► Metrinch | Spark Plugs

Tight Engagement & Clean Ignition Service For Aussie Workshops Spark plug work demands accuracy the moment the tool touches the plug. Somerville workshops gather fine VIC dust that settles into plug wells & widens wear on cheap sockets. Peninsula coastal air introduces moisture that corrodes soft steel & causes binding...

Tight Engagement & Clean Ignition Service For Aussie Workshops

Spark plug work demands accuracy the moment the tool touches the plug. Somerville workshops gather fine VIC dust that settles into plug wells & widens wear on cheap sockets. Peninsula coastal air introduces moisture that corrodes soft steel & causes binding inside deep plug tubes. Melbourne fleet bays squeeze techs around manifolds, coil packs & engine housings where a spark plug socket must grab firmly, release cleanly & protect the plug’s ceramic sleeve from cracking. This collection brings together Metrinch spark plug sockets shaped for real Australian service conditions with exact machining, non-marring inserts & smooth torque delivery across tight engine layouts. Crews already pulling coil packs with Screwdriver Sets, servicing engine assemblies supported by Rod Ends Plain Bearings & Bushings, or working on mixed fleets that use Hex Bolts will adopt these sockets naturally. Industrial Shed carries them because VIC mechanics know spark plug work leaves no room for slips.

Different regions shift how spark plug sockets behave. Inland VIC dust packs inside plug wells. Peninsula humidity seeps around threads & increases resistance on older plugs. Melbourne mechanical corridors restrict wrist angle until plug removal becomes a slow, controlled movement rather than a clean break. Workers clearing engine tops with a Portable Air Compressor or marking firing sequences using Measuring & Layout Tools notice immediately how Metrinch spark plug sockets grip securely & extract smoothly without damaging the insulator.

What’s in This Collection:

► Metrinch Standard Spark Plug Sockets
‣ Secure rubber or magnetic hold for clean plug removal

► Metrinch Thin-Wall Spark Plug Sockets
‣ Slim profiles for tight access around modern engine heads

► Metrinch Deep Spark Plug Sockets
‣ Extra reach for recessed plug designs & narrow tubes

► Metrinch Magnetic Spark Plug Sockets
‣ Strong retention for smooth extraction in awkward angles

► Metrinch High-Strength Spark Plug Sockets
‣ Tough metallurgy for stubborn plugs & heat-cycled engines

► Spark Plug Socket Sets
‣ Full multi-size kits for workshops handling mixed engine types

 

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Metrinch - 3/8" x 5/8" Spark Plug Socket | MET-1395
    Metrinch - 3/8" x 5/8" Spark Plug Socket | MET-1395
    Metrinch 3/8" x ⅝" Spark Plug Socket | MET-1395 The Metrinch MET-1395 Spark Plug Socket is designed for reliable spark plug installation and removal in automotive applications. Built for dependable grip and secure spark plug engagement during servicing tasks. ► Key Features 3/8" drive...
    $16.50
    $18.95
    $16.50
  • Metrinch - 3/8" x 13/16" Spark Plug Socket | MET-1396
    Metrinch - 3/8" x 13/16" Spark Plug Socket | MET-1396
    Metrinch 3/8" x 13/16" Spark Plug Socket | MET-1396 The Metrinch MET-1396 Spark Plug Socket is designed for secure and reliable spark plug servicing in automotive workshop environments. Built for dependable grip and smooth spark plug installation and removal. ► Key Features 3/8" drive...
    $18.43
    $20.95
    $18.43
  • Metrinch - 1/2" 21mm 13-16" Plug Socket | MET-1293
    Metrinch - 1/2" 21mm 13-16" Plug Socket | MET-1293
    Metrinch 1/2" 21mm 13/16" Plug Socket | MET-1293 The Metrinch MET-1293 Plug Socket is designed for automotive spark plug servicing applications, covering both 21mm and 13/16" sizing in one practical socket. ► Key Features Dual-size plug socket suits 21mm and 13/16" ½" drive socket...
    $19.89
    $22.95
    $19.89
  • Metrinch - 1/2" Drive 16mm x 5/8" Spark Plug Socket | MET-1292
    Metrinch - 1/2" Drive 16mm x 5/8" Spark Plug Socket | MET-1292
    Metrinch 1/2" 16mm ⅝" Spark Plug Socket | MET-1292 The Metrinch MET-1292 Spark Plug Socket is designed for spark plug installation and removal in automotive workshop applications. Built to suit both 16mm and ⅝" spark plug sizes. ► Key Features Dual-size spark plug socket...
    $17.94
    $20.95
    $17.94

Designed To Support Crews When Timing Matters Most

Spark plug service stalls when tools slip or lose retention mid-extraction. Cheap sockets twist under heat cycles, bind inside plug tubes or chip the ceramic sleeve during installation. This collection avoids those failures with Metrinch spark plug sockets engineered for secure grip, clean torque feel & smooth release. Thin-wall models handle tight coil layouts. Deep sockets reach modern recessed wells. High-strength versions help free plugs that have endured thousands of heat cycles.

Australia adds extra difficulty to ignition service. Peninsula moisture settles around plug threads overnight. Inland VIC dust filters into plug wells & increases resistance during breakaway torque. Melbourne fleet bays force odd angles where torque must be applied slowly with full alignment. Mobile techs handle plug changes across driveways, industrial carparks, loading zones & rooftops where space & footing shift constantly. This Metrinch range fits those realities with sockets that stay stable, stay protective & stay predictable across every cycle. Industrial Shed stocks them because local mechanics depend on tools that protect both the plug & the engine head.

Busy teams stay productive with Same Day Dispatch when plug socket sets crack mid-service or new technicians require full kits. Fleet & mechanical crews working through tight service windows rely on Trade Exclusives to maintain complete size coverage across mixed petrol engines. Tools like Small Parts Organisers keep plug-related fittings separated, while Safety Boots & Shoes help techs keep steady footing during angled ignition work.

► Accurate sizing that protects ceramic plug bodies during removal
► Thin-wall & deep options for tight or recessed plug access
► Fast Australia-wide delivery for urgent tune-up or fleet service
► Sockets shaped for heat, dust, moisture & real Aussie workshop pressure

Trust your next job to tools built for trade work.
The Industrial Shed crew in Somerville supplies proven gear with fast dispatch across Australia.

Frequently Asked Questions

Internal liners or magnetic holders stabilise the ceramic so torque transfers cleanly to the hex.

Modern petrol engines with narrow plug tubes, tight coil pack spacing & recessed head designs.

Yes. Strong metallurgy & accurate sizing help break stubborn plugs free without rounding the hex.

Brands

Metrinch

Metrinch