► Sando | Soft Face Sledge Hammer

Non-Marking Striking Tools for Controlled Assembly Work Across fabrication workshops, mechanical assembly bays & industrial maintenance environments, Sando soft face sledge hammers are used where force is required without damaging finished surfaces. Also known as non-marking sledge hammers or soft head striking tools, they deliver heavy-duty impact while protecting materials...

Non-Marking Striking Tools for Controlled Assembly Work

Across fabrication workshops, mechanical assembly bays & industrial maintenance environments, Sando soft face sledge hammers are used where force is required without damaging finished surfaces. Also known as non-marking sledge hammers or soft head striking tools, they deliver heavy-duty impact while protecting materials from dents, marks & deformation.

Supplying trades across Australia, Industrial Shed stocks Sando soft face sledge hammers for professionals who need reliable striking tools for precision assembly, fitting & maintenance work. From seating bearings to aligning fabricated steel or installing machinery components, these hammers provide controlled impact without the rework caused by surface damage.

On site & in workshop conditions, these tools are used alongside Hammers for controlled striking, combined with Bolts & Fasteners during assembly, & supported by Hand Tools for general mechanical work. Before final alignment, materials are typically prepared using Metal Cutting & Grinding Tools, secured with Fabrication Tools & Workholding, welded using Welding Machines, then finished on Workbenches using soft face impact tools.

When the job calls for force without damage, this range is built to handle it.

What’s in This Collection

► Sando soft face sledge hammers
‣ Designed for heavy striking where impact force is required without damaging finished surfaces

► Replaceable soft hammer faces
‣ Extends tool life by allowing worn striking faces to be replaced instead of the full tool

► Dual-face non-marking heads
‣ Delivers consistent, balanced impact while protecting materials from dents & deformation

► Heavy-duty soft impact hammers
‣ Built for repeated use across fabrication, mechanical & industrial environments

► Controlled force striking tools
‣ Ideal for seating components, aligning assemblies & fitting parts without surface damage

► Assembly & fitting hammers
‣ Used during final stages of mechanical & fabrication workflows

► Non-sparking & non-damaging strike surfaces
‣ Suitable for sensitive components, finished materials & precision work

Within workshop setups, these hammers are typically paired with steel striking tools, allowing trades to switch between raw force & controlled impact depending on the stage of work.

Trade Applications for Sando Soft Face Sledge Hammers

► Bearing seating & mechanical assembly
 ‣ Applies controlled force to seat bearings, bushings & components without damaging tolerances

► Fabrication alignment after welding
 ‣ Adjusts steel components after cutting, grinding & welding without marking finished surfaces

► Machinery maintenance & servicing
 ‣ Repositions components without damaging housings or equipment

► Precision fitting & installation
 ‣ Ensures clean assembly without dents, scratches or rework

► Construction finishing work
 ‣ Handles final adjustments where surface finish must remain intact

► Industrial equipment setup
 ‣ Positions heavy components accurately without surface damage

In environments where finish quality matters, these hammers become essential.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Showing 0 of 0 products

No products found
Use fewer filters or clear all

Built for Fabrication, Assembly & Industrial Maintenance Workflows

Step into any active workshop & it becomes clear how important final-stage accuracy is. After cutting, grinding & welding, one incorrect strike can undo hours of work. This is exactly where soft face sledge hammers prove their value.

Across Australia, Industrial Shed supplies Sando tools to fabrication teams, mechanical workshops & maintenance crews relying on non-marking striking tools daily. Positioned on Workbenches, used alongside Material Handling Equipment, or applied across Commercial Construction environments, these hammers support precision from workshop to site.

Every stage benefits from consistency. Delivering the same controlled impact every time helps reduce rework, maintain finish quality & keep jobs moving without interruption.

When wear sets in, delays follow quickly. With Same day dispatch, replacement Sando tools reach site fast. Over time, proper tool & equipment Care ensures replaceable hammer faces last longer under constant use.

For trades needing precision impact without compromise, Sando delivers.

