► Klein Tools | Jobsite Fan

Portable Airflow That Adapts To The Work Area When heat builds around a switchboard, service vehicle, plant room or workshop bench, moving the entire setup just to reach a fan makes little sense. Klein Tools | Jobsite Fan gives electricians, technicians, contractors & maintenance crews compact rechargeable airflow that can...

Portable Airflow That Adapts To The Work Area

When heat builds around a switchboard, service vehicle, plant room or workshop bench, moving the entire setup just to reach a fan makes little sense. Klein Tools | Jobsite Fan gives electricians, technicians, contractors & maintenance crews compact rechargeable airflow that can be positioned around the task.

Unlike a conventional floor fan that depends on available floor space, the Klein rechargeable personal jobsite fan offers four practical placement methods. It can stand on its base, clamp onto a suitable stud or conduit, attach magnetically to an appropriate ferrous surface or hang from its incorporated mounting hole. A rotating arm base & 360-degree spinning fan cage then allow the airflow direction to be adjusted around the working position.

For crews preparing equipment around changing site conditions, Klein Tools | Cooling Gear & Clothing, Klein Tools | Flashlights & Work Lights & Klein Tools | Electricians Tool Kits provide closely related options for personal comfort, visibility & field preparation.

Its strongest advantage is not simply portability. The mounting system allows useful airflow to reach places where a larger fan can be awkward to position.

What Is Klein Tools Jobsite Fan?

The Klein Tools Rechargeable Personal Jobsite Fan is a compact fan designed to provide localised air movement around suitable indoor & outdoor work environments.

Instead of requiring a separate removable power-tool battery, the fan contains an integrated rechargeable lithium-ion battery. USB-C charging makes it straightforward to recharge alongside other portable electronic equipment between jobs.

Its key features include:

► Two fan speeds
► Up to 9 hours runtime on low
► Up to 5 hours runtime on high
► 360-degree rotating arm base
► Fan cage that spins through 360 degrees
► Two integrated magnets
► Strong mounting clamp
► Incorporated hang hole
► Stable sit-on base
► LED battery-level gauge
► USB-C charging
► High-impact polypropylene construction
► Indoor & outdoor suitability
► IP54-rated construction

At approximately 26.7 cm high & 1.1 kg, the fan remains compact enough for mobile work while providing several alternatives to conventional floor placement.

Hot-weather preparation involves more than adding equipment on the day temperatures rise. Spring Jobsite Prep: Getting Your Gear Ready for the Busy Season covers practical considerations for getting trade gear ready before workload & conditions intensify.

Why Choose Klein Tools Jobsite Fan?

A portable fan becomes considerably more useful when its position can change with the technician.

Four Ways To Position The Fan

Work areas do not always provide a clear bench or level floor.

Depending on the surroundings, the Klein jobsite fan can be:

► Placed on its base
► Attached magnetically to a suitable ferrous surface
► Clamped onto an appropriate stud or conduit
► Suspended using its incorporated hang hole

That versatility is particularly useful around crowded service areas where floor space, access & equipment placement can change throughout the job.

Aim Airflow Through 360 Degrees

Moving the entire fan should not be necessary every time the technician changes position.

The arm base rotates while the fan cage also spins through 360 degrees, providing considerable control over airflow direction.

Balance Airflow Against Runtime

Some jobs require stronger airflow for a shorter period. Others benefit more from extended operation.

The two modes provide:

► Low: up to 9 hours
► High: up to 5 hours

Using the lower setting where appropriate can extend operation across longer service or maintenance tasks.

Recharge Through USB-C

A self-contained rechargeable battery reduces the amount of separate equipment required to operate the fan.

The LED battery gauge provides a quick indication of remaining charge, while USB-C charging allows the fan to be incorporated into a regular charging routine.

For technicians already carrying portable gear between sites, Heavy-Duty Tool Bags provide a related storage pathway for everyday equipment.

Built For Changing Work Environments

The fan is specified for indoor & outdoor use & uses a high-impact polypropylene housing.

Its IP54 rating adds resistance to dust & water ingress under the conditions covered by that rating, although the fan should still be operated, charged, cleaned & stored according to manufacturer instructions.

