Ratchet Straps & Tie Downs for Secure Transport

Ratchet straps and tie-downs are used to secure equipment, materials and cargo for transport on trailers, utes, racks and work vehicles. This collection is deliberately separate from lifting equipment: tie-downs control cargo movement during transport and are not designed for overhead lifting unless a product explicitly states otherwise.

Select the right tie-down system

• Lashing capacity: choose products by their marked lashing capacity and the load-restraint plan, not only strap width or colour.
• Length and routing: allow enough strap length for a suitable route without loose excess, twists or sharp unprotected contact points.
• End fittings: confirm that hooks, buckles and anchor points are compatible with the vehicle or trailer.
• Load type: consider mass, shape, movement risk and the number of restraints required for the journey.

Shop connected restraint categories

For chain restraint, browse load binders and load restraint. Add weather or loose-load protection from tarps & cargo nets. For lifting-chain and rigging hardware, see lifting chain, wire rope & fittings; do not substitute that equipment for vehicle restraint without confirming the specified application.

Inspection and handling

Before every use, inspect webbing for cuts, abrasion, melted fibres or chemical damage; inspect ratchets, hooks and stitching for deformation or corrosion. Keep straps away from sharp edges or use approved edge protection. Release tension carefully and store straps clean and dry when not in use.

Ratchet Straps & Tie Downs FAQs

What does lashing capacity mean?

Lashing capacity is the marked capacity used when planning a restraint system. Check the label, product documentation and applicable transport requirements for the arrangement.

Can I use a ratchet strap to lift an engine or machine?

No. Use purpose-rated lifting slings and hardware for lifting. Ratchet straps are intended for restraint unless the manufacturer specifically states otherwise.

How often should ratchet straps be replaced?

Remove a strap from service if its webbing, ratchet, hook, stitching or label is damaged or unreadable. Regular inspection is essential because contamination and abrasion can reduce performance.

Industrial Shed support

Industrial Shed supplies restraint and transport hardware for trades, fleet operators, rural work and projects Australia-wide. Contact our team for help comparing strap lengths, end fittings and complementary restraint components.