► Red Cat | Tail Gate Kits

Purpose-Built Hardware for Trailer, Tipper & Transport Body Repairs A tailgate that begins to sag, bind or close unevenly is rarely just an inconvenience; it is often evidence of wear somewhere within the supporting hardware. Red Cat Tail Gate Kits cover body-hardware components associated with tailgate assemblies used across suitable...

Purpose-Built Hardware for Trailer, Tipper & Transport Body Repairs

A tailgate that begins to sag, bind or close unevenly is rarely just an inconvenience; it is often evidence of wear somewhere within the supporting hardware. Red Cat Tail Gate Kits cover body-hardware components associated with tailgate assemblies used across suitable trailers, tippers, truck bodies & transport equipment.

Effective repair begins with understanding the assembly rather than replacing the first visibly worn component. Tailgate systems can incorporate hinges, pivots, pins, bushes, catches & related fittings, with the exact arrangement determined by how the gate is designed to move. Identifying that operating geometry, measuring the existing components & inspecting the surrounding structure provides a far more reliable basis for selecting replacement hardware.

Where the repair also involves mounting components, Bolts & Fasteners provides related hardware for suitable installations.

What Are Red Cat Tail Gate Kits?

Red Cat Tail Gate Kits are body-hardware components used within compatible tailgate, trailer & transport-body assemblies.

Rather than viewing a tailgate as a simple hinged panel, it is more useful to consider it as a mechanical system. The gate must pivot around defined points while catches, pins, bushes or other hardware control its movement, retention & closing position.

Different body designs achieve this in different ways.

A conventional trailer tailgate may pivot around a relatively straightforward hinge arrangement. Side-swing configurations introduce a different axis of movement, while tipper bodies can rely on their own hinge, pivot & retaining arrangements to control the gate during unloading.

For that reason, component selection should begin with the operating system rather than the appearance of an individual part.

Similar-looking pins, bushes or catches can differ in diameter, length, mounting geometry or intended function. Accurate identification reduces the likelihood of modifying sound equipment simply to accommodate an unsuitable component.

Why Choose Red Cat Tail Gate Kits?

A sound tailgate body can remain serviceable long after individual moving components begin to wear.

Pins, bushes, catches & pivot hardware are subject to repeated movement. Over time, clearance can increase between mating surfaces, fixing points can loosen & the gate may begin to deviate from its original path.

Replacing the appropriate component can restore function without unnecessarily rebuilding the entire assembly.

Successful repair, however, depends on identifying the source of the movement.

A worn bush can allow a gate to drop. A damaged pin can create excessive play. Distorted mounting steel can alter hinge geometry, while movement at one side of the gate can prevent a perfectly serviceable catch from aligning at the other.

This is why diagnosis should extend beyond the component that appears most obviously damaged.

Where an installation calls for less conventional mounting hardware,  Specialty Fasteners provides another relevant hardware category.

Common Applications

Tipper Bodies

A tipper tailgate depends on controlled geometry throughout its movement.

As the body changes position, the tailgate hardware must continue to perform according to the particular design of the assembly. Hinges, pivots, catches & retaining components can all influence how the gate behaves during transport, opening & discharge.

Before replacing worn hardware, establish how the gate is intended to move & identify which component has allowed that movement to change.

Box & Utility Trailers

Uneven gaps around a trailer tailgate can reveal mechanical wear before a component fails completely.

A gate sitting lower on one side may indicate worn pins or bushes, loose mounting hardware, distorted brackets or deterioration around the hinge points.

Comparing both sides of the assembly can be particularly informative because the less-worn side may provide a useful reference for the original position.

Side-Swing Tailgate Systems

Changing the direction of movement changes the hardware requirements.

A side-swing tailgate uses an arrangement designed to support lateral opening rather than relying solely on a conventional tailgate pivot.

Pin dimensions, bush fit, pivot position & catch alignment therefore need to be considered as part of one assembly.

Accurate  Measuring & Layout Tools can assist when checking mounting centres, component dimensions & existing body geometry.

Truck & Transport Bodies

Frequent loading cycles place repeated demands on commercial body hardware.

