► ICCONS® | Rivets Trade Packs

Blind Rivets for Fabrication, Repairs & Repetitive Assembly Need a permanent sheet or panel connection when reaching the back of the work is difficult or impossible? ICCONS® | Rivets Trade Packs provide blind-rivet options for fabrication, maintenance, manufacturing, assembly & repair work, with standard dome-head, multigrip & selected colour-matched configurations...

Blind Rivets for Fabrication, Repairs & Repetitive Assembly

Need a permanent sheet or panel connection when reaching the back of the work is difficult or impossible? ICCONS® | Rivets Trade Packs provide blind-rivet options for fabrication, maintenance, manufacturing, assembly & repair work, with standard dome-head, multigrip & selected colour-matched configurations represented across the wider ICCONS rivet family.

For fabricators, maintenance technicians, installers & workshop crews, the important decisions extend beyond diameter & pack quantity. Combined material thickness, grip range, hole diameter, body material & finished head appearance all influence the correct choice. Compare related fastening options through Rivets & Fixings, explore adjacent permanent fixings through Rivets & Screw Posts or prepare accurate holes with suitable Drill Accessories.

► Trade-pack quantities across selected configurations
► Scell-it blind-rivet construction across documented ICCONS families
► Aluminium alloy body options
► Zinc-plated low-carbon steel mandrels across aluminium/steel families
► Standard dome-head configurations
► Multigrip options for wider material ranges
► Selected painted finishes for visible sheet-metal work
► Installation from the accessible side of suitable assemblies
► Hand & cordless rivet-tool compatibility across applicable sizes
► Practical for manufacturing, maintenance, assembly & repairs

What Are ICCONS® Rivets Trade Packs?

Compact packaging makes stock easier to manage but the connection still determines which rivet belongs in the hole.

ICCONS packages selected Scell-it blind rivets in trade quantities suited to workshops, service vehicles, maintenance stores & smaller production runs where carrying bulk cartons of every configuration may be unnecessary.

Across the documented aluminium/steel families, standard dome-head rivets use aluminium alloy bodies with zinc-plated low-carbon steel mandrels while multigrip versions provide a wider working grip range.

That wider range becomes useful when material thickness varies between otherwise similar assemblies.

Before choosing a pack, establish:

► Material combination
► Combined material thickness
► Rivet body diameter
► Required grip range
► Drill diameter
► Head style
► Finish or colour
► Installation volume

For a broader look at fastening choices used across trade work, read the Fastener Guide Bolts Screws Anchors.

Rear Access Can Decide the Fastening Method

A panel may be easy to position yet impossible to reach from behind once it enters the assembly.

Blind riveting addresses that problem by allowing the fastener to be installed from the accessible face.

That characteristic makes rivets useful across suitable:

► Sheet-metal fabrication
► Covers & enclosures
► Panels
► Manufactured components
► Workshop assemblies
► Maintenance repairs
► Light fabrication
► General repair work

Unlike a bolt & nut connection, the installer does not need to position a separate nut behind the material during setting.

For jobs where removable threaded hardware is more appropriate, Bolts & Fasteners provides additional fastening options.

Standard Dome Head or Multigrip?

Consistent material thickness calls for a different rivet choice from repair work that encounters several panel combinations every week.

Selection Point

Standard Dome Head

Multigrip

Head style

Dome

Dome

Mandrel across documented aluminium/steel families

Zinc-plated steel

Zinc-plated steel

Grip behaviour

Defined by exact configuration

Extended grip range

Useful when

Material stack is known & repeatable

Material thickness varies

Stock approach

Dedicated sizes for specific joints

Wider coverage from fewer sizes

Typical users

Production & repetitive assembly

Maintenance, repair & mixed fabrication

ICCONS states that a suitable multigrip rivet can substitute for up to three conventional rivet sizes.

For service vehicles carrying consumables for varied repairs, that wider range can reduce the number of individual configurations needed for suitable connections.