Common Applications

Switchboards & Electrical Service Areas

Limited space around electrical equipment makes compact placement especially valuable.

A personal fan can provide local airflow while leaving more of the floor & working area available for tools, test equipment & the technician.

Suitable scenarios can include:

► Switchboard installation
► Electrical servicing
► Building maintenance
► Equipment rooms
► Communications work
► Commercial fit-outs

For broader field setups, Electrical Tool Kits provide additional equipment options for installation & maintenance work.

Workshop Benches

Workshop airflow rarely reaches every bench equally.

Instead of relocating a larger fan whenever the work moves, the Klein unit can be positioned close to an individual workstation using the most appropriate mounting method available.

This can suit:

► Assembly work
► Component servicing
► Equipment inspection
► General repairs
► Bench maintenance

Service Vehicles

Mobile technicians have limited space for equipment that performs only one narrow role.

A compact rechargeable fan can travel in a service vehicle, then move directly to the work area without requiring access to mains power during operation.

Its magnetic & clamp mounting options can also be useful where an appropriate mounting surface is available.

Construction Fit-Outs

Permanent ventilation or cooling may not yet be operating during some stages of a build.

Local airflow can assist around suitable:

► Electrical rough-ins
► Interior fit-outs
► Temporary workstations
► Building-service installations
► Maintenance tasks

For broader jobsite protection requirements, Work Safety Protections can support the surrounding site setup.

Plant Rooms & Equipment Areas

Mechanical & electrical equipment can make already confined work areas uncomfortable.

A compact fan can be positioned around suitable maintenance locations without introducing the footprint of a larger pedestal or floor unit.

Outdoor & Semi-Outdoor Work

Klein specifies the rechargeable personal jobsite fan for indoor & outdoor use.

Portable airflow can improve comfort in appropriate conditions, but it does not replace workplace controls for heat exposure. Hydration, shade, rest periods, suitable clothing & work planning remain important.

For personal equipment intended around warmer working conditions, Head & Face Protection provides another relevant site-equipment pathway.

Product Selection Guide

This fan is best suited to buyers who need targeted personal airflow rather than whole-room cooling.

Working Situation

Feature Worth Prioritising

Mobile service work

Compact rechargeable design

Long individual tasks

Up to 9-hour low-speed runtime

Stronger short-term airflow

High-speed mode

Steel equipment nearby

Integrated magnetic mounting

Stud or conduit access

Clamp mounting

Crowded workbench

Hanging or elevated placement

Frequently changing position

360-degree airflow adjustment

Outdoor work

Rated use & environmental conditions

Personal Airflow Or Area Cooling?

A compact jobsite fan is designed around local airflow.

That makes it particularly practical for one technician, a bench or a defined working position.

Cooling a large workshop, warehouse or broad construction zone may require a larger ventilation or cooling solution.

Look At The Mounting Environment

The fan offers several mounting methods, but each depends on the surrounding structure.

Before beginning the task, consider:

► Is there a suitable ferrous surface for the magnets?
► Is an appropriate stud or conduit available for clamping?
► Is there a secure hanging point?
► Is there a stable surface for freestanding use?

This assessment can help determine the most useful position before tools & materials occupy the work area.

Estimate Required Runtime

A 30-minute service task & a long maintenance session create different demands.

Low mode can operate for up to 9 hours, while high mode provides up to 5 hours. Actual preparation should account for the length of the job & available charging opportunities.

Rechargeable equipment also benefits from consistent charging habits. How to Extend the Life of Your Batteries: Charging Habits That Matter provides broader guidance for battery-powered trade gear.

Account For Size & Transport

At roughly 26.7 cm high, 22.9 cm long & 10.5 cm wide, the fan occupies substantially less space than conventional pedestal-style equipment.

That compact footprint can matter for:

► Service vans
► Tool storage areas
► Maintenance carts
► Workshop shelving
► Temporary workstations

Consider Noise Around The Task

Klein specifies a maximum sound level of 60 dB at approximately 45 cm.

Where communication, diagnostic listening or other noise-sensitive work is involved, fan placement & speed can be adjusted around the task.

