► Saber | Ball Burrs

Smooth Shaping Power for Steel Edges, Alloy Slots & Precision Deburr Work Ball burrs carry a huge load across fabrication bays, machine shops, auto repair floors & fit-out crews because these cutters shape steel edges, smooth weld landings, open tight channels or round corners where flat wheels can’t reach. Most...

Smooth Shaping Power for Steel Edges, Alloy Slots & Precision Deburr Work

Ball burrs carry a huge load across fabrication bays, machine shops, auto repair floors & fit-out crews because these cutters shape steel edges, smooth weld landings, open tight channels or round corners where flat wheels can’t reach. Most operators begin by marking the work zone with Hand Tools so the burr meets the exact point that needs shaping. Once the layout looks right, techs steady the job piece across Tool Storage benches to stop vibration as the burr starts cutting. Steel dust lifts quickly when shaping metal, so crews gear up with Work Safety Protections before spinning a burr into the first pass.

Ball burrs shine when the job demands controlled material removal. Many teams keep Cutting & Grinding Tools nearby to blend the finish after the burr rounds the pocket or softens the edge. Complex assemblies can hide the shaping area behind brackets or hardware, so techs reach for Pliers Sets to shift small parts or clear tight corners. When bolt heads or fixture plates block the grinding path, workers use Spanner & Wrench Sets to reposition hardware before the burr meets the metal.

A reliable burr decides whether the profile finishes smooth or fights you every millimetre.

What’s in This Collection:

► Saber HSS Ball Burrs – Fine-Shaping Line
‣ HSS burrs built for steel trim, alloy contours, small repair zones & detailed cut shaping.

► Saber Tungsten-Carbide Ball Burrs – Heavy-Cut Series
‣ Hard-wearing carbide burrs designed for stainless, cast steel, reinforced alloy & abrasive composites.

► Saber Single-Cut Ball Burrs – Smooth-Control Range
‣ Single-cut profiles suited for clean removal when shaping channels, pockets or curved openings.

► Saber Double-Cut Ball Burrs – Chip-Break Series
‣ Double-cut teeth that break chips quickly across steel, cast iron or tough machine sections.

► Saber Extended-Reach Ball Burrs – Deep-Access Line
‣ Long-shank burrs built for tight cavities, recessed shaping, hidden edges & deep slots.

► Saber Ball Burr Packs – Multi-Burr Workshop Sets
‣ Mixed sets for fabricators, boilermakers, auto techs, metal sculptors & industrial service crews.

 

Sidebar

Product Type

Brands

Price

$
to
$
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Saber - 1/2" SD-5NF Ball Burr - Non Ferrous | 8020-SD5NFSaber - 1/2" SD-5NF Ball Burr - Non Ferrous | 8020-SD5NF
    Saber - 1/2" SD-5NF Ball Burr - Non Ferrous | 8020-SD5NF
    Saber 1/2" SD-5NF Ball Burr - Non Ferrous | 8020-SD5NF The Saber 1/2" SD-5NF Ball Burr is designed for aggressive material removal and finishing on aluminium, brass, copper, plastics, and other non-ferrous materials. Featuring a specialised non-ferrous cut pattern, this burr helps reduce chip...
    $73.34
    $114.60
    $73.34
  • Saber - 3/8" SD-3 Ball Burr | 8020-SD3Saber - 3/8" SD-3 Ball Burr | 8020-SD3
    Saber - 3/8" SD-3 Ball Burr | 8020-SD3
    Saber 3/8" SD-3 Ball Burr | 8020-SD3 The Saber 3/8" SD-3 Ball Burr is engineered for aggressive shaping, contouring, deburring, and material removal across steel, stainless steel, cast iron, titanium alloy, and fabrication materials. Built from tungsten carbide with an express cut flute design,...
    $34.18
    $53.39
    $34.18
  • Saber - 1/2" SD-5 Ball Burr | 8020-SD5Saber - 1/2" SD-5 Ball Burr | 8020-SD5
    Saber - 1/2" SD-5 Ball Burr | 8020-SD5
    Saber 1/2" SD-5 Ball Burr | 8020-SD5 The Saber 1/2" SD-5 Ball Burr is built for heavy-duty contouring, shaping, deburring, and material removal across steel, stainless steel, cast iron, titanium alloy, and fabrication materials. Manufactured from tungsten carbide with an express cut design, this...
    $46.24
    $72.25
    $46.24
  • Saber - 1/4" SD-1 Ball Burr | 8020-SD1Saber - 1/4" SD-1 Ball Burr | 8020-SD1
    Saber - 1/4" SD-1 Ball Burr | 8020-SD1
    Saber 1/4" SD-1 Ball Burr | 8020-SD1 The Saber 1/4" SD-1 Ball Burr is designed for precision contouring, shaping, deburring, and material removal across steel, stainless steel, cast iron, titanium alloy, and fabrication materials. Manufactured from tungsten carbide with an express cut flute design,...
    $29.90
    $46.72
    $29.90

Reliable Shaping Reach for Fabricators, Boilermakers, Auto Techs & Industrial Fitters

Metal shaping rarely gives perfect access. Fabricators rely on ball burrs when a weld bead needs softening, a hole edge needs breaking or a tight curve must be refined before the final fit. Boilermakers use these tools on plate edges, bevel prep areas or cleat corners that need smoothing before assembly. Auto techs clean casting flaws, shape ports, open housings or remove high spots inside engine components. Industrial fitters use ball burrs daily to clear interference points, relieve sharp edges or blend transitions across frames, mounts or machine parts.

Shaping work often pushes operators into awkward stances, so crews stay steady with Safety Boots & Shoes before leaning into heavy material removal. Workflows stay predictable with Same day dispatch, keeping burrs available when cutting edges dull during long service cycles. Sharpness holds longer when teams follow Tool & Equipment Care, which stops chip buildup on flutes so each burr keeps cutting clean.

Material type controls the shaping rhythm. Stainless needs consistent pressure to avoid heat rise. Alloy cuts fast, so feed control matters to avoid over-removal. Cast steel flakes under aggressive feed, so smoother strokes protect edges. Composite-filled material throws fine dust, so burr selection shapes the finish quality. Deep shapes inside housings demand long shanks that resist flex. Softening sharp edges reduces injury risk during final fit or maintenance work.

Ball burrs finish what heavier tools can’t reach. Their spherical heads cut clean arcs, open channels & refine interior contours with precision. Whether trimming, smoothing, deburring, relieving or contouring, Saber ball burrs give professional crews the reliable control needed for clean metal shaping.

Saber ball burrs keep shaping work smooth, steady & predictable across tough industrial tasks.

► Carbide, HSS, single-cut, double-cut & extended-reach options
► Clean shaping for steel, stainless, alloy, cast iron & composite-filled material
► Ideal for fabrication shops, auto repair, plant maintenance & metal art work
► Built for controlled feed with stable flute geometry

If your next job needs clean shaping across steel edges, alloy pockets or cast sections, load up with Saber ball burrs. Sharp flutes keep contours smooth so final fit holds true.

Frequently Asked Questions

Yes. Quality carbide profiles grip stainless cleanly so the burr rounds corners without sudden bite.

Yes. The spherical shape enters tight pockets smoothly so material clears at a steady pace.

Yes. Long shanks hold firm under controlled feed pressure so deep-access work stays predictable.

Brands

Saber

Saber