►Makita Accessories | Sds-Plus Drilling & Accessories

Faster Concrete Drilling, Cleaner Holes & Reliable Trade Performance Drilling into concrete, brick & masonry is one of the toughest tasks on any jobsite. Whether you're installing anchors, running services, fixing structural components or completing fit-out work, SDS-Plus systems are designed to deliver high-impact drilling performance in hard materials. Makita...

Faster Concrete Drilling, Cleaner Holes & Reliable Trade Performance

Drilling into concrete, brick & masonry is one of the toughest tasks on any jobsite.

Whether you're installing anchors, running services, fixing structural components or completing fit-out work, SDS-Plus systems are designed to deliver high-impact drilling performance in hard materials. Makita SDS-Plus drilling & accessories are built to improve drilling speed, accuracy & durability across construction, electrical, plumbing & maintenance environments.

From small fixings through to heavy-duty masonry work, the right drilling accessories help reduce wear, improve penetration speed & maintain consistent hole quality.

Trades often pair SDS-Plus systems with Heavy-Duty Power Tools, Carpentry Tools & Fasteners & Metal Cutting & Grinding Tools.

What Are Makita SDS-Plus Drilling & Accessories?

Makita SDS-Plus accessories are high-impact drilling components designed for rotary hammer drills used in concrete, brick, stone & masonry applications.

Common accessory types include:

► SDS-Plus drill bits
► Masonry drill bits
► Chisels (flat, point, scaling)
► Dust extraction drilling accessories
► Depth stops & guides
► Extension rods
► Replacement hammer drilling components
► Genuine Makita SDS-Plus accessories

These accessories are engineered to handle high-impact forces while maintaining drilling accuracy & consistency.

Why Choose Makita SDS-Plus Accessories?

Concrete drilling requires consistent impact performance, heat resistance & durability under load.

Choosing the right SDS-Plus accessories helps improve:

► Drilling speed in concrete & masonry
► Hole accuracy & consistency
► Tool lifespan & durability
► Reduced operator fatigue
► Improved anchor installation quality
► Jobsite productivity

What Poor Drill Bit Selection Causes?

Incorrect or low-quality bits can lead to:

► Slower penetration
► Overheating & bit wear
► Drifting holes
► Cracked masonry
► Increased rework
► Reduced tool efficiency

Reliable SDS-Plus accessories help eliminate these issues on demanding sites.

Trades That Use SDS-Plus Systems Daily

► Builders
► Concreters
► Electricians
► Plumbers
► HVAC installers
► Civil construction teams
► Maintenance contractors
► Fit-out specialists

Common Applications

Concrete Anchoring & Fixing

Used for drilling holes for anchors, bolts, brackets & structural fixings.

Electrical Installations

Used for conduit fixing, wall chasing prep & mounting electrical systems.

Plumbing & Mechanical Work

Used for pipe brackets, penetrations & service installations into masonry surfaces.

Construction & Structural Work

Used for heavy-duty drilling into reinforced concrete, brick & stone materials.

Professionals working in masonry drilling workflows often also rely on:

► Metal Cutting & Grinding Tools
► Specialty Fasteners & Fixings
► Tool Storage & Workbenches
► Dust Extraction & Safety Gear

Product Selection Guide

Application

Recommended Accessory

Concrete drilling

SDS-Plus drill bit

Brick drilling

Masonry drill bit

Demolition/chiselling

Flat chisel

Breaking material

Point chisel

Dust control drilling

Dust extraction attachment

Deep drilling

Extension rod

Always match bit diameter, length & material rating to the application.

Expert Tips

Correct Bit Selection Prevents Drill Failure

Most SDS drilling issues come from incorrect bit usage rather than tool faults.

To improve performance:

► Let hammer action do the work
► Avoid excessive pressure
► Use sharp, high-quality bits
► Clear dust from holes regularly
► Match bit type to masonry hardness
► Replace worn bits early

Better bit selection improves drilling speed, accuracy & tool lifespan.

For broader jobsite reliability insights, see The Jobsite Doesn't Forgive. We Do..

