► Precision Specialty Tools | Nozzles

Targeted Coolant Delivery for Precision Machining  Your coolant pump may be operating correctly while the cutting area still receives poorly directed fluid. The cause could be an unsuitable outlet diameter, an incorrectly positioned arm or a connection that doesn't match the machine. NOGA coolant nozzles give machining workshops defined outlet...

Targeted Coolant Delivery for Precision Machining 

Your coolant pump may be operating correctly while the cutting area still receives poorly directed fluid. The cause could be an unsuitable outlet diameter, an incorrectly positioned arm or a connection that doesn't match the machine. NOGA coolant nozzles give machining workshops defined outlet options for directing compatible cutting fluid towards the intended work area.

Unlike general-purpose air nozzles, this collection focuses on NOGA coolant-arm components. The listed range includes 2mm, 4mm & 6mm outlet nozzles with 1/4 NPT connections, alongside fixed & variable high-pressure coolant arms.

Selecting the right component begins with the installed system rather than the nozzle's appearance. For related machine-tool equipment, explore Precision Specialty Tools Holders, Metal Cutting & Grinding Tools & Countersinks & Accessories.

Why Coolant Nozzle Selection Matters?

A larger outlet isn't automatically better, just as a smaller outlet doesn't guarantee improved cutting performance.

Coolant delivery depends on the machine's pressure, flow capacity, fluid properties, nozzle geometry & position. Changing one component can affect the behaviour of the wider system.

An unsuitable nozzle may also create clearance problems inside the machine enclosure. Buyers should therefore consider both fluid delivery requirements & physical installation.

Comparing 2mm, 4mm & 6mm NOGA Coolant Nozzles

The collection provides three clearly identified outlet sizes.

NOGA CA1002 – 2mm Outlet

The NOGA CA1002 coolant nozzle is listed with a 2mm outlet & 1/4 NPT connection.

A smaller opening changes the outlet geometry, but actual delivery depends on the complete coolant system.

NOGA CA1004 – 4mm Outlet

The NOGA CA1004 coolant nozzle provides a 4mm outlet for a compatible NOGA arm.

This may be the appropriate replacement where the existing machine configuration specifies that size.

NOGA CA1006 – 6mm Outlet

The NOGA CA1006 coolant nozzle is listed with a 6mm outlet.

A larger opening should only be selected when the machine's delivery requirements support it.

Which Size Should You Choose?

Start with the existing approved configuration. If a different diameter is being considered, confirm the machine manufacturer's pressure, flow & application requirements first.

Understanding 1/4 NPT Coolant Connections

A nozzle that looks approximately the right size may still have the wrong thread.

What Is NPT?

NPT is a tapered pipe-thread standard. Its geometry differs from certain parallel-thread connections.

Why Compatibility Matters?

Incorrect thread engagement can damage fittings or create leaks. Never force a component into an incompatible port.

Checking the Existing Arm

Identify the installed thread specification before ordering. Compare it with the nozzle's listed connection.

Sealing Requirements

Follow the equipment manufacturer's approved sealing method. Unverified adaptors or improvised arrangements should be avoided.

NOGA CA2000 vs CA3000 Coolant Arms

The collection includes two different complete-arm configurations.

NOGA CA2000 Fixed Coolant Arm

The NOGA CA2000 fixed high-pressure coolant arm is listed at 164mm with a 1/4 NPT connection & 4mm nozzle.

A fixed arrangement may suit a machine requiring a consistent outlet position.

NOGA CA3000 Variable Coolant Arm

The NOGA CA3000 variable high-pressure coolant arm is listed at 238mm with a 1/4 NPT connection & 4mm nozzle.

Its variable configuration may be useful where the outlet needs a different approved positioning arrangement.

Comparing Arm Lengths

The listed 164mm & 238mm dimensions help buyers assess physical fitment. Check the complete operating envelope rather than relying on length alone.

Fixed or Variable?

Choose according to the machine layout, required outlet position & manufacturer's instructions. Neither configuration is automatically better for every application.

Coolant Direction for Different Machining Operations

The intended cutting process affects how fluid delivery should be planned.

Milling

The contact region changes as the tool moves across the workpiece. Nozzle position should suit the machine's approved cutting arrangement.

Drilling

Hole depth, chip evacuation & tool design can influence coolant requirements. Follow the cutting-tool manufacturer's guidance.

Turning

The cutting area may be relatively localised, but toolholder clearance & machine movement remain important.

Hole Finishing

Some finishing operations have different coolant requirements from heavy roughing. Select the arrangement appropriate to the process.

Choosing a Replacement Coolant Nozzle

A replacement order should answer five questions.

What Is the Existing Part Number?

Record the current nozzle reference before removing it. CA1002, CA1004 & CA1006 identify different outlet sizes.

