Truck, Trailer & Vehicle Wheel Restraint
A wheel chock needs to suit the vehicle sitting in front of you. Red Cat wheel chocks provide practical wheel restraint for suitable trucks, trailers, utes, caravans & workshop applications, with selection based on tyre size, chock dimensions, vehicle type & the conditions where the equipment will be used.
For vehicle maintenance, Lifting & Jacking Equipment covers related workshop equipment, while Car Repair & Maintenance connects wheel restraint with the wider vehicle-maintenance setup.
What Are Wheel Chocks?
Wheel chocks are shaped blocks positioned against a tyre to help restrict unintended wheel movement while a vehicle or trailer is stationary.
They may also be described as:
► Tyre chocks
► Vehicle chocks
► Wheel blocks
► Truck wheel chocks
► Trailer wheel chocks
The principle is simple. Choosing the right chock still requires some thought.
A chock that suits a light trailer should not automatically be assumed suitable for a commercial truck, larger trailer or other vehicle simply because it fits behind the tyre.
Choosing the Right Wheel Chock
Start with the vehicle & tyre, then compare those requirements with the specifications of the individual chock.
|
Check
|
Why It Matters
|
|
Vehicle type
|
A ute, caravan, trailer & truck can present very different requirements
|
|
Tyre dimensions
|
Chock dimensions need to make sense relative to the tyre
|
|
Chock dimensions
|
Height, width & overall shape affect how the chock meets the tyre
|
|
Intended application
|
Parking, maintenance, loading & trailer use can involve different conditions
|
|
Ground surface
|
Concrete, gravel, dirt & uneven surfaces behave differently
|
|
Gradient
|
The direction & potential for vehicle movement need to be considered
|
|
Product specifications
|
Individual Red Cat products should be checked for their stated application & characteristics
|
If the vehicle is part of a fleet or workshop, it also makes sense to standardise which chocks belong with which vehicles rather than relying on whatever happens to be available.
Chock Size Should Make Sense Beside the Tyre
Stand the chock beside the tyre before relying on it.
Does it provide meaningful contact with the tyre, or does it look undersized for the wheel?
Australian suppliers commonly discuss wheel-chock dimensions in relation to tyre diameter. Some use general sizing guides based on a proportion of tyre height, but those guides should not replace the specifications of the individual chock, vehicle instructions or workplace requirements.
This becomes increasingly important as tyre & vehicle size increase.
The wheel chock carried with a small trailer may not be appropriate for a truck simply because both vehicles have wheels.
For work involving tyres, wheels & related vehicle servicing, Tyre & Wheel Services provides a useful pathway into the surrounding equipment.
Check How the Chock Meets the Tyre?
Once positioned, the chock should sit properly against the tyre rather than making marginal contact at an awkward point.
Take a moment to look at the setup from the side.
Check that the chock is sitting correctly on the ground & that nothing is preventing it from reaching the tyre as intended.
Mud, stones, loose material or other debris around the contact area can change how the chock sits.
This is particularly worth checking on trailers & work vehicles that regularly move between sealed surfaces, gravel yards & jobsites.
The Ground Matters Too
The chock is working between two surfaces: the tyre & the ground.
A clean workshop floor presents different conditions from gravel, wet pavement, loose dirt or an uneven worksite.
Before positioning a wheel chock, look for:
► Loose stones or material
► Oil or grease
► Water
► Soft ground
► Significant surface damage
► Uneven contact
► Objects underneath the chock
If the chock cannot sit properly on the surface, pushing it harder against the tyre does not solve the problem.
Choose an appropriate parking position wherever possible before setting up the vehicle.
Trucks, Trailers, Utes & Caravans
Different vehicles deserve different consideration.
Trucks
Check tyre dimensions, individual chock specifications & any procedures applying to the vehicle or workplace. Do not assume a product is suitable for commercial vehicles purely because it is physically large.
Trailers
Consider what happens both connected & disconnected from the tow vehicle. Ground conditions, trailer brakes, loading activity & possible direction of movement all matter.
Utes & service vehicles
Wheel chocks may form part of a broader workshop, roadside or fleet-maintenance setup. Keep the appropriate equipment accessible with the vehicle where required.
Caravans
Consider tyre size, parking surface, gradient & the manufacturer's instructions for securing the caravan when stationary.
There is no advantage in treating these applications as though their requirements are identical.
