Find the Right Power Pack for Your Crimping Tool
A battery-powered crimping tool can remain mechanically serviceable long after its original battery begins to lose capacity. Replacing the battery may restore equipment availability without purchasing another complete tool—but only when the replacement matches the tool's approved battery system.
Rennsteig Replacement Batteries at Industrial Shed include two 12V options: 637000000AF (1.5Ah) & 637000010AF (3.0Ah). These correspond to manufacturer references associated with the older Power E-Crimp PEW 12 system.
If you're reviewing related Rennsteig equipment, explore Rennsteig Repair Kits for a separate manual cable-repair application & Rennsteig Assortment Boxes for wire-end ferrule tooling kits.
Neither category is a substitute for a compatible replacement battery. The battery must match the exact powered tool & its charger.
Which Rennsteig Replacement Battery Do You Need?
The collection includes two nominal capacities:
|
Industrial Shed SKU
|
Corresponding manufacturer reference
|
Nominal rating
|
|
637000000AF
|
6370 0000 0
|
12V / 1.5Ah
|
|
637000010AF
|
6370 0001 0
|
12V / 3.0Ah
|
Before ordering, check the full battery reference printed on your existing pack.
The AF suffix used in the Industrial Shed SKU should be confirmed against the manufacturer's original reference.
12V 1.5Ah Battery
The 1.5Ah option may suit buyers replacing an existing approved battery of the same specification.
Confirm the complete tool model, battery reference & charger before purchasing.
12V 3.0Ah Battery
The 3.0Ah option offers greater nominal charge capacity at the same stated voltage.
It should only be selected where the manufacturer approves it for the particular tool & charger.
Why Battery Compatibility Matters More Than Capacity?
A battery's voltage & amp-hour rating are important, but they do not establish whether it will work with a specific powered crimping tool.
Compatibility can depend on:
► Battery housing & mechanical connection
► Electrical contact arrangement
► Tool electronics & battery management
► Charger design
► Manufacturer model generation
► Approved replacement part numbers
Rennsteig also documents newer 2.0Ah & 4.0Ah battery options for an E-PEW 12 configuration.
Do not assume these newer references can replace the older 1.5Ah or 3.0Ah packs.
Comparing 1.5Ah & 3.0Ah Batteries
At the same nominal voltage, a 3.0Ah battery has twice the stated charge capacity of a 1.5Ah battery.
That does not guarantee twice the number of completed crimps.
Actual runtime depends on the tool, application, battery condition & operating environment.
Choose Based on the Approved Part Number
A higher-capacity battery is not automatically a better choice if it is incompatible with your equipment.
Consider Your Charging Routine
For technicians performing scheduled work, a verified spare may help manage charging interruptions.
Avoid Unsupported Performance Claims
A replacement battery does not automatically increase the crimping force of the tool.
The tool's mechanical & electronic design determines its rated performance.
Where Replacement Batteries Are Useful?
Electrical Maintenance Workshops
Compatible spare batteries can support routine electrical termination work.
Mobile Service Technicians
A charged spare may help when technicians are working away from charging facilities.
Industrial Harness Assembly
Workshops using compatible battery-powered crimping tools may benefit from identifying spare packs by exact part number.
Equipment Maintenance Departments
Replacing a worn battery can be part of a planned tool-maintenance process.
Shared Workshop Tool Fleets
Where several powered tools are in use, clear battery identification reduces the risk of mixing incompatible equipment.
For storing spare batteries & related equipment, browse Tool Storage.
Battery Identification Checklist
Before purchasing, confirm:
► Tool model: Full manufacturer reference from the tool label.
► Battery reference: Exact part number on the existing pack.
► Voltage: Match the manufacturer's approved battery specification.
► Capacity: Choose an approved 1.5Ah or 3.0Ah option.
► Charger: Confirm the replacement is approved for the existing charger.
► Tool generation: Check whether the tool uses an older or newer battery system.
► Retail SKU: Confirm the Industrial Shed AF-suffixed reference corresponds to the intended manufacturer part.
If you cannot establish compatibility, obtain confirmation before ordering.
Battery Care & Safe Handling
Use the Correct Charger
Only charge the battery with equipment approved for its exact model.
Keep Battery Contacts Protected
Avoid damage, moisture & accidental contact with loose metal objects.
Prevent Excessive Heat Exposure
Do not store batteries in direct sunlight or hot vehicles for prolonged periods.
Inspect Before Charging
Do not charge a swollen, cracked, leaking or unusually hot battery.
Avoid Internal Repairs
Do not open a lithium-ion battery pack or attempt to replace individual cells.
Follow Transport Requirements
Lithium-ion batteries may be subject to special freight requirements. Check the applicable transport rules.
Recycle Worn Batteries
Use an appropriate battery collection or recycling service rather than placing lithium-ion packs in general waste.
If the battery or tool repeatedly fails to charge, Industrial Shed's Power Tool Repairs & Diagnostics information may help you identify the appropriate next step.