► Knipex | Cable Cutters

Copper, Aluminium, ACSR, SWA & Bowden Cables The wrong cutting edge can turn an expensive length of cable into scrap. Flattened conductor strands, incomplete cuts & damaged tool jaws often begin with a simple mistake: choosing a cutter by its overall size rather than the cable it is meant to...

Copper, Aluminium, ACSR, SWA & Bowden Cables

The wrong cutting edge can turn an expensive length of cable into scrap. Flattened conductor strands, incomplete cuts & damaged tool jaws often begin with a simple mistake: choosing a cutter by its overall size rather than the cable it is meant to sever.

Before comparing handles or prices, identify what is inside the cable. Copper & aluminium conductors, steel-reinforced ACSR, steel-wire-armoured cable & Bowden control cables require different cutting approaches. A tool that performs well on one material may be entirely unsuitable for another.

Start with the KNIPEX 9512165 165mm Cable Cutter for compact conductor-cutting applications, explore the KNIPEX 9532100 650mm Ratchet Cable Cutter for suitable larger cables or assess the KNIPEX 9532340SR 340mm ACSR Cutter when steel reinforcement is involved.

What Makes a KNIPEX Cable Cutter Suitable for the Job?

A reliable cable-cutting setup begins with the conductor specification.

Cable construction determines which cutting mechanism is appropriate, while diameter, cross-sectional area & available access affect the choice of tool.

Industrial Shed's KNIPEX range covers compact cable shears, longer manual cutters, ratchet-action models, specialist ACSR & SWA cutters, Bowden cable cutting equipment & replacement components.

Some models also carry electrical insulation ratings that must be checked against the manufacturer's current certification.

Not every KNIPEX cable cutter is designed for the same material. Treat the product's cutting-capacity information as the deciding factor rather than its handle length or appearance.

Compare KNIPEX Cable Cutter Types

Cutter type

Models to investigate

Main buying consideration

Compact cable shears

9512165, 9511165SB, 9511200SB

Non-steel conductor compatibility & access

Larger manual cutters

9531280, 9532320

Rated conductor size & available leverage

Ratchet cable cutters

9532060, 9532100

Cable construction, capacity & clearance

1000V-labelled cutters

9536250, 9536280, 9536320

Exact model certification & intended use

ACSR cutter

9532340SR

Steel-reinforced conductor

SWA cutters

9532315A, 9536315A

Steel-wire-armoured cable construction

Bowden cable cutter

9561150

Compatible mechanical control cables

Spare cutting components

9539038, 9539720, 9539870

Exact tool-model fitment

The range includes complete tools & replacement parts. A spare head or repair kit should not be confused with a complete cable cutter.

Compact KNIPEX Cable Cutters – For Suitable Conductor Work

Limited space can make a perfectly capable cutter difficult to operate.

Smaller cable shears are worth considering where a larger tool cannot be positioned correctly around compatible cable.

The KNIPEX 9512165, 9511165SB & 9511200SB provide compact options in the collection.

Their individual jaw designs & cutting limits should be compared before ordering. A shorter handle may help with access, but it does not establish suitability for a particular conductor diameter.

Best selection approach: identify the conductor material, confirm its actual size & choose a cutter that can be operated safely within the available clearance.

Larger Manual Cable Cutters – When More Reach Is Useful

Thicker compatible conductors can require a cutting tool with a different handle arrangement.

The KNIPEX 9531280 280mm Cable Cutter & KNIPEX 9532320 320mm Cable Cutter provide alternatives to compact cable shears.

Their longer format may suit certain applications, provided the manufacturer's material & capacity ratings match the cable.

Do not assume that greater leverage makes a cutter suitable for steel reinforcement or armour. Those applications need specific approval.

Ratchet Cable Cutters – Progressive Cutting Action

Large cable preparation can become awkward when a single squeezing movement is impractical.

A ratchet cutter advances the cutting action through successive handle movements. This mechanism can be useful for suitable larger conductors, depending on the tool's design.

The KNIPEX 9532060 & 9532100 are listed as ratchet cable cutter options.

Check the required jaw opening, operating clearance & material limits before choosing between them.

An important distinction: ratchet operation describes the mechanism, not the permitted cable construction. A ratchet cutter is not automatically an ACSR, SWA or steel wire rope cutter.

KNIPEX ACSR Cutters – For Steel-Reinforced Conductors

Steel reinforcement changes the cutting problem.

