► Work Clothing & Footwear

Work clothing and footwear for trade, site and workshop use Industrial Shed’s Work Clothing & Footwear collection covers practical garments, safety footwear and accessories for construction, fabrication, warehousing, maintenance, outdoor work and industrial sites. Shop work pants and shorts, hi-vis shirts and jackets, welding apparel, wet-weather layers, overalls, base layers,...

Work clothing and footwear for trade, site and workshop use

Industrial Shed’s Work Clothing & Footwear collection covers practical garments, safety footwear and accessories for construction, fabrication, warehousing, maintenance, outdoor work and industrial sites. Shop work pants and shorts, hi-vis shirts and jackets, welding apparel, wet-weather layers, overalls, base layers, socks, insoles and task-specific protective clothing.

Choose workwear for the hazard, climate, movement and site rules—not appearance alone. Confirm the exact garment classification, fabric, protective rating, size, fit and care instructions. A bright colour does not automatically make a garment compliant hi-vis workwear, and a safety toe does not by itself establish slip, penetration, electrical or water resistance.

Safety boots and work footwear

Browse Safety Boots & Shoes by toe protection, sole construction, slip performance, penetration resistance, water resistance, ankle support and closure. Composite and steel toe caps offer different characteristics; neither is automatically the best choice for every workplace. Use the brand’s current size chart and account for width, socks and the fit required through a full shift.

Hi-vis and everyday workwear

Hi-Vis Shirts & Jackets must be chosen for day or night use, garment configuration, reflective material and workplace requirements. Work pants and shorts should be compared by fabric weight, stretch, reinforcement, pocket layout, knee-pad compatibility and fit. Loose clothing can create an entanglement risk around rotating equipment.

Welding and protective clothing

Elliotts and other specialist ranges include welding jackets, aprons, gloves, sleeves, spats and related protective garments. Flame-resistant, arc-rated, heat-resistant and welding apparel are not interchangeable terms. Select against the identified hazard and verify the exact product’s rating, coverage, closure and care requirements.

Brands represented in the range

Current workwear and footwear products include Elliotts, NXP.WRK, Worksense, Mack, Unit, Maxisafe, Ergodyne and selected Weldtronic, Milwaukee, Knipex, Klein Tools and other authorised ranges where the product is genuinely clothing, footwear or a wearable work accessory. Brand and model availability changes, so use the filters and individual product specifications for current choices.

Care, replacement and warranty

Follow each care label. Inspect soles, toe areas, seams, zips, reflective tape and protective components before use. Contamination, incorrect laundering, alterations and wear can reduce protective performance. Warranty periods and exclusions vary by supplier and SKU; Industrial Shed uses the current supplier warranty rather than duplicating a generic duration across the collection.

Local service and Australia-wide delivery

Industrial Shed is Australian and family owned and operated, established in 2012. Customers can collect from the Somerville VIC 3912 warehouse and trade counter Monday to Friday, 7:30am–4:00pm. Australia-wide delivery, trade accounts, crew quantities and project quotations are available, with normal dispatch in 36–48 hours where stock allows.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Showing 0 of 1334 products

No products found
Use fewer filters or clear all

Workwear, hi-vis clothing, protective garments, safety footwear and trade accessories for Australian conditions.
Compare garment or footwear function, fit, material, protection rating, climate and care instructions for the exact SKU.

Choose workwear as a complete system

Consider the base layer, mid layer, outer garment, visibility requirement and footwear together. Layers must manage heat and moisture without obscuring required reflective material or restricting movement. Wet-weather shells need suitable seam and closure construction as well as a useful balance between water resistance and breathability.

For team orders, confirm the brand-specific size chart and trial critical sizes where possible. Record the approved model, colour and size allocation so replacements remain consistent. Women’s workwear and footwear should be chosen from purpose-designed fits where available rather than relying only on reduced unisex sizing.

Keep protective claims tied to the exact garment or boot

Hi-vis, flame resistance, arc rating, toe protection, slip performance and waterproofing are separate characteristics. The presence of one claim does not establish the others. Check the SKU-level label and supplier documentation, especially where a workplace specifies a standard or class.

Industrial Shed can help compare current products and arrange quantities for crews, but the employer and wearer remain responsible for confirming suitability against the site risk assessment and work procedure.

Frequently Asked Questions

How do I choose the correct size when workwear brands fit differently?

