►Makita Accessories | Sds-Plus Drilling & Accessories

Faster Concrete Drilling, Cleaner Holes & Reliable Trade Performance Drilling into concrete, brick & masonry is one of the toughest tasks on any jobsite. Whether you're installing anchors, running services, fixing structural components or completing fit-out work, SDS-Plus systems are designed to deliver high-impact drilling performance in hard materials. Makita...

Faster Concrete Drilling, Cleaner Holes & Reliable Trade Performance

Drilling into concrete, brick & masonry is one of the toughest tasks on any jobsite.

Whether you're installing anchors, running services, fixing structural components or completing fit-out work, SDS-Plus systems are designed to deliver high-impact drilling performance in hard materials. Makita SDS-Plus drilling & accessories are built to improve drilling speed, accuracy & durability across construction, electrical, plumbing & maintenance environments.

From small fixings through to heavy-duty masonry work, the right drilling accessories help reduce wear, improve penetration speed & maintain consistent hole quality.

Trades often pair SDS-Plus systems with Heavy-Duty Power Tools, Carpentry Tools & Fasteners & Metal Cutting & Grinding Tools.

What Are Makita SDS-Plus Drilling & Accessories?

Makita SDS-Plus accessories are high-impact drilling components designed for rotary hammer drills used in concrete, brick, stone & masonry applications.

Common accessory types include:

► SDS-Plus drill bits
► Masonry drill bits
► Chisels (flat, point, scaling)
► Dust extraction drilling accessories
► Depth stops & guides
► Extension rods
► Replacement hammer drilling components
► Genuine Makita SDS-Plus accessories

These accessories are engineered to handle high-impact forces while maintaining drilling accuracy & consistency.

Why Choose Makita SDS-Plus Accessories?

Concrete drilling requires consistent impact performance, heat resistance & durability under load.

Choosing the right SDS-Plus accessories helps improve:

► Drilling speed in concrete & masonry
► Hole accuracy & consistency
► Tool lifespan & durability
► Reduced operator fatigue
► Improved anchor installation quality
► Jobsite productivity

What Poor Drill Bit Selection Causes?

Incorrect or low-quality bits can lead to:

► Slower penetration
► Overheating & bit wear
► Drifting holes
► Cracked masonry
► Increased rework
► Reduced tool efficiency

Reliable SDS-Plus accessories help eliminate these issues on demanding sites.

Trades That Use SDS-Plus Systems Daily

► Builders
► Concreters
► Electricians
► Plumbers
► HVAC installers
► Civil construction teams
► Maintenance contractors
► Fit-out specialists

Common Applications

Concrete Anchoring & Fixing

Used for drilling holes for anchors, bolts, brackets & structural fixings.

Electrical Installations

Used for conduit fixing, wall chasing prep & mounting electrical systems.

Plumbing & Mechanical Work

Used for pipe brackets, penetrations & service installations into masonry surfaces.

Construction & Structural Work

Used for heavy-duty drilling into reinforced concrete, brick & stone materials.

Professionals working in masonry drilling workflows often also rely on:

► Metal Cutting & Grinding Tools
► Specialty Fasteners & Fixings
► Tool Storage & Workbenches
► Dust Extraction & Safety Gear

Product Selection Guide

Application

Recommended Accessory

Concrete drilling

SDS-Plus drill bit

Brick drilling

Masonry drill bit

Demolition/chiselling

Flat chisel

Breaking material

Point chisel

Dust control drilling

Dust extraction attachment

Deep drilling

Extension rod

Always match bit diameter, length & material rating to the application.

Expert Tips

Correct Bit Selection Prevents Drill Failure

Most SDS drilling issues come from incorrect bit usage rather than tool faults.

To improve performance:

► Let hammer action do the work
► Avoid excessive pressure
► Use sharp, high-quality bits
► Clear dust from holes regularly
► Match bit type to masonry hardness
► Replace worn bits early

Better bit selection improves drilling speed, accuracy & tool lifespan.

For broader jobsite reliability insights, see The Jobsite Doesn't Forgive. We Do..