ACSR stands for Aluminium Conductor Steel Reinforced. Its combination of aluminium strands & steel reinforcement requires a cutter designed for that construction.

The KNIPEX 9532340SR is listed as a specialist ACSR cable cutter.

It should be selected according to the manufacturer's permitted ACSR sizes & material specifications.

Using a conventional non-steel cable shear on steel-reinforced conductor can damage the cutting edges. Likewise, ACSR suitability does not automatically establish compatibility with every steel rope or armoured cable.

SWA Cable Cutters – Consider the Armour, Not Just the Diameter

A thick cable jacket can conceal a more demanding cutting application.

Steel-wire-armoured cable contains armour that affects the required cutting method. The overall outside diameter includes layers that do not necessarily reflect the cutting demands of the armour itself.

The KNIPEX 9532315A & 9536315A are listed as SWA-related cutting models.

Before ordering, confirm the exact armour construction, cable dimensions & manufacturer's cutting limits.

An SWA-specific model should not be selected solely because the cable appears similar in diameter to an ordinary copper or aluminium conductor.

KNIPEX 9561150 – Bowden Cable Cutter

Not every cable cutter in a workshop is intended for electrical wiring.

Bowden cables are mechanical control cables commonly associated with applications that transmit movement through an inner cable & surrounding housing.

The KNIPEX 9561150 is listed as a Bowden cable cutter, placing it in a different application category from electrical conductor shears.

Buyers maintaining compatible control-cable assemblies should assess this model against the specific cable & housing materials involved.

A Bowden cutter should not be treated as a substitute for an electrical cable cutter, ACSR tool or SWA cutter without manufacturer approval.

This distinction matters for workshop buyers who search for cable cutters but need equipment for mechanical control cables rather than electrical installation.

Understanding KNIPEX 1000V Cable Cutters

Electrical safety ratings must be treated as technical specifications, not marketing shortcuts.

Several KNIPEX listings carry a 1000V designation, including 9536250, 9536280 & 9536320.

Check the exact tool's markings, current manufacturer documentation & applicable certification before relying on an insulation rating.

A 1000V designation does not mean energised cables may be cut without an approved procedure.

Electrical work must follow applicable isolation, testing, authorisation & safe working requirements. Insulated handles also need inspection before use.

Replacement Heads, Blades & Repair Kits

A worn cutting edge does not always mean the entire cutter must be replaced.

Where a manufacturer-approved spare component is available, replacing it may be appropriate if the handles, pivots, frame & mechanism remain serviceable.

This collection includes replacement components identified by part numbers such as 9539038, 9539720, 9539870, 9539315A01 & 9539315A02.

KNIPEX 9539038 – Replacement Cutter Head

The KNIPEX 9539038 Spare Cutter Head is identified for the compatible KNIPEX 9532038 cutter.

That model relationship should be checked before ordering.

Other KNIPEX Replacement Components

The 9539720, 9539870, 9539315A01 & 9539315A02 listings should be selected using the manufacturer's specific compatibility information.

Similar product numbers do not prove interchangeability.

Before fitting replacement components:

► Confirm the original cutter's full model number.
► Match the spare-part designation.
► Inspect the mechanism for additional damage.
► Follow the manufacturer's fitting instructions.
► Recheck operation before returning the tool to service.

Replacement blades cannot increase the original cutter's rated material capacity.

Which KNIPEX Cable Cutter Should You Choose?

Your job

Cutter type to assess

Critical check

Smaller copper or aluminium conductor

Compact cable shear

Material & rated size

Larger compatible non-steel cable

Manual or ratchet cutter

Published capacity

Steel-reinforced ACSR

ACSR-specific cutter

Reinforcement & conductor rating

Steel-wire-armoured cable

SWA-specific cutter

Armour construction

Mechanical control cable

Bowden cable cutter

Inner cable & housing compatibility

Work requiring insulated tools

Certified model-specific cutter

Markings, standards & safe procedure

Existing cutter with worn cutting components

Approved spare head or blade

Exact model fitment

The correct tool depends on the cable construction first, followed by capacity, access & the work method.

Cable Cutters Versus Cable Knives

Cutting a conductor to length is not the same as removing its outer sheath.

Cable cutters are intended to sever compatible cable assemblies. Cable knives are used for controlled opening or removal of appropriate sheathing & insulation layers.

