► Knipex | Screws & Nuts

Replacement Adjustment Parts for Precise Wire Stripping A damaged adjustment screw can turn a reliable pair of insulation strippers into a frustrating tool. When the stripping opening will not hold its setting, the result may be incomplete insulation removal, inconsistent cuts or unnecessary damage to conductor strands. KNIPEX screws &...

Replacement Adjustment Parts for Precise Wire Stripping

A damaged adjustment screw can turn a reliable pair of insulation strippers into a frustrating tool. When the stripping opening will not hold its setting, the result may be incomplete insulation removal, inconsistent cuts or unnecessary damage to conductor strands. KNIPEX screws & nuts in this collection address a specific maintenance requirement: replacing the adjustment hardware on compatible KNIPEX manual insulation strippers.

Industrial Shed currently lists the KNIPEX 11 09 01 knurled screw & nut spare-parts set, intended for the manufacturer's 11 XX 160 insulation stripper family. For related electrical hand tools, explore Pliers. Technicians building a broader installation kit can also browse Screwdrivers.

What Are KNIPEX Screws & Nuts?

This collection contains specialist replacement hardware for a KNIPEX insulation stripper adjustment mechanism. The knurled screw controls the opening of the stripping jaws, allowing the operator to set the tool for the insulation being removed. A matching lock nut secures that adjustment so the opening remains consistent during repeated stripping operations.

Unlike ordinary workshop screws, the KNIPEX 11 09 01 performs a defined mechanical function inside a hand tool. Its thread, length & locking arrangement must match the original components. Substituting an approximately sized fastener can affect adjustment movement or prevent the locking mechanism from working correctly.

Understanding the Adjustment Mechanism

Manual insulation strippers rely on a controlled cutting opening to remove insulation without unnecessarily damaging the conductor beneath it. Turning the knurled screw changes the jaw setting, while the lock nut helps maintain the selected position. This adjustment becomes particularly important when moving between conductors with different insulation thicknesses or constructions.

A correct setting should remove the insulation cleanly without leaving excessive material behind or marking the metal conductor. The tool's operating range & the cable manufacturer's requirements still determine which conductors are suitable.

Why Choose KNIPEX Screws & Nuts?

Repair the Adjustment Hardware Instead of Replacing a Serviceable Tool

When the original stripper remains mechanically sound, replacing a damaged or missing adjustment screw may be more practical than purchasing another complete tool. This approach is especially relevant where the cutting edges, handles & jaw alignment remain in good condition. The manufacturer-identified spare provides a clearer repair option than attempting to adapt generic hardware.

However, replacing the screw will not correct worn blades, bent jaws or damage elsewhere in the tool. Inspect the complete stripper before deciding whether a component replacement is sufficient.

Maintain Consistent Stripping Results

Repeated cable preparation depends on a stable jaw setting. If the lock nut is missing or damaged, the adjustment may move during use, leading to inconsistent insulation removal. The correct replacement components help restore the mechanism intended to hold the chosen opening.

Consistency is particularly important where conductors will be terminated into equipment requiring clean, undamaged wire ends. Each stripped conductor should still be inspected before termination.

Identify the Correct Part by Manufacturer Number

KNIPEX identifies the replacement set as 11 09 01 for its 11 XX 160 universal insulation stripper family. This gives maintenance buyers a precise reference when ordering spare parts for an existing tool. It is more reliable than selecting hardware according to appearance or approximate dimensions.

Similar-looking adjustment screws from other KNIPEX models should not be assumed interchangeable. Confirm the stripper model before purchasing.

Common Applications

Electrical Installation Tool Maintenance

Electrical installers frequently prepare conductors for terminals, control equipment & associated electrical components. A properly adjusted manual stripper helps remove insulation without unnecessary damage to the conductor. When the adjustment hardware becomes unreliable, the tool may no longer produce consistent results.

Replacing the correct screw & nut can restore the intended setting mechanism, provided the rest of the tool remains serviceable. After fitting the spare, test the stripper on suitable sample wire before returning it to normal use.

Switchboard & Control Cabinet Work

Control cabinet maintenance can involve repeated preparation of conductors with similar dimensions. A secure adjustment setting reduces the need to reset the stripping opening between operations. If the lock nut no longer holds the setting, technicians may notice changing stripping results even though the cutting edges appear undamaged.

