► Rennsteig | Master Set In Cases

Specialist Fibre Optic Buffer Tube Opening Kits Accessing optical fibres inside a buffer tube requires controlled cutting. If the tube is opened using an unsuitable tool or excessive blade depth, the fibres beneath can be damaged, turning a planned connection or maintenance task into a more involved repair. Rennsteig Master...

Specialist Fibre Optic Buffer Tube Opening Kits

Accessing optical fibres inside a buffer tube requires controlled cutting. If the tube is opened using an unsuitable tool or excessive blade depth, the fibres beneath can be damaged, turning a planned connection or maintenance task into a more involved repair.

Rennsteig Master Set In Cases at Industrial Shed includes two specialist fibre-optic cable opening kits: the RAUCUT I Master Set In Case & RAUCUT II Master Set In Case.

These are purpose-designed buffer tube opening systems, not general electrical crimping kits, mechanical master tool sets or fibre-optic fusion splicers.

For compatible smaller buffer tube applications, explore Rennsteig Cable Guides for RAUCUT I interchangeable guides. For other specialist cable preparation equipment, see Rennsteig Insulation Stripper & Blades, noting that conventional electrical insulation strippers do not replace fibre-optic buffer tube opening tools.

The key selection decision is the buffer tube diameter & the method required to open it without damaging the fibres.

What Are Rennsteig Master Set In Cases?

The master sets in this collection are cased RAUCUT tools used to open fibre-optic buffer tubes.

Fibre-optic cables may contain optical fibres within protective tubes. During installation, branching or repair work, technicians sometimes need to access those fibres without unnecessarily cutting through the entire tube.

The two systems address different tube sizes & use different guide components.

► RAUCUT I: Designed for opening cut or uncut mini-buffer tubes, using interchangeable tube guides.
► RAUCUT II: Designed for opening larger uncut buffer tubes, using guide rollers & an adjustable cutting arrangement.
► Application-specific accessories: Each set contains components associated with its particular RAUCUT system.
► Protective case: Keeps the tool & included accessories together for transport & workshop storage.
► Serviceable components: Rennsteig identifies replacement cutting components & guides for the corresponding systems.

The sets are not interchangeable simply because both are supplied in cases.

Why Choose Rennsteig Master Set In Cases?

Access Fibres Without Unnecessary Tube Separation

The RAUCUT systems are designed for opening compatible buffer tubes during fibre-optic cable preparation.

This can be useful where the installation procedure requires access to fibres within an existing tube.

Select a Tool for the Tube Diameter

RAUCUT I & RAUCUT II cover different buffer tube diameter ranges.

Choosing the correct system helps avoid attempting a procedure with unsuitable guiding geometry.

Keep Accessories Together

The supplied case provides a dedicated place for the tool & its associated guides, rollers or service accessories.

Support Planned Fibre Maintenance

A correctly configured buffer tube opening tool can be part of a controlled fibre access or branching procedure.

Maintain the System With Specified Components

Rennsteig lists replacement guides, rollers & blades for the relevant RAUCUT systems.

These parts must be matched to the exact tool model.

Common Applications

Fibre-Optic Cable Access

Technicians may need to expose fibres inside a compatible buffer tube during installation or maintenance.

Mid-Span Fibre Access

Where permitted by the cable design & work procedure, an uncut buffer tube may need opening at a selected location.

Telecommunications Network Maintenance

Specialist fibre technicians may use the correct RAUCUT system during approved network rework or cable servicing.

Fibre Distribution & Branching Work

Buffer tube access can be necessary when preparing fibres for a planned branch or connection.

Fibre-Optic Workshop Preparation

Workshops can configure the appropriate RAUCUT tool before carrying out cable preparation on a known tube construction.

For other connector-related workshop tasks, Rennsteig Assembly Tools covers separate electrical contact insertion & removal applications.

Product Selection Guide

Compare RAUCUT I & RAUCUT II

Feature

RAUCUT I

RAUCUT II

Industrial Shed SKU

800710706AF

800730306AF

Manufacturer reference

8007 1070 6

8007 3030 6

Primary application

Mini-buffer tube opening

Larger buffer tube opening

Documented tube diameter range

0.9–4.2 mm

4–14 mm

Guiding system

Interchangeable tube guides

Interchangeable guide rollers

Supplied case

Yes

Yes

Manufacturer-listed weight

940 g

2,900 g

The AF-suffixed retail references should be confirmed against the corresponding manufacturer products before ordering.