Measure the Joint Before Selecting the Rivet

A rivet does not grip the first sheet or second sheet independently; it has to accommodate the combined thickness of the connection.

Grip range is therefore one of the first specifications worth checking.

Documented ICCONS multigrip examples include:

Example

Body Diameter

Grip Range

4-1/3 multigrip

3.2 mm

0.8–4.8 mm

5-1/4 multigrip

4.0 mm

1.2–6.4 mm

Other configurations cover different material ranges.

Measure every layer captured by the rivet then compare that total against the exact product specification.

When fabrication work contains numerous fixing centres or changing material dimensions,  Measuring & Layout Tools can help keep preparation accurate.

A Correct Rivet Still Needs a Correct Hole

Poor hole preparation can compromise a well-selected fastener before the rivet tool even reaches the mandrel.

ICCONS publishes drill diameter alongside its rivet specifications.

Relevant 3.2 mm body configurations, for example, specify a 3.3 mm (#30) drill diameter.

Before setting:

► Confirm the specified drill diameter
► Drill through the complete material stack
► Keep the drill square
► Remove excessive burrs
► Clear drilling debris
► Bring the components together
► Check access for the riveter

Do not automatically match the drill bit to the nominal rivet body diameter.

Use the specified hole size for the exact rivet being installed.

Why Carry Rivets in Trade Packs?

A service vehicle carrying several useful rivet configurations needs organised stock more than oversized quantities of every size.

Trade packs can suit crews that need practical quantities while keeping different diameters, grip ranges & finishes identifiable.

They can be particularly useful where:

► Several rivet sizes travel in one service vehicle
► Maintenance stock is divided between technicians
► Painted rivets need to remain separated
► A workshop has dedicated assembly stations
► Smaller production runs use different configurations
► Replacement stock needs straightforward identification

Pack quantity should follow expected consumption while the connection determines the rivet inside it.

For specialised fastening requirements beyond conventional blind riveting, browse Specialty Fasteners & Fixings.

Colour-Matched Heads Matter on Finished Sheet

A mechanically correct rivet can still look out of place when its head contrasts sharply against a finished panel.

ICCONS offers painted aluminium/steel rivets across numerous COLORBOND colours, allowing selected visible fasteners to coordinate more closely with surrounding sheet finishes.

A documented painted 4-1/3 multigrip configuration, for example, combines:

► 3.2 mm body diameter
► 3.3 mm (#30) drill diameter
► 0.8–4.8 mm grip range
► Aluminium body
► Zinc-plated steel mandrel
► Painted dome head

Mechanical suitability comes first.

Confirm diameter, grip range & hole preparation before selecting the colour.

Multigrip Rivets Can Simplify Service-Vehicle Stock

Repair work rarely presents every technician with the same two sheets at the same thickness.

One call-out may involve a thin cover while another combines overlapping panels, brackets or enclosure components.

Where the material stack remains inside the documented range, multigrip rivets provide broader coverage than a conventional rivet selected around a narrower grip window.

That can benefit:

► Maintenance technicians
► Mobile repair teams
► Manufacturing support crews
► General fabrication workshops
► Service departments

Reduced stock variety is useful only when the selected rivets remain suitable for the connections encountered.

For practical preparation before busy workshop or site periods, see Spring Jobsite Prep Getting Your Gear Ready.

Diameter & Grip Range Answer Different Questions

Two measurements on the same rivet describe different parts of the installation.

Body diameter relates directly to the rivet body & required hole preparation.

Grip range describes the combined material thickness the selected configuration is designed to accommodate.

Record both whenever a rivet will need to be reordered.

A useful workshop specification includes:

► Rivet family
► Body diameter
► Grip range
► Drill diameter
► Head style
► Material combination
► Finish or colour
► Pack quantity

Writing only “aluminium rivet” leaves too many details unresolved for reliable replenishment.

What Happens When the Riveter Pulls the Mandrel?