Which Thread Is Installed?

Confirm the connection specification. A visually similar fitting may not be compatible.

What Pressure Does the Machine Use?

Verify the system's operating conditions. Don't infer a component's pressure rating solely from a high-pressure product description.

Which Fluid Is Being Delivered?

Check material & fluid compatibility according to the manufacturer's specifications.

Is There Enough Clearance?

Confirm that the arm & nozzle remain clear of moving machine components throughout the approved operating range.

Common Coolant Delivery Problems

Poor Nozzle Positioning

Fluid directed away from the intended area may not achieve the required delivery. Check the approved positioning arrangement.

Incorrect Outlet Diameter

Changing nozzle size can alter flow characteristics. Match the replacement to the machine's requirements.

Thread Mismatch

An incompatible fitting may leak or damage the connection. Verify the thread standard before installation.

Restricted Machine Clearance

A nozzle can appear to fit while the machine is stationary yet interfere during movement. Check the complete working envelope.

Damaged Fittings

Worn threads or cracked components may compromise the system. Replace unsuitable parts using the correct specification.

Safe Installation & Inspection

High-pressure coolant systems require careful handling.

Before servicing, isolate the machine & release pressure using the approved procedure. Never loosen a pressurised fitting or direct a coolant jet towards a person.

Inspect the mounting interface, arm & nozzle before reassembly. Use the correct components & sealing method.

Once installation is complete, follow the machine manufacturer's procedure for checking operation. Keep clear of moving machinery & pressurised fluid.

Maintaining NOGA Coolant Nozzles

A small outlet can become ineffective when contaminated or damaged.

Inspect nozzles for blockage, wear & connection damage. Use approved cleaning methods rather than sharp improvised tools that could alter the opening.

Store spare components by part number & outlet size. Clearly separating 2mm, 4mm & 6mm nozzles helps prevent accidental substitution.

For broader maintenance guidance, read How to Clean Your Gear Without Ruining It.

Planning a Better Coolant Spare-Parts Inventory

An effective inventory starts with the machines already in service.

Record each machine's approved nozzle size, thread connection, coolant arm arrangement & relevant product codes. This gives purchasing teams a reliable reference when replacements are needed.

Where several workstations use the same approved component, a small reserve may reduce interruptions. Avoid standardising different machines around one nozzle simply because the connection appears similar.

For broader workshop preparation, explore The Black Print: Spring Jobsite Prep.

Frequently Asked Questions About NOGA Coolant Nozzles

What are NOGA coolant nozzles used for?

NOGA coolant nozzles direct compatible cutting fluid towards an intended machining area. Correct selection depends on the machine's operating conditions & application.

What outlet sizes are available?

The collection lists 2mm, 4mm & 6mm outlet nozzles. Each should be matched to the installed system's requirements.

Do these nozzles have 1/4 NPT connections?

The listed CA1002, CA1004 & CA1006 products specify 1/4 NPT connections. Confirm the machine or coolant arm uses the same thread standard.

What is the difference between CA2000 & CA3000?

CA2000 is listed as a 164mm fixed coolant arm, while CA3000 is a 238mm variable arrangement. Both listed configurations include a 4mm nozzle.

Can I replace a 2mm nozzle with a 6mm nozzle?

Changing outlet diameter can affect fluid delivery characteristics. Confirm the machine's approved operating requirements before making the substitution.

Are these nozzles suitable for compressed air?

The listed products are identified for NOGA coolant-arm applications. Don't assume they are universal compressed-air fittings.

How do I choose the correct replacement?

Match the existing part number, outlet diameter & thread connection. Then verify the machine's pressure, flow & clearance requirements.

How should high-pressure coolant nozzles be serviced?

Isolate the machine & release pressure before working on the system. Inspect components for damage or blockage according to the manufacturer's instructions.

Why Buy NOGA Coolant Nozzles From Industrial Shed?

Industrial Shed provides Australian machining workshops access to NOGA coolant nozzles, fixed arms & variable high-pressure configurations. Buyers can compare product codes, outlet sizes & mounting arrangements before selecting replacements.

For business purchasing options, explore Trade Exclusives. Review Shipping & Delivery for current order information.

Shop NOGA Coolant Nozzles & High-Pressure Coolant Arms

Put the right coolant outlet where your machining process needs it. Shop NOGA Coolant Nozzles at Industrial Shed to compare 2mm, 4mm & 6mm replacements alongside CA2000 fixed arms & CA3000 variable configurations. Match the thread, check the machine's operating requirements & choose the components that make your next coolant-system replacement more straightforward.

Frequently Asked Questions

What Are LOC-LINE Nozzles Used For?

They are modular outlets used to direct air or suitable fluids towards a required working area. Different nozzle shapes provide different outlet patterns plus positioning options.