Once a conductor has been cut, the next preparation stage may require a different tool.

Explore KNIPEX Cable Knives for dedicated cable knives, dismantling knives & other listed blade designs.

Using separate tools for cutting & sheath preparation helps buyers match each stage to its actual requirements.

Common Applications for KNIPEX Cable Cutters

Switchboard & Electrical Panel Assembly

Compact cable shears can be useful where suitable conductors need cutting in restricted spaces.

Accurate material identification & safe working clearance are essential.

Industrial Electrical Maintenance

Maintenance crews may encounter copper, aluminium, armoured or reinforced cable across different equipment.

A single general-purpose cutter should not be assumed suitable for all of them.

Infrastructure Conductor Preparation

ACSR & other specialised conductor constructions require approved equipment & authorised work methods.

Mechanical tension, electrical hazards & conductor specifications must all be addressed.

Mechanical Control-Cable Repairs

Bowden cable applications introduce different materials & cutting requirements from electrical conductor work.

Choose equipment intended for the actual cable assembly.

Caring for Cable Cutters & Replacement Components

Changes in cutting effort can signal a worn blade, unsuitable cable or damaged mechanism.

Inspect cutting edges for chips, deformation & unusual wear. Check that moving parts operate correctly & remove debris after use.

Keep replacement heads identified by model number rather than storing loose components together.

Suitable Tool Storage & Organisation options can help protect specialist cutters & spare parts.

Never force a cutter through material outside its published limits.

Why Buy From Industrial Shed?

Industrial Shed is an independent Australian tool retailer based in Somerville, Victoria, supplying specialist cutting equipment & replacement components for electrical, industrial & workshop applications.

A broad KNIPEX selection gives buyers options for several distinct cable constructions, from compact copper & aluminium cutting to specialist ACSR, SWA & Bowden applications.

For delivery arrangements & dispatch conditions, review Shipping & Delivery. Businesses purchasing equipment for ongoing trade work can also explore Trade Exclusives.

Match the Cutter to the Cable Construction

The safest purchasing decision begins with the conductor specification. Compare the relevant KNIPEX models, verify the published capacity & check spare-part compatibility before ordering.

Shop KNIPEX Cable Cutters at Industrial Shed to compare compact shears, ratchet models, specialist ACSR, SWA & Bowden cutters, plus model-specific replacement components.

Frequently Asked Questions

Which KNIPEX cable cutter is best for copper cable?

Choose a model specifically rated for the conductor material & size. Compare compact, manual & ratchet options using manufacturer specifications.

Can ordinary KNIPEX cable shears cut ACSR?

Do not assume so. ACSR contains steel reinforcement & requires a cutter approved for that construction.

What is an SWA cable cutter?

It is a tool intended for compatible steel-wire-armoured cable, subject to the individual model's specifications.

What does the KNIPEX 9561150 cut?

It is listed as a Bowden cable cutter for compatible mechanical control-cable applications.

Are KNIPEX ratchet cutters suitable for every thick cable?

No. Cable construction & rated cutting capacity remain decisive.

Can I replace a damaged cutter head?

Certain models have replacement components available. Match the spare to the exact original tool.

Brands

► Knipex | Cable Cutters

Copper, Aluminium, ACSR, SWA & Bowden Cables

The wrong cutting edge can turn an expensive length of cable into scrap. Flattened conductor strands, incomplete cuts & damaged tool jaws often begin with a simple mistake: choosing a cutter by its overall size rather than the cable it is meant to sever.

Before comparing handles or prices, identify what is inside the cable. Copper & aluminium conductors, steel-reinforced ACSR, steel-wire-armoured cable & Bowden control cables require different cutting approaches. A tool that performs well on one material may be entirely unsuitable for another.

Start with the KNIPEX 9512165 165mm Cable Cutter for compact conductor-cutting applications, explore the KNIPEX 9532100 650mm Ratchet Cable Cutter for suitable larger cables or assess the KNIPEX 9532340SR 340mm ACSR Cutter when steel reinforcement is involved.

What Makes a KNIPEX Cable Cutter Suitable for the Job?

A reliable cable-cutting setup begins with the conductor specification.

Cable construction determines which cutting mechanism is appropriate, while diameter, cross-sectional area & available access affect the choice of tool.

