Fast Pre-Looped Tying for Reo & Reinforcing Work

Rally | Rod Ties are 1.5mm black annealed pre-looped wire ties for tying reinforcing steel & compatible general construction applications, available in 110mm to 300mm lengths. Buyers can choose convenient 200-piece pre-packs in selected sizes or 2000-piece coils across the broader range, with a dedicated rod tying tool available for twisting the pre-formed loops.

Repetitive reinforcement tying becomes easier to plan when tie length, quantity & tool compatibility are considered together. Shorter ties suit more compact arrangements, while longer options provide additional reach where the material being captured requires it.

For adjacent reinforcement requirements, explore Concrete Reinforcement. Related construction fastening requirements can also be sourced through Bolts & Fasteners.

What Are Rally | Rod Ties?

Pre-looped wire ties provide a ready-to-use format for repetitive tying work. Each Rally rod tie is made from 1.5mm black annealed wire with a loop formed at both ends so a compatible rod tying tool can engage the loops & twist the tie around suitable reinforcement or other materials.

Trade terminology can vary between jobsites & suppliers. Products of this type may also be described as loop ties, double loop ties, bag ties, rebar ties, reo ties or reinforcing ties.

One distinction matters immediately: these products are not threaded formwork tie rods. Rally | Rod Ties are small pre-looped wire ties for reinforcement & compatible general tying applications rather than components used to restrain opposing formwork faces.

Why Choose Rally | Rod Ties?

Hundreds of reinforcement intersections can make small differences in tie preparation add up across a job. Pre-formed loops give the tying tool defined engagement points without requiring each individual tie to be cut from loose wire before use.

1.5mm Black Annealed Wire

A consistent wire diameter runs across the verified Rally range. Each rod tie uses 1.5mm black annealed wire, with the available length changing to suit different tying arrangements.

Six Available Lengths

Different reinforcement arrangements need different amounts of wire around the intersection. Available lengths include:

► 110mm x 1.5mm
► 125mm x 1.5mm
► 150mm x 1.5mm
► 200mm x 1.5mm
► 250mm x 1.5mm
► 300mm x 1.5mm

The range allows buyers to increase tie length where larger arrangements require additional reach rather than forcing one size across every task.

Pre-Looped Ends

Loops at both ends create the connection point for the tying tool. Once both loops are captured, the tool twists them together to draw the wire around the compatible material being tied.

200 & 2000-Piece Options

Job quantity can be matched more closely to the amount of tying expected. The 110mm, 125mm & 150mm sizes are available in 200-piece pre-packs, while 2000-piece coils cover lengths from 110mm through to 300mm.

Common Applications

Reinforcement preparation is the primary application for this type of pre-looped tie, but the same format can suit other compatible tying tasks.

Applications can include:

► Tying reinforcing steel
► Securing compatible reo intersections
► Reinforcement preparation before concrete placement
► Compatible reinforcement mesh tying
► General construction tying
► General-purpose tying where pre-looped black annealed wire is suitable
► Bag closing where this tie format suits the task

Project drawings, reinforcement details & site requirements should determine how reinforcement is positioned & secured where those requirements are specified.

Product Selection Guide

Length & pack quantity are the two quickest ways to narrow the range. The tie needs enough reach around the materials for both loops to be engaged correctly, while pack size should reflect the volume of tying expected.

How to Choose the Right Rod Tie Length?

The reinforcement arrangement determines how much tie length is needed. Bar diameter, the number of bars or wires being captured & the shape of the intersection can all change the distance the tie needs to travel.

Before ordering:

► Identify the materials being tied
► Check the complete distance around the intersection
► Allow both loops to come together for tool engagement
► Trial the intended length where arrangements vary
► Move to a longer tie where the shorter option can't engage correctly

Excessive length isn't automatically an advantage. Extra wire can leave more material to twist & manage, so select around the actual arrangement rather than assuming the longest tie is best.

200-Piece Pre-Pack or 2000-Piece Coil?