The visible dome head remains at the front while the fastening action develops behind the material.

After the rivet body enters the prepared hole, the riveter grips & pulls the mandrel while the nosepiece supports the rivet head.

That action deforms the rivet body on the blind side, bringing the joined components together.

Once the rivet reaches its set condition, the mandrel breaks at its designed point during installation.

The resulting mechanical connection can be completed without positioning a separate nut behind the work.

This makes blind riveting particularly practical where panels, enclosures or assembled components restrict rear access.

Hand Riveter or Cordless Riveter?

Ten repair rivets & several hundred production rivets place very different demands on the person setting them.

Applicable Scell-it rivets can be installed with suitable hand or powered blind-rivet tools where the selected fastener falls within the tool's stated capacity.

Hand tools can make sense for:

► Occasional maintenance
► Smaller repairs
► Low-volume assembly
► Portable kits

Powered riveting becomes more attractive as repetitive volume increases.

Regardless of the setting tool, accurate hole preparation remains essential. Browse Power Tool Accessories when preparing drilling equipment for repeated fabrication & assembly work.

Before production begins, confirm the correct nosepiece, rivet capacity & tool condition.

Production Work Magnifies Small Selection Errors

One mismatched rivet may cost a minute; the same mistake across fifty assemblies can create substantial rework.

Manufacturing teams benefit from defining the required fastener before the assembly reaches the workstation.

Separate packs by:

► Body diameter
► Grip range
► Standard or multigrip
► Finish
► Colour
► Assembly number
► Workstation

Clear identification helps prevent a visually similar rivet with a different grip range from entering the wrong joint.

When the connection repeats throughout a product, the first confirmed assembly provides a useful reference for the remainder of the run.

Repairs Begin With the Hole That Exists Now

Removing an old rivet reveals what was installed but the surrounding material may no longer match its original condition.

Once the failed or damaged fastener is drilled out, inspect the existing hole before selecting the replacement.

Look for:

► Hole enlargement
► Elongation
► Burrs
► Material cracking
► Distortion
► Corrosion
► Loose mating surfaces

A replacement rivet that resembles the original cannot correct damaged parent material by itself.

Where the hole or surrounding component has changed, reassess the connection before setting another fastener.

Visible Rivet Lines Reward Accurate Layout

A straight, evenly spaced rivet line can contribute to a clean finished panel while inconsistent positioning becomes immediately noticeable.

For visible sheet work, careful spacing & controlled hole preparation help produce a more consistent result.

Before drilling:

► Establish fixing centres
► Mark the complete run
► Check edge distances
► Confirm component alignment
► Verify colour where applicable
► Drill consistently

Accurate preparation also reduces the likelihood of forcing a rivet through poorly aligned material.

For more practical guidance on choosing dependable fastening hardware, read Why Good Fasteners Matter More Than the Tool You Drive Them With.

Aluminium/Steel Does Not Identify the Whole Rivet

Material description narrows the choice but it does not tell you the diameter, grip range, head finish or required hole size.

Within ICCONS' documented range, the same broad material combination can appear across different diameters, body lengths, grip ranges, colours & rivet styles.

Two packs can therefore look closely related while serving different material stacks.

Check:

► Exact rivet type
► Diameter
► Length
► Grip range
► Required drill diameter
► Finish
► Colour where relevant

Complete identification becomes especially important when several rivet packs share the same workshop drawer or service vehicle.

Three Workshop Habits for More Consistent Riveting

Prove the First Joint

A single completed connection can expose a sizing or preparation problem before it spreads through an entire production run.

Set one rivet through representative material then inspect the head seating, material clamping & overall connection.

Keep the Correct Drill With the Rivet Stock

Pairing the specified drill size with the relevant rivet pack reduces unnecessary guesswork between workstations.

Replace worn drills before poor hole quality becomes routine.

Record the Successful Configuration

A confirmed rivet specification makes the next production batch or repair easier to reproduce.

