size
► Blade dimensions
► Tooth pitch
► Required finish
► Cutting volume
► Blade-life expectations
Workshop Equipment supports the wider machine-shop, maintenance & fabrication environment around stationary cutting equipment.
Starrett Saw Selection Guide
|
Cutting job
|
Start with
|
Check before buying
|
|
Circular openings
|
Hole saw
|
Material, diameter & cutting depth
|
|
General trade penetrations
|
Bi-metal hole saw
|
Substrate & thickness
|
|
Deeper penetrations
|
Deep-cut hole saw
|
Required depth & material
|
|
Demanding substrates
|
Suitable carbide hole saw
|
Exact material compatibility
|
|
Curves & contours
|
Jig saw blade
|
Material, TPI, width & thickness
|
|
Manual metal cutting
|
Hacksaw blade
|
Material, section & TPI
|
|
Mobile powered metal cutting
|
Portable band saw blade
|
Machine compatibility & material
|
|
Workshop sawing
|
Band saw blade
|
Blade dimensions, profile & pitch
|
|
Production cutting
|
Performance band saw blade
|
Output, material & blade life
|
Fast Cut or Deep Cut Hole Saw?
The names describe different priorities.
Fast Cut Bi-Metal hole saws suit fast, smooth general-purpose cutting across compatible materials.
Deep Cut Bi-Metal hole saws provide greater cutting depth for more substantial workpieces & use a progressive tooth arrangement.
Think about the section in front of the drill.
Thin sheet presents a different requirement from thick-wall tube, timber or another deep workpiece.
Installers moving regularly between cutting, fixing & fit-off can also use Plumbing Tool Essentials to look at the wider tool kit surrounding penetration work.
Bi-Metal or Carbide?
Bi-metal provides a versatile starting point for many professional cutting applications because it combines a hard cutting edge with a tougher supporting material.
That construction appears across multiple Starrett saw categories.
Carbide becomes relevant when the substrate or workload places different demands on the cutting edge.
Selected carbide-tipped hole saws address demanding & specialised materials, while industrial band saw ranges extend carbide technology into harder or more abrasive cutting applications.
Don't choose carbide simply because it sounds like an upgrade.
Choose it when the material gives you a reason to.
Understanding TPI
TPI means teeth per inch.
It affects how many teeth engage the workpiece & how much space is available between them for chip formation.
As a practical starting point:
► Thinner sections generally move towards finer tooth pitches
► Thicker sections can accommodate coarser pitches with more chip space
► Variable-pitch blades can help across changing sections & cutting conditions
► Tube & profiles require extra attention because tooth engagement changes throughout the cut
Material, section shape, blade type & machine conditions still need to be considered together.
Where Starrett Saws Fit on the Job?
Fabrication Shops
Sawing is often the first irreversible operation after measuring & layout.
Tube, bar, sheet & structural profiles may be cut before drilling, grinding, welding or assembly.
Getting that first cut under control helps reduce unnecessary heat, rough edges & avoidable finishing work further down the job.
For components moving from cutting into assembly, Welding Equipment supports the joining stage.
Maintenance Crews
Breakdown work rarely supplies one predictable material all day.
A technician might shorten tube, modify a bracket, remove damaged material or make a new penetration during the same repair.
Versatility matters, but so does knowing when the material requires a more specialised blade.
Emergency Worksite Breakdown Support looks at the wider challenge of keeping crews equipped when downtime wasn't on the schedule.
Plumbing, Electrical & Installation
A hole saw that worked perfectly yesterday may meet a completely different substrate today.
Sheet metal, timber, plastics & other building materials create different cutting conditions.
Trade kits make commonly used diameters easier to organise, but the individual saw still needs to suit the material being penetrated.
Carpentry & Fit-Out
Is speed the priority, or will the cut remain visible?
That question changes blade selection.
Jig saw tooth count, width & thickness influence cutting rate, finish & manoeuvrability, making blade choice part of the finished result rather than a last-minute accessory decision.
For another material-led approach to trade cutting, Best Circular Saws Framing 2026 explores circular saw selection around framing work.
Before You Order
Confirm the Machine
Replacement band saw blades need to match the machine's required:
► Blade length
► Blade width
► Blade thickness
Two machines performing similar work don't necessarily accept the same blade.
Be Specific About the Material
“Metal” doesn't narrow the decision enough.
Mild steel, stainless, aluminium & harder alloys can present different cutting demands.
The same principle applies to timber, plastics & abrasive materials.
Decide Whether Speed or Finish Matters More
Some cuts only need to separate stock efficiently.
Others need to minimise secondary finishing.
Where the cut remains visible or moves directly into another precision operation, stability & finish deserve more weight.
Expert Tips
Heat Is Information
A blade running excessively hot is telling you something.
Check blade condition, tooth selection, cutting speed, feed & material compatibility before responding with more pressure.
Give the Teeth Room to Clear the Cut
Teeth don't only remove material — they have to carry chips away.
Too fine a pitch through a thick section can restrict chip space, while excessively coarse teeth on thin material can create unstable engagement.
Treat Stainless as Its Own Cutting Job
Poor cutting conditions can create excess heat & encourage work hardening.
Use a blade intended for the material, follow appropriate machine guidance & keep the teeth cutting rather than rubbing.
Check the Pilot Before Blaming the Hole Saw
A worn pilot drill or unsuitable arbor setup can affect starting, location & control.
Treat the arbor, pilot & hole saw as one cutting system.
Look at Depth as Well as Diameter
Diameter gets the attention.
Depth can stop the job.
Check both before ordering a hole saw for thicker material.
Replace Worn Teeth Before They Rewrite the Cutting Process
Slow cutting, excess heat, vibration & deteriorating finish shouldn't become the new normal just because a blade is still technically moving through material.
For metalworkers comparing different cutting consumables, Complete Guide Abrasive Cutting Grinding Discs covers the abrasive side of cutting & grinding selection.
Keep Spare Blades Ready Without Damaging Them
Replacement blades are only useful if their teeth survive storage.
Keep sizes identifiable & cutting edges protected rather than burying them underneath general workshop hardware.
Tools Storage & Organization supports a cleaner system for blades, accessories & other workshop consumables.