► Rally | Pier Supports

Galvanised Steel Support for Posts & Building Projects Getting the post dimensions right before ordering can prevent a frustrating compatibility problem on site. Rally Adjustable Pier Supports are galvanised steel pier supports designed for compatible steel posts, with adjustable L-shape, U-shape & base-plate configurations for builders, fabricators, contractors & construction...

Galvanised Steel Support for Posts & Building Projects

Getting the post dimensions right before ordering can prevent a frustrating compatibility problem on site. Rally Adjustable Pier Supports are galvanised steel pier supports designed for compatible steel posts, with adjustable L-shape, U-shape & base-plate configurations for builders, fabricators, contractors & construction crews across Australia.

Accurate installation starts before the post reaches its final position.  Measuring & Layout Tools can assist with dimensions, levels & set-out, while Metal Cutting & Grinding Tools support compatible steel preparation & fabrication tasks where permitted by the project requirements.

The Rally range includes an Adjustable L-Shape Pier/Post Support, Adjustable U-Shape Pier/Post Support & Pier/Post Support Base Plate. These components may also be described as adjustable post supports, steel pier supports, pier post supports or adjustable pier heads, depending on the connection style & trade terminology being used.

What Are Rally Pier Supports?

Post shape is the quickest way to begin narrowing down the correct support.

Rally Pier Supports are galvanised steel components designed to connect with compatible posts. Rally provides adjustable L-shape & U-shape supports alongside a dedicated support base plate, with documented dimensions to help identify compatible post profiles.

You may also see this type of building hardware described as:

► Adjustable pier supports
► Adjustable pier heads
► Pier post supports
► Post supports
► Adjustable post supports
► Galvanised post supports
► Steel pier supports
► Pier post brackets
► Post support brackets
► Pier support brackets
► Post base supports

Names alone don't establish compatibility. Products described as pier supports, steel post supports or adjustable pier heads can vary considerably in shape, dimensions & connection method, making the actual post measurements an important part of selection.

Why Choose Rally Pier Supports?

A support that misses the post dimensions by a few millimetres can bring installation to a stop.

Rally provides three distinct configurations, allowing the connection to be selected around the profile & dimensions of the compatible post rather than treating every steel pier support as interchangeable.

The range provides:

► Galvanised steel construction
► Adjustable L-shape support
► Adjustable U-shape support
► Dedicated support base plate
► Options for compatible round & rectangular post profiles
► Documented fitting dimensions
► Purpose-made post support components

Adjustment provides useful installation flexibility within the intended connection arrangement. Loads, footing details, post specifications, connection requirements & installation methods still need to follow the applicable plans, engineering details & project requirements.

Product Selection Guide

Three Rally configurations become much easier to compare when the post is used as the starting point.

Rally Adjustable L-Shape Pier/Post Support

Working with a compatible round post? The L-shape support is the first Rally configuration worth checking.

Rally states that the BSSPA Adjustable Support L-Shape fits inside 90mm diameter posts with an internal measurement of 83mm or less.

Documented dimensions include:

► Product code BSSPA
► Galvanised steel construction
► Adjustable configuration
► L-shaped support
► 90mm base of L plate
► 80mm raised L plate
► 85mm width
► Designed around compatible 90mm diameter posts
► Maximum documented internal post measurement of 83mm

Outside diameter only tells part of the story. Wall thickness affects the available space inside a hollow post, so confirm the actual internal measurement before ordering.

Rally Adjustable U-Shape Pier/Post Support

Rectangular post sections require a different connection geometry from round posts.

Rally's BSSPAU Adjustable Support U-Shape is documented for a 95mm x 50mm post with an internal measurement of 95mm x 54mm or less.

The documented configuration includes:

► Product code BSSPAU
► Galvanised steel construction
► Adjustable design
► U-shaped support
► 80mm U-plate height
► 95mm U-plate width
► Intended for compatible 95mm x 50mm post applications

Both dimensions deserve checking before the support is ordered. Confirming only the width of a rectangular section can overlook a mismatch elsewhere in the connection.

Rally Pier/Post Support Base Plate

Square hollow steel calls for another approach within the Rally range.

Rally identifies the BSSPBP Pier/Post Support Base Plate as ideally suited to 90mm x 90mm x 2mm hollow steel post.