Expert Tips

Establish The Mount Before Reaching For Tools

A secure fan position is easier to confirm before the workspace becomes crowded.

Test the clamp, magnet, hanging point or base placement first. The supporting surface needs to be appropriate for the selected mounting method.

Direct Air Across The Operator

The 360-degree adjustment provides more options than simply pointing the cage straight ahead.

Experiment with the angle to establish useful air movement without unnecessarily directing dust, loose material or debris toward the work.

Reserve High Speed For When It Adds Value

Maximum output is not required for every application.

Low mode offers the longer stated runtime, making it practical where moderate airflow is sufficient across an extended task.

Leave The Air Path Unobstructed

Crowded benches can easily place materials around the fan cage.

Maintain suitable clearance around the fan so intake & discharge airflow are not unnecessarily restricted.

Read The Battery Gauge Before Leaving

A rechargeable fan provides its greatest advantage away from mains power only when sufficient charge is available.

Include the battery gauge in the same pre-job equipment check used for rechargeable lights, testers & other portable electronics.

Protect The Unit Between Sites

Dust, loose tools & heavy equipment can damage portable electronics during transport.

Store the fan where the cage, clamp, charging port & housing are protected from unnecessary impact.

Leave Internal Repairs To Appropriate Service Channels

Klein states that the fan contains no user-serviceable parts.

Do not open the enclosure or attempt internal repairs.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Klein Tools - Rechargeable Jobsite Fan | A-PJSFM1Klein Tools - Rechargeable Jobsite Fan | A-PJSFM1
    Klein Tools - Rechargeable Jobsite Fan | A-PJSFM1
    RECHARGEABLE JOBSITE FAN | A-PJSFM1 The Klein Tools Rechargeable Jobsite Fan (A-PJSFM1) is a rugged personal cooling solution built for demanding work environments. Designed with multiple mounting options including powerful magnets, an integrated clamp, and a hang hole, this rechargeable fan keeps airflow exactly...
    $157.87
    $157.87

Why Buy From Industrial Shed?

For mobile trades, useful equipment needs to justify the space it occupies in the vehicle, workshop or site kit.

Industrial Shed supplies Klein Tools equipment for Australian electricians, contractors, technicians & maintenance teams who need practical gear for changing work environments.

Crews purchasing equipment for upcoming projects can review Same day dispatch for current shipping & delivery arrangements.

Businesses coordinating recurring purchases across technicians, vehicles or workshop teams can use Application for Credit Account when establishing an ongoing purchasing pathway.

Equipment reliability matters well beyond the first day of use. A Tool Is Not Just a Tool. It’s a Promise. looks at the broader role dependable equipment plays in professional trade work.

Put The Airflow Where The Technician Needs It

A personal fan earns its place in the kit when it can adapt to the workspace rather than demanding clear floor space every time conditions become uncomfortable.

Assess the available mounting point, expected runtime, required airflow & charging opportunity before the job begins. Then position the fan so it supports the working area without obstructing tools, access or surrounding equipment.

Bring rechargeable, positionable airflow into hot benches, service vehicles, plant rooms & active work areas with Klein Tools | Jobsite Fan from Industrial Shed.

Frequently Asked Questions

Klein specifies up to 9 hours on low speed & up to 5 hours on high speed.

Its compact size, rotating airflow direction & four placement methods allow it to be positioned without automatically occupying valuable floor space.

The integrated magnets require a suitable ferrous surface. Always confirm that the mounting position is stable before operating the fan.

Klein specifies the base clamp for attachment to suitable studs or conduit. Confirm secure engagement before leaving the unit mounted.

Klein specifies the unit for indoor & outdoor use. Environmental conditions still need to remain within the manufacturer's operating requirements.

Do not open the enclosure. Klein states that there are no user-serviceable parts inside the fan.

Brands

Klein Tools

Klein Tools

Solutions Built for Tradies: How Industrial Shed Powers Your Success

At Industrial Shed, we understand that reliable tools are the backbone of any successful project. That’s why we stock durable, high-performance equipment designed to handle tough jobs without breakdowns or delays. Trade professionals across the Mornington Peninsula and Melbourne trust our range for its dependability and long-lasting quality.