This makes the adjustment mechanism an important inspection point during tool maintenance. Electrical work must still follow applicable isolation, testing & safety procedures.

Workshop Repair & Spare-Parts Management

Workshops maintaining several identical hand tools benefit from keeping accurate part-number records. A small adjustment screw can easily become separated from its original tool, particularly during cleaning or servicing. Labelling the replacement set with the compatible stripper family helps prevent incorrect installation.

For storing tools awaiting inspection or repair, explore Tool Storage. Keeping damaged equipment separate from serviceable tools also supports a more reliable maintenance process.

Apprentice Training & Cable Preparation

Understanding why a stripper needs adjustment is as important as learning how to operate it. Apprentices should recognise the relationship between insulation diameter, jaw opening & conductor damage. A properly functioning adjustment mechanism allows these principles to be demonstrated using suitable sample wire.

The article The Apprentice's First Tool Kit: What You Actually Need provides broader guidance on selecting practical trade equipment.

Product Selection Guide

KNIPEX 11 09 01 – Knurled Screw & Nut Spare-Parts Set

The collection currently contains one replacement component set. Its purpose is to restore the adjustment hardware on compatible KNIPEX universal insulation strippers.

Product detail

Specification

Manufacturer

KNIPEX

Part number

11 09 01

Product type

Replacement knurled screw & lock nut

Compatible tool family

KNIPEX 11 XX 160

Manufacturer EAN

4003773052326

Listed weight

6 g

Function

Stripping-jaw adjustment & setting retention

The spare part's physical dimensions are not a substitute for checking the manufacturer's compatibility information.

Confirm the Stripper Model Before Ordering

The KNIPEX 11 XX 160 family includes different variants of the manufacturer's universal insulation strippers. Individual models may differ in handle design or surface finish while sharing the specified adjustment spare. Buyers should identify the original tool by its manufacturer marking wherever possible.

If the model number is unreadable, compare the tool with official KNIPEX documentation before ordering. Handle colour alone is not a reliable compatibility check.

Diagnose the Fault Before Replacing the Part

A missing lock nut, damaged thread or bent knurled screw can prevent the adjustment from working normally. By contrast, a stripper that leaves ragged insulation or damages conductors may have worn cutting edges, incorrect settings or other mechanical problems. These faults require different corrective action.

Start by checking whether the screw turns smoothly, whether the lock nut holds its position & whether the jaws respond consistently. If the adjustment hardware is intact, investigate the rest of the tool before purchasing a spare.

Repair or Replace: Which Is Appropriate?

Tool condition

Recommended assessment

Missing adjustment screw

Check compatibility with KNIPEX 11 09 01

Damaged or missing lock nut

Check the replacement set

Adjustment threads visibly damaged

Inspect mating components before repair

Worn stripping blades

Assess the complete tool

Bent jaws or distorted mechanism

Remove from service for further assessment

Damaged insulation on a rated tool

Follow manufacturer inspection or replacement requirements

A replacement screw should only be fitted where the original tool remains suitable for continued use.

Understand the Original Tool's Capacity

The KNIPEX 11 01 160 universal insulation stripper is specified for suitable single, multi-strand & fine-stranded conductors with plastic or rubber insulation, within its stated diameter & cross-section limits. The adjustment screw allows the tool to be set within that operating range. It does not increase the manufacturer's maximum conductor capacity.

Check the specifications of the exact stripper model before use. For other electrical preparation equipment, browse Cutting Tools.

Store Replacement Components Separately

Small adjustment parts are easily confused with ordinary workshop hardware. Keep the spare set in labelled packaging until required, particularly where several KNIPEX tool families are maintained. This reduces the chance of fitting an incorrect screw simply because it appears similar.

For organising small components, Portable Organisers provide practical storage options. General-purpose Bolts & Fasteners should remain separate from manufacturer-specific tool spares.

Expert Tips

Check Thread Condition Before Installation

A damaged screw may indicate wear or damage in the mating adjustment mechanism. Inspect the threads for distortion, contamination & signs of cross-threading before fitting the replacement. Forcing a new screw into damaged threads can create additional problems.

The replacement should engage smoothly using the method specified by KNIPEX. Stop if unusual resistance occurs.