Documented details include:

► Product code BSSPBP
► Galvanised steel construction
► Intended around compatible 90mm x 90mm x 2mm hollow steel post
► Raised-plate external width of 81mm
► Raised-plate external depth of 81mm
► Raised-plate height of 30mm
► Post slides over the raised plates
► Rally specifies securing with tech screws

Fastener access should be considered before the post is finally positioned. Where compatible drilling equipment is required for associated installation work, Drills provides practical options for site & workshop use.

L-Shape vs U-Shape vs Base Plate Pier Supports

Put the post profile beside the support configuration & the differences become much clearer.

Rally Pier Support

Configuration

Documented Post Fit

BSSPA

Adjustable L-Shape

90mm diameter post, internal measurement 83mm or less

BSSPAU

Adjustable U-Shape

Compatible 95mm x 50mm post, internal measurement 95mm x 54mm or less

BSSPBP

Support Base Plate

Ideally suited to 90mm x 90mm x 2mm hollow steel post

Appearance isn't enough to confirm the connection. Match the product code, support geometry, post profile, actual dimensions & project detail before installation.

A quick measurement in the workshop can prevent an incompatible adjustable post support from reaching the jobsite.

Common Applications

Pier-supported construction can involve very different connection details from one project to another.

Compatible Rally Pier Supports may form part of post-supported building work where their dimensions & configuration correspond with the specified construction detail.

Potential project contexts include:

► Post-supported construction
► Compatible steel-post installations
► Deck structures where specified
► Verandah construction where specified
► Outdoor structures
► Raised building elements
► General building projects using supported posts

Application type shouldn't be used as the sole selection method. Two outdoor structures can have completely different post dimensions, footing arrangements, connection requirements & structural demands.

The approved project documentation should establish whether a particular Rally adjustable pier support is appropriate for the connection.

Measure The Post Before Ordering

A tape across the outside of a hollow section may not tell you whether the support will actually fit inside it.

Wall thickness changes the available internal dimensions. This becomes particularly important with supports designed to fit within or interface closely with hollow steel posts.

Confirm:

► Post profile
► Outside dimensions
► Internal dimensions
► Wall thickness
► Required connection style
► Rally product code
► Project support detail
► Applicable fastening method

For finer dimensional checks during fabrication, Calipers (Digital / Manual) can help verify compatible component measurements where appropriate.

Existing, fabricated or previously installed steel deserves an individual measurement rather than an assumption. Sections that appear identical at a glance may not provide the same internal clearance.

Adjustable Pier Heads & Finished Levels

Adjustment is most useful when it helps achieve accurate installation within the specified arrangement.

An adjustable pier head can provide installation flexibility, but that adjustment shouldn't be treated as permission to change the structural design or create an unsupported connection.

Before finalising the position, review the applicable:

► Engineering details
► Post specification
► Support configuration
► Footing arrangement
► Finished level
► Connection method
► Fastener requirements
► Installation procedure

Set levels from the correct project reference. Copying the height of a neighbouring post can allow small errors to accumulate across several supports.

Structural Connections Need More Than A Dimensional Match

A bracket fitting inside the post doesn't prove that the complete assembly is suitable for the building load.

Post size, support geometry, footing arrangement, fasteners & the surrounding structure all contribute to the complete connection.

Where Rally Pier Supports form part of a load-bearing building system, follow the approved project documentation & obtain appropriate professional guidance where required.

Load figures from another manufacturer's adjustable pier system shouldn't be transferred to Rally components. Use information applicable to the actual Rally product & project.

For crews preparing materials, tools & equipment before demanding site work, Spring Jobsite Prep Getting Your Gear Ready provides further practical preparation guidance.

Galvanised Steel & Exposure

Outdoor steel connections face conditions that can be very different from components protected inside a dry building.

Rally describes the pier support range as galvanised steel. The galvanised finish provides a protective coating for the steel component, while overall durability still depends on the environment & project requirements.

Consider:

► Moisture exposure
► Coastal conditions
► Drainage
► Contact with surrounding materials
► Damage to protective coatings
► Site environment
► Project durability requirements

Galvanised steel isn't a universal answer for every exposure condition. Confirm the required material & protective finish against the project specification where the environment is particularly demanding.

Prepare The Connection Before Final Assembly

Discovering an incompatible post after cutting, positioning or transporting it creates work that a simple fit check could have prevented.

A useful pre-installation check can cover:

► Rally product code
► Post dimensions
► Support orientation
► Finished level
► Required fastening method
► Condition of the galvanised finish
► Project connection detail
► Access for installation equipment

Don't grind, bend, drill or otherwise alter a structural support merely to force an incompatible connection. Changes affecting a specified structural component should be addressed through the appropriate project requirements.