Truck & transport applications can expose tailgate assemblies to vibration, contamination & continual opening & closing. Small increases in clearance around pivots can eventually become noticeable as gate movement, rattling or poor catch engagement.

Routine inspection should therefore consider both the moving components & the structure supporting them.

Farm & Property Trailers

Outdoor equipment often accumulates wear gradually rather than failing without warning.

Dust, dirt, moisture & intermittent maintenance can affect pivots, catches & mounting hardware across agricultural & property trailers.

Cleaning the assembly before inspection can make excessive movement, damaged surfaces & deteriorating hardware considerably easier to identify.

Fabrication & Trailer Rebuilds

New fabrication removes the old wear pattern but places greater importance on accurate layout.

Pivot points need to be positioned so the tailgate can travel through its intended arc without binding against the surrounding body.

Establish the geometry, trial the movement & confirm component positions before committing to permanent mounting.

Where confirmed fabrication work requires hole preparation, Drill Bit Sets provides related workshop tooling.

Product Selection Guide

The most reliable way to select tailgate hardware is to diagnose the assembly systematically.

Establish the Tailgate Configuration

Begin with the movement itself.

Determine whether the gate uses a conventional pivot, side-swing arrangement, tipper configuration or another body-specific system.

This provides the mechanical context needed to assess the individual components correctly.

Locate the Source of Excess Movement

A misaligned gate does not automatically require a complete set of replacement hardware.

Inspect for:

► Worn pins
► Excessive bush clearance
► Damaged catches
► Loose mounting hardware
► Distorted hinge components
► Cracked mounting areas
► Uneven gate gaps
► Movement where components should remain rigid

Locating the actual source of clearance helps avoid replacing serviceable components unnecessarily.

Measure Pins, Shafts & Bushes

Mechanical fit depends on dimensions, not visual similarity.

Where applicable, record pin or shaft diameter, bush dimensions, component length & mounting centres.

Taking these measurements before dismantling can also preserve useful information that becomes more difficult to establish once the assembly is apart.

Use the Opposite Side as Evidence

Two sides of the same tailgate can tell very different stories.

If one hinge or pivot has suffered more wear, compare it with the corresponding hardware on the other side. Differences in clearance, orientation or mounting position can help identify how far the assembly has moved from its intended condition.

Where both sides are heavily worn, verified component information becomes increasingly important.

Examine the Supporting Structure

Replacement hardware can only perform as intended when the structure supporting it remains sound.

Inspect mounting plates, brackets, welds & surrounding steel for cracking, distortion, elongated holes or previous modifications.

A new pin installed through an already damaged mounting point may reduce one source of movement while leaving another untouched.

Observe the Final Closing Position

Smooth movement through most of the arc does not guarantee correct closure.

Bring the tailgate gradually towards its operating position & observe how the catch or retaining hardware approaches its mating component.

If the components no longer align naturally, investigate hinge wear, body distortion, loose mounting points & previous repairs before altering the catch position.

For suitable bolted assemblies, Nuts & Washers provides related mounting components.

Determine the Installation Method

Not every piece of transport-body hardware is a straightforward bolt-on replacement.

Depending on the assembly, installation may involve drilling, fabrication, welding or reinforcement. Establish those requirements before beginning the repair so the replacement component can be fitted according to its intended arrangement.

Validate the Repair Through Movement

A static inspection is only part of the final check.

Operate the tailgate throughout its intended range, looking for binding, uncontrolled movement, inconsistent clearance or poor catch engagement.

Where the system supports more than one operating position, check each relevant configuration before the equipment returns to service.

Expert Tips

Wear patterns are effectively a mechanical record of how the tailgate has been moving. Read them before removing the evidence.