RAUCUT I – For Mini-Buffer Tubes

The RAUCUT I is designed to open cut or uncut mini-buffer tubes while reducing the risk of damage to the enclosed optical fibres when used correctly.

The manufacturer lists the following included tube guides:

► 1.8 mm
► 2.0 mm
► 2.4 mm
► 2.8 mm
► 3.0 mm
► 3.5 mm
► 4.2 mm

The manufacturer's case specification also lists a spatula, Allen key & replacement blade.

Additional guide sizes are available separately.

RAUCUT II – For Larger Buffer Tubes

The RAUCUT II is intended for opening larger uncut buffer tubes.

Rennsteig documents an adjustable cutting arrangement with guide rollers for compatible tube diameters.

The manufacturer lists six included guide rollers:

► 5 mm
► 6 mm
► 7 mm
► 8 mm
► 9 mm
► 10 mm

The case specification also identifies a knob, Allen key, screwdriver & spatula.

Other roller sizes are available separately for compatible applications.

Step 1: Identify the Buffer Tube

Measure the actual outside diameter of the tube being opened.

Do not select the tool using the overall cable diameter.

Step 2: Check the Tube Construction

Confirm the cable manufacturer's permitted opening method.

Different tube materials & fibre arrangements may require different procedures.

Step 3: Select the Appropriate RAUCUT System

Use RAUCUT I for compatible mini-buffer tubes within its specified range.

Use RAUCUT II for larger compatible buffer tubes within its documented range.

Step 4: Confirm Included Accessories

Check whether the guide or roller size required for the job is included in the case.

A tool's full operating range does not mean every available guide is supplied.

Step 5: Plan the Fibre Handling Procedure

Opening a buffer tube is only one stage of fibre preparation.

Follow the applicable cleaning, fibre handling, protection & testing requirements.

Expert Tips

Measure the Tube Before Choosing a Guide

Select the guide or roller for the actual buffer tube diameter.

Avoid Excessive Cutting Depth

Follow the manufacturer's adjustment procedure to minimise the risk of fibre damage.

Inspect the Tool Before Use

Check the cutting edge, guide components & adjustment mechanism for damage or contamination.

Keep Guides & Rollers Identified

Store components with their sizes visible to reduce changeover errors.

For additional workshop organisation, explore Tool Storage.

Use Appropriate Fibre Safety Procedures

Handle fibre shards as sharps, use suitable eye protection & follow the workplace's fibre-disposal procedure.

Never look into an optical fibre without confirming that it is safe to do so.

Verify the Opening Method

Do not assume every fibre cable can be opened mid-span.

Check the cable manufacturer's instructions & the approved network work method.

Maintain Cutting Components

Replace damaged or worn parts using the correct manufacturer reference.

For general equipment maintenance guidance, see Tool & Equipment Care.

Why Buy From Industrial Shed?

Industrial Shed supplies specialist tools & workshop equipment to Australian trade customers, industrial maintenance businesses & technical contractors.

The RAUCUT master-set collection offers two distinct fibre-optic buffer tube opening systems, allowing buyers to select the correct tool family for their application.

► Two identifiable Rennsteig RAUCUT case sets
► Dedicated mini-buffer & larger buffer tube options
► Manufacturer-documented guide & roller systems
► Access to related spare components
► Warranty & Parts Support

Open Fibre Buffer Tubes With the Right RAUCUT System

Choose the Rennsteig RAUCUT master set matched to your buffer tube diameter. Compare RAUCUT I & RAUCUT II, check the included accessories & prepare for controlled fibre-optic cable access.

Frequently Asked Questions

How do I determine whether a fibre-optic buffer tube can be opened mid-span?

Check the cable manufacturer's construction details & approved access procedure. RAUCUT tools can open specified uncut buffer tubes, but suitability depends on tube material, diameter, fibre arrangement & the permitted opening method. Never assume every loose-tube cable supports mid-span access.

Why does RAUCUT I use fixed cable guides while RAUCUT II uses guide rollers?

