► Rennsteig | Cable Cutters

Heavy-Duty Ratchet Cutting for Large Copper & Aluminium Cables Cutting large electrical cables requires the right combination of capacity, blade geometry & mechanical leverage. When the cable exceeds a cutter's approved limits, forcing the tool can damage the blades, distort the conductor or create an unsafe cutting operation. Rennsteig Cable...

Heavy-Duty Ratchet Cutting for Large Copper & Aluminium Cables

Cutting large electrical cables requires the right combination of capacity, blade geometry & mechanical leverage. When the cable exceeds a cutter's approved limits, forcing the tool can damage the blades, distort the conductor or create an unsafe cutting operation.

Rennsteig Cable Cutters at Industrial Shed includes the D60 & D100 heavy-duty ratchet cable cutters, designed for suitable copper & aluminium electrical cables in industrial installation, maintenance & cable preparation work.

For the next stage of cable preparation, explore Rennsteig Insulation Stripper & Blades. If you're maintaining a different compatible cable-shear model, Rennsteig Replacement Cutting Heads covers a D38 replacement component—not a replacement blade for the D60 or D100.

These cutters are designed for large cable-cutting tasks where a small hand shear may lack the required capacity.

Choose between the D60 & D100 by cable diameter, conductor material, cable construction & the manufacturer's specified cutting limits.

What Are Rennsteig Cable Cutters?

Rennsteig cable cutters are purpose-designed tools for cutting compatible electrical cables.

The D60 & D100 use a ratchet-action mechanism to provide mechanical advantage during cutting. Both incorporate adjustable telescopic arms, allowing the operator to change the handle length for the task.

Manufacturer-documented features include:

► Ratchet cutting mechanism: Supports progressive cutting of suitable large electrical cable.
► Telescopic handles: Allow adjustment of the tool's operating length.
► Special cutting contour: Designed for the intended cable-cutting application.
► Emergency release mechanism: Allows the cutter to be released according to the manufacturer's instructions.
► Opening during the cutting process: The cutter can be opened at different cutting positions.
► Replaceable blades: Manufacturer-supported replacement blades are available, with replacement work recommended through Rennsteig or an authorised partner.

Both models are intended for specified copper & aluminium cables, including certain lead-coated cable constructions.

Neither cutter is suitable for steel wire or wire rope.

Why Choose Rennsteig Cable Cutters?

Handle Larger Cable Diameters

The D60 is rated for cable diameters up to 60 mm, while the D100 is rated up to 100 mm.

The diameter rating is only one part of the specification. Conductor material & construction must also fall within the approved limits.

Benefit From Ratchet Operation

The ratchet mechanism allows cutting to progress through a series of controlled handle movements rather than relying on one continuous closing action.

Adjust Handle Length

Telescopic arms allow operators to adapt the handle position & available leverage to the task.

Support Planned Cable Preparation

For large cable installation or workshop cutting, using the correct cutter can help maintain a repeatable preparation process before stripping & termination.

Maintain Equipment Through Approved Servicing

Rennsteig identifies replacement blades for the D60 & D100.

Blade replacement should be arranged through the manufacturer or an authorised partner rather than treated as an unrestricted DIY modification.

Common Applications

Industrial Electrical Installation

Large copper & aluminium conductors may require cutting during switchboard installation, cable replacement or industrial equipment upgrades.

Switchboard & Distribution Work

Electrical contractors preparing large feeder cables need to match cutting capacity to conductor construction.

Plant Maintenance

Industrial maintenance teams may use heavy-duty cable cutters when replacing suitable power cables or preparing cable sections for authorised repair work.

Electrical Cable Assembly

Production workshops may cut large cable lengths before insulation removal, lug preparation or other termination processes.

Infrastructure & Service Work

The D60 & D100 may be relevant where large approved cable constructions must be cut in accessible or constrained work areas.

For a separate photovoltaic connector assembly workflow, Rennsteig Solar Kits covers smaller application-specific cutting, stripping & crimping tools.

Product Selection Guide

Compare D60 vs D100

Specification

D60

D100

Industrial Shed SKU

7120603AF

7121003AF

Corresponding manufacturer reference

712 060 3

712 100 3

Maximum cable diameter

60 mm

100 mm

Multi-conductor copper

630 mm²

800 mm²

Multi-conductor aluminium

800 mm²

1,000 mm²

Fine-stranded copper

800 mm²

1,000 mm²

Sector-shaped copper

740 mm²

960 mm²

Sector-shaped aluminium

960 mm²

1,200 mm²

Manufacturer-listed dimension

610 mm

660 mm

Manufacturer-listed weight

4.5 kg

5.7 kg

These are the manufacturer's specifications for the corresponding base models. Confirm the AF-suffixed retail SKUs before ordering.

Choose the D60 When

► The cable diameter is within the specified 60 mm maximum.
► The cable material & construction meet the D60's published limits.
► A smaller, lighter cutter is preferable for the planned work.

Choose the D100 When

► The cable diameter exceeds the D60's approved capacity but remains within the D100's 100 mm maximum.
► The conductor material & construction meet the D100's published limits.
► The job requires the larger model's documented cutting capacity.