How Do I Know Which LOC-LINE System Size I Have?

Measure the widest outside diameter of a hose-segment knuckle. Approximate measurements are 16.59mm for 1/4", 25.15mm for 1/2" plus 31.35mm for 3/4" LOC-LINE systems.

What Does a Flat-Slot LOC-LINE Nozzle Do?

It produces a thin, flat flow pattern for directional control of air or fluids. Different slot heights are available according to system size.

What Is the Difference Between Flat-Slot & Multi-Hole Nozzles?

A flat-slot nozzle delivers through a continuous slot, while multi-hole versions divide the output across several holes. Select the outlet pattern according to the required application.

Are LOC-LINE Nozzles Adjustable?

They connect to LOC-LINE's modular ball-and-socket hose system, which can be repositioned by hand plus is designed to remain where it is set without spring-back.

Can LOC-LINE Be Used for EDM Flushing?

Yes. Precision Specialty Tooling identifies electrically non-conductive LOC-LINE as suitable for EDM flushing applications.

Will a 1/4" LOC-LINE Nozzle Fit a 1/2" System?

Choose components designed for the relevant LOC-LINE system size. Don't assume nozzles from different system sizes are directly interchangeable.

Brands

► Precision Specialty Tools | Nozzles

Targeted Coolant Delivery for Precision Machining 

Your coolant pump may be operating correctly while the cutting area still receives poorly directed fluid. The cause could be an unsuitable outlet diameter, an incorrectly positioned arm or a connection that doesn't match the machine. NOGA coolant nozzles give machining workshops defined outlet options for directing compatible cutting fluid towards the intended work area.

Unlike general-purpose air nozzles, this collection focuses on NOGA coolant-arm components. The listed range includes 2mm, 4mm & 6mm outlet nozzles with 1/4 NPT connections, alongside fixed & variable high-pressure coolant arms.

Selecting the right component begins with the installed system rather than the nozzle's appearance. For related machine-tool equipment, explore Precision Specialty Tools Holders, Metal Cutting & Grinding Tools & Countersinks & Accessories.

Why Coolant Nozzle Selection Matters?

A larger outlet isn't automatically better, just as a smaller outlet doesn't guarantee improved cutting performance.

Coolant delivery depends on the machine's pressure, flow capacity, fluid properties, nozzle geometry & position. Changing one component can affect the behaviour of the wider system.

An unsuitable nozzle may also create clearance problems inside the machine enclosure. Buyers should therefore consider both fluid delivery requirements & physical installation.

Comparing 2mm, 4mm & 6mm NOGA Coolant Nozzles

The collection provides three clearly identified outlet sizes.

NOGA CA1002 – 2mm Outlet

The NOGA CA1002 coolant nozzle is listed with a 2mm outlet & 1/4 NPT connection.

A smaller opening changes the outlet geometry, but actual delivery depends on the complete coolant system.

NOGA CA1004 – 4mm Outlet

The NOGA CA1004 coolant nozzle provides a 4mm outlet for a compatible NOGA arm.

This may be the appropriate replacement where the existing machine configuration specifies that size.

NOGA CA1006 – 6mm Outlet

The NOGA CA1006 coolant nozzle is listed with a 6mm outlet.

A larger opening should only be selected when the machine's delivery requirements support it.

Which Size Should You Choose?

Start with the existing approved configuration. If a different diameter is being considered, confirm the machine manufacturer's pressure, flow & application requirements first.

Understanding 1/4 NPT Coolant Connections

A nozzle that looks approximately the right size may still have the wrong thread.

What Is NPT?

NPT is a tapered pipe-thread standard. Its geometry differs from certain parallel-thread connections.

Why Compatibility Matters?

Incorrect thread engagement can damage fittings or create leaks. Never force a component into an incompatible port.

Checking the Existing Arm

Identify the installed thread specification before ordering. Compare it with the nozzle's listed connection.

Sealing Requirements

Follow the equipment manufacturer's approved sealing method. Unverified adaptors or improvised arrangements should be avoided.

NOGA CA2000 vs CA3000 Coolant Arms

The collection includes two different complete-arm configurations.

NOGA CA2000 Fixed Coolant Arm

The NOGA CA2000 fixed high-pressure coolant arm is listed at 164mm with a 1/4 NPT connection & 4mm nozzle.

A fixed arrangement may suit a machine requiring a consistent outlet position.

NOGA CA3000 Variable Coolant Arm

The NOGA CA3000 variable high-pressure coolant arm is listed at 238mm with a 1/4 NPT connection & 4mm nozzle.

Its variable configuration may be useful where the outlet needs a different approved positioning arrangement.

Comparing Arm Lengths

The listed 164mm & 238mm dimensions help buyers assess physical fitment. Check the complete operating envelope rather than relying on length alone.