Why Trade Professionals Choose Industrial Shed

► Trade grade non-marking hammers built for precision impact work
► Reliable performance across fabrication, assembly & maintenance
► Replaceable components for extended tool life
► Fast nationwide delivery to reduce downtime

Get Your Setup Sorted

Too often, surface damage comes from using the wrong tool at the wrong stage. Steel hammers solve one problem but create another when finish quality matters.

That’s where soft face sledges change the workflow.

Switching to controlled impact tools at the final stage allows cleaner assembly, better alignment & fewer corrections. Whether working on machinery, fabricated steel or installation work, choosing the right hammer keeps everything moving forward.

Before reaching that stage, preparation still matters. The A Professional’s Guide to the Angle Grinder helps ensure surfaces are clean, edges are accurate & materials are ready before controlled striking begins.

Finish the job properly the first time with tools designed for it.

Frequently Asked Questions

What is a soft face sledge hammer used for?

Used for controlled striking where force is needed without damaging surfaces, especially in assembly, fitting & maintenance.

Are soft face hammers the same as non-marking hammers?

Yes. They use soft materials to prevent dents, scratches & surface damage.

Can hammer faces be replaced?

Yes. Sando soft face sledges feature replaceable faces for extended tool life.

Are they suitable for heavy-duty use?

Yes. Built for repeated use across workshops, fabrication & industrial environments.

When should I use a soft face hammer instead of steel?

Use it when working with finished materials, machinery or precision components that cannot be marked.

Do they reduce rework?

They do. Preventing surface damage eliminates the need for correction or refinishing.

Brands

► Sando | Soft Face Sledge Hammer

Non-Marking Striking Tools for Controlled Assembly Work

Across fabrication workshops, mechanical assembly bays & industrial maintenance environments, Sando soft face sledge hammers are used where force is required without damaging finished surfaces. Also known as non-marking sledge hammers or soft head striking tools, they deliver heavy-duty impact while protecting materials from dents, marks & deformation.

Supplying trades across Australia, Industrial Shed stocks Sando soft face sledge hammers for professionals who need reliable striking tools for precision assembly, fitting & maintenance work. From seating bearings to aligning fabricated steel or installing machinery components, these hammers provide controlled impact without the rework caused by surface damage.

On site & in workshop conditions, these tools are used alongside Hammers for controlled striking, combined with Bolts & Fasteners during assembly, & supported by Hand Tools for general mechanical work. Before final alignment, materials are typically prepared using Metal Cutting & Grinding Tools, secured with Fabrication Tools & Workholding, welded using Welding Machines, then finished on Workbenches using soft face impact tools.

When the job calls for force without damage, this range is built to handle it.

What’s in This Collection

► Sando soft face sledge hammers
‣ Designed for heavy striking where impact force is required without damaging finished surfaces

► Replaceable soft hammer faces
‣ Extends tool life by allowing worn striking faces to be replaced instead of the full tool

► Dual-face non-marking heads
‣ Delivers consistent, balanced impact while protecting materials from dents & deformation

► Heavy-duty soft impact hammers
‣ Built for repeated use across fabrication, mechanical & industrial environments

► Controlled force striking tools
‣ Ideal for seating components, aligning assemblies & fitting parts without surface damage

► Assembly & fitting hammers
‣ Used during final stages of mechanical & fabrication workflows

► Non-sparking & non-damaging strike surfaces
‣ Suitable for sensitive components, finished materials & precision work

Within workshop setups, these hammers are typically paired with steel striking tools, allowing trades to switch between raw force & controlled impact depending on the stage of work.

Trade Applications for Sando Soft Face Sledge Hammers

► Bearing seating & mechanical assembly
 ‣ Applies controlled force to seat bearings, bushings & components without damaging tolerances

► Fabrication alignment after welding
 ‣ Adjusts steel components after cutting, grinding & welding without marking finished surfaces

► Machinery maintenance & servicing
 ‣ Repositions components without damaging housings or equipment

► Precision fitting & installation
 ‣ Ensures clean assembly without dents, scratches or rework

► Construction finishing work
 ‣ Handles final adjustments where surface finish must remain intact

► Industrial equipment setup
 ‣ Positions heavy components accurately without surface damage

In environments where finish quality matters, these hammers become essential.