Precision Cutting for Copper & Aluminium Electrical Cables
Clean cable preparation starts with a cutter matched to the conductor. Damaged strands, flattened insulation & uneven cuts can make stripping & terminal assembly more difficult, particularly during repetitive electrical work.
Rennsteig Cable Shears are professional cutting tools for compatible copper & aluminium electrical conductors. The collection includes compact D15 cutters, D20 models & longer-handled D27 shears for different approved cable sizes.
Industrial Shed offers 170 mm, 200 mm & 500 mm cable shear options, including selected spring-opening variants. With different cutting capacities across the range, the correct tool should be selected according to conductor material, construction & diameter—not overall tool length alone.
Explore Related Cable Preparation Tools
► Rennsteig | Crimping Pliers – Specialist crimping tools for compatible electrical terminals.
► Rennsteig | Repair Kits – Cable stripping, crimping & repair equipment for specified applications.
► Rennsteig | Multifunctional Tools – Combined cutting, stripping & crimping tools for compatible MC4 solar cable.
What Are Rennsteig Cable Shears?
Rennsteig cable shears are purpose-designed cutters for preparing suitable electrical conductors.
Their cutting geometry differs from general-purpose side cutters & is intended for approved cable materials.
The collection includes three principal tool families:
► D15 cable shears: Compact tools for specified copper & aluminium cable applications.
► D20 cable shears: Larger hand cutters with increased capacity for compatible conductors.
► D27 cable shears: Longer-handled cutters for larger approved copper & aluminium cables.
Selected D15 variants also include an opening spring or specified stripping function.
The cutting capacity varies by model & conductor construction. Always check both the maximum cable diameter & the permitted conductor cross-sectional area.
Why Choose Rennsteig Cable Shears?
Purpose-Designed Cutting Geometry
Rennsteig cable shears are designed to cut compatible conductors while reducing unnecessary cable deformation when used correctly.
Multiple Cutting Capacities
Different D15, D20 & D27 models accommodate different approved cable sizes.
This allows buyers to select a tool according to their electrical application.
Compact & Longer-Handled Options
Smaller cutters may be practical for confined electrical work.
Longer-handled models provide an alternative for larger compatible conductors.
Spring-Opening Variants
Selected D15 models feature an opening spring, helping the handles reopen between cuts during repetitive work.
Support for Accurate Cable Preparation
A clean conductor end makes subsequent stripping & terminal preparation easier to assess.
The cutter must still be matched to the cable & followed by the appropriate preparation process.
Common Applications
Electrical Installation & Switchboard Assembly
Electricians preparing conductors for terminals & control-panel wiring need suitable cutting equipment.
The tool must meet the cable's material & capacity requirements.
Automotive Electrical Repairs
Vehicle wiring work may require compact cable cutters for access around harnesses & electrical components.
For workshop context, read A Day With An Automotive Mechanic Peninsula.
Industrial Maintenance
Electrical maintenance teams may cut replacement conductors during approved repairs or equipment servicing.
Always isolate electrical equipment before cutting.
Solar Cable Preparation
Photovoltaic cable requires accurate cutting before stripping & contact crimping.
For compatible solar termination equipment, explore Rennsteig | Solar Crimpers.
Workshop Cable Assembly
Repeated cable preparation benefits from consistent cutting methods, suitable tooling & inspection.
For associated cable measurement tasks, browse Measuring & Layout Tools.
Product Selection Guide
Choose Rennsteig cable shears by conductor material, construction, cross-sectional area & cable diameter.
|
Model
|
Industrial Shed SKU
|
Maximum cable diameter
|
Published cutting capacity
|
Key feature
|
|
D15
|
7000153
|
15 mm
|
Solid Cu 16 / Al 35 mm²; multi-conductor Cu/Al 50 mm²; fine-stranded Cu 70 mm²
|
Compact cable cutter
|
|
D15 with spring
|
7000163
|
15 mm
|
Same published capacity categories as standard D15
|
Opening spring
|
|
D15 with spring & stripping function
|
7001163
|
12 mm
|
Solid Cu/Al 16 mm²; multi-conductor Cu/Al 25 mm²; fine-stranded Cu 35 mm²
|
Spring & stripping function
|
|
D20
|
7000203
|
20 mm
|
Solid Cu 16 / Al 50 mm²; multi-conductor Cu/Al 70 mm²; fine-stranded Cu 95 mm²
|
Two-stage cutting geometry
|
|
D27
|
7000272
|
27 mm
|
Multi-conductor Cu 150 / Al 240 mm²; fine-stranded Cu 185 mm²
|
Longer-handled design
|
Cu = copper; Al = aluminium. Capacities refer to the specified conductor construction & exact tool model.
Rennsteig D15 Cable Shears
Compact D15 cutters suit compatible electrical cable preparation where their rated capacity is sufficient.
The standard 7000153 is rated for cable diameters up to 15 mm.
The 7000163 adds an opening spring.
The 7001163 includes an opening spring & stripping function but has a lower published cutting capacity than the standard D15.
Best suited to: Electrical assembly & maintenance work requiring compact cutting equipment.
Rennsteig D20 Cable Shears
The 7000203 D20 model is rated for cable diameters up to 20 mm.
Its published capacity includes multi-conductor copper or aluminium cable up to 70 mm² & fine-stranded copper cable up to 95 mm².
Best suited to: Compatible electrical cables requiring a larger rated hand cutter.
Rennsteig D27 Cable Shears
The 7000272 D27 is a longer-handled cutter rated for cable diameters up to 27 mm.
Published capacities include multi-conductor copper cable up to 150 mm², multi-conductor aluminium cable up to 240 mm² & fine-stranded copper cable up to 185 mm².
Best suited to: Larger approved copper & aluminium cable applications.
The D27 must not be assumed suitable for steel wire, wire rope or armoured cable.
How to Choose the Right Cable Shears?
Identify the conductor material. Confirm copper, aluminium or another cable type.
Check conductor construction. Solid, multi-conductor & fine-stranded cables have different ratings.
Compare cutting capacity. Check cross-sectional area against the manufacturer's limits.
Check outside diameter. Ensure the cable fits within the rated maximum.
Assess working access. Choose a tool size suitable for the workspace.
Review handle features. Opening springs & stripping functions vary by model.
Plan the next operation. Cutting, stripping & crimping require compatible equipment.
For contact-positioning accessories used in compatible crimping systems, explore Rennsteig | Locators.
For tool storage & transport, browse Heavy-Duty Tool Bags.
Expert Tips
► Isolate electrical circuits. Never use ordinary cable shears on energised conductors.
► Check cable diameter & cross-section. Both must be within the tool's capacity.
► Confirm conductor construction. Fine-stranded cable may have different limits from solid cable.
► Avoid excluded materials. Do not cut steel wire or wire rope unless the tool is expressly rated for it.
► Inspect the cutting edges. Check for wear, damage or contamination.
► Position the cable correctly. Follow the manufacturer's cutting instructions.
► Avoid twisting the blades. Side loading can damage the tool.
► Never force an oversized cable. Use a properly rated cutter.
► Inspect the cut end. Check for damaged strands or crushed insulation.
► Use the correct stripper. Cable cutting & insulation stripping are different operations unless specifically combined.
► Match the crimping tool to the terminal. Cutting alone does not establish termination suitability.
► Clean & store the shears properly. Protect the cutting edges from damage & corrosion.
For maintenance guidance, read How to Clean Your Gear Without Ruining It.
For seasonal equipment preparation, explore Spring Jobsite Prep Getting Your Gear Ready.
For broader tool selection advice, read The Apprentice's First Tool Kit: What You Actually Need.