► Clean the pivot area first. Dirt & accumulated debris can conceal wear around pins, bushes & mounting points.
► Photograph the intact assembly. Images provide a useful reference for component orientation, washers, spacers & retaining hardware.
► Measure before modification. Grinding or drilling should follow confirmed fitment rather than compensate for an incorrectly selected component.
► Inspect holes for elongation. An oval mounting point around a round pin indicates movement that deserves further investigation.
► Compare the gate gaps. Uneven spacing can help reveal sag, distortion or movement within the hinge arrangement.
► Support the tailgate during disassembly. Worn hardware should never be relied upon to safely support a substantial gate while components are removed.
► Examine mating surfaces together. Replacing a worn pin while retaining a severely worn bush can leave excessive clearance in the assembly.
► Inspect brackets & welds. Cracking around a hinge mount can be more consequential than wear in the replaceable component itself.
► Compare both sides independently. Previous damage, loading & repair work can create substantially different wear patterns across the same tailgate.
► Test repeatedly after assembly. A successful repair should produce consistent movement across multiple operating cycles.

For removal, adjustment & general fitting tasks, Hand Tools provides related workshop equipment.

Mounting hardware also deserves deliberate selection. Why Good Fasteners Matter More Than the Tool You Drive Them With explains why the smaller components within an assembly can materially influence the finished job.

Why Buy From Industrial Shed?

A successful tailgate repair depends on more than finding a replacement component; it depends on understanding how that component interacts with the surrounding assembly.

Industrial Shed brings transport-body hardware together with measuring, drilling, fastening & workshop equipment, allowing repairers to approach the job from inspection through to installation.

Work involving worn steel, fabricated brackets or damaged hardware can also introduce sharp surfaces & workshop hazards. Hand & Arm Protection provides related protection options for appropriate tasks.

Preventive inspection can identify deteriorating hardware before it becomes a loading or access problem. Spring Jobsite Prep Getting Your Gear Ready takes a broader look at preparing working equipment for continued use.

Once the required components have been identified, Same day dispatch provides current shipping & delivery information.

For businesses maintaining multiple vehicles, trailers or workshop assets, on -site & workshop Services provides an additional Industrial Shed support pathway.

Restore the Geometry, Not Just the Hardware

✔ Establish how the tailgate is designed to move
✔ Measure pins, bushes & mounting positions accurately
✔ Compare both sides for evidence of uneven wear
✔ Examine brackets, welds & surrounding structure before replacement
✔ Observe the closing path rather than adjusting the catch by assumption
✔ Validate the completed repair through repeated operating cycles

A reliable tailgate begins with correct geometry. Diagnose the movement, address the worn connection & restore the assembly as a complete mechanical system.

Frequently Asked Questions

What usually causes a tailgate to sag on one side?

Excessive clearance around a pin or bush, loose mounting hardware, distorted brackets, worn hinge components or structural movement can all contribute. Compare both sides of the tailgate before attributing the problem to one component.

How can I distinguish worn bushes from worn pins?

Inspect both mating surfaces for visible wear & excessive clearance then measure the components where appropriate. Replacing only one component may not remove the movement if both surfaces have deteriorated.

Why does my tailgate swing correctly but no longer meet the catch?

The gate's final position may have changed because of hinge wear, mounting movement, body distortion or previous adjustment. Observe the closing path before relocating the catch.

Is a side-swing tailgate system mechanically different from a conventional tailgate?

Yes. A side-swing arrangement changes the gate's axis of movement & consequently requires hardware configured for that movement. Component dimensions & mounting geometry need to suit the specific system.

Should tailgate pins fit tightly inside their bushes?

The correct fit depends on the specific assembly, but obvious excessive movement can indicate wear. Replacement decisions should be based on the applicable component specifications rather than an assumed universal clearance.

Can new tailgate hardware correct a distorted mounting bracket?

Replacement hardware cannot restore damaged structural geometry by itself. Distorted brackets, elongated mounting points or cracked welds should be assessed before new

Brands

► Red Cat | Tail Gate Kits

Purpose-Built Hardware for Trailer, Tipper & Transport Body Repairs

A tailgate that begins to sag, bind or close unevenly is rarely just an inconvenience; it is often evidence of wear somewhere within the supporting hardware. Red Cat Tail Gate Kits cover body-hardware components associated with tailgate assemblies used across suitable trailers, tippers, truck bodies & transport equipment.