The two systems are designed for different buffer tube sizes & opening mechanisms. RAUCUT I uses interchangeable guides to position mini-buffer tubes from 0.9–4.2 mm. RAUCUT II uses guide rollers for larger tubes from 4–14 mm. Their guiding components are not interchangeable.

What should I check before making the first cut into a buffer tube?

Confirm the actual tube outside diameter, correct guide or roller, blade condition & manufacturer's cutting adjustment. Check that the tube is properly positioned & follow the approved cable-opening procedure. Incorrect blade depth can damage fibres beneath the tube wall.

Can RAUCUT tools open gel-filled fibre-optic buffer tubes?

Do not assume compatibility based on diameter alone. Confirm that the specific tube construction is approved for the chosen RAUCUT tool & opening method. Gel-filled tubes may also require additional fibre cleaning & handling procedures after access.

When should the cutting blade in a RAUCUT tool be replaced?

Inspect the blade if the tool begins tearing the tube, produces inconsistent openings or requires unusual force. A damaged or worn edge may need replacement, but incorrect guide selection or cutting adjustment can cause similar symptoms. Diagnose the setup before changing parts.

Can RAUCUT I & RAUCUT II be used on live fibre-optic networks?

Only under an authorised procedure that addresses optical radiation, network service continuity & fibre handling. A RAUCUT tool does not establish that a fibre is safe to handle. Follow the network operator's isolation, testing & access requirements.

Brands

► Rennsteig | Master Set In Cases

Specialist Fibre Optic Buffer Tube Opening Kits

Accessing optical fibres inside a buffer tube requires controlled cutting. If the tube is opened using an unsuitable tool or excessive blade depth, the fibres beneath can be damaged, turning a planned connection or maintenance task into a more involved repair.

Rennsteig Master Set In Cases at Industrial Shed includes two specialist fibre-optic cable opening kits: the RAUCUT I Master Set In Case & RAUCUT II Master Set In Case.

These are purpose-designed buffer tube opening systems, not general electrical crimping kits, mechanical master tool sets or fibre-optic fusion splicers.

For compatible smaller buffer tube applications, explore Rennsteig Cable Guides for RAUCUT I interchangeable guides. For other specialist cable preparation equipment, see Rennsteig Insulation Stripper & Blades, noting that conventional electrical insulation strippers do not replace fibre-optic buffer tube opening tools.

The key selection decision is the buffer tube diameter & the method required to open it without damaging the fibres.

What Are Rennsteig Master Set In Cases?

The master sets in this collection are cased RAUCUT tools used to open fibre-optic buffer tubes.

Fibre-optic cables may contain optical fibres within protective tubes. During installation, branching or repair work, technicians sometimes need to access those fibres without unnecessarily cutting through the entire tube.

The two systems address different tube sizes & use different guide components.

► RAUCUT I: Designed for opening cut or uncut mini-buffer tubes, using interchangeable tube guides.
► RAUCUT II: Designed for opening larger uncut buffer tubes, using guide rollers & an adjustable cutting arrangement.
► Application-specific accessories: Each set contains components associated with its particular RAUCUT system.
► Protective case: Keeps the tool & included accessories together for transport & workshop storage.
► Serviceable components: Rennsteig identifies replacement cutting components & guides for the corresponding systems.

The sets are not interchangeable simply because both are supplied in cases.

Why Choose Rennsteig Master Set In Cases?

Access Fibres Without Unnecessary Tube Separation

The RAUCUT systems are designed for opening compatible buffer tubes during fibre-optic cable preparation.

This can be useful where the installation procedure requires access to fibres within an existing tube.

Select a Tool for the Tube Diameter

RAUCUT I & RAUCUT II cover different buffer tube diameter ranges.

Choosing the correct system helps avoid attempting a procedure with unsuitable guiding geometry.

Keep Accessories Together

The supplied case provides a dedicated place for the tool & its associated guides, rollers or service accessories.

Support Planned Fibre Maintenance

A correctly configured buffer tube opening tool can be part of a controlled fibre access or branching procedure.

Maintain the System With Specified Components

Rennsteig lists replacement guides, rollers & blades for the relevant RAUCUT systems.