Test the Adjustment With Suitable Wire

After replacement, set the stripper using sample conductor material within the tool's rated range. Adjust the opening gradually & inspect the stripped conductor for nicks, damaged strands or remaining insulation. Once the correct setting is established, secure the lock nut & repeat the test.

Different insulation constructions may require different settings even where conductor sizes appear similar.

Avoid Over-Tightening the Lock Nut

The lock nut is intended to hold the selected adjustment, not to withstand excessive tightening force. Applying unnecessary pressure can damage the threads or make future adjustment difficult. Follow the manufacturer's guidance & confirm that the setting remains stable during ordinary operation.

If the nut repeatedly loosens, check the condition & compatibility of the components rather than adding improvised locking materials.

Keep the Mechanism Clean

Cable insulation fragments, workshop dust & residue can accumulate around stripping jaws & adjustment components. Cleaning these areas helps maintain normal movement & makes damage easier to identify. Use methods suitable for the tool's materials & any applicable insulation rating.

For general maintenance supplies, explore Tool Maintenance & Cleaning Kits. The article How to Clean Your Gear Without Ruining It provides additional equipment-care guidance.

Never Substitute an Approximate Screw

A generic fastener may appear to fit while having a different thread pitch, head shape or usable length. Such differences can interfere with the intended adjustment mechanism. Use the manufacturer-specified component for compatible tools.

For ordinary installation hardware rather than tool repairs, browse Screws & Anchors.

Why Buy From Industrial Shed?

Industrial Shed supplies professional hand tools & replacement accessories from Somerville on Victoria's Mornington Peninsula. This collection provides the manufacturer-identified KNIPEX 11 09 01 adjustment spare for buyers maintaining compatible universal insulation strippers. Accurate part identification helps avoid purchasing unsuitable generic hardware or replacing an otherwise serviceable tool unnecessarily.

For assistance with manufacturer-related product issues, review Warranty & Parts Support. Australian ordering & delivery information is available through Shipping & Delivery.

Replace the Faulty Adjustment Part With the Correct Spare

Before ordering, identify your KNIPEX stripper model & inspect the adjustment mechanism. If the tool is otherwise serviceable & the fault relates to the screw or lock nut, the correct replacement set may restore normal adjustment.

Keep a compatible KNIPEX stripper working accurately. Match your tool to part 11 09 01 & order the replacement screw & nut from Industrial Shed.

Frequently Asked Questions

Which KNIPEX tools use the 11 09 01 spare?

KNIPEX specifies part 11 09 01 for its 11 XX 160 universal insulation stripper family. Confirm the original tool model before ordering.

Does the set contain both the screw & nut?

Yes. It is identified as a replacement screw & nut set for the compatible adjustment mechanism.

Can this part repair a stripper that damages wire strands?

Only if the problem is caused by faulty adjustment hardware. Incorrect settings, worn blades or other tool damage may require separate attention.

How can I identify a faulty adjustment screw?

Look for damaged threads, difficult adjustment, a missing lock nut or a setting that will not remain secure. Inspect the complete mechanism before replacing parts.

Will the spare fit every 160 mm KNIPEX stripper?

No. Compatibility is specified for the 11 XX 160 family. Other 160 mm models should not be assumed compatible.

Does replacing the screw change the stripping capacity?

No. The tool retains its original manufacturer-specified operating range.

Brands

► Knipex | Screws & Nuts

Replacement Adjustment Parts for Precise Wire Stripping

A damaged adjustment screw can turn a reliable pair of insulation strippers into a frustrating tool. When the stripping opening will not hold its setting, the result may be incomplete insulation removal, inconsistent cuts or unnecessary damage to conductor strands. KNIPEX screws & nuts in this collection address a specific maintenance requirement: replacing the adjustment hardware on compatible KNIPEX manual insulation strippers.

Industrial Shed currently lists the KNIPEX 11 09 01 knurled screw & nut spare-parts set, intended for the manufacturer's 11 XX 160 insulation stripper family. For related electrical hand tools, explore Pliers. Technicians building a broader installation kit can also browse Screwdrivers.

What Are KNIPEX Screws & Nuts?

This collection contains specialist replacement hardware for a KNIPEX insulation stripper adjustment mechanism. The knurled screw controls the opening of the stripping jaws, allowing the operator to set the tool for the insulation being removed. A matching lock nut secures that adjustment so the opening remains consistent during repeated stripping operations.