Effective repair begins with understanding the assembly rather than replacing the first visibly worn component. Tailgate systems can incorporate hinges, pivots, pins, bushes, catches & related fittings, with the exact arrangement determined by how the gate is designed to move. Identifying that operating geometry, measuring the existing components & inspecting the surrounding structure provides a far more reliable basis for selecting replacement hardware.

Where the repair also involves mounting components, Bolts & Fasteners provides related hardware for suitable installations.

What Are Red Cat Tail Gate Kits?

Red Cat Tail Gate Kits are body-hardware components used within compatible tailgate, trailer & transport-body assemblies.

Rather than viewing a tailgate as a simple hinged panel, it is more useful to consider it as a mechanical system. The gate must pivot around defined points while catches, pins, bushes or other hardware control its movement, retention & closing position.

Different body designs achieve this in different ways.

A conventional trailer tailgate may pivot around a relatively straightforward hinge arrangement. Side-swing configurations introduce a different axis of movement, while tipper bodies can rely on their own hinge, pivot & retaining arrangements to control the gate during unloading.

For that reason, component selection should begin with the operating system rather than the appearance of an individual part.

Similar-looking pins, bushes or catches can differ in diameter, length, mounting geometry or intended function. Accurate identification reduces the likelihood of modifying sound equipment simply to accommodate an unsuitable component.

Why Choose Red Cat Tail Gate Kits?

A sound tailgate body can remain serviceable long after individual moving components begin to wear.

Pins, bushes, catches & pivot hardware are subject to repeated movement. Over time, clearance can increase between mating surfaces, fixing points can loosen & the gate may begin to deviate from its original path.

Replacing the appropriate component can restore function without unnecessarily rebuilding the entire assembly.

Successful repair, however, depends on identifying the source of the movement.

A worn bush can allow a gate to drop. A damaged pin can create excessive play. Distorted mounting steel can alter hinge geometry, while movement at one side of the gate can prevent a perfectly serviceable catch from aligning at the other.

This is why diagnosis should extend beyond the component that appears most obviously damaged.

Where an installation calls for less conventional mounting hardware,  Specialty Fasteners provides another relevant hardware category.

Common Applications

Tipper Bodies

A tipper tailgate depends on controlled geometry throughout its movement.

As the body changes position, the tailgate hardware must continue to perform according to the particular design of the assembly. Hinges, pivots, catches & retaining components can all influence how the gate behaves during transport, opening & discharge.

Before replacing worn hardware, establish how the gate is intended to move & identify which component has allowed that movement to change.

Box & Utility Trailers

Uneven gaps around a trailer tailgate can reveal mechanical wear before a component fails completely.

A gate sitting lower on one side may indicate worn pins or bushes, loose mounting hardware, distorted brackets or deterioration around the hinge points.

Comparing both sides of the assembly can be particularly informative because the less-worn side may provide a useful reference for the original position.

Side-Swing Tailgate Systems

Changing the direction of movement changes the hardware requirements.

A side-swing tailgate uses an arrangement designed to support lateral opening rather than relying solely on a conventional tailgate pivot.

Pin dimensions, bush fit, pivot position & catch alignment therefore need to be considered as part of one assembly.

Accurate  Measuring & Layout Tools can assist when checking mounting centres, component dimensions & existing body geometry.

Truck & Transport Bodies

Frequent loading cycles place repeated demands on commercial body hardware.

Truck & transport applications can expose tailgate assemblies to vibration, contamination & continual opening & closing. Small increases in clearance around pivots can eventually become noticeable as gate movement, rattling or poor catch engagement.

Routine inspection should therefore consider both the moving components & the structure supporting them.

Farm & Property Trailers

Outdoor equipment often accumulates wear gradually rather than failing without warning.

Dust, dirt, moisture & intermittent maintenance can affect pivots, catches & mounting hardware across agricultural & property trailers.

Cleaning the assembly before inspection can make excessive movement, damaged surfaces & deteriorating hardware considerably easier to identify.

Fabrication & Trailer Rebuilds

New fabrication removes the old wear pattern but places greater importance on accurate layout.

Pivot points need to be positioned so the tailgate can travel through its intended arc without binding against the surrounding body.

Establish the geometry, trial the movement & confirm component positions before committing to permanent mounting.