Pack quantity should follow the scale & frequency of the work.

200-Piece Pre-Packs

Smaller quantities can make sense where tying requirements are limited or several lengths need to be kept available. The 110mm, 125mm & 150mm sizes are available in 200-piece pre-packs.

These can suit:

► Smaller concrete jobs
► Maintenance work
► Occasional reinforcement tying
► Carrying multiple tie lengths
► Jobs that don't require bulk quantities

2000-Piece Coils

Repeated tying across larger reinforcement work can quickly increase tie consumption. Bulk 2000-piece coils are available in 110mm, 125mm, 150mm, 200mm, 250mm & 300mm lengths.

Planning likely usage before work starts can reduce interruptions caused by running short part-way through reinforcement preparation.

Rod Ties vs Loose Tie Wire

Both formats can be used around reinforcement work, but they aren't presented or handled in the same way.

Rod ties come in predetermined lengths with pre-formed loops at both ends. A compatible tying tool catches those loops & twists the tie closed.

Loose tie wire is supplied in a different format & can involve different cutting, tying methods, tools & tie patterns.

Project requirements & established site practice should guide the appropriate tying method rather than assuming one format can always substitute for another.

Rod Ties vs Formwork Tie Rods

Similar names can describe products with completely different functions.

Rally | Rod Ties in this collection are 1.5mm black annealed pre-looped wire ties for reinforcement & compatible general tying.

Formwork tie rods are components used within concrete formwork systems to help restrain opposing formwork faces during concrete placement.

A pre-looped rod tie isn't a substitute for a formwork tie rod & a formwork tie rod isn't the product used by the Rally rod tying tool.

Using the Rod Tying Tool

The tying tool converts the two pre-formed loops into a twisted closure around the compatible materials. Position the selected tie around the reinforcement, bring the loops together & engage both loops with the tool.

Operate the tool so its twisting action draws the tie together.

Before moving on:

► Check both loops were captured
► Confirm the wire surrounds the intended materials
► Avoid unnecessary overtightening
► Keep hands clear of sharp wire ends
► Inspect the tool if its twisting action becomes irregular

A completed tie should never be used as a reason to ignore specified reinforcement placement, bar spacing, laps, cover or other project requirements.

Reinforcement Tying Is Only One Part of the Setup

Holding bars in position doesn't determine where the reinforcement belongs. Reinforcement size, spacing, laps, cover, chairs, mesh position & other construction details need to follow the applicable project documentation.

Rod ties help hold compatible reinforcement arrangements during preparation. They shouldn't be treated as a substitute for engineering details or specified reinforcement procedures.

For reinforcement products used alongside tying work, Concrete Reinforcement provides a useful next step through the broader concrete setup.

Expert Tips

Compare the Intersection Before Choosing Length

A tie that works neatly around one arrangement may be too short around another. Check the bars, mesh or compatible materials being captured before committing to bulk quantities.

Keep Useful Lengths Within Reach

Changing reinforcement details can alter the amount of wire required. Carrying more than one appropriate length can help where a job moves between different tying arrangements.

Engage Both Loops Properly

The tool works through the pre-formed loops rather than directly gripping the wire body. Capture both loops correctly before operating the tying action.

Watch for Sharp Wire

Small wire ends can still cut or catch. Handle ties appropriately, keep discarded pieces under control & use suitable PPE for the work being performed.

Avoid Unnecessary Overtightening

More twisting isn't automatically better. Complete the tie appropriately for the task without continuing to twist until the wire is unnecessarily stressed.

Check Project Requirements

The tie holds compatible reinforcement in position but doesn't establish the reinforcement design. Follow applicable drawings, specifications & site requirements for reinforcement placement.

Estimate Quantity Before Work Starts

A box of ties disappears quickly when every intersection needs attention. Estimate likely tie usage across the reinforcement layout & allow for different tie lengths where the job requires them.

For practical reading around concreting equipment, OX Tools Spotlight: Australian Concreters Switching provides additional context for Australian concreting work.