► Richmond Rolling Solutions | Anti Static Rubber Wheels

Static-Control Wheels for Mobile Equipment Static-sensitive equipment changes what “just a wheel” needs to do. Richmond Rolling Solutions Anti Static Rubber Wheels are designed for mobile equipment where electrical charge dissipation needs consideration alongside load, rolling performance & mechanical compatibility. For workshops, production areas & specialist facilities moving equipment throughout...

Static-Control Wheels for Mobile Equipment

Static-sensitive equipment changes what “just a wheel” needs to do. Richmond Rolling Solutions Anti Static Rubber Wheels are designed for mobile equipment where electrical charge dissipation needs consideration alongside load, rolling performance & mechanical compatibility. For workshops, production areas & specialist facilities moving equipment throughout the day, Material Handling Equipment provides a closely related starting point for the wider handling setup.

Replacing a worn wheel successfully takes more than finding another black rubber option of roughly the same diameter. Anti-static properties, wheel size, axle or bore arrangement, bearings, hub dimensions plus the existing castor all need to line up. Where the wheel belongs to workshop equipment or a service trolley, Workshop Equipment can support the broader workplace setup.

What matters most is matching the component to both the equipment & the environment. A wheel that physically fits but doesn't suit the required load, mounting arrangement or static-control requirement isn't the right replacement.

What Are Richmond Rolling Solutions | Anti Static Rubber Wheels?

Richmond Rolling Solutions Anti Static Rubber Wheels are specialised rubber wheels intended to help dissipate electrical charge in appropriate mobile-equipment applications. They provide a rubber rolling surface while addressing applications where ordinary wheel material may not satisfy the equipment's static-control requirement.

Richmond identifies anti-static wheel configurations including:

► 100mm anti-static wheel options
► 125mm anti-static wheel options
► Anti-static wheels incorporated into compatible Richmond castor assemblies
► Replacement wheel configurations for suitable mobile equipment
► Anti-static shopping trolley wheel applications

Richmond wheel references include anti-static configurations across different applications rather than one universal wheel. That makes the identifying code, diameter, wheel width, bore or bearing arrangement plus intended equipment important when replacing an existing component.

Why Choose Richmond Rolling Solutions | Anti Static Rubber Wheels?

A trolley can roll perfectly well while still having the wrong wheel characteristics for its operating environment. Anti-static rubber wheels provide an option for suitable equipment where charge dissipation forms part of the workplace requirement.

Reasons to consider them include:

► Designed for appropriate static-sensitive applications
► Rubber rolling surface
► Selected Richmond replacement-wheel configurations
► Multiple wheel-size options
► Compatibility with appropriate Richmond castor assemblies
► Applications across trolleys, carts plus specialist mobile equipment
► Useful where an ordinary rubber wheel isn't appropriate for the required static-control arrangement

Mechanical fit still comes first alongside the electrical requirement. Anti-static performance doesn't compensate for an incorrect axle, incompatible hub, insufficient capacity or a wheel that cannot fit the existing castor frame.

Common Applications

An electronics cart moving components between workstations faces different conditions from a general-purpose stock trolley. Where static-sensitive items or processes are involved, wheel selection can become part of the equipment specification rather than simply a maintenance choice.

► Electronics assembly areas – mobile carts carrying suitable static-sensitive components or equipment.
► Technical workshops – service carts, instrument trolleys plus mobile equipment used around controlled work.
► Manufacturing facilities – suitable mobile workstations moving between production stages.
► Laboratories – compatible carts or equipment operating within defined workplace requirements.
► Healthcare facilities – mobile equipment where anti-static wheel performance is specified for the application.
► Specialist warehouses – handling carts operating around products or processes requiring static consideration.
► Shopping trolleys – suitable Richmond anti-static wheel configurations for compatible trolley applications.

► Maintenance departments – replacement of worn anti-static wheels without unnecessarily replacing otherwise serviceable equipment.

Workshop mobility often extends beyond one cart. Benches, service equipment, storage systems plus other movable assets can all contribute to how efficiently technicians work, making Tool Storage & Workbenches a useful companion category when setting up mobile work areas.

Product Selection Guide

Identify What Is Already Fitted?

Got the old wheel in your hand? Start there before opening the parts catalogue. Product markings plus a few careful measurements can prevent a near-match becoming an unusable replacement.