Where confirmed fabrication work requires hole preparation, Drill Bit Sets provides related workshop tooling.

Product Selection Guide

The most reliable way to select tailgate hardware is to diagnose the assembly systematically.

Establish the Tailgate Configuration

Begin with the movement itself.

Determine whether the gate uses a conventional pivot, side-swing arrangement, tipper configuration or another body-specific system.

This provides the mechanical context needed to assess the individual components correctly.

Locate the Source of Excess Movement

A misaligned gate does not automatically require a complete set of replacement hardware.

Inspect for:

► Worn pins
► Excessive bush clearance
► Damaged catches
► Loose mounting hardware
► Distorted hinge components
► Cracked mounting areas
► Uneven gate gaps
► Movement where components should remain rigid

Locating the actual source of clearance helps avoid replacing serviceable components unnecessarily.

Measure Pins, Shafts & Bushes

Mechanical fit depends on dimensions, not visual similarity.

Where applicable, record pin or shaft diameter, bush dimensions, component length & mounting centres.

Taking these measurements before dismantling can also preserve useful information that becomes more difficult to establish once the assembly is apart.

Use the Opposite Side as Evidence

Two sides of the same tailgate can tell very different stories.

If one hinge or pivot has suffered more wear, compare it with the corresponding hardware on the other side. Differences in clearance, orientation or mounting position can help identify how far the assembly has moved from its intended condition.

Where both sides are heavily worn, verified component information becomes increasingly important.

Examine the Supporting Structure

Replacement hardware can only perform as intended when the structure supporting it remains sound.

Inspect mounting plates, brackets, welds & surrounding steel for cracking, distortion, elongated holes or previous modifications.

A new pin installed through an already damaged mounting point may reduce one source of movement while leaving another untouched.

Observe the Final Closing Position

Smooth movement through most of the arc does not guarantee correct closure.

Bring the tailgate gradually towards its operating position & observe how the catch or retaining hardware approaches its mating component.

If the components no longer align naturally, investigate hinge wear, body distortion, loose mounting points & previous repairs before altering the catch position.

For suitable bolted assemblies, Nuts & Washers provides related mounting components.

Determine the Installation Method

Not every piece of transport-body hardware is a straightforward bolt-on replacement.

Depending on the assembly, installation may involve drilling, fabrication, welding or reinforcement. Establish those requirements before beginning the repair so the replacement component can be fitted according to its intended arrangement.

Validate the Repair Through Movement

A static inspection is only part of the final check.

Operate the tailgate throughout its intended range, looking for binding, uncontrolled movement, inconsistent clearance or poor catch engagement.

Where the system supports more than one operating position, check each relevant configuration before the equipment returns to service.

Expert Tips

Wear patterns are effectively a mechanical record of how the tailgate has been moving. Read them before removing the evidence.

► Clean the pivot area first. Dirt & accumulated debris can conceal wear around pins, bushes & mounting points.
► Photograph the intact assembly. Images provide a useful reference for component orientation, washers, spacers & retaining hardware.
► Measure before modification. Grinding or drilling should follow confirmed fitment rather than compensate for an incorrectly selected component.
► Inspect holes for elongation. An oval mounting point around a round pin indicates movement that deserves further investigation.
► Compare the gate gaps. Uneven spacing can help reveal sag, distortion or movement within the hinge arrangement.
► Support the tailgate during disassembly. Worn hardware should never be relied upon to safely support a substantial gate while components are removed.
► Examine mating surfaces together. Replacing a worn pin while retaining a severely worn bush can leave excessive clearance in the assembly.
► Inspect brackets & welds. Cracking around a hinge mount can be more consequential than wear in the replaceable component itself.
► Compare both sides independently. Previous damage, loading & repair work can create substantially different wear patterns across the same tailgate.
► Test repeatedly after assembly. A successful repair should produce consistent movement across multiple operating cycles.

For removal, adjustment & general fitting tasks, Hand Tools provides related workshop equipment.

Mounting hardware also deserves deliberate selection. Why Good Fasteners Matter More Than the Tool You Drive Them With explains why the smaller components within an assembly can materially influence the finished job.