► P&N | Diamond Bits

Precise Cutting Strength & Clean Hole Formation For Aussie Hard-Material Work Drilling through tile, stone or masonry becomes unpredictable the moment a bit overheats or wanders off the mark. Across Somerville workshops, VIC dust settles into cut lines & exposes cheap diamond tools immediately. Peninsula humidity softens inferior bonding until...

Precise Cutting Strength & Clean Hole Formation For Aussie Hard-Material Work

Drilling through tile, stone or masonry becomes unpredictable the moment a bit overheats or wanders off the mark. Across Somerville workshops, VIC dust settles into cut lines & exposes cheap diamond tools immediately. Peninsula humidity softens inferior bonding until the cutting face sheds unevenly. Melbourne renovation corridors compress techs between walls, fixtures & concrete where every diamond bit must cut straight, resist heat & finish clean. This P&N range is engineered for Australian surfaces with consistent diamond concentration, stable bonding & clean drilling geometry. Crews rounding out drilling setups through Drill Accessories, running site tools powered by Power Tools, or shaping hard materials using Grinding & Cut-Off Wheels pick these bits because they hold their cut under pressure. Extra workflow support comes from Saws & Hammer Drills, both essential when prepping paths or anchors before drilling. Industrial Shed backs this collection because VIC teams need bits that thrive on demanding surfaces.

Cutting conditions vary across the state. Inland VIC grit increases friction inside drill holes. Peninsula moisture affects cooling during longer cuts. Melbourne construction lanes restrict tool angle until drilling becomes a controlled, slow-feed operation. Trades routing openings with Outdoor Power Tools feel instantly how P&N diamond bits stay steady, even as load, heat & feed pressure shift.

What’s in This Collection:

► P&N Diamond Tile Bits
‣ Chip-free drilling for porcelain, ceramic, vitrified tile & glazed finishes

► P&N Diamond Core Bits
‣ Hollow-wall cutting for pipes, fixtures, conduits & heavy anchoring

► P&N Diamond Burrs
‣ Precision shaping for steel, stone, composites & fine finishing tasks

► P&N Diamond Hole Saws
‣ Clean penetrations for plumbing, electrical & HVAC work

► P&N Diamond Drill Bit Sets
‣ Multi-size setups for builders, sparkles, fabricators & renovators

► Diamond Cutting Kits
‣ Full solutions for hard-material drilling across trade disciplines

 