Unlike ordinary workshop screws, the KNIPEX 11 09 01 performs a defined mechanical function inside a hand tool. Its thread, length & locking arrangement must match the original components. Substituting an approximately sized fastener can affect adjustment movement or prevent the locking mechanism from working correctly.

Understanding the Adjustment Mechanism

Manual insulation strippers rely on a controlled cutting opening to remove insulation without unnecessarily damaging the conductor beneath it. Turning the knurled screw changes the jaw setting, while the lock nut helps maintain the selected position. This adjustment becomes particularly important when moving between conductors with different insulation thicknesses or constructions.

A correct setting should remove the insulation cleanly without leaving excessive material behind or marking the metal conductor. The tool's operating range & the cable manufacturer's requirements still determine which conductors are suitable.

Why Choose KNIPEX Screws & Nuts?

Repair the Adjustment Hardware Instead of Replacing a Serviceable Tool

When the original stripper remains mechanically sound, replacing a damaged or missing adjustment screw may be more practical than purchasing another complete tool. This approach is especially relevant where the cutting edges, handles & jaw alignment remain in good condition. The manufacturer-identified spare provides a clearer repair option than attempting to adapt generic hardware.

However, replacing the screw will not correct worn blades, bent jaws or damage elsewhere in the tool. Inspect the complete stripper before deciding whether a component replacement is sufficient.

Maintain Consistent Stripping Results

Repeated cable preparation depends on a stable jaw setting. If the lock nut is missing or damaged, the adjustment may move during use, leading to inconsistent insulation removal. The correct replacement components help restore the mechanism intended to hold the chosen opening.

Consistency is particularly important where conductors will be terminated into equipment requiring clean, undamaged wire ends. Each stripped conductor should still be inspected before termination.

Identify the Correct Part by Manufacturer Number

KNIPEX identifies the replacement set as 11 09 01 for its 11 XX 160 universal insulation stripper family. This gives maintenance buyers a precise reference when ordering spare parts for an existing tool. It is more reliable than selecting hardware according to appearance or approximate dimensions.

Similar-looking adjustment screws from other KNIPEX models should not be assumed interchangeable. Confirm the stripper model before purchasing.

Common Applications

Electrical Installation Tool Maintenance

Electrical installers frequently prepare conductors for terminals, control equipment & associated electrical components. A properly adjusted manual stripper helps remove insulation without unnecessary damage to the conductor. When the adjustment hardware becomes unreliable, the tool may no longer produce consistent results.

Replacing the correct screw & nut can restore the intended setting mechanism, provided the rest of the tool remains serviceable. After fitting the spare, test the stripper on suitable sample wire before returning it to normal use.

Switchboard & Control Cabinet Work

Control cabinet maintenance can involve repeated preparation of conductors with similar dimensions. A secure adjustment setting reduces the need to reset the stripping opening between operations. If the lock nut no longer holds the setting, technicians may notice changing stripping results even though the cutting edges appear undamaged.

This makes the adjustment mechanism an important inspection point during tool maintenance. Electrical work must still follow applicable isolation, testing & safety procedures.

Workshop Repair & Spare-Parts Management

Workshops maintaining several identical hand tools benefit from keeping accurate part-number records. A small adjustment screw can easily become separated from its original tool, particularly during cleaning or servicing. Labelling the replacement set with the compatible stripper family helps prevent incorrect installation.

For storing tools awaiting inspection or repair, explore Tool Storage. Keeping damaged equipment separate from serviceable tools also supports a more reliable maintenance process.

Apprentice Training & Cable Preparation

Understanding why a stripper needs adjustment is as important as learning how to operate it. Apprentices should recognise the relationship between insulation diameter, jaw opening & conductor damage. A properly functioning adjustment mechanism allows these principles to be demonstrated using suitable sample wire.

The article The Apprentice's First Tool Kit: What You Actually Need provides broader guidance on selecting practical trade equipment.

Product Selection Guide

KNIPEX 11 09 01 – Knurled Screw & Nut Spare-Parts Set

The collection currently contains one replacement component set. Its purpose is to restore the adjustment hardware on compatible KNIPEX universal insulation strippers.