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Makita Sds-Plus Drilling Standard 2-Cutter - Sds-Plus Drill Bit 3.5mm X 110mm | SKU D-15665Makita - Standard 2-Cutter - SDS-Plus Drill Bit 3.5mm x 110mm | D-15665
    Makita - Standard 2-Cutter - SDS-Plus Drill Bit 3.5mm x 110mm | D-15665
    Standard 2-Cutter - SDS-Plus Drill Bit 3.5mm x 110mm | D-15665 Keep your Makita gear running at full capacity with the genuine Standard 2-Cutter - SDS-Plus Drill Bit 3.5mm x 110mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus...
    $2.70
    $4.30
    $2.70
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 465mm | E-04379
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 465mm | E-04379
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 465mm | E-04379 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 465mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $30.83
    $48.10
    $30.83
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 10mm X 600mm | SKU B-47612
    Makita - V-PLUS SDS-Plus 2-Cutter 10mm x 600mm | B-47612
    V-PLUS SDS-Plus 2-Cutter 10mm x 600mm | B-47612 Keep your Makita gear running at full capacity with the genuine V-PLUS SDS-Plus 2-Cutter 10mm x 600mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into the hammer...
    $23.67
    $40.90
    $23.67
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 4mm X 160mm | SKU B-47248
    Makita - V-PLUS SDS-Plus 2-Cutter 4mm x 160mm | B-47248
    V-PLUS SDS-Plus 2-Cutter 4mm x 160mm | B-47248 The Makita V-PLUS SDS-Plus 2-Cutter 4mm x 160mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features SDS-Plus shank...
    $6.57
    $11.40
    $6.57
  • Makita SDS-Plus Drilling SDS Bit Grease 100Ml Pump Pack | 194683-7Makita - SDS Bit Grease 100ml Pump Pack | 194683-7
    Makita - SDS Bit Grease 100ml Pump Pack | 194683-7
    SDS Bit Grease 100ml Pump Pack | 194683-7 Keep your Makita gear running at full capacity with the genuine SDS Bit Grease 100ml Pump Pack, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into the hammer...
    $12.68
    $20.60
    $12.68
  • Makita SDS-Plus Drilling Dust Extraction Cup Set - Dhr242 / Dhr283 / / Hr2610T | 195179-1
    Makita - Dust Extraction Cup Set - DHR242 / DHR283 / / HR2610T | 195179-1
    Dust Extraction Cup Set - DHR242 / DHR283 / / HR2610T | 195179-1 The Makita Dust Extraction Cup Set - DHR242 / DHR283 / / HR2610T is the genuine article — made to the same standard as the tool it fits, and priced 10%...
    $15.48
    $24.60
    $15.48
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 16mm x 1000mm | E-10811
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 16mm x 1000mm | E-10811
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 16mm x 1000mm | E-10811 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 16mm x 1000mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $99.75
    $155.80
    $99.75
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 10mm x 1000mm | E-10752
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 10mm x 1000mm | E-10752
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 10mm x 1000mm | E-10752 When the job can’t wait for a part that almost fits, the genuine Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 10mm x 1000mm drops straight in and gets you back to work. ► Key Features...
    $78.20
    $122.10
    $78.20
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 165mm | E-04335
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 165mm | E-04335
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 165mm | E-04335 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 6.5mm x 165mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $11.28
    $17.60
    $11.28
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 165mm | E-04210
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 165mm | E-04210
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 165mm | E-04210 When the job can’t wait for a part that almost fits, the genuine Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5.5mm x 165mm drops straight in and gets you back to work. ► Key Features...
    $9.58
    $14.90
    $9.58
  • Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 165mm | E-04151
    Makita - Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 165mm | E-04151
    Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 165mm | E-04151 The Makita Nemesis-2 SDS-Plus 4-Cutter Drill Bit 5mm x 165mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ►...
    $8.58
    $13.40
    $8.58
  • Makita Sds-Plus Drilling Standard 4-Cutter - Sds-Plus Drill Bit 12 X 210mm | SKU B-62745
    Makita - Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 12 x 210mm | B-62745
    Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 12 x 210mm | B-62745 The Makita Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 12 x 210mm is the genuine article — made to the same standard as the tool it fits, and priced 10%...
    $11.16
    $17.65
    $11.16
  • Makita Sds-Plus Drilling Standard 4-Cutter - Sds-Plus Drill Bit 5 X 210mm | SKU B-68149
    Makita - Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 5 x 210mm | B-68149
    Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 5 x 210mm | B-68149 Keep your Makita gear running at full capacity with the genuine Standard 4-Cutter Drill Bit - SDS-Plus Drill Bit 5 x 210mm, in stock at Industrial Shed and dispatched fast Australia-wide....
    $5.31
    $8.40
    $5.31
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 25mm X 1000mm | SKU B-48256
    Makita - V-PLUS SDS-Plus 2-Cutter 25mm x 1000mm | B-48256
    V-PLUS SDS-Plus 2-Cutter 25mm x 1000mm | B-48256 Keep your Makita gear running at full capacity with the genuine V-PLUS SDS-Plus 2-Cutter 25mm x 1000mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into the hammer...
    $130.32
    $225.50
    $130.32
  • Makita Sds-Plus Drilling Standard 2-Cutter - Sds-Plus Drill Bit 25mm X 460mm | SKU D-15257Makita - Standard 2-Cutter - SDS-Plus Drill Bit 25mm x 460mm | D-15257
    Makita - Standard 2-Cutter - SDS-Plus Drill Bit 25mm x 460mm | D-15257
    Standard 2-Cutter - SDS-Plus Drill Bit 25mm x 460mm | D-15257 When the job can’t wait for a part that almost fits, the genuine Makita Standard 2-Cutter - SDS-Plus Drill Bit 25mm x 460mm drops straight in and gets you back to work. ►...
    $24.00
    $38.50
    $24.00
  • Makita Sds-Plus Drilling Standard 2-Cutter - Sds-Plus Drill Bit 25mm X 260mm | SKU D-00387Makita - Standard 2-Cutter - SDS-Plus Drill Bit 25mm x 260mm | D-00387
    Makita - Standard 2-Cutter - SDS-Plus Drill Bit 25mm x 260mm | D-00387
    Standard 2-Cutter - SDS-Plus Drill Bit 25mm x 260mm | D-00387 When the job can’t wait for a part that almost fits, the genuine Makita Standard 2-Cutter - SDS-Plus Drill Bit 25mm x 260mm drops straight in and gets you back to work. ►...
    $17.78
    $28.25
    $17.78
  • Makita Sds-Plus Drilling Standard 2-Cutter - Sds-Plus Drill Bit 12mm X 600mm | SKU D-29153Makita - Standard 2-Cutter - SDS-Plus Drill Bit 12mm x 600mm | D-29153
    Makita - Standard 2-Cutter - SDS-Plus Drill Bit 12mm x 600mm | D-29153
    Standard 2-Cutter - SDS-Plus Drill Bit 12mm x 600mm | D-29153 When the job can’t wait for a part that almost fits, the genuine Makita Standard 2-Cutter - SDS-Plus Drill Bit 12mm x 600mm drops straight in and gets you back to work. ►...
    $14.18
    $22.50
    $14.18
  • Makita Sds-Plus Drilling Standard 2-Cutter - Sds-Plus Drill Bit 4mm X 160mm | SKU D-66612Makita - Standard 2-Cutter - SDS-Plus Drill Bit 4mm x 160mm | D-66612
    Makita - Standard 2-Cutter - SDS-Plus Drill Bit 4mm x 160mm | D-66612
    Standard 2-Cutter - SDS-Plus Drill Bit 4mm x 160mm | D-66612 When the job can’t wait for a part that almost fits, the genuine Makita Standard 2-Cutter - SDS-Plus Drill Bit 4mm x 160mm drops straight in and gets you back to work. ►...
    $2.92
    $4.60
    $2.92
  • Makita Sds-Plus Drilling 1/4 Hex Sleeve Chuck Bit Holder 80mm | SKU B-57548
    Makita - 1/4 Hex Sleeve Chuck Bit Holder 80mm | B-57548
    1/4 Hex Sleeve Chuck Bit Holder 80mm | B-57548 Keep your Makita gear running at full capacity with the genuine 1/4 Hex Sleeve Chuck Bit Holder 80mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into...
    $9.00
    $13.00
    $9.00
  • Makita - SDS-Plus Drill Bit 6 x 123mm Bradpoint Wood - 1Pc | B-57504Makita Sds-Plus Drilling Sds-Plus Drill Bit 6 X 123mm Bradpoint Wood - 1pc | SKU B-57504
    Makita - SDS-Plus Drill Bit 6 x 123mm Bradpoint Wood - 1Pc | B-57504
    SDS-Plus Drill Bit 6 x 123mm Bradpoint Wood - 1Pc | B-57504 Keep your Makita gear running at full capacity with the genuine SDS-Plus Drill Bit 6 x 123mm Bradpoint Wood - 1Pc, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key...
    $4.14
    $6.60
    $4.14