As an independent tool retailer, we take pride in offering only the most trusted brands to ensure you get the job done right the first time. Whether you need hand tools, power tools, or workshop essentials, our carefully curated selection guarantees reliability, so you can focus on your work with confidence.

Struggling to locate specialised tools for your trade? Industrial Shed has you covered. Our extensive range ensures trade professionals across the Mornington Peninsula and Melbourne have access to niche products without the hassle of searching multiple suppliers. From unique fasteners to specialty power tools, we make it simple to find exactly what you need.

As a local, independent tool retailer, we understand the challenges tradies face in sourcing specific equipment. Our team is here to provide expert advice and personalised support, ensuring you have the right tools for the job—every time.

At Industrial Shed, we know the trade industry inside out. As an independent tool shop based on the Mornington Peninsula, we are deeply familiar with the needs of local tradies and construction professionals. Our curated selection of tools is designed to meet the demands of both large-scale projects and everyday trade work.

Our team provides tailored advice and practical solutions to ensure you’re equipped with the right tools and equipment for every job. With years of experience serving Melbourne and Mornington Peninsula professionals, we are your trusted partner for all things trade.

At Industrial Shed, we simplify your workday by offering everything you need under one roof. From hand tools and power tools to fasteners, workwear, and safety gear, our one-stop shop helps trade professionals save valuable time. No more running between multiple suppliers—we have it all.

Serving the Mornington Peninsula and Melbourne regions, we take pride in making your tool shopping experience efficient and straightforward. As an independent retailer, we focus on delivering high-quality products with the service and support you can rely on.

Your safety is our priority at Industrial Shed. We stock a full range of durable workwear, safety equipment, and PPE to keep you and your team protected on-site. From hi-vis clothing to helmets and gloves, our collection is designed with the toughest conditions in mind.

Trade professionals on the Mornington Peninsula and in Melbourne trust us for reliable safety solutions. With expert advice and a commitment to quality, we make sure you have the gear you need to stay safe while getting the job done.

Demanding projects require tools you can trust. At Industrial Shed, our heavy-duty tools and equipment are built to handle the toughest challenges on any worksite. Whether it’s power tools, concrete tools, or lifting gear, we’ve got the equipment you need to perform.

Serving trade professionals across the Mornington Peninsula and Melbourne, we specialise in high-performance tools that stand up to wear and tear. As an independent tool retailer, we provide personalised service to ensure you have the strength and reliability to succeed.

At Industrial Shed, we believe that balancing cost and performance shouldn’t mean compromising on quality. Our range of high-performance tools is competitively priced to ensure Melbourne and Mornington Peninsula tradies stay within budget while using the best gear.

From hand tools to power tools, we stock trusted brands that deliver value and durability. As an independent retailer, we’re committed to providing trade professionals with reliable tools that won’t break the bank—or let you down.

At Industrial Shed, we understand the importance of reliable power on the job. Our range of generators and portable power solutions is designed to keep your tools and equipment running smoothly, no matter where you’re working.

From small repairs to large-scale projects across the Mornington Peninsula and Melbourne, our power solutions are trusted by trade professionals. As your local tool shop, we offer expert advice to ensure you’re equipped with the right tools for uninterrupted productivity.

Avoid costly project delays with Industrial Shed’s consistently stocked inventory. We ensure trade professionals across the Mornington Peninsula and Melbourne have quick access to the tools, fasteners, and supplies they need to get the job done on time.

As an independent retailer, we pride ourselves on being a reliable partner for tradies, offering high-quality products and personalised service. When you shop with us, you’ll never have to worry about supply shortages holding you back.

At Industrial Shed, we’re more than just a tool retailer—we’re your partner in productivity. Serving Melbourne and the Mornington Peninsula, we provide trade professionals with the trusted tools, advice, and support they need to succeed on every project.

Our independent approach ensures we prioritise your needs, from reliable product recommendations to tailored solutions. With our high-quality gear and expert service, you can count on us to help you work smarter and achieve more.