These parts must be matched to the exact tool model.

Common Applications

Fibre-Optic Cable Access

Technicians may need to expose fibres inside a compatible buffer tube during installation or maintenance.

Mid-Span Fibre Access

Where permitted by the cable design & work procedure, an uncut buffer tube may need opening at a selected location.

Telecommunications Network Maintenance

Specialist fibre technicians may use the correct RAUCUT system during approved network rework or cable servicing.

Fibre Distribution & Branching Work

Buffer tube access can be necessary when preparing fibres for a planned branch or connection.

Fibre-Optic Workshop Preparation

Workshops can configure the appropriate RAUCUT tool before carrying out cable preparation on a known tube construction.

For other connector-related workshop tasks, Rennsteig Assembly Tools covers separate electrical contact insertion & removal applications.

Product Selection Guide

Compare RAUCUT I & RAUCUT II

Feature

RAUCUT I

RAUCUT II

Industrial Shed SKU

800710706AF

800730306AF

Manufacturer reference

8007 1070 6

8007 3030 6

Primary application

Mini-buffer tube opening

Larger buffer tube opening

Documented tube diameter range

0.9–4.2 mm

4–14 mm

Guiding system

Interchangeable tube guides

Interchangeable guide rollers

Supplied case

Yes

Yes

Manufacturer-listed weight

940 g

2,900 g

The AF-suffixed retail references should be confirmed against the corresponding manufacturer products before ordering.

RAUCUT I – For Mini-Buffer Tubes

The RAUCUT I is designed to open cut or uncut mini-buffer tubes while reducing the risk of damage to the enclosed optical fibres when used correctly.

The manufacturer lists the following included tube guides:

► 1.8 mm
► 2.0 mm
► 2.4 mm
► 2.8 mm
► 3.0 mm
► 3.5 mm
► 4.2 mm

The manufacturer's case specification also lists a spatula, Allen key & replacement blade.

Additional guide sizes are available separately.

RAUCUT II – For Larger Buffer Tubes

The RAUCUT II is intended for opening larger uncut buffer tubes.

Rennsteig documents an adjustable cutting arrangement with guide rollers for compatible tube diameters.

The manufacturer lists six included guide rollers:

► 5 mm
► 6 mm
► 7 mm
► 8 mm
► 9 mm
► 10 mm

The case specification also identifies a knob, Allen key, screwdriver & spatula.

Other roller sizes are available separately for compatible applications.

Step 1: Identify the Buffer Tube

Measure the actual outside diameter of the tube being opened.

Do not select the tool using the overall cable diameter.

Step 2: Check the Tube Construction

Confirm the cable manufacturer's permitted opening method.

Different tube materials & fibre arrangements may require different procedures.

Step 3: Select the Appropriate RAUCUT System

Use RAUCUT I for compatible mini-buffer tubes within its specified range.

Use RAUCUT II for larger compatible buffer tubes within its documented range.

Step 4: Confirm Included Accessories

Check whether the guide or roller size required for the job is included in the case.

A tool's full operating range does not mean every available guide is supplied.

Step 5: Plan the Fibre Handling Procedure

Opening a buffer tube is only one stage of fibre preparation.

Follow the applicable cleaning, fibre handling, protection & testing requirements.

Expert Tips

Measure the Tube Before Choosing a Guide

Select the guide or roller for the actual buffer tube diameter.

Avoid Excessive Cutting Depth

Follow the manufacturer's adjustment procedure to minimise the risk of fibre damage.

Inspect the Tool Before Use

Check the cutting edge, guide components & adjustment mechanism for damage or contamination.

Keep Guides & Rollers Identified

Store components with their sizes visible to reduce changeover errors.

For additional workshop organisation, explore Tool Storage.

Use Appropriate Fibre Safety Procedures

Handle fibre shards as sharps, use suitable eye protection & follow the workplace's fibre-disposal procedure.

Never look into an optical fibre without confirming that it is safe to do so.

Verify the Opening Method

Do not assume every fibre cable can be opened mid-span.

Check the cable manufacturer's instructions & the approved network work method.

Maintain Cutting Components

Replace damaged or worn parts using the correct manufacturer reference.

For general equipment maintenance guidance, see Tool & Equipment Care.