Controlled Oil Transfer & Dispensing for Trade & Industrial Applications

Shop Macnaught Oil Accessories for professional oil transfer, dispensing, measurement, extraction & workshop fluid-handling setups across Australian automotive, fleet, agricultural & industrial maintenance environments.

The range supports Macnaught oil equipment with practical components for moving oil from storage through to the point of use. Depending on the application, that can include oil feeder hoses, remote suction kits, measuring jugs, funnels, nozzle extensions, evacuation valves, oil extractors, bung adaptors, wall-mount kits, filters, regulators & workshop dispensing accessories.

Correct selection starts with the oil equipment model, fluid application, pump ratio, hose specification, BSP connection, pressure rating & installation layout.

Where the requirement is for the pump itself rather than supporting equipment, Macnaught Electric Pumps provides a direct pathway into powered oil-transfer equipment.

What Are Macnaught Oil Accessories?

Macnaught Oil Accessories are supporting components used to configure, connect, measure, transfer, extract & dispense oil through compatible workshop fluid-handling equipment.

Macnaught's current Australian oil accessory range includes equipment such as:

► Oil feeder hoses
► Remote suction kits
► Telescopic suction tubes
► Oil measuring jugs
► Universal clamping funnels
► Top-up pump bottles
► Oil bar taps
► Oil cans
► Oil extractors
► Pneumatic & manual extractors
► 4-way evacuation valves
► Rigid dispensing extensions
► Non-drip nozzles
► Bung adaptors
► Wall-mount & pipe adaptor kits
► Air lubricator kits
► Filter & regulator kits
► In-line filters & strainers

The collection therefore covers several stages of workshop oil handling rather than one single function.

Some accessories help move lubricant from a drum or IBC towards the pump.

Others support the delivery side of the system.

Measuring jugs, funnels & top-up equipment provide another route for controlled smaller-volume handling.

For broader supporting Macnaught equipment beyond oil handling, Macnaught Accessories provides the wider brand accessory collection.

Why Choose Macnaught Oil Accessories?

An oil pump doesn't operate in isolation.

A professional oil-handling system can require the correct suction equipment, feeder hose, mounting arrangement, filtration, dispensing nozzle plus connection hardware before oil reaches the machine cleanly & efficiently.

Matching these components correctly can help create a more practical workshop setup.

► Purpose-built oil handling – accessories cover transfer, dispensing, measurement & extraction requirements
► Pump setup options – suction kits, adaptors plus feeder hoses support compatible Macnaught installations
► Oil measurement – measuring jugs support controlled workshop fluid quantities
► Cleaner filling – funnels plus dispensing extensions can improve access to machine fill points
► Oil extraction – dedicated equipment supports removal of used oil from compatible applications
► Remote pump installations – suction kits provide options where the pump isn't mounted directly on the oil container
► Air preparation – filter, regulator plus lubricator equipment supports compatible pneumatic pump setups
► Multiple BSP connections – selected accessories are available across different thread sizes
► Workshop configuration – mounting kits plus adaptors allow compatible oil equipment to be positioned around the work area

The correct accessory should always follow the equipment specification.

A hose or adaptor that physically connects isn't automatically suitable for the oil, pressure or pump configuration.

Common Applications

Macnaught Oil Accessories support fluid handling across workshops where oils need to be stored, transferred, measured, dispensed or removed during servicing.

Common applications include:

► Automotive servicing
► Fleet workshops
► Heavy-vehicle maintenance
► Agricultural machinery
► Earthmoving equipment
► Construction machinery
► Manufacturing facilities
► Industrial plant
► Gearbox servicing
► Hydraulic oil handling
► Engine oil servicing
► Transmission fluid handling
► Workshop oil transfer
► Bulk lubricant storage
► Drum-mounted pump systems
► IBC oil systems
► Used-oil extraction
► Machinery top-ups
► Preventative maintenance
► Mobile service operations

The right setup depends on whether oil is moving into equipment, between containers or out of machinery during servicing.

For mechanical workshops building a wider servicing setup, Automotive & Mechanical provides a relevant cross-sell into professional workshop equipment.

Technicians interested in real Australian workshop practices can also read A Day With An Automotive Mechanic Peninsula.

Product Selection Guide

Oil accessories need to match the complete fluid-handling system.

Start with the oil plus equipment rather than selecting from connection appearance.

1. Identify the oil-handling task

Determine exactly what the accessory needs to do.

Typical requirements include:

► Draw oil from a drum
► Draw oil from an IBC
► Connect a remote pump
► Feed oil towards dispensing equipment
► Filter oil during transfer
► Regulate a pneumatic pump
► Measure a known oil quantity
► Top up machinery
► Reach a difficult filler opening
► Extract used oil
► Control oil evacuation
► Mount a pump away from the container

This immediately narrows the equipment required.