Fixed or Variable?

Choose according to the machine layout, required outlet position & manufacturer's instructions. Neither configuration is automatically better for every application.

Coolant Direction for Different Machining Operations

The intended cutting process affects how fluid delivery should be planned.

Milling

The contact region changes as the tool moves across the workpiece. Nozzle position should suit the machine's approved cutting arrangement.

Drilling

Hole depth, chip evacuation & tool design can influence coolant requirements. Follow the cutting-tool manufacturer's guidance.

Turning

The cutting area may be relatively localised, but toolholder clearance & machine movement remain important.

Hole Finishing

Some finishing operations have different coolant requirements from heavy roughing. Select the arrangement appropriate to the process.

Choosing a Replacement Coolant Nozzle

A replacement order should answer five questions.

What Is the Existing Part Number?

Record the current nozzle reference before removing it. CA1002, CA1004 & CA1006 identify different outlet sizes.

Which Thread Is Installed?

Confirm the connection specification. A visually similar fitting may not be compatible.

What Pressure Does the Machine Use?

Verify the system's operating conditions. Don't infer a component's pressure rating solely from a high-pressure product description.

Which Fluid Is Being Delivered?

Check material & fluid compatibility according to the manufacturer's specifications.

Is There Enough Clearance?

Confirm that the arm & nozzle remain clear of moving machine components throughout the approved operating range.

Common Coolant Delivery Problems

Poor Nozzle Positioning

Fluid directed away from the intended area may not achieve the required delivery. Check the approved positioning arrangement.

Incorrect Outlet Diameter

Changing nozzle size can alter flow characteristics. Match the replacement to the machine's requirements.

Thread Mismatch

An incompatible fitting may leak or damage the connection. Verify the thread standard before installation.

Restricted Machine Clearance

A nozzle can appear to fit while the machine is stationary yet interfere during movement. Check the complete working envelope.

Damaged Fittings

Worn threads or cracked components may compromise the system. Replace unsuitable parts using the correct specification.

Safe Installation & Inspection

High-pressure coolant systems require careful handling.

Before servicing, isolate the machine & release pressure using the approved procedure. Never loosen a pressurised fitting or direct a coolant jet towards a person.

Inspect the mounting interface, arm & nozzle before reassembly. Use the correct components & sealing method.

Once installation is complete, follow the machine manufacturer's procedure for checking operation. Keep clear of moving machinery & pressurised fluid.

Maintaining NOGA Coolant Nozzles

A small outlet can become ineffective when contaminated or damaged.

Inspect nozzles for blockage, wear & connection damage. Use approved cleaning methods rather than sharp improvised tools that could alter the opening.

Store spare components by part number & outlet size. Clearly separating 2mm, 4mm & 6mm nozzles helps prevent accidental substitution.

For broader maintenance guidance, read How to Clean Your Gear Without Ruining It.

Planning a Better Coolant Spare-Parts Inventory

An effective inventory starts with the machines already in service.

Record each machine's approved nozzle size, thread connection, coolant arm arrangement & relevant product codes. This gives purchasing teams a reliable reference when replacements are needed.

Where several workstations use the same approved component, a small reserve may reduce interruptions. Avoid standardising different machines around one nozzle simply because the connection appears similar.

For broader workshop preparation, explore The Black Print: Spring Jobsite Prep.

Frequently Asked Questions About NOGA Coolant Nozzles

What are NOGA coolant nozzles used for?

NOGA coolant nozzles direct compatible cutting fluid towards an intended machining area. Correct selection depends on the machine's operating conditions & application.

What outlet sizes are available?

The collection lists 2mm, 4mm & 6mm outlet nozzles. Each should be matched to the installed system's requirements.

Do these nozzles have 1/4 NPT connections?

The listed CA1002, CA1004 & CA1006 products specify 1/4 NPT connections. Confirm the machine or coolant arm uses the same thread standard.

What is the difference between CA2000 & CA3000?

CA2000 is listed as a 164mm fixed coolant arm, while CA3000 is a 238mm variable arrangement. Both listed configurations include a 4mm nozzle.

Can I replace a 2mm nozzle with a 6mm nozzle?

Changing outlet diameter can affect fluid delivery characteristics. Confirm the machine's approved operating requirements before making the substitution.

Are these nozzles suitable for compressed air?

The listed products are identified for NOGA coolant-arm applications. Don't assume they are universal compressed-air fittings.

How do I choose the correct replacement?

Match the existing part number, outlet diameter & thread connection. Then verify the machine's pressure, flow & clearance requirements.

How should high-pressure coolant nozzles be serviced?

Isolate the machine & release pressure before working on the system. Inspect components for damage or blockage according to the manufacturer's instructions.