Industrial Shed's KNIPEX range covers compact cable shears, longer manual cutters, ratchet-action models, specialist ACSR & SWA cutters, Bowden cable cutting equipment & replacement components.

Some models also carry electrical insulation ratings that must be checked against the manufacturer's current certification.

Not every KNIPEX cable cutter is designed for the same material. Treat the product's cutting-capacity information as the deciding factor rather than its handle length or appearance.

Compare KNIPEX Cable Cutter Types

Cutter type

Models to investigate

Main buying consideration

Compact cable shears

9512165, 9511165SB, 9511200SB

Non-steel conductor compatibility & access

Larger manual cutters

9531280, 9532320

Rated conductor size & available leverage

Ratchet cable cutters

9532060, 9532100

Cable construction, capacity & clearance

1000V-labelled cutters

9536250, 9536280, 9536320

Exact model certification & intended use

ACSR cutter

9532340SR

Steel-reinforced conductor

SWA cutters

9532315A, 9536315A

Steel-wire-armoured cable construction

Bowden cable cutter

9561150

Compatible mechanical control cables

Spare cutting components

9539038, 9539720, 9539870

Exact tool-model fitment

The range includes complete tools & replacement parts. A spare head or repair kit should not be confused with a complete cable cutter.

Compact KNIPEX Cable Cutters – For Suitable Conductor Work

Limited space can make a perfectly capable cutter difficult to operate.

Smaller cable shears are worth considering where a larger tool cannot be positioned correctly around compatible cable.

The KNIPEX 9512165, 9511165SB & 9511200SB provide compact options in the collection.

Their individual jaw designs & cutting limits should be compared before ordering. A shorter handle may help with access, but it does not establish suitability for a particular conductor diameter.

Best selection approach: identify the conductor material, confirm its actual size & choose a cutter that can be operated safely within the available clearance.

Larger Manual Cable Cutters – When More Reach Is Useful

Thicker compatible conductors can require a cutting tool with a different handle arrangement.

The KNIPEX 9531280 280mm Cable Cutter & KNIPEX 9532320 320mm Cable Cutter provide alternatives to compact cable shears.

Their longer format may suit certain applications, provided the manufacturer's material & capacity ratings match the cable.

Do not assume that greater leverage makes a cutter suitable for steel reinforcement or armour. Those applications need specific approval.

Ratchet Cable Cutters – Progressive Cutting Action

Large cable preparation can become awkward when a single squeezing movement is impractical.

A ratchet cutter advances the cutting action through successive handle movements. This mechanism can be useful for suitable larger conductors, depending on the tool's design.

The KNIPEX 9532060 & 9532100 are listed as ratchet cable cutter options.

Check the required jaw opening, operating clearance & material limits before choosing between them.

An important distinction: ratchet operation describes the mechanism, not the permitted cable construction. A ratchet cutter is not automatically an ACSR, SWA or steel wire rope cutter.

KNIPEX ACSR Cutters – For Steel-Reinforced Conductors

Steel reinforcement changes the cutting problem.

ACSR stands for Aluminium Conductor Steel Reinforced. Its combination of aluminium strands & steel reinforcement requires a cutter designed for that construction.

The KNIPEX 9532340SR is listed as a specialist ACSR cable cutter.

It should be selected according to the manufacturer's permitted ACSR sizes & material specifications.

Using a conventional non-steel cable shear on steel-reinforced conductor can damage the cutting edges. Likewise, ACSR suitability does not automatically establish compatibility with every steel rope or armoured cable.

SWA Cable Cutters – Consider the Armour, Not Just the Diameter

A thick cable jacket can conceal a more demanding cutting application.

Steel-wire-armoured cable contains armour that affects the required cutting method. The overall outside diameter includes layers that do not necessarily reflect the cutting demands of the armour itself.

The KNIPEX 9532315A & 9536315A are listed as SWA-related cutting models.

Before ordering, confirm the exact armour construction, cable dimensions & manufacturer's cutting limits.

An SWA-specific model should not be selected solely because the cable appears similar in diameter to an ordinary copper or aluminium conductor.

KNIPEX 9561150 – Bowden Cable Cutter

Not every cable cutter in a workshop is intended for electrical wiring.

Bowden cables are mechanical control cables commonly associated with applications that transmit movement through an inner cable & surrounding housing.

The KNIPEX 9561150 is listed as a Bowden cable cutter, placing it in a different application category from electrical conductor shears.

