►Makita Accessories | Sds-Plus Drilling & Accessories

Faster Concrete Drilling, Cleaner Holes & Reliable Trade Performance Drilling into concrete, brick & masonry is one of the toughest tasks on any jobsite. Whether you're installing anchors, running services, fixing structural components or completing fit-out work, SDS-Plus systems are designed to deliver high-impact drilling performance in hard materials. Makita...

Faster Concrete Drilling, Cleaner Holes & Reliable Trade Performance

Drilling into concrete, brick & masonry is one of the toughest tasks on any jobsite.

Whether you're installing anchors, running services, fixing structural components or completing fit-out work, SDS-Plus systems are designed to deliver high-impact drilling performance in hard materials. Makita SDS-Plus drilling & accessories are built to improve drilling speed, accuracy & durability across construction, electrical, plumbing & maintenance environments.

From small fixings through to heavy-duty masonry work, the right drilling accessories help reduce wear, improve penetration speed & maintain consistent hole quality.

Trades often pair SDS-Plus systems with Heavy-Duty Power Tools, Carpentry Tools & Fasteners & Metal Cutting & Grinding Tools.

What Are Makita SDS-Plus Drilling & Accessories?

Makita SDS-Plus accessories are high-impact drilling components designed for rotary hammer drills used in concrete, brick, stone & masonry applications.

Common accessory types include:

► SDS-Plus drill bits
► Masonry drill bits
► Chisels (flat, point, scaling)
► Dust extraction drilling accessories
► Depth stops & guides
► Extension rods
► Replacement hammer drilling components
► Genuine Makita SDS-Plus accessories

These accessories are engineered to handle high-impact forces while maintaining drilling accuracy & consistency.

Why Choose Makita SDS-Plus Accessories?

Concrete drilling requires consistent impact performance, heat resistance & durability under load.

Choosing the right SDS-Plus accessories helps improve:

► Drilling speed in concrete & masonry
► Hole accuracy & consistency
► Tool lifespan & durability
► Reduced operator fatigue
► Improved anchor installation quality
► Jobsite productivity

What Poor Drill Bit Selection Causes?

Incorrect or low-quality bits can lead to:

► Slower penetration
► Overheating & bit wear
► Drifting holes
► Cracked masonry
► Increased rework
► Reduced tool efficiency

Reliable SDS-Plus accessories help eliminate these issues on demanding sites.

Trades That Use SDS-Plus Systems Daily

► Builders
► Concreters
► Electricians
► Plumbers
► HVAC installers
► Civil construction teams
► Maintenance contractors
► Fit-out specialists

Common Applications

Concrete Anchoring & Fixing

Used for drilling holes for anchors, bolts, brackets & structural fixings.

Electrical Installations

Used for conduit fixing, wall chasing prep & mounting electrical systems.

Plumbing & Mechanical Work

Used for pipe brackets, penetrations & service installations into masonry surfaces.

Construction & Structural Work

Used for heavy-duty drilling into reinforced concrete, brick & stone materials.

Professionals working in masonry drilling workflows often also rely on:

► Metal Cutting & Grinding Tools
► Specialty Fasteners & Fixings
► Tool Storage & Workbenches
► Dust Extraction & Safety Gear

Product Selection Guide

Application

Recommended Accessory

Concrete drilling

SDS-Plus drill bit

Brick drilling

Masonry drill bit

Demolition/chiselling

Flat chisel

Breaking material

Point chisel

Dust control drilling

Dust extraction attachment

Deep drilling

Extension rod

Always match bit diameter, length & material rating to the application.

Expert Tips

Correct Bit Selection Prevents Drill Failure

Most SDS drilling issues come from incorrect bit usage rather than tool faults.

To improve performance:

► Let hammer action do the work
► Avoid excessive pressure
► Use sharp, high-quality bits
► Clear dust from holes regularly
► Match bit type to masonry hardness
► Replace worn bits early

Better bit selection improves drilling speed, accuracy & tool lifespan.

For broader jobsite reliability insights, see The Jobsite Doesn't Forgive. We Do..