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 10mm X 160mm | SKU B-46567
    Makita - V-PLUS SDS-Plus 2-Cutter 10mm x 160mm | B-46567
    V-PLUS SDS-Plus 2-Cutter 10mm x 160mm | B-46567 The Makita V-PLUS SDS-Plus 2-Cutter 10mm x 160mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features SDS-Plus shank...
    $5.94
    $10.30
    $5.94
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 10mm X 110mm | SKU B-46551
    Makita - V-PLUS SDS-Plus 2-Cutter 10mm x 110mm | B-46551
    V-PLUS SDS-Plus 2-Cutter 10mm x 110mm | B-46551 When the job can’t wait for a part that almost fits, the genuine Makita V-PLUS SDS-Plus 2-Cutter 10mm x 110mm drops straight in and gets you back to work. ► Key Features SDS-Plus shank locks directly...
    $5.31
    $9.20
    $5.31
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 9mm X 160mm | SKU B-47531
    Makita - V-PLUS SDS-Plus 2-Cutter 9mm x 160mm | B-47531
    V-PLUS SDS-Plus 2-Cutter 9mm x 160mm | B-47531 When the job can’t wait for a part that almost fits, the genuine Makita V-PLUS SDS-Plus 2-Cutter 9mm x 160mm drops straight in and gets you back to work. ► Key Features SDS-Plus shank locks directly...
    $6.75
    $11.70
    $6.75
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 8mm X 600mm | SKU B-47525
    Makita - V-PLUS SDS-Plus 2-Cutter 8mm x 600mm | B-47525
    V-PLUS SDS-Plus 2-Cutter 8mm x 600mm | B-47525 Keep your Makita gear running at full capacity with the genuine V-PLUS SDS-Plus 2-Cutter 8mm x 600mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into the hammer...
    $23.85
    $41.30
    $23.85
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 8mm X 460mm | SKU B-47519
    Makita - V-PLUS SDS-Plus 2-Cutter 8mm x 460mm | B-47519
    V-PLUS SDS-Plus 2-Cutter 8mm x 460mm | B-47519 When the job can’t wait for a part that almost fits, the genuine Makita V-PLUS SDS-Plus 2-Cutter 8mm x 460mm drops straight in and gets you back to work. ► Key Features SDS-Plus shank locks directly...
    $16.02
    $27.70
    $16.02
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 8mm X 400mm | SKU B-47503
    Makita - V-PLUS SDS-Plus 2-Cutter 8mm x 400mm | B-47503
    V-PLUS SDS-Plus 2-Cutter 8mm x 400mm | B-47503 The Makita V-PLUS SDS-Plus 2-Cutter 8mm x 400mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features SDS-Plus shank...
    $15.12
    $26.10
    $15.12
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 8mm X 310mm | SKU B-47494
    Makita - V-PLUS SDS-Plus 2-Cutter 8mm x 310mm | B-47494
    V-PLUS SDS-Plus 2-Cutter 8mm x 310mm | B-47494 Keep your Makita gear running at full capacity with the genuine V-PLUS SDS-Plus 2-Cutter 8mm x 310mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into the hammer...
    $10.08
    $17.40
    $10.08
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 8mm X 260mm | SKU B-47488
    Makita - V-PLUS SDS-Plus 2-Cutter 8mm x 260mm | B-47488
    V-PLUS SDS-Plus 2-Cutter 8mm x 260mm | B-47488 The Makita V-PLUS SDS-Plus 2-Cutter 8mm x 260mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features SDS-Plus shank...
    $7.83
    $13.50
    $7.83
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 8mm X 210mm | SKU B-47472
    Makita - V-PLUS SDS-Plus 2-Cutter 8mm x 210mm | B-47472
    V-PLUS SDS-Plus 2-Cutter 8mm x 210mm | B-47472 The Makita V-PLUS SDS-Plus 2-Cutter 8mm x 210mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features SDS-Plus shank...
    $6.75
    $11.60
    $6.75
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 8mm X 160mm | SKU B-46545
    Makita - V-PLUS SDS-Plus 2-Cutter 8mm x 160mm | B-46545
    V-PLUS SDS-Plus 2-Cutter 8mm x 160mm | B-46545 Keep your Makita gear running at full capacity with the genuine V-PLUS SDS-Plus 2-Cutter 8mm x 160mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into the hammer...
    $5.40
    $9.40
    $5.40
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 8mm X 110mm | SKU B-46539
    Makita - V-PLUS SDS-Plus 2-Cutter 8mm x 110mm | B-46539
    V-PLUS SDS-Plus 2-Cutter 8mm x 110mm | B-46539 The Makita V-PLUS SDS-Plus 2-Cutter 8mm x 110mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features SDS-Plus shank...
    $4.59
    $7.90
    $4.59
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 7mm X 210mm | SKU B-47450
    Makita - V-PLUS SDS-Plus 2-Cutter 7mm x 210mm | B-47450
    V-PLUS SDS-Plus 2-Cutter 7mm x 210mm | B-47450 When the job can’t wait for a part that almost fits, the genuine Makita V-PLUS SDS-Plus 2-Cutter 7mm x 210mm drops straight in and gets you back to work. ► Key Features SDS-Plus shank locks directly...