Record:

► Richmond product code where visible
► Outside diameter
► Wheel width
► Hub width
► Bore or axle diameter
► Bearing arrangement
► Existing castor type
► Mounting hardware

Heavy wear can make measurements deceptive. If the tread has flattened or deteriorated significantly, compare the remaining dimensions with the castor assembly plus any identifiable product reference rather than relying on worn diameter alone.

Compare Anti-Static & Ordinary Rubber by Purpose

Similar appearance doesn't mean identical performance.

Decision point

Anti-static rubber wheel

Ordinary rubber wheel

Main reason for selection

Static-sensitive application plus rolling requirement

General rolling requirement

Static consideration

Specifically selected for anti-static characteristics

Shouldn't be assumed to provide anti-static performance

Mechanical checks

Diameter, width, bore, bearing, hub plus load

Diameter, width, bore, bearing, hub plus load

Best fit

Equipment requiring compatible anti-static wheels

General mobile equipment where anti-static performance isn't specified

The workplace requirement should settle the material question before appearance does. If the original equipment specifies an anti-static wheel, don't substitute an ordinary rubber wheel simply because the dimensions look close.

Match Capacity to the Loaded Equipment

How heavy is the trolley when somebody loads it for the busiest job of the week? Empty equipment weight tells only part of the story.

Consider:

► Trolley or equipment tare weight
► Maximum carried load
► Number of wheels carrying the load
► Uneven load distribution
► Dynamic forces during movement
► Floor joints or thresholds
► Appropriate capacity margin

Load changes can creep into equipment use over time. A cart originally intended for light parts may gradually become the workshop's favourite place for heavy tools, components or machinery, so reassess its real working load before replacing wheels.

Check the Bearing, Bore & Axle

The centre of the wheel can eliminate an otherwise perfect-looking replacement. Bore size, bearings, axle hardware plus hub dimensions determine whether the wheel can actually be installed correctly.

Where broader rotating-equipment maintenance is also underway, Bearings can support related replacement requirements.

Compare:

► Bearing type
► Bore diameter
► Axle diameter
► Hub width
► Spacers
► Washers
► Fasteners

Don't force incompatible hardware together to get a trolley moving again. Incorrect axle or bearing fit can introduce unwanted play, binding plus premature component wear.

Inspect the Complete Castor

A worn tread isn't always the reason a trolley suddenly feels terrible to steer. Before replacing the wheel alone, inspect the swivel assembly, frame, axle plus mounting hardware.

Symptom

Areas worth checking

Wheel wobbles

Bearing, axle, hub plus fasteners

Trolley pulls sideways

Wheel wear, swivel movement plus alignment

Rhythmic bump while rolling

Flat spot, tread damage or embedded debris

Wheel turns but trolley steers poorly

Swivel castor, frame plus mounting

Excessive noise

Bearing, tread, axle plus floor condition

Uneven trolley height

Mixed diameters or uneven wheel wear

Replacing the correct failed component is usually better than guessing from the symptom. If the wheel rotates smoothly but the castor won't swivel correctly, the problem may sit above the wheel.

Consider the Floor Route

One damaged expansion joint can punish a wheel hundreds of times during a normal shift. Look at where the equipment actually travels rather than assessing the replacement on a clean workbench.

Check for:

► Concrete joints
► Thresholds
► Floor damage
► Metal swarf
► Fasteners or offcuts
► Surface contamination
► Tight turning areas
► Long travel distances

Repeated impact can tell you something about the route as well as the wheel. Where possible, correct persistent floor hazards rather than expecting replacement wheels to absorb the same abuse indefinitely.

Confirm the Static Requirement

“Anti static” describes an important characteristic, but it doesn't replace the workplace's complete static-control requirements. Flooring, equipment, grounding arrangements, humidity, processes plus operating procedures can all influence the overall environment.

Before changing wheel type:

► Check the original equipment requirement
► Identify why anti-static performance is required
► Confirm workplace procedures
► Review the floor environment
► Verify mechanical compatibility
► Confirm the selected wheel suits the intended equipment

Critical applications deserve confirmation rather than assumption. Where static performance forms part of a controlled workplace system, assess the complete equipment arrangement against the requirements applying to that facility.