Buyers maintaining compatible control-cable assemblies should assess this model against the specific cable & housing materials involved.

A Bowden cutter should not be treated as a substitute for an electrical cable cutter, ACSR tool or SWA cutter without manufacturer approval.

This distinction matters for workshop buyers who search for cable cutters but need equipment for mechanical control cables rather than electrical installation.

Understanding KNIPEX 1000V Cable Cutters

Electrical safety ratings must be treated as technical specifications, not marketing shortcuts.

Several KNIPEX listings carry a 1000V designation, including 9536250, 9536280 & 9536320.

Check the exact tool's markings, current manufacturer documentation & applicable certification before relying on an insulation rating.

A 1000V designation does not mean energised cables may be cut without an approved procedure.

Electrical work must follow applicable isolation, testing, authorisation & safe working requirements. Insulated handles also need inspection before use.

Replacement Heads, Blades & Repair Kits

A worn cutting edge does not always mean the entire cutter must be replaced.

Where a manufacturer-approved spare component is available, replacing it may be appropriate if the handles, pivots, frame & mechanism remain serviceable.

This collection includes replacement components identified by part numbers such as 9539038, 9539720, 9539870, 9539315A01 & 9539315A02.

KNIPEX 9539038 – Replacement Cutter Head

The KNIPEX 9539038 Spare Cutter Head is identified for the compatible KNIPEX 9532038 cutter.

That model relationship should be checked before ordering.

Other KNIPEX Replacement Components

The 9539720, 9539870, 9539315A01 & 9539315A02 listings should be selected using the manufacturer's specific compatibility information.

Similar product numbers do not prove interchangeability.

Before fitting replacement components:

► Confirm the original cutter's full model number.
► Match the spare-part designation.
► Inspect the mechanism for additional damage.
► Follow the manufacturer's fitting instructions.
► Recheck operation before returning the tool to service.

Replacement blades cannot increase the original cutter's rated material capacity.

Which KNIPEX Cable Cutter Should You Choose?

Your job

Cutter type to assess

Critical check

Smaller copper or aluminium conductor

Compact cable shear

Material & rated size

Larger compatible non-steel cable

Manual or ratchet cutter

Published capacity

Steel-reinforced ACSR

ACSR-specific cutter

Reinforcement & conductor rating

Steel-wire-armoured cable

SWA-specific cutter

Armour construction

Mechanical control cable

Bowden cable cutter

Inner cable & housing compatibility

Work requiring insulated tools

Certified model-specific cutter

Markings, standards & safe procedure

Existing cutter with worn cutting components

Approved spare head or blade

Exact model fitment

The correct tool depends on the cable construction first, followed by capacity, access & the work method.

Cable Cutters Versus Cable Knives

Cutting a conductor to length is not the same as removing its outer sheath.

Cable cutters are intended to sever compatible cable assemblies. Cable knives are used for controlled opening or removal of appropriate sheathing & insulation layers.

Once a conductor has been cut, the next preparation stage may require a different tool.

Explore KNIPEX Cable Knives for dedicated cable knives, dismantling knives & other listed blade designs.

Using separate tools for cutting & sheath preparation helps buyers match each stage to its actual requirements.

Common Applications for KNIPEX Cable Cutters

Switchboard & Electrical Panel Assembly

Compact cable shears can be useful where suitable conductors need cutting in restricted spaces.

Accurate material identification & safe working clearance are essential.

Industrial Electrical Maintenance

Maintenance crews may encounter copper, aluminium, armoured or reinforced cable across different equipment.

A single general-purpose cutter should not be assumed suitable for all of them.

Infrastructure Conductor Preparation

ACSR & other specialised conductor constructions require approved equipment & authorised work methods.

Mechanical tension, electrical hazards & conductor specifications must all be addressed.

Mechanical Control-Cable Repairs

Bowden cable applications introduce different materials & cutting requirements from electrical conductor work.

Choose equipment intended for the actual cable assembly.

Caring for Cable Cutters & Replacement Components

Changes in cutting effort can signal a worn blade, unsuitable cable or damaged mechanism.

Inspect cutting edges for chips, deformation & unusual wear. Check that moving parts operate correctly & remove debris after use.

Keep replacement heads identified by model number rather than storing loose components together.

Suitable Tool Storage & Organisation options can help protect specialist cutters & spare parts.

Never force a cutter through material outside its published limits.