Where associated fasteners need to be tightened during compatible installation work,  Spanner & Wrench Sets provide another useful workshop or site equipment option.

Expert Tips

Measure one representative post before purchasing multiple supports. Confirming the fit early can prevent a repeated compatibility problem across the project.

Keep BSSPA, BSSPAU & BSSPBP clearly identified. Similar product names can hide important differences in support geometry.

Check hollow sections internally. Wall thickness can make nominal outside dimensions misleading when an insert-style connection is involved.

Dry-fit compatible components where practical. Workshop checks are usually easier than solving fit problems after materials reach site.

Protect the galvanised finish during transport & installation. Avoid unnecessary coating damage while handling the components.

Reference the specified finished level throughout installation. Independent checks reduce the chance of small height errors carrying across multiple supports.

Stop when the documented support doesn't match the post. Confirm the correct component or project solution instead of modifying the connection by assumption.

For a broader trade perspective on dependable equipment & materials, A tool is not just a tool. It’s a promise. looks at why the equipment behind a job matters beyond the initial purchase.

Why Buy From Industrial Shed?

Post supports become a procurement problem when fabrication is ready but the connection hardware isn't. Industrial Shed is a B2B supplier supporting Australian builders, fabricators, contractors, maintenance teams & commercial buyers with Rally building products, tools & industrial equipment.

Businesses managing repeat project purchases can review Application for Credit Account when account purchasing better suits their procurement process.

Questions about Rally L-shape, U-shape or base-plate configurations can be directed through Contact Us before ordering.

For trade buyers comparing purchase price with dependable supply, The Hidden Cost of 'I Can Get It Cheaper Online provides further reading.

Measure The Post Before The Support Reaches Site

Match the Rally Pier Support to the actual post profile, confirm the internal dimensions & follow the specified connection detail before installation.

✔ Adjustable L-shape pier/post support
✔ Adjustable U-shape pier/post support
✔ Dedicated post support base plate
✔ Galvanised steel construction
✔ Documented post-fit dimensions
✔ Australian B2B supply for builders, fabricators & commercial buyers

One accurate measurement before ordering can prevent an incompatible connection on site.

Frequently Asked Questions

What is the difference between an adjustable pier support & an adjustable pier head?

The terms can overlap in Australian building supply language. Rally describes these products as adjustable pier/post supports, while similar L-shape or U-shape components may also be referred to as adjustable pier heads. Dimensions & configuration are more important than terminology alone.

How do I know whether the Rally L-shape support will fit my round post?

Check the internal measurement as well as the outside diameter. Rally documents the BSSPA for 90mm diameter posts with an internal measurement of 83mm or less.

Which Rally Pier Support is intended for rectangular posts?

Rally documents the BSSPAU U-Shape Support around a compatible 95mm x 50mm post. The stated internal measurement is 95mm x 54mm or less.

What Rally support is intended for 90mm x 90mm hollow steel post?

Rally identifies the BSSPBP Support Base Plate as ideally suited to 90mm x 90mm x 2mm hollow steel post. The post slides over raised plates measuring 81mm x 81mm externally.

Does an adjustable pier support remove the need to measure the post accurately?

No. Adjustment relates to the support arrangement, while physical compatibility still depends on the post profile & dimensions.

Can Rally Pier Supports be used near the coast?

Rally describes these supports as galvanised steel, but coastal exposure can create demanding corrosion conditions. Confirm the required material, coating & durability requirements for the specific project environment.

Brands

► Rally | Pier Supports

Galvanised Steel Support for Posts & Building Projects

Getting the post dimensions right before ordering can prevent a frustrating compatibility problem on site. Rally Adjustable Pier Supports are galvanised steel pier supports designed for compatible steel posts, with adjustable L-shape, U-shape & base-plate configurations for builders, fabricators, contractors & construction crews across Australia.

Accurate installation starts before the post reaches its final position.  Measuring & Layout Tools can assist with dimensions, levels & set-out, while Metal Cutting & Grinding Tools support compatible steel preparation & fabrication tasks where permitted by the project requirements.

The Rally range includes an Adjustable L-Shape Pier/Post Support, Adjustable U-Shape Pier/Post Support & Pier/Post Support Base Plate. These components may also be described as adjustable post supports, steel pier supports, pier post supports or adjustable pier heads, depending on the connection style & trade terminology being used.