Sidebar

Product Type

Show all

Brands

Price

$
to
$
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • P&N - 10mm Drill Diamond Core Bit Hangpack | 148010010P&N - 10mm Drill Diamond Core Bit Hangpack | 148010010
    P&N - 10mm Drill Diamond Core Bit Hangpack | 148010010
    P&N Diamond Core Drill Bit 10mm | 148010010 Get smooth, accurate drilling results with the P&N Diamond Core Drill Bit. Perfect for cutting through tough surfaces with ease. ► Key Features 10mm diameter — versatile sizing Diamond cutting edge — enhanced durability Core bit...
    $26.70
    $27.25
    $26.70
  • P&N - 8.0mm Drill Diamond Core Bit Hangpack | 148010008P&N - 8.0mm Drill Diamond Core Bit Hangpack | 148010008
    P&N - 8.0mm Drill Diamond Core Bit Hangpack | 148010008
    P&N Diamond Core Drill Bit 8.0mm | 148010008 Drill clean, precise holes in hard materials with the P&N Diamond Core Drill Bit. Designed for durability and smooth cutting performance. ► Key Features 8.0mm diameter — precise hole sizing Diamond cutting edge — superior cutting...
    $24.20
    $23.05
    $24.20
  • P&N - 10mm Drill Diamond Core Bit Set 6/8/ 3Pc | 148020001P&N - 10mm Drill Diamond Core Bit Set 6/8/ 3Pc | 148020001
    P&N - 10mm Drill Diamond Core Bit Set 6/8/ 3Pc | 148020001
    P&N Diamond Core Drill Bit Set 6/8/10mm 3Pc | 148020001 Get essential sizes in one kit with the P&N Diamond Core Drill Bit Set. Perfect for precision drilling across multiple applications. ► Key Features 3-piece set — includes 6mm, 8mm, and 10mm Diamond core...
    $46.25
    $44.05
    $46.25
  • P&N - 40mm Drill Diamond Core Bit Hangpack | 148010040P&N - 40mm Drill Diamond Core Bit Hangpack | 148010040
    P&N - 40mm Drill Diamond Core Bit Hangpack | 148010040
    P&N Diamond Core Drill Bit 40mm | 148010040 Tackle bigger drilling jobs with the P&N Diamond Core Drill Bit. Designed for clean, accurate holes in hard surfaces. ► Key Features 40mm diameter — suits larger installations Diamond core cutting edge — high durability Precision...
    $97.05
    $92.40
    $97.05
  • P&N - 5.0mm Drill Diamond Core Bit Hangpack | 148010005P&N - 5.0mm Drill Diamond Core Bit Hangpack | 148010005
    P&N - 5.0mm Drill Diamond Core Bit Hangpack | 148010005
    P&N Diamond Core Drill Bit 5.0mm | 148010005 Drill clean, precise holes in hard materials with the P&N Diamond Core Drill Bit. Designed for durability and accuracy in demanding applications. ► Key Features 5.0mm diameter — precision drilling Diamond core tip — superior cutting...
    $19.35
    $18.40
    $19.35
  • P&N - 50mm Drill Diamond Core Bit Hangpack | 148010050P&N - 50mm Drill Diamond Core Bit Hangpack | 148010050
    P&N - 50mm Drill Diamond Core Bit Hangpack | 148010050
    P&N Diamond Core Drill Bit 50mm | 148010050 Power through large drilling tasks with the P&N Diamond Core Drill Bit. Built for accuracy and durability on tough materials. ► Key Features 50mm diameter — ideal for large openings Diamond core tip — superior cutting...
    $121.30
    $115.50
    $121.30
  • P&N - 6.0mm Drill Diamond Core Bit Hangpack | 148010006P&N - 6.0mm Drill Diamond Core Bit Hangpack | 148010006
    P&N - 6.0mm Drill Diamond Core Bit Hangpack | 148010006
    P&N Diamond Core Drill Bit 6.0mm | 148010006 Tackle hard materials with confidence using the P&N Diamond Core Drill Bit. Engineered for clean, accurate holes with minimal damage. ► Key Features 6.0mm diameter — versatile sizing Diamond core cutting edge — high durability Precision...
    $20.90
    $19.90
    $20.90
  • P&N - 6-15mm Drill Diamond Core Bit Set 6Pc | 148010706P&N - 6-15mm Drill Diamond Core Bit Set 6Pc | 148010706
    P&N - 6-15mm Drill Diamond Core Bit Set 6Pc | 148010706
    148010706 P&N Diamond Core Drill Bit Set 6–15mm 6Pc | 148010706 Cover multiple drilling sizes with the P&N Diamond Core Drill Bit Set. A versatile solution for clean, accurate holes in hard materials. ► Key Features 6-piece set — sizes from 6mm to 15mm...
    $83.80
    $79.80
    $83.80
  • P&N - 6.0mm Drill Diamond Core Bit Tradepack | 148020006P&N - 6.0mm Drill Diamond Core Bit Tradepack | 148020006
    P&N - 6.0mm Drill Diamond Core Bit Tradepack | 148020006
    P&N Diamond Core Drill Bit Tradepack 6.0mm 3Pc | 148020006 Stock up with the P&N Diamond Core Drill Bit Tradepack. Designed for consistent performance across repeated drilling tasks. ► Key Features 6.0mm diameter — versatile size 3-piece pack — ideal for trade use Diamond...
    $34.80
    $33.10
    $34.80
  • P&N - 35mm Drill Diamond Core Bit Hangpack | 148010035P&N - 35mm Drill Diamond Core Bit Hangpack | 148010035
    P&N - 35mm Drill Diamond Core Bit Hangpack | 148010035
    P&N Diamond Core Drill Bit 35mm | 148010035 Drill larger holes cleanly with the P&N Diamond Core Drill Bit. Built for precision and durability when working with hard materials. ► Key Features 35mm diameter — ideal for larger cut-outs Diamond core tip — superior...
    $84.90
    $80.85
    $84.90
  • P&N - 32mm Drill Diamond Core Bit Hangpack | 148010032P&N - 32mm Drill Diamond Core Bit Hangpack | 148010032
    P&N - 32mm Drill Diamond Core Bit Hangpack | 148010032
    P&N Diamond Core Drill Bit 32mm | 148010032 Designed for maximum performance, the P&N Diamond Core Drill Bit delivers precise results in even the toughest materials. ► Key Features 32mm diameter — extra-large drilling Diamond cutting edge — superior durability Core bit construction —...
    $75.00
    $71.40
    $75.00
  • P&N - 30mm Drill Diamond Core Bit Hangpack | 148010030P&N - 30mm Drill Diamond Core Bit Hangpack | 148010030
    P&N - 30mm Drill Diamond Core Bit Hangpack | 148010030
    P&N Diamond Core Drill Bit 30mm | 148010030 Handle large-scale drilling jobs with the P&N Diamond Core Drill Bit. Built for precision and durability in demanding conditions. ► Key Features 30mm diameter — heavy-duty applications Diamond edge — clean cutting action Core bit design...
    $71.70
    $68.25
    $71.70
  • P&N - 25mm Drill Diamond Core Bit Hangpack | 148010025P&N - 25mm Drill Diamond Core Bit Hangpack | 148010025
    P&N - 25mm Drill Diamond Core Bit Hangpack | 148010025
    P&N Diamond Core Drill Bit 25mm | 148010025 Take on demanding drilling tasks with the P&N Diamond Core Drill Bit. Designed for accuracy and durability across hard materials. ► Key Features 25mm diameter — large hole drilling Diamond cutting edge — long-lasting performance Core...
    $60.65
    $57.75
    $60.65
  • P&N - 20mm Drill Diamond Core Bit Hangpack | 148010020P&N - 20mm Drill Diamond Core Bit Hangpack | 148010020
    P&N - 20mm Drill Diamond Core Bit Hangpack | 148010020
    P&N Diamond Core Drill Bit 20mm | 148010020 Built for larger diameter drilling, the P&N Diamond Core Drill Bit delivers clean results in tough materials. ► Key Features 20mm diameter — wide hole applications Diamond cutting edge — smooth cutting Core drilling design —...
    $50.70
    $48.25
    $50.70
  • P&N - 15mm Drill Diamond Core Bit Hangpack | 148010015P&N - 15mm Drill Diamond Core Bit Hangpack | 148010015
    P&N - 15mm Drill Diamond Core Bit Hangpack | 148010015
    P&N Diamond Core Drill Bit 15mm | 148010015 Power through tough materials with the P&N Diamond Core Drill Bit. Engineered for smooth cutting and long-lasting performance. ► Key Features 15mm diameter — larger hole applications Diamond edge — precise cutting Core design — reduced...
    $41.85
    $39.85
    $41.85
  • P&N - 12mm Drill Diamond Core Bit Hangpack | 148010012P&N - 12mm Drill Diamond Core Bit Hangpack | 148010012
    P&N - 12mm Drill Diamond Core Bit Hangpack | 148010012
    P&N Diamond Core Drill Bit 12mm | 148010012 Designed for precision and durability, the P&N Diamond Core Drill Bit delivers clean holes in hard materials without cracking or chipping. ► Key Features 12mm diameter — accurate drilling Diamond cutting edge — smooth performance Core...
    $33.65
    $32.05
    $33.65