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 315mm | E-04363
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 315mm | E-04363
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 315mm | E-04363 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 315mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $23.54
    $36.70
    $23.54
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 265mm | E-04357
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 265mm | E-04357
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 265mm | E-04357 Keep your Makita gear running at full capacity with the genuine Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 265mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features Genuine Makita accessory...
    $18.55
    $29.00
    $18.55
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 165mm | E-04335
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 165mm | E-04335
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 165mm | E-04335 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 165mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $11.28
    $17.60
    $11.28
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 315mm | E-04307
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 315mm | E-04307
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 315mm | E-04307 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 315mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $17.82
    $30.75
    $17.82
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 265mm | E-04298
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 265mm | E-04298
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 265mm | E-04298 Keep your Makita gear running at full capacity with the genuine Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 265mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks...
    $13.86
    $23.95
    $13.86
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 115mm | E-04260
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 115mm | E-04260
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 115mm | E-04260 When the job can’t wait for a part that almost fits, the genuine Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6mm x 115mm drops straight in and gets you back to work. ► Key Features...
    $8.38
    $13.10
    $8.38
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 465mm | E-04254
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 465mm | E-04254
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 465mm | E-04254 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 465mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $29.70
    $51.30
    $29.70
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 315mm | E-04248
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 315mm | E-04248
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 315mm | E-04248 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 315mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $22.32
    $38.55
    $22.32
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 265mm | E-04232
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 265mm | E-04232
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 265mm | E-04232 When the job can’t wait for a part that almost fits, the genuine Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 265mm drops straight in and gets you back to work. ► Key Features...
    $15.30
    $26.45
    $15.30
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 215mm | E-04226
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 215mm | E-04226
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 215mm | E-04226 Keep your Makita gear running at full capacity with the genuine Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 215mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features Genuine Makita accessory...
    $15.47
    $24.10
    $15.47
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 165mm | E-04210
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 165mm | E-04210
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 165mm | E-04210 When the job can’t wait for a part that almost fits, the genuine Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 165mm drops straight in and gets you back to work. ► Key Features...
    $9.58
    $14.90
    $9.58
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 115mm | E-04204
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 115mm | E-04204
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 115mm | E-04204 When the job can’t wait for a part that almost fits, the genuine Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 115mm drops straight in and gets you back to work. ► Key Features...
    $8.67
    $13.50
    $8.67
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 465mm | E-04195
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 465mm | E-04195
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 465mm | E-04195 When the job can’t wait for a part that almost fits, the genuine Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 465mm drops straight in and gets you back to work. ► Key Features...
    $32.12
    $50.20
    $32.12
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 315mm | E-04189
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 315mm | E-04189
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 315mm | E-04189 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 315mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $23.14
    $36.10
    $23.14
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 215mm | E-04167
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 215mm | E-04167
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 215mm | E-04167 Keep your Makita gear running at full capacity with the genuine Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 215mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features Genuine Makita accessory...
    $14.96
    $23.30
    $14.96
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 165mm | E-04151
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 165mm | E-04151
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 165mm | E-04151 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 165mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $8.58
    $13.40
    $8.58
  • Makita Sds-Plus Drilling Standard 4-Cutter - Sds-Plus Drill Bit 25 X 460mm | SKU B-68264
    Makita - Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 25 x 460mm | B-68264
    Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 25 x 460mm | B-68264 The Makita Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 25 x 460mm is the genuine article — made to the same standard as the tool it fits, and priced 10%...
    $73.71
    $117.00
    $73.71
  • Makita Sds-Plus Drilling Standard 4-Cutter - Sds-Plus Drill Bit 25 X 260mm | SKU B-68208
    Makita - Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 25 x 260mm | B-68208
    Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 25 x 260mm | B-68208 Keep your Makita gear running at full capacity with the genuine Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 25 x 260mm, in stock at Industrial Shed and dispatched fast Australia-wide....
    $67.32
    $106.80
    $67.32
  • Makita Sds-Plus Drilling Standard 4-Cutter - Sds-Plus Drill Bit 22 X 460mm | SKU B-68258
    Makita - Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 22 x 460mm | B-68258
    Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 22 x 460mm | B-68258 When the job can’t wait for a part that almost fits, the genuine Makita Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 22 x 460mm drops straight in and gets you...
    $66.51
    $105.55
    $66.51
  • Makita Sds-Plus Drilling Standard 4-Cutter - Sds-Plus Drill Bit 22 X 260mm | SKU B-68199
    Makita - Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 22 x 260mm | B-68199
    Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 22 x 260mm | B-68199 The Makita Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 22 x 260mm is the genuine article — made to the same standard as the tool it fits, and priced 10%...
    $53.91
    $85.55
    $53.91

Why Buy From Industrial Shed?

Makita SDS-Plus accessories are essential for fast, accurate & reliable concrete drilling across demanding trade environments.

Industrial Shed supplies genuine accessories designed to improve drilling efficiency, reduce downtime & support professional construction performance.

For urgent requirements, take advantage of Same Day Dispatch. Ongoing support is available through Warranty & Parts Support.

✔ Genuine Makita accessories
✔ High-performance concrete drilling
✔ Durable SDS-Plus construction
✔ Improved speed & accuracy
✔ Fast Australia-wide dispatch
✔ Trade support available

From electrical installations & plumbing work through to structural anchoring & construction drilling, choose Makita SDS-Plus accessories designed for consistent, high-impact performance.

Frequently Asked Questions

SDS-Plus systems are used for drilling & chiselling concrete, brick, stone & masonry materials.

Yes, but performance depends on bit quality, reinforcement density & tool power.

SDS-Plus is for light to medium-duty drilling, while SDS-Max is used for heavy industrial drilling.

Wear is caused by heat, incorrect pressure, rebar contact & general material hardness.

No — SDS bits require compatible rotary hammer systems.

Brands

Makita Accessories

Makita Accessories