2. Identify the Macnaught equipment

Record the exact:

► Pump model
► Equipment family
► Product cod
► Pump ratio
► Inlet connection
► Outlet connection
► Existing hose specification
► Fluid application

Accessories designed for one Macnaught pump family shouldn't automatically be assumed compatible with another.

3. Match the pump ratio

Feeder hoses can have different pressure requirements depending on the pump system.

Macnaught's current oil accessory range includes the TD-25K oil feeder hose for compatible 3:1 R-Series™ & OILMASTER® pumps.

The TB-20K high-pressure feeder hose is designed for compatible 5:1 plus 10:1 R-Series™ & OILMASTER® pumps.

That distinction matters.

The accessory needs to match the pressure generated within the system rather than simply fitting the available thread.

4. Check hose specifications

Before selecting an oil hose, confirm:

► Hose length
► Internal diameter
► Working pressure
► Fluid compatibility
► Inlet thread
► Outlet thread
► Swivel configuration
► Pump ratio
► Installation layout

Macnaught's TD-25K plus TB-20K feeder hoses are both approximately 3m long but carry different pressure specifications for their intended pump applications.

5. Match the BSP connection

Macnaught oil accessories use multiple BSP sizes.

Current equipment includes configurations across:

► 1/4" connections
► 1/2" connections
► 3/4" BSP
► 1" BSP
► 1 1/2" BSP
► 2" BSP adaptors

Always confirm:

► Thread size
► Male or female connection
► Thread standard
► Equipment specification

before ordering.

Don't force a fitting that doesn't engage correctly.

6. Choose the correct suction setup

Oil pumps need reliable access to the lubricant supply.

Macnaught provides remote suction options for:

► Drum installations
► IBC installations

Remote suction equipment becomes useful where the pump can't or shouldn't be mounted directly onto the storage container.

Consider:

► Pump location
► Container location
► Suction distance
► Hose routing
► Oil viscosity
► Required flow
► Pump specification
► Workshop layout

For broader manual oil-transfer requirements, Macnaught Manual Oil provides a relevant cross-sell into hand-operated oil equipment.

7. Select measuring & filling equipment

Not every oil-handling job requires a pump.

Smaller workshop fills can be handled using appropriately selected:

► Measuring jugs
► Oil cans
► Funnels
► Top-up bottles

Macnaught's current range includes Lubemate measuring jugs across multiple capacities including 600ml, 2L plus 5L options, with combination sets also available.

Choose capacity around the actual fill volume.

A smaller measuring jug can improve control during precise top-ups while larger capacities reduce repeated refilling during higher-volume servicing.

8. Choose oil extraction equipment

Oil servicing isn't only about putting lubricant into machinery.

Used oil also needs to be removed.

Macnaught's current accessory range includes manual plus pneumatic oil extraction equipment for compatible workshop applications.

Before selecting extraction equipment, check:

► Fluid suitability
► Capacity
► Extraction method
► Machine access
► Operating temperature
► Hose requirements
► Disposal process

Used oil should be handled according to workplace plus environmental requirements.

Expert Tips for Workshop Oil Handling

Oil cleanliness plus correct identification matter from bulk storage through to the machine.

► Identify every lubricant. Don't transfer oil from an unmarked container.
► Match hoses to pump ratio. Higher-pressure systems need appropriately rated delivery components.
► Keep funnels clean. An open workshop funnel can collect dust, swarf plus debris.
► Use dedicated measuring equipment where practical. This helps reduce lubricant mixing.
► Check BSP threads before assembly. Don't rely on visual similarity.
► Inspect feeder hoses. Look for abrasion, cracking, leakage plus damaged fittings.
► Keep suction components clean. Contamination entering at the drum can travel through the entire system.
► Use filtration where required. Fine contamination can affect both equipment plus the machinery receiving the oil.
► Check pneumatic air preparation. Air-operated pumps need an appropriate compressed-air setup.
► Avoid overfilling. Measure the required lubricant volume according to the machine specification.
► Control used oil. Keep extracted lubricant separate from clean oil-handling equipment.
► Record recurring oil-system faults. Repeated leakage or pressure issues deserve diagnosis rather than continual component replacement.

For workshops maintaining fluid-handling equipment, Tool Maintenance Kit provides another relevant cross-sell into workshop maintenance equipment.

Industrial Shed's Tool & Equipment Care also provides a supporting service pathway for frequently used workshop equipment.