Keep the configuration with the drawing, job record or maintenance history.

Match the Rivet Style to the Work Pattern

Repeated Assembly With One Material Thickness

Consistency makes a standard dome-head configuration practical when the same material stack repeats throughout production.

Repairs Across Several Material Thicknesses

Variation gives multigrip rivets their advantage where one documented grip range can accommodate several suitable joints.

Painted Panels or Visible Sheet

Appearance becomes another consideration once the fastener head remains exposed on the finished surface.

Mobile Maintenance Stock

Compact packs make useful configurations easier to separate, identify & replenish between call-outs.

Choose from the joint outward rather than from the packaging inward.

Why Source ICCONS® Rivets Trade Packs Through Industrial Shed?

Fastener replenishment becomes far easier when the workshop knows the required joint specification instead of relying on an unmarked rivet removed from an old assembly.

Industrial Shed supports fabricators, installers, maintenance departments & workshop crews sourcing ICCONS fasteners for production, repairs & day-to-day assembly.

For assistance with a rivet requirement for an existing job, Contact Us.

For workshop consumable planning & replenishment, explore on -site & workshop Services.

Put the Right Rivet Beside the Right Joint

A useful trade pack puts a known fastener specification within reach when the assembly is ready to be joined.

Measure the combined material thickness, confirm the required hole then select the body diameter, grip range, rivet style & finish around the actual connection. Where several joints repeat, label the packs against the corresponding work so crews can identify the correct fastener without comparing nearly identical loose rivets.

Good preparation keeps the process straightforward from drilling & setting through to inspection & future replenishment.

Choose ICCONS Rivets Trade Packs for suitable fabrication, maintenance, manufacturing & repair work where blind-side installation, practical pack quantities & correctly matched grip ranges support dependable mechanical fastening.

Frequently Asked Questions

We've measured 4 mm through both sheets. Which rivet figure should we check?

Compare the complete 4 mm material stack against the grip range of the exact rivet configuration. The thickness of either sheet by itself does not describe the complete joint.

Why might a maintenance crew prefer multigrip rivets?

Their wider grip range can cover more material-thickness combinations. ICCONS states that one suitable multigrip rivet can replace up to three conventional rivet sizes.

Can a blind rivet be installed when the rear of the panel is inaccessible?

Yes. Installation is carried out from the accessible side. The blind side still needs sufficient clearance for the rivet body to form during setting.

What should we check when a replacement rivet feels loose in the old hole?

Inspect the hole for enlargement, distortion or damage before fitting another rivet. The existing material condition should be assessed rather than simply increasing the rivet size.

Do painted rivets change how the grip range is selected?

No. Colour affects the visible finish, not the need to match the rivet mechanically to the material stack. Confirm diameter, drill size & grip range first.

Why is the specified drill sometimes slightly larger than the nominal rivet body?

The required hole provides the clearance specified for installation. Follow the drill diameter documented for the exact rivet rather than assuming the nominal body size should also be the drill size.

Brands

► ICCONS® | Rivets Trade Packs

Blind Rivets for Fabrication, Repairs & Repetitive Assembly

Need a permanent sheet or panel connection when reaching the back of the work is difficult or impossible? ICCONS® | Rivets Trade Packs provide blind-rivet options for fabrication, maintenance, manufacturing, assembly & repair work, with standard dome-head, multigrip & selected colour-matched configurations represented across the wider ICCONS rivet family.

For fabricators, maintenance technicians, installers & workshop crews, the important decisions extend beyond diameter & pack quantity. Combined material thickness, grip range, hole diameter, body material & finished head appearance all influence the correct choice. Compare related fastening options through Rivets & Fixings, explore adjacent permanent fixings through Rivets & Screw Posts or prepare accurate holes with suitable Drill Accessories.