Expert Tips

► Photograph every visible code before removing the old wheel. Identification is easier while the original component is still assembled.
► Measure the hub as well as the tread. Outside diameter alone rarely tells the whole compatibility story.
► Spin the wheel before blaming it. Roughness, noise or play can help distinguish bearing trouble from tread wear.
► Swivel the castor separately. Steering resistance can originate above a perfectly serviceable wheel.
► Compare wheels across the same trolley. Uneven wear can reveal loading, alignment or floor problems.
► Check the real working load. What the trolley carries today may be very different from what it was originally bought to carry.
► Remove swarf from travel routes. Sharp workshop debris can damage rolling surfaces plus compromise smooth movement.
► Avoid mixing wheel diameters. Even small differences can change trolley height, load sharing plus handling.
► Look for flat spots after long storage. Equipment parked under load for extended periods deserves inspection before returning to frequent use.
► Recheck axle hardware after replacement. Correct fit plus secure fastening are just as important as the new tread.
► Keep static requirements documented. Future maintenance teams should know why the specialised wheel was fitted.
► Investigate repeat failures. Rapidly wearing replacements can indicate overloading, floor damage, misalignment or an unsuitable application.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Richmond Rolling Solutions - AS5020-31 125mm Grey Antistatic Wheel Suit 5/16 Axle | 022AS5020-31
    Richmond Rolling Solutions - AS5020-31 125mm Grey Antistatic Wheel Suit 5/16 Axle | 022AS5020-31
    Richmond Rolling Solutions AS5020-31 125mm Grey Antistatic Wheel Suit 5/16 Axle | 022AS5020-31This Richmond anti-static wheel safely dissipates static charge with a surface resistivity under 10,000Ω, conforming to AS 2050-1978. Its grey rubber tyre on a nylon centre suits electronics, cleanroom and other static-sensitive...
    $17.68
    $17.68
  • Richmond Rolling Solutions - AS5004-31 Anti Static Whl Grey Rubber | 022AS5004-31
    Richmond Rolling Solutions - AS5004-31 Anti Static Whl Grey Rubber | 022AS5004-31
    Richmond Rolling Solutions AS5004-31 Anti Static Whl Grey Rubber | 022AS5004-31This Richmond anti-static wheel safely dissipates static charge with a surface resistivity under 10,000Ω, conforming to AS 2050-1978. Its grey rubber tyre on a nylon centre suits electronics, cleanroom and other static-sensitive environments.► Key...
    $30.50
    $30.50
  • Richmond Rolling Solutions - AS4005-31 Anti Static Whl Grey Rubber | 022AS4005-31
    Richmond Rolling Solutions - AS4005-31 Anti Static Whl Grey Rubber | 022AS4005-31
    Richmond Rolling Solutions AS4005-31 Anti Static Whl Grey Rubber | 022AS4005-31This Richmond anti-static wheel safely dissipates static charge with a surface resistivity under 10,000Ω, conforming to AS 2050-1978. Its grey rubber tyre on a nylon centre suits electronics, cleanroom and other static-sensitive environments.► Key...
    $28.75
    $28.75

Why Buy From Industrial Shed?

Replacement-wheel jobs become much easier when the old component can be identified before the trolley is stripped down. Industrial Shed supports workshops, maintenance teams, warehouses plus industrial facilities with Richmond Rolling Solutions components alongside Mobile Tool Trolleys for related workshop mobility requirements.

A wheel failure might be small, but equipment downtime rarely feels small when the trolley is used every shift. One Year On The Tools Lessons Learned looks at lessons that emerge through real equipment use, while The Apprentice's First Tool Kit: What You Actually Need explores practical equipment choices without loading a kit with unnecessary gear.

Correct replacement parts usually cost less trouble than improvised near-matches. A tool is not just a tool. It’s a promise. looks at the importance of dependable equipment once work begins.

Can't identify the wheel from the remaining markings? Contact Us with the Richmond code, measurements or equipment details, while Same day dispatch can help keep suitable replacement orders moving once the correct component is identified.

Put the trolley back into service with more than a visual match — confirm the Richmond wheel's anti-static requirement, dimensions, axle, load & castor fit before the next shift starts rolling.

Frequently Asked Questions

It is a specialised rubber wheel intended for suitable mobile equipment where anti-static characteristics are required alongside normal rolling performance.

A standard rubber wheel shouldn't automatically be assumed to provide the same anti-static characteristics. If the equipment or workplace requires an anti-static wheel, replace it with a suitable specified option.

Richmond identifies anti-static wheel configurations including 100mm plus 125mm options across appropriate applications. The exact wheel should be selected from its dimensions, code plus equipment compatibility.

Look for product markings or codes, then record the wheel diameter, width, hub dimensions, bore or axle size plus bearing arrangement.

They can suit compatible mobile equipment where the wheel dimensions, capacity, castor arrangement plus static requirements all match the application.