What Are Rally Pier Supports?

Post shape is the quickest way to begin narrowing down the correct support.

Rally Pier Supports are galvanised steel components designed to connect with compatible posts. Rally provides adjustable L-shape & U-shape supports alongside a dedicated support base plate, with documented dimensions to help identify compatible post profiles.

You may also see this type of building hardware described as:

► Adjustable pier supports
► Adjustable pier heads
► Pier post supports
► Post supports
► Adjustable post supports
► Galvanised post supports
► Steel pier supports
► Pier post brackets
► Post support brackets
► Pier support brackets
► Post base supports

Names alone don't establish compatibility. Products described as pier supports, steel post supports or adjustable pier heads can vary considerably in shape, dimensions & connection method, making the actual post measurements an important part of selection.

Why Choose Rally Pier Supports?

A support that misses the post dimensions by a few millimetres can bring installation to a stop.

Rally provides three distinct configurations, allowing the connection to be selected around the profile & dimensions of the compatible post rather than treating every steel pier support as interchangeable.

The range provides:

► Galvanised steel construction
► Adjustable L-shape support
► Adjustable U-shape support
► Dedicated support base plate
► Options for compatible round & rectangular post profiles
► Documented fitting dimensions
► Purpose-made post support components

Adjustment provides useful installation flexibility within the intended connection arrangement. Loads, footing details, post specifications, connection requirements & installation methods still need to follow the applicable plans, engineering details & project requirements.

Product Selection Guide

Three Rally configurations become much easier to compare when the post is used as the starting point.

Rally Adjustable L-Shape Pier/Post Support

Working with a compatible round post? The L-shape support is the first Rally configuration worth checking.

Rally states that the BSSPA Adjustable Support L-Shape fits inside 90mm diameter posts with an internal measurement of 83mm or less.

Documented dimensions include:

► Product code BSSPA
► Galvanised steel construction
► Adjustable configuration
► L-shaped support
► 90mm base of L plate
► 80mm raised L plate
► 85mm width
► Designed around compatible 90mm diameter posts
► Maximum documented internal post measurement of 83mm

Outside diameter only tells part of the story. Wall thickness affects the available space inside a hollow post, so confirm the actual internal measurement before ordering.

Rally Adjustable U-Shape Pier/Post Support

Rectangular post sections require a different connection geometry from round posts.

Rally's BSSPAU Adjustable Support U-Shape is documented for a 95mm x 50mm post with an internal measurement of 95mm x 54mm or less.

The documented configuration includes:

► Product code BSSPAU
► Galvanised steel construction
► Adjustable design
► U-shaped support
► 80mm U-plate height
► 95mm U-plate width
► Intended for compatible 95mm x 50mm post applications

Both dimensions deserve checking before the support is ordered. Confirming only the width of a rectangular section can overlook a mismatch elsewhere in the connection.

Rally Pier/Post Support Base Plate

Square hollow steel calls for another approach within the Rally range.

Rally identifies the BSSPBP Pier/Post Support Base Plate as ideally suited to 90mm x 90mm x 2mm hollow steel post.

Documented details include:

► Product code BSSPBP
► Galvanised steel construction
► Intended around compatible 90mm x 90mm x 2mm hollow steel post
► Raised-plate external width of 81mm
► Raised-plate external depth of 81mm
► Raised-plate height of 30mm
► Post slides over the raised plates
► Rally specifies securing with tech screws

Fastener access should be considered before the post is finally positioned. Where compatible drilling equipment is required for associated installation work, Drills provides practical options for site & workshop use.

L-Shape vs U-Shape vs Base Plate Pier Supports

Put the post profile beside the support configuration & the differences become much clearer.

Rally Pier Support

Configuration

Documented Post Fit

BSSPA

Adjustable L-Shape

90mm diameter post, internal measurement 83mm or less

BSSPAU

Adjustable U-Shape

Compatible 95mm x 50mm post, internal measurement 95mm x 54mm or less

BSSPBP

Support Base Plate

Ideally suited to 90mm x 90mm x 2mm hollow steel post

Appearance isn't enough to confirm the connection. Match the product code, support geometry, post profile, actual dimensions & project detail before installation.

A quick measurement in the workshop can prevent an incompatible adjustable post support from reaching the jobsite.

Common Applications

Pier-supported construction can involve very different connection details from one project to another.

Compatible Rally Pier Supports may form part of post-supported building work where their dimensions & configuration correspond with the specified construction detail.