Understand Diameter vs Cross-Section

A cable's outside diameter includes insulation & other layers.

Its conductor cross-section describes the conductive material, usually in mm².

A cable can satisfy the diameter limit but still be unsuitable because of conductor construction or material.

Check both specifications.

Confirm Cable Construction

Rennsteig documents capacities for different conductor constructions, including multi-conductor, fine-stranded & sector-shaped cables.

Do not apply one capacity figure to every cable type.

Check for Steel Reinforcement

The D60 & D100 are not intended for steel wire or wire rope.

Do not assume that a steel-armoured or otherwise reinforced cable is suitable merely because its diameter is within range.

Plan the Next Preparation Stage

After cutting, the cable may require stripping, inspection & termination.

For suitable electrical cable repair applications, Rennsteig Repair Kits covers a separate manual repair-tool system.

Expert Tips

Inspect the Cable Before Cutting

Confirm the material, construction, diameter & required cut location.

Use the Ratchet Mechanism as Designed

Follow the operating instructions rather than forcing the handles or adding unauthorised extensions.

Support Heavy Cable

Large cable sections can shift during cutting.

Secure & support the work appropriately to reduce uncontrolled movement.

Keep Hands Clear of the Cutting Head

Never place fingers near the blades or ratchet mechanism during operation.

Do Not Cut Energised Cable

Follow the applicable isolation, lockout & verification procedures before cutting electrical conductors.

Inspect the Blades & Mechanism

Check for chipped edges, abnormal movement or damage before returning the cutter to service.

For storing large workshop tools, explore Tool Storage.

Arrange Approved Blade Replacement

Rennsteig recommends blade replacement through the manufacturer or an authorised service partner.

For general maintenance guidance, see Tool & Equipment Care.

Why Buy From Industrial Shed?

Industrial Shed supplies professional cutting equipment to Australian electrical contractors, industrial maintenance teams & trade workshops.

The Rennsteig D60 & D100 provide two clearly differentiated capacity options for large electrical cable-cutting applications.

► Two identifiable heavy-duty ratchet cutters
► 60 mm & 100 mm maximum cable-diameter options
► Manufacturer-documented copper & aluminium capacities
► Telescopic handles & ratchet operation
► Access to Warranty & Parts Support

For product selection assistance, contact supportHQ@industrialshed.net.au with the cable material, construction, outside diameter & conductor cross-section.

Cut Large Cable With the Right Capacity

Choose Rennsteig cable cutters matched to the cable—not just the job description. Compare D60 & D100 specifications, verify your conductor requirements & equip your workshop for controlled heavy-duty cable cutting.

Frequently Asked Questions

What's the difference between the Rennsteig D60 & D100?

The D60 is rated for cable diameters up to 60 mm. The D100 is rated up to 100 mm, with higher specified capacities for several conductor types.

Can these cutters cut aluminium cable?

Yes, within the manufacturer's limits for the relevant aluminium conductor construction.

Are the D60 & D100 hydraulic cutters?

No. Rennsteig describes these models as manually operated ratchet cable cutters with telescopic handles.

Can they cut steel wire or wire rope?

No. Rennsteig expressly excludes those materials.

Can I use the D60 on any cable smaller than 60 mm?

No. Diameter alone is insufficient. Material, conductor construction & cross-sectional limits also apply.

Are replacement blades available?

Yes. Rennsteig documents replacement blades & recommends replacement work through the manufacturer or an authorised partner.

Brands

► Rennsteig | Cable Cutters

Heavy-Duty Ratchet Cutting for Large Copper & Aluminium Cables

Cutting large electrical cables requires the right combination of capacity, blade geometry & mechanical leverage. When the cable exceeds a cutter's approved limits, forcing the tool can damage the blades, distort the conductor or create an unsafe cutting operation.

Rennsteig Cable Cutters at Industrial Shed includes the D60 & D100 heavy-duty ratchet cable cutters, designed for suitable copper & aluminium electrical cables in industrial installation, maintenance & cable preparation work.

For the next stage of cable preparation, explore Rennsteig Insulation Stripper & Blades. If you're maintaining a different compatible cable-shear model, Rennsteig Replacement Cutting Heads covers a D38 replacement component—not a replacement blade for the D60 or D100.

These cutters are designed for large cable-cutting tasks where a small hand shear may lack the required capacity.

Choose between the D60 & D100 by cable diameter, conductor material, cable construction & the manufacturer's specified cutting limits.

What Are Rennsteig Cable Cutters?

Rennsteig cable cutters are purpose-designed tools for cutting compatible electrical cables.

The D60 & D100 use a ratchet-action mechanism to provide mechanical advantage during cutting. Both incorporate adjustable telescopic arms, allowing the operator to change the handle length for the task.