Product detail

Specification

Manufacturer

KNIPEX

Part number

11 09 01

Product type

Replacement knurled screw & lock nut

Compatible tool family

KNIPEX 11 XX 160

Manufacturer EAN

4003773052326

Listed weight

6 g

Function

Stripping-jaw adjustment & setting retention

The spare part's physical dimensions are not a substitute for checking the manufacturer's compatibility information.

Confirm the Stripper Model Before Ordering

The KNIPEX 11 XX 160 family includes different variants of the manufacturer's universal insulation strippers. Individual models may differ in handle design or surface finish while sharing the specified adjustment spare. Buyers should identify the original tool by its manufacturer marking wherever possible.

If the model number is unreadable, compare the tool with official KNIPEX documentation before ordering. Handle colour alone is not a reliable compatibility check.

Diagnose the Fault Before Replacing the Part

A missing lock nut, damaged thread or bent knurled screw can prevent the adjustment from working normally. By contrast, a stripper that leaves ragged insulation or damages conductors may have worn cutting edges, incorrect settings or other mechanical problems. These faults require different corrective action.

Start by checking whether the screw turns smoothly, whether the lock nut holds its position & whether the jaws respond consistently. If the adjustment hardware is intact, investigate the rest of the tool before purchasing a spare.

Repair or Replace: Which Is Appropriate?

Tool condition

Recommended assessment

Missing adjustment screw

Check compatibility with KNIPEX 11 09 01

Damaged or missing lock nut

Check the replacement set

Adjustment threads visibly damaged

Inspect mating components before repair

Worn stripping blades

Assess the complete tool

Bent jaws or distorted mechanism

Remove from service for further assessment

Damaged insulation on a rated tool

Follow manufacturer inspection or replacement requirements

A replacement screw should only be fitted where the original tool remains suitable for continued use.

Understand the Original Tool's Capacity

The KNIPEX 11 01 160 universal insulation stripper is specified for suitable single, multi-strand & fine-stranded conductors with plastic or rubber insulation, within its stated diameter & cross-section limits. The adjustment screw allows the tool to be set within that operating range. It does not increase the manufacturer's maximum conductor capacity.

Check the specifications of the exact stripper model before use. For other electrical preparation equipment, browse Cutting Tools.

Store Replacement Components Separately

Small adjustment parts are easily confused with ordinary workshop hardware. Keep the spare set in labelled packaging until required, particularly where several KNIPEX tool families are maintained. This reduces the chance of fitting an incorrect screw simply because it appears similar.

For organising small components, Portable Organisers provide practical storage options. General-purpose Bolts & Fasteners should remain separate from manufacturer-specific tool spares.

Expert Tips

Check Thread Condition Before Installation

A damaged screw may indicate wear or damage in the mating adjustment mechanism. Inspect the threads for distortion, contamination & signs of cross-threading before fitting the replacement. Forcing a new screw into damaged threads can create additional problems.

The replacement should engage smoothly using the method specified by KNIPEX. Stop if unusual resistance occurs.

Test the Adjustment With Suitable Wire

After replacement, set the stripper using sample conductor material within the tool's rated range. Adjust the opening gradually & inspect the stripped conductor for nicks, damaged strands or remaining insulation. Once the correct setting is established, secure the lock nut & repeat the test.

Different insulation constructions may require different settings even where conductor sizes appear similar.

Avoid Over-Tightening the Lock Nut

The lock nut is intended to hold the selected adjustment, not to withstand excessive tightening force. Applying unnecessary pressure can damage the threads or make future adjustment difficult. Follow the manufacturer's guidance & confirm that the setting remains stable during ordinary operation.

If the nut repeatedly loosens, check the condition & compatibility of the components rather than adding improvised locking materials.

Keep the Mechanism Clean

Cable insulation fragments, workshop dust & residue can accumulate around stripping jaws & adjustment components. Cleaning these areas helps maintain normal movement & makes damage easier to identify. Use methods suitable for the tool's materials & any applicable insulation rating.

For general maintenance supplies, explore Tool Maintenance & Cleaning Kits. The article How to Clean Your Gear Without Ruining It provides additional equipment-care guidance.

Never Substitute an Approximate Screw

A generic fastener may appear to fit while having a different thread pitch, head shape or usable length. Such differences can interfere with the intended adjustment mechanism. Use the manufacturer-specified component for compatible tools.

For ordinary installation hardware rather than tool repairs, browse Screws & Anchors.