Potential project contexts include:

► Post-supported construction
► Compatible steel-post installations
► Deck structures where specified
► Verandah construction where specified
► Outdoor structures
► Raised building elements
► General building projects using supported posts

Application type shouldn't be used as the sole selection method. Two outdoor structures can have completely different post dimensions, footing arrangements, connection requirements & structural demands.

The approved project documentation should establish whether a particular Rally adjustable pier support is appropriate for the connection.

Measure The Post Before Ordering

A tape across the outside of a hollow section may not tell you whether the support will actually fit inside it.

Wall thickness changes the available internal dimensions. This becomes particularly important with supports designed to fit within or interface closely with hollow steel posts.

Confirm:

► Post profile
► Outside dimensions
► Internal dimensions
► Wall thickness
► Required connection style
► Rally product code
► Project support detail
► Applicable fastening method

For finer dimensional checks during fabrication, Calipers (Digital / Manual) can help verify compatible component measurements where appropriate.

Existing, fabricated or previously installed steel deserves an individual measurement rather than an assumption. Sections that appear identical at a glance may not provide the same internal clearance.

Adjustable Pier Heads & Finished Levels

Adjustment is most useful when it helps achieve accurate installation within the specified arrangement.

An adjustable pier head can provide installation flexibility, but that adjustment shouldn't be treated as permission to change the structural design or create an unsupported connection.

Before finalising the position, review the applicable:

► Engineering details
► Post specification
► Support configuration
► Footing arrangement
► Finished level
► Connection method
► Fastener requirements
► Installation procedure

Set levels from the correct project reference. Copying the height of a neighbouring post can allow small errors to accumulate across several supports.

Structural Connections Need More Than A Dimensional Match

A bracket fitting inside the post doesn't prove that the complete assembly is suitable for the building load.

Post size, support geometry, footing arrangement, fasteners & the surrounding structure all contribute to the complete connection.

Where Rally Pier Supports form part of a load-bearing building system, follow the approved project documentation & obtain appropriate professional guidance where required.

Load figures from another manufacturer's adjustable pier system shouldn't be transferred to Rally components. Use information applicable to the actual Rally product & project.

For crews preparing materials, tools & equipment before demanding site work, Spring Jobsite Prep Getting Your Gear Ready provides further practical preparation guidance.

Galvanised Steel & Exposure

Outdoor steel connections face conditions that can be very different from components protected inside a dry building.

Rally describes the pier support range as galvanised steel. The galvanised finish provides a protective coating for the steel component, while overall durability still depends on the environment & project requirements.

Consider:

► Moisture exposure
► Coastal conditions
► Drainage
► Contact with surrounding materials
► Damage to protective coatings
► Site environment
► Project durability requirements

Galvanised steel isn't a universal answer for every exposure condition. Confirm the required material & protective finish against the project specification where the environment is particularly demanding.

Prepare The Connection Before Final Assembly

Discovering an incompatible post after cutting, positioning or transporting it creates work that a simple fit check could have prevented.

A useful pre-installation check can cover:

► Rally product code
► Post dimensions
► Support orientation
► Finished level
► Required fastening method
► Condition of the galvanised finish
► Project connection detail
► Access for installation equipment

Don't grind, bend, drill or otherwise alter a structural support merely to force an incompatible connection. Changes affecting a specified structural component should be addressed through the appropriate project requirements.

Where associated fasteners need to be tightened during compatible installation work,  Spanner & Wrench Sets provide another useful workshop or site equipment option.

Expert Tips

Measure one representative post before purchasing multiple supports. Confirming the fit early can prevent a repeated compatibility problem across the project.

Keep BSSPA, BSSPAU & BSSPBP clearly identified. Similar product names can hide important differences in support geometry.

Check hollow sections internally. Wall thickness can make nominal outside dimensions misleading when an insert-style connection is involved.

Dry-fit compatible components where practical. Workshop checks are usually easier than solving fit problems after materials reach site.

Protect the galvanised finish during transport & installation. Avoid unnecessary coating damage while handling the components.

Reference the specified finished level throughout installation. Independent checks reduce the chance of small height errors carrying across multiple supports.

Stop when the documented support doesn't match the post. Confirm the correct component or project solution instead of modifying the connection by assumption.

For a broader trade perspective on dependable equipment & materials, A tool is not just a tool. It’s a promise. looks at why the equipment behind a job matters beyond the initial purchase.