Performance That Delivers Clean Results On Australia’s Toughest Materials

Drilling fails when diamond bonds crumble, shanks flex or the cutting face overheats. Inferior bits skate across tile, chip edges or stall in dense stone. This P&N lineup avoids those failures with balanced diamond loading, true-center construction & clean chip removal. Tile bits protect glazed finishes. Core bits cut level openings in mixed substrates. Burrs handle fine material shaping without burning.

Australian sites amplify cutting challenges. Peninsula moisture interferes with cooling cycles. Inland VIC dust accelerates wear on cutting edges. Melbourne renovation spaces demand precise drilling angles where accuracy matters more than speed. Crews drill across tile, stone, masonry, composite panels & steel in tight renovations, industrial sheds, marine facilities & fabrication bays where hardness & position change constantly. This P&N collection fits those realities with bits that stay sharp, stay stable & stay predictable. Industrial Shed supports VIC workers with diamond tools that cut well on the first attempt.

Workflow below the fold benefits from Clamps & Vises for holding hard materials steady, Workbenches for clean drilling setups & Safety Boots & Shoes for stable footing during heavy drilling sessions. Teams stay productive with Same Day Dispatch, while Warranty & Parts Support ensures consistent backing for high-load diamond tools.

► Clean drilling performance across tile, stone, masonry & composite surfaces
► Heat-resistant bonding built for dust, load & demanding site conditions
► Fast Australia-wide dispatch for urgent renovation or fabrication tasks
► Bits designed for builders, sparkles, fabricators & maintenance crews

Struggling with worn tools or slow workflow?
Industrial Shed helps techs stay sharp with quality gear, real support & fast delivery nationwide.

Frequently Asked Questions

Glazing builds heat quickly. Quality diamond bonding maintains exposure so the bit stays aggressive.

Yes. P&N bonding supports consistent cutting but requires controlled feed & cooling.

Slow penetration, excessive heat, glazed edges or wobble indicate the tool is done.

Brands

P&N

P&N