    $8.01
    $13.80
    $8.01
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 7mm X 250mm | SKU B-47466
    Makita - V-PLUS SDS-Plus 2-Cutter 7mm x 250mm | B-47466
    V-PLUS SDS-Plus 2-Cutter 7mm x 250mm | B-47466 When the job can’t wait for a part that almost fits, the genuine Makita V-PLUS SDS-Plus 2-Cutter 7mm x 250mm drops straight in and gets you back to work. ► Key Features SDS-Plus shank locks directly...
    $10.44
    $18.00
    $10.44
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 7mm X 160mm | SKU B-47444
    Makita - V-PLUS SDS-Plus 2-Cutter 7mm x 160mm | B-47444
    V-PLUS SDS-Plus 2-Cutter 7mm x 160mm | B-47444 Keep your Makita gear running at full capacity with the genuine V-PLUS SDS-Plus 2-Cutter 7mm x 160mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into the hammer...
    $5.40
    $9.40
    $5.40
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 7mm X 110mm | SKU B-47438
    Makita - V-PLUS SDS-Plus 2-Cutter 7mm x 110mm | B-47438
    V-PLUS SDS-Plus 2-Cutter 7mm x 110mm | B-47438 When the job can’t wait for a part that almost fits, the genuine Makita V-PLUS SDS-Plus 2-Cutter 7mm x 110mm drops straight in and gets you back to work. ► Key Features SDS-Plus shank locks directly...
    $4.59
    $8.00
    $4.59
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 6.5mm X 310mm | SKU B-47422
    Makita - V-PLUS SDS-Plus 2-Cutter 6.5mm x 310mm | B-47422
    V-PLUS SDS-Plus 2-Cutter 6.5mm x 310mm | B-47422 Keep your Makita gear running at full capacity with the genuine V-PLUS SDS-Plus 2-Cutter 6.5mm x 310mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into the hammer...
    $14.67
    $25.30
    $14.67
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 6.5mm X 260mm | SKU B-47416
    Makita - V-PLUS SDS-Plus 2-Cutter 6.5mm x 260mm | B-47416
    V-PLUS SDS-Plus 2-Cutter 6.5mm x 260mm | B-47416 The Makita V-PLUS SDS-Plus 2-Cutter 6.5mm x 260mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features SDS-Plus shank...
    $10.62
    $18.30
    $10.62
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 6.5mm X 210mm | SKU B-47400
    Makita - V-PLUS SDS-Plus 2-Cutter 6.5mm x 210mm | B-47400
    V-PLUS SDS-Plus 2-Cutter 6.5mm x 210mm | B-47400 The Makita V-PLUS SDS-Plus 2-Cutter 6.5mm x 210mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features SDS-Plus shank...
    $7.92
    $13.70
    $7.92
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 6.5mm X 160mm | SKU B-47391
    Makita - V-PLUS SDS-Plus 2-Cutter 6.5mm x 160mm | B-47391
    V-PLUS SDS-Plus 2-Cutter 6.5mm x 160mm | B-47391 Keep your Makita gear running at full capacity with the genuine V-PLUS SDS-Plus 2-Cutter 6.5mm x 160mm, in stock at Industrial Shed and dispatched fast Australia-wide. ► Key Features SDS-Plus shank locks directly into the hammer...
    $6.03
    $10.40
    $6.03
  • Makita Sds-Plus Drilling V-Plus Sds-Plus 2-Cutter 6.5mm X 110mm | SKU B-47385
    Makita - V-PLUS SDS-Plus 2-Cutter 6.5mm x 110mm | B-47385
    V-PLUS SDS-Plus 2-Cutter 6.5mm x 110mm | B-47385 The Makita V-PLUS SDS-Plus 2-Cutter 6.5mm x 110mm is the genuine article — made to the same standard as the tool it fits, and priced 10% under RRP at Industrial Shed. ► Key Features SDS-Plus shank...
    $5.13
    $8.80
    $5.13

Why Buy From Industrial Shed?

Makita SDS-Plus accessories are essential for fast, accurate & reliable concrete drilling across demanding trade environments.

Industrial Shed supplies genuine accessories designed to improve drilling efficiency, reduce downtime & support professional construction performance.

For urgent requirements, take advantage of Same Day Dispatch. Ongoing support is available through Warranty & Parts Support.

✔ Genuine Makita accessories
✔ High-performance concrete drilling
✔ Durable SDS-Plus construction
✔ Improved speed & accuracy
✔ Fast Australia-wide dispatch
✔ Trade support available

From electrical installations & plumbing work through to structural anchoring & construction drilling, choose Makita SDS-Plus accessories designed for consistent, high-impact performance.

Frequently Asked Questions

SDS-Plus systems are used for drilling & chiselling concrete, brick, stone & masonry materials.

Yes, but performance depends on bit quality, reinforcement density & tool power.

SDS-Plus is for light to medium-duty drilling, while SDS-Max is used for heavy industrial drilling.

Wear is caused by heat, incorrect pressure, rebar contact & general material hardness.

No — SDS bits require compatible rotary hammer systems.

Brands

Makita Accessories

Makita Accessories