No. They can be relevant wherever suitable mobile equipment is specified to use anti-static wheels, including selected technical, manufacturing, healthcare, laboratory plus specialist handling environments.

Brands

Richmond Rolling Solutions

Richmond Rolling Solutions

Solutions Built for Tradies: How Industrial Shed Powers Your Success

At Industrial Shed, we understand that reliable tools are the backbone of any successful project. That’s why we stock durable, high-performance equipment designed to handle tough jobs without breakdowns or delays. Trade professionals across the Mornington Peninsula and Melbourne trust our range for its dependability and long-lasting quality.

As an independent tool retailer, we take pride in offering only the most trusted brands to ensure you get the job done right the first time. Whether you need hand tools, power tools, or workshop essentials, our carefully curated selection guarantees reliability, so you can focus on your work with confidence.

Struggling to locate specialised tools for your trade? Industrial Shed has you covered. Our extensive range ensures trade professionals across the Mornington Peninsula and Melbourne have access to niche products without the hassle of searching multiple suppliers. From unique fasteners to specialty power tools, we make it simple to find exactly what you need.

As a local, independent tool retailer, we understand the challenges tradies face in sourcing specific equipment. Our team is here to provide expert advice and personalised support, ensuring you have the right tools for the job—every time.

At Industrial Shed, we know the trade industry inside out. As an independent tool shop based on the Mornington Peninsula, we are deeply familiar with the needs of local tradies and construction professionals. Our curated selection of tools is designed to meet the demands of both large-scale projects and everyday trade work.

Our team provides tailored advice and practical solutions to ensure you’re equipped with the right tools and equipment for every job. With years of experience serving Melbourne and Mornington Peninsula professionals, we are your trusted partner for all things trade.

At Industrial Shed, we simplify your workday by offering everything you need under one roof. From hand tools and power tools to fasteners, workwear, and safety gear, our one-stop shop helps trade professionals save valuable time. No more running between multiple suppliers—we have it all.

Serving the Mornington Peninsula and Melbourne regions, we take pride in making your tool shopping experience efficient and straightforward. As an independent retailer, we focus on delivering high-quality products with the service and support you can rely on.

Your safety is our priority at Industrial Shed. We stock a full range of durable workwear, safety equipment, and PPE to keep you and your team protected on-site. From hi-vis clothing to helmets and gloves, our collection is designed with the toughest conditions in mind.

Trade professionals on the Mornington Peninsula and in Melbourne trust us for reliable safety solutions. With expert advice and a commitment to quality, we make sure you have the gear you need to stay safe while getting the job done.

Demanding projects require tools you can trust. At Industrial Shed, our heavy-duty tools and equipment are built to handle the toughest challenges on any worksite. Whether it’s power tools, concrete tools, or lifting gear, we’ve got the equipment you need to perform.

Serving trade professionals across the Mornington Peninsula and Melbourne, we specialise in high-performance tools that stand up to wear and tear. As an independent tool retailer, we provide personalised service to ensure you have the strength and reliability to succeed.

At Industrial Shed, we believe that balancing cost and performance shouldn’t mean compromising on quality. Our range of high-performance tools is competitively priced to ensure Melbourne and Mornington Peninsula tradies stay within budget while using the best gear.

From hand tools to power tools, we stock trusted brands that deliver value and durability. As an independent retailer, we’re committed to providing trade professionals with reliable tools that won’t break the bank—or let you down.

At Industrial Shed, we understand the importance of reliable power on the job. Our range of generators and portable power solutions is designed to keep your tools and equipment running smoothly, no matter where you’re working.

From small repairs to large-scale projects across the Mornington Peninsula and Melbourne, our power solutions are trusted by trade professionals. As your local tool shop, we offer expert advice to ensure you’re equipped with the right tools for uninterrupted productivity.

Avoid costly project delays with Industrial Shed’s consistently stocked inventory. We ensure trade professionals across the Mornington Peninsula and Melbourne have quick access to the tools, fasteners, and supplies they need to get the job done on time.

As an independent retailer, we pride ourselves on being a reliable partner for tradies, offering high-quality products and personalised service. When you shop with us, you’ll never have to worry about supply shortages holding you back.

At Industrial Shed, we’re more than just a tool retailer—we’re your partner in productivity. Serving Melbourne and the Mornington Peninsula, we provide trade professionals with the trusted tools, advice, and support they need to succeed on every project.

Our independent approach ensures we prioritise your needs, from reliable product recommendations to tailored solutions. With our high-quality gear and expert service, you can count on us to help you work smarter and achieve more.