Manufacturer-documented features include:

► Ratchet cutting mechanism: Supports progressive cutting of suitable large electrical cable.
► Telescopic handles: Allow adjustment of the tool's operating length.
► Special cutting contour: Designed for the intended cable-cutting application.
► Emergency release mechanism: Allows the cutter to be released according to the manufacturer's instructions.
► Opening during the cutting process: The cutter can be opened at different cutting positions.
► Replaceable blades: Manufacturer-supported replacement blades are available, with replacement work recommended through Rennsteig or an authorised partner.

Both models are intended for specified copper & aluminium cables, including certain lead-coated cable constructions.

Neither cutter is suitable for steel wire or wire rope.

Why Choose Rennsteig Cable Cutters?

Handle Larger Cable Diameters

The D60 is rated for cable diameters up to 60 mm, while the D100 is rated up to 100 mm.

The diameter rating is only one part of the specification. Conductor material & construction must also fall within the approved limits.

Benefit From Ratchet Operation

The ratchet mechanism allows cutting to progress through a series of controlled handle movements rather than relying on one continuous closing action.

Adjust Handle Length

Telescopic arms allow operators to adapt the handle position & available leverage to the task.

Support Planned Cable Preparation

For large cable installation or workshop cutting, using the correct cutter can help maintain a repeatable preparation process before stripping & termination.

Maintain Equipment Through Approved Servicing

Rennsteig identifies replacement blades for the D60 & D100.

Blade replacement should be arranged through the manufacturer or an authorised partner rather than treated as an unrestricted DIY modification.

Common Applications

Industrial Electrical Installation

Large copper & aluminium conductors may require cutting during switchboard installation, cable replacement or industrial equipment upgrades.

Switchboard & Distribution Work

Electrical contractors preparing large feeder cables need to match cutting capacity to conductor construction.

Plant Maintenance

Industrial maintenance teams may use heavy-duty cable cutters when replacing suitable power cables or preparing cable sections for authorised repair work.

Electrical Cable Assembly

Production workshops may cut large cable lengths before insulation removal, lug preparation or other termination processes.

Infrastructure & Service Work

The D60 & D100 may be relevant where large approved cable constructions must be cut in accessible or constrained work areas.

For a separate photovoltaic connector assembly workflow, Rennsteig Solar Kits covers smaller application-specific cutting, stripping & crimping tools.

Product Selection Guide

Compare D60 vs D100

Specification

D60

D100

Industrial Shed SKU

7120603AF

7121003AF

Corresponding manufacturer reference

712 060 3

712 100 3

Maximum cable diameter

60 mm

100 mm

Multi-conductor copper

630 mm²

800 mm²

Multi-conductor aluminium

800 mm²

1,000 mm²

Fine-stranded copper

800 mm²

1,000 mm²

Sector-shaped copper

740 mm²

960 mm²

Sector-shaped aluminium

960 mm²

1,200 mm²

Manufacturer-listed dimension

610 mm

660 mm

Manufacturer-listed weight

4.5 kg

5.7 kg

These are the manufacturer's specifications for the corresponding base models. Confirm the AF-suffixed retail SKUs before ordering.

Choose the D60 When

► The cable diameter is within the specified 60 mm maximum.
► The cable material & construction meet the D60's published limits.
► A smaller, lighter cutter is preferable for the planned work.

Choose the D100 When

► The cable diameter exceeds the D60's approved capacity but remains within the D100's 100 mm maximum.
► The conductor material & construction meet the D100's published limits.
► The job requires the larger model's documented cutting capacity.

Understand Diameter vs Cross-Section

A cable's outside diameter includes insulation & other layers.

Its conductor cross-section describes the conductive material, usually in mm².

A cable can satisfy the diameter limit but still be unsuitable because of conductor construction or material.

Check both specifications.

Confirm Cable Construction

Rennsteig documents capacities for different conductor constructions, including multi-conductor, fine-stranded & sector-shaped cables.

Do not apply one capacity figure to every cable type.

Check for Steel Reinforcement

The D60 & D100 are not intended for steel wire or wire rope.

Do not assume that a steel-armoured or otherwise reinforced cable is suitable merely because its diameter is within range.

Plan the Next Preparation Stage

After cutting, the cable may require stripping, inspection & termination.

For suitable electrical cable repair applications, Rennsteig Repair Kits covers a separate manual repair-tool system.

Expert Tips

Inspect the Cable Before Cutting

Confirm the material, construction, diameter & required cut location.

Use the Ratchet Mechanism as Designed

Follow the operating instructions rather than forcing the handles or adding unauthorised extensions.

Support Heavy Cable

Large cable sections can shift during cutting.

Secure & support the work appropriately to reduce uncontrolled movement.

Keep Hands Clear of the Cutting Head

Never place fingers near the blades or ratchet mechanism during operation.

Do Not Cut Energised Cable

Follow the applicable isolation, lockout & verification procedures before cutting electrical conductors.

Inspect the Blades & Mechanism

Check for chipped edges, abnormal movement or damage before returning the cutter to service.

For storing large workshop tools, explore Tool Storage.

Arrange Approved Blade Replacement

Rennsteig recommends blade replacement through the manufacturer or an authorised service partner.

For general maintenance guidance, see Tool & Equipment Care.