Use the current size chart for the exact brand and garment, measure over normal work layers and check the cut and stretch. For team orders, confirm critical sizes before a bulk order where possible.

Is all fluorescent clothing compliant hi-vis workwear?

No. Visibility performance depends on the exact garment design, background material, reflective tape and classification. Check the SKU-level standard and ensure wear, dirt or outer layers do not compromise it.

Are composite toe boots safer than steel toe boots?

Neither is universally safer. Compare the tested toe protection plus weight, temperature behaviour, electrical properties, fit and workplace requirements for the exact boot.

Can welding clothing also be treated as flame-resistant or arc-rated?

Not automatically. Welding, flame-resistant and arc-rated garments address different hazards. Use the product’s verified rating and the site risk assessment.

Can Industrial Shed supply workwear for a whole crew?

Yes. Trade accounts, crew quantities and project quotations are available. Provide garment models, colours, sizes, quantities, delivery location and required date.

Brands

Bahco

Bahco
BBI

BBI
Elliotts

Elliotts
Ergodyne

Ergodyne
Frontier

Frontier
Klein Tools

Klein Tools
Knipex

Knipex
Mack

Mack
Macsim

Macsim
Makita

Makita
Makita Accessories

Makita Accessories
Maxisafe

Maxisafe
Milwaukee

Milwaukee
NXP.WRK

NXP.WRK
OX Tools

OX Tools
Precision Specialty Tools

Precision Specialty Tools
SP Air

SP Air
Sterling

Sterling
Unit

Unit
Weldtronic

Weldtronic
Worksense

Worksense

► Work Clothing & Footwear

Work clothing and footwear for trade, site and workshop use

Industrial Shed’s Work Clothing & Footwear collection covers practical garments, safety footwear and accessories for construction, fabrication, warehousing, maintenance, outdoor work and industrial sites. Shop work pants and shorts, hi-vis shirts and jackets, welding apparel, wet-weather layers, overalls, base layers, socks, insoles and task-specific protective clothing.

Choose workwear for the hazard, climate, movement and site rules—not appearance alone. Confirm the exact garment classification, fabric, protective rating, size, fit and care instructions. A bright colour does not automatically make a garment compliant hi-vis workwear, and a safety toe does not by itself establish slip, penetration, electrical or water resistance.

Safety boots and work footwear

Browse Safety Boots & Shoes by toe protection, sole construction, slip performance, penetration resistance, water resistance, ankle support and closure. Composite and steel toe caps offer different characteristics; neither is automatically the best choice for every workplace. Use the brand’s current size chart and account for width, socks and the fit required through a full shift.

Hi-vis and everyday workwear

Hi-Vis Shirts & Jackets must be chosen for day or night use, garment configuration, reflective material and workplace requirements. Work pants and shorts should be compared by fabric weight, stretch, reinforcement, pocket layout, knee-pad compatibility and fit. Loose clothing can create an entanglement risk around rotating equipment.

Welding and protective clothing

Elliotts and other specialist ranges include welding jackets, aprons, gloves, sleeves, spats and related protective garments. Flame-resistant, arc-rated, heat-resistant and welding apparel are not interchangeable terms. Select against the identified hazard and verify the exact product’s rating, coverage, closure and care requirements.

Brands represented in the range

Current workwear and footwear products include Elliotts, NXP.WRK, Worksense, Mack, Unit, Maxisafe, Ergodyne and selected Weldtronic, Milwaukee, Knipex, Klein Tools and other authorised ranges where the product is genuinely clothing, footwear or a wearable work accessory. Brand and model availability changes, so use the filters and individual product specifications for current choices.

Care, replacement and warranty

Follow each care label. Inspect soles, toe areas, seams, zips, reflective tape and protective components before use. Contamination, incorrect laundering, alterations and wear can reduce protective performance. Warranty periods and exclusions vary by supplier and SKU; Industrial Shed uses the current supplier warranty rather than duplicating a generic duration across the collection.

Local service and Australia-wide delivery

Industrial Shed is Australian and family owned and operated, established in 2012. Customers can collect from the Somerville VIC 3912 warehouse and trade counter Monday to Friday, 7:30am–4:00pm. Australia-wide delivery, trade accounts, crew quantities and project quotations are available, with normal dispatch in 36–48 hours where stock allows.