Oil Feeder Hoses & Remote Suction Kits

Feeder hoses plus remote suction equipment solve different sides of an oil-transfer installation.

A remote suction kit allows compatible pumps to draw oil from a drum or IBC when direct pump mounting isn't the preferred arrangement.

A feeder hose transfers oil within the compatible dispensing system.

Macnaught's current range includes dedicated:

► Drum remote suction kits
► IBC remote suction kits
► Telescopic suction tubes
► 3:1 oil feeder hoses
► Higher-pressure feeder hoses for compatible 5:1 plus 10:1 systems

Correct selection depends on the pump plus installation.

Check:

► Pump model
► Pump ratio
► Suction arrangement
► Hose pressure rating
► Thread configuration
► Oil viscosity
► Required flow
► Storage-container type

A hose shouldn't be upgraded or substituted based purely on pressure rating without confirming system compatibility.

Measuring Jugs, Funnels & Oil Top-Up Equipment

Smaller-volume oil handling still deserves controlled equipment.

Measuring jugs help technicians dispense known lubricant quantities while funnels improve access to filler openings.

Macnaught's current range includes Lubemate measuring equipment plus a universal clamping funnel & 1L top-up pump bottle.

These accessories can support:

► Engine oil top-ups
► Gearbox servicing
► Transmission servicing
► Hydraulic reservoir filling
► Workshop lubricant measurement
► Machinery maintenance
► Controlled oil transfer

Keep measuring equipment identified where multiple lubricants are used.

Colour or visual identification can help but written lubricant identification provides stronger control.

For workshops wanting a more structured colour-coded oil-management system, Macnaught Lubemate Oil Can provides the more focused pathway.

Oil Nozzles & Dispensing Extensions

The final oil-dispensing point needs to suit the machine being serviced.

Macnaught's oil accessory range includes rigid plus flexible extension options along with manual plus automatic non-drip nozzle configurations for compatible oil control guns.

These accessories can help when filler openings are:

► Recessed
► Difficult to access
► Positioned behind surrounding components
► Better approached through a flexible extension
► Better suited to rigid dispensing control

Non-drip nozzle designs can also help control oil at the dispensing end once delivery stops.

Choose the extension according to:

► Compatible control gun
► Required reach
► Filler access
► Connection type
► Oil application
► Nozzle requirement

Don't modify or improvise an extension where a correctly specified component is available.

Oil Extraction & Evacuation Accessories

Used-oil removal is an important part of workshop fluid handling.

Macnaught's current range includes equipment such as:

► Manual oil extractors
► Pneumatic/manual oil extractors
► Waste-oil extractors
► 4-way evacuation valves

Evacuation valves are currently available in multiple BSP sizes including 3/4", 1" plus 1 1/2" configurations.

The correct extraction setup depends on:

► Workshop servicing volume
► Oil quantity
► Equipment access
► Extraction method
► Hose size
► Valve configuration
► Waste-oil storage
► Workplace procedures

Clean-oil dispensing equipment plus used-oil extraction equipment should remain clearly separated.

For broader workshop chemical-management knowledge, How to Read a Safety Data Sheet - A Quick Guide for Workshop Operators provides relevant supporting guidance.

Air Preparation for Pneumatic Oil Pumps

Air-operated oil pumps depend on the quality plus control of their compressed-air supply.

Macnaught's accessory range includes:

► Air lubricator kits
► Filter plus regulator kits
► On/off air valve sets

These components serve different functions within a pneumatic installation.

A filter can help manage contamination in the incoming air.

A regulator controls supplied air pressure.

A lubricator provides lubrication where required by compatible pneumatic equipment.

An isolation valve allows air supply control around servicing or shutdown procedures.

Always follow the pump's specific installation requirements.

Don't assume every pneumatic pump needs exactly the same air-preparation arrangement.

Oil Accessories vs Oil Pumps vs Spare Parts

Keeping these categories separate makes product selection easier while strengthening search intent.

Choose Macnaught Oil Accessories when you need supporting equipment such as:

► Feeder hoses
► Suction kits
► Funnels
► Measuring jugs
► Oil nozzles
► Extensions
► Evacuation valves
► Pump mounting equipment
► Air-preparation equipment

Choose Macnaught Oil Pumps when the requirement is the actual equipment moving oil from storage.

Choose Macnaught Spare Parts when repairing existing Macnaught equipment with items such as:

► Seal kits
► Overhaul kits
► Replacement assemblies
► Internal pump components
► Service components

This distinction prevents an accessory collection from competing unnecessarily with pump plus repair intent.

For broader preventative-maintenance guidance, Winter-Proofing Your Tools: Maintenance Tips for the Cold Months provides additional trade-focused reading.