Trailer Chocking Needs Its Own Plan
A disconnected trailer deserves particular attention because the tow vehicle is no longer controlling its position.
Before loading, unloading or carrying out maintenance, look at:
► Ground condition
► Gradient
► Trailer braking arrangement
► Tyre size
► Direction the trailer could move
► Chock placement
► Changes in load during the job
A box trailer being unloaded on level concrete is a different situation from a larger trailer parked on an uneven site.
Use wheel chocks suited to the actual trailer & follow the relevant trailer instructions.
Wheel Chocks & the Parking Brake Have Different Jobs
Wheel chocks provide a physical restraint at the tyre.
The parking brake is part of the vehicle's braking system.
One should not casually be treated as a replacement for the other.
When parking or carrying out maintenance, use the vehicle's braking controls as required & add wheel chocking where appropriate for the task.
For inspection work around fleet, trade & workshop vehicles, Vehicle Inspection connects the setup with broader vehicle-checking equipment.
Working on a Vehicle?
Before tools come out, make sure the vehicle is properly set up for the work being performed.
Depending on the job, that can include parking in a suitable location, applying the required braking controls, positioning appropriate wheel chocks & using correctly selected lifting or support equipment.
Wheel chocks help control wheel movement.
They do not replace equipment required to lift or support a vehicle.
If the vehicle needs to be raised, follow the instructions for the jack, stands, hoist or other equipment being used.
For a look at the practical environment behind day-to-day workshop work, see A Day With An Automotive Mechanic Peninsula.
Placement Depends on the Situation
There is no useful reason to give every vehicle owner the same placement instruction regardless of vehicle configuration, gradient or task.
Think about the direction in which the vehicle could move.
On a slope, that becomes particularly important.
With workplace vehicles, trailers or plant, follow the applicable operating procedure & the instructions for the equipment involved.
Once positioned, check the chock before beginning work rather than assuming it stayed exactly where it was placed.
Don't Overlook the Condition of the Chock
Wheel chocks are uncomplicated pieces of equipment, so they can easily stay in service without much attention.
Give them a quick inspection.
Depending on the construction of the individual product, signs worth investigating can include:
► Cracking
► Splitting
► Significant deformation
► Excessive wear
► Missing material
► Damage to a handle or rope point where fitted
► Contamination affecting the contact surfaces
Damaged equipment should be assessed against the manufacturer's requirements before being returned to use.
A chock that has spent years loose in the back of a truck deserves more than a quick kick before it goes under a tyre.
Storage Is Part of the Setup
Wheel chocks are most useful when they're available where the vehicle is actually being used.
For trucks, trailers, service vehicles & fleet equipment, think about where they will be stored between jobs.
The storage location should keep them accessible without allowing them to become loose cargo or interfere with other equipment.
This is particularly useful where several vehicles are maintained by different operators. A defined storage position makes it easier to see whether the equipment is present before the vehicle leaves.
Tool Storage provides related options for keeping workshop & vehicle equipment organised.
Avoid Improvised Wheel Blocks
A timber offcut or brick may happen to fit behind a tyre. That does not make it an appropriate substitute for equipment selected for the job.
Improvised objects can split, move, crumble or make poor contact with the tyre.
Keeping suitable wheel chocks with the vehicle or in a known workshop location removes the temptation to use whatever happens to be nearby.
The Jobsite Doesn't Forgive. We Do. looks more broadly at what happens when equipment has to work in real trade conditions.
A Quick Check Before Use
You don't need to turn wheel chocking into a complicated exercise.
A sensible check covers the essentials.
Look at the vehicle.
Know what you're trying to restrain.
Look at the tyre.
Make sure the chock dimensions are appropriate for the wheel.
Look at the ground.
Check that the chock can sit properly on the surface.
Look at the slope.
Consider the direction in which movement could occur.
Look at the chock.
Check for obvious damage or contamination.
Set it properly.
Position the chock according to the vehicle, conditions & applicable instructions.
Then confirm the setup before the work begins.
Make Wheel Chocking Part of the Setup
The easiest time to think about wheel movement is before the job starts.
Park properly, look at the ground, apply the required vehicle controls & put the appropriate chocks in place before the workshop or loading work gets underway.
That approach is easier than trying to correct the setup once the vehicle is already being worked on.
For more on getting equipment organised before workload increases, read Spring Jobsite Prep Getting Your Gear Ready.