Why Buy From Industrial Shed?

Makita SDS-Plus accessories are essential for fast, accurate & reliable concrete drilling across demanding trade environments.

Industrial Shed supplies genuine accessories designed to improve drilling efficiency, reduce downtime & support professional construction performance.

For urgent requirements, take advantage of Same Day Dispatch. Ongoing support is available through Warranty & Parts Support.

✔ Genuine Makita accessories
✔ High-performance concrete drilling
✔ Durable SDS-Plus construction
✔ Improved speed & accuracy
✔ Fast Australia-wide dispatch
✔ Trade support available

From electrical installations & plumbing work through to structural anchoring & construction drilling, choose Makita SDS-Plus accessories designed for consistent, high-impact performance.

Frequently Asked Questions

What is SDS-Plus used for?

SDS-Plus systems are used for drilling & chiselling concrete, brick, stone & masonry materials.

Can SDS-Plus drill through reinforced concrete?

Yes, but performance depends on bit quality, reinforcement density & tool power.

What is the difference between SDS-Plus & SDS-Max?

SDS-Plus is for light to medium-duty drilling, while SDS-Max is used for heavy industrial drilling.

Why do SDS drill bits wear out?

Wear is caused by heat, incorrect pressure, rebar contact & general material hardness.

Can SDS bits be used in normal drills?

No — SDS bits require compatible rotary hammer systems.

Brands

Makita Accessories

Makita Accessories

►Makita Accessories | Sds-Plus Drilling & Accessories

Faster Concrete Drilling, Cleaner Holes & Reliable Trade Performance

Drilling into concrete, brick & masonry is one of the toughest tasks on any jobsite.

Whether you're installing anchors, running services, fixing structural components or completing fit-out work, SDS-Plus systems are designed to deliver high-impact drilling performance in hard materials. Makita SDS-Plus drilling & accessories are built to improve drilling speed, accuracy & durability across construction, electrical, plumbing & maintenance environments.

From small fixings through to heavy-duty masonry work, the right drilling accessories help reduce wear, improve penetration speed & maintain consistent hole quality.

Trades often pair SDS-Plus systems with Heavy-Duty Power Tools, Carpentry Tools & Fasteners & Metal Cutting & Grinding Tools.

What Are Makita SDS-Plus Drilling & Accessories?

Makita SDS-Plus accessories are high-impact drilling components designed for rotary hammer drills used in concrete, brick, stone & masonry applications.

Common accessory types include:

► SDS-Plus drill bits
► Masonry drill bits
► Chisels (flat, point, scaling)
► Dust extraction drilling accessories
► Depth stops & guides
► Extension rods
► Replacement hammer drilling components
► Genuine Makita SDS-Plus accessories

These accessories are engineered to handle high-impact forces while maintaining drilling accuracy & consistency.

Why Choose Makita SDS-Plus Accessories?

Concrete drilling requires consistent impact performance, heat resistance & durability under load.

Choosing the right SDS-Plus accessories helps improve:

► Drilling speed in concrete & masonry
► Hole accuracy & consistency
► Tool lifespan & durability
► Reduced operator fatigue
► Improved anchor installation quality
► Jobsite productivity

What Poor Drill Bit Selection Causes?

Incorrect or low-quality bits can lead to:

► Slower penetration
► Overheating & bit wear
► Drifting holes
► Cracked masonry
► Increased rework
► Reduced tool efficiency

Reliable SDS-Plus accessories help eliminate these issues on demanding sites.

Trades That Use SDS-Plus Systems Daily

► Builders
► Concreters
► Electricians
► Plumbers
► HVAC installers
► Civil construction teams
► Maintenance contractors
► Fit-out specialists

Common Applications

Concrete Anchoring & Fixing

Used for drilling holes for anchors, bolts, brackets & structural fixings.

Electrical Installations

Used for conduit fixing, wall chasing prep & mounting electrical systems.

Plumbing & Mechanical Work

Used for pipe brackets, penetrations & service installations into masonry surfaces.

Construction & Structural Work

Used for heavy-duty drilling into reinforced concrete, brick & stone materials.

Professionals working in masonry drilling workflows often also rely on:

► Metal Cutting & Grinding Tools
► Specialty Fasteners & Fixings
► Tool Storage & Workbenches
► Dust Extraction & Safety Gear

Product Selection Guide

Application

Recommended Accessory

Concrete drilling

SDS-Plus drill bit

Brick drilling

Masonry drill bit

Demolition/chiselling

Flat chisel

Breaking material

Point chisel

Dust control drilling

Dust extraction attachment

Deep drilling

Extension rod

Always match bit diameter, length & material rating to the application.

Expert Tips

Correct Bit Selection Prevents Drill Failure

Most SDS drilling issues come from incorrect bit usage rather than tool faults.

To improve performance:

► Let hammer action do the work
► Avoid excessive pressure
► Use sharp, high-quality bits
► Clear dust from holes regularly
► Match bit type to masonry hardness
► Replace worn bits early

Better bit selection improves drilling speed, accuracy & tool lifespan.

For broader jobsite reliability insights, see The Jobsite Doesn't Forgive. We Do..