► Trade-pack quantities across selected configurations
► Scell-it blind-rivet construction across documented ICCONS families
► Aluminium alloy body options
► Zinc-plated low-carbon steel mandrels across aluminium/steel families
► Standard dome-head configurations
► Multigrip options for wider material ranges
► Selected painted finishes for visible sheet-metal work
► Installation from the accessible side of suitable assemblies
► Hand & cordless rivet-tool compatibility across applicable sizes
► Practical for manufacturing, maintenance, assembly & repairs

What Are ICCONS® Rivets Trade Packs?

Compact packaging makes stock easier to manage but the connection still determines which rivet belongs in the hole.

ICCONS packages selected Scell-it blind rivets in trade quantities suited to workshops, service vehicles, maintenance stores & smaller production runs where carrying bulk cartons of every configuration may be unnecessary.

Across the documented aluminium/steel families, standard dome-head rivets use aluminium alloy bodies with zinc-plated low-carbon steel mandrels while multigrip versions provide a wider working grip range.

That wider range becomes useful when material thickness varies between otherwise similar assemblies.

Before choosing a pack, establish:

► Material combination
► Combined material thickness
► Rivet body diameter
► Required grip range
► Drill diameter
► Head style
► Finish or colour
► Installation volume

For a broader look at fastening choices used across trade work, read the Fastener Guide Bolts Screws Anchors.

Rear Access Can Decide the Fastening Method

A panel may be easy to position yet impossible to reach from behind once it enters the assembly.

Blind riveting addresses that problem by allowing the fastener to be installed from the accessible face.

That characteristic makes rivets useful across suitable:

► Sheet-metal fabrication
► Covers & enclosures
► Panels
► Manufactured components
► Workshop assemblies
► Maintenance repairs
► Light fabrication
► General repair work

Unlike a bolt & nut connection, the installer does not need to position a separate nut behind the material during setting.

For jobs where removable threaded hardware is more appropriate, Bolts & Fasteners provides additional fastening options.

Standard Dome Head or Multigrip?

Consistent material thickness calls for a different rivet choice from repair work that encounters several panel combinations every week.

Selection Point

Standard Dome Head

Multigrip

Head style

Dome

Dome

Mandrel across documented aluminium/steel families

Zinc-plated steel

Zinc-plated steel

Grip behaviour

Defined by exact configuration

Extended grip range

Useful when

Material stack is known & repeatable

Material thickness varies

Stock approach

Dedicated sizes for specific joints

Wider coverage from fewer sizes

Typical users

Production & repetitive assembly

Maintenance, repair & mixed fabrication

ICCONS states that a suitable multigrip rivet can substitute for up to three conventional rivet sizes.

For service vehicles carrying consumables for varied repairs, that wider range can reduce the number of individual configurations needed for suitable connections.

Measure the Joint Before Selecting the Rivet

A rivet does not grip the first sheet or second sheet independently; it has to accommodate the combined thickness of the connection.

Grip range is therefore one of the first specifications worth checking.

Documented ICCONS multigrip examples include:

Example

Body Diameter

Grip Range

4-1/3 multigrip

3.2 mm

0.8–4.8 mm

5-1/4 multigrip

4.0 mm

1.2–6.4 mm

Other configurations cover different material ranges.

Measure every layer captured by the rivet then compare that total against the exact product specification.

When fabrication work contains numerous fixing centres or changing material dimensions,  Measuring & Layout Tools can help keep preparation accurate.

A Correct Rivet Still Needs a Correct Hole

Poor hole preparation can compromise a well-selected fastener before the rivet tool even reaches the mandrel.

ICCONS publishes drill diameter alongside its rivet specifications.

Relevant 3.2 mm body configurations, for example, specify a 3.3 mm (#30) drill diameter.

Before setting:

► Confirm the specified drill diameter
► Drill through the complete material stack
► Keep the drill square
► Remove excessive burrs
► Clear drilling debris
► Bring the components together
► Check access for the riveter

Do not automatically match the drill bit to the nominal rivet body diameter.

Use the specified hole size for the exact rivet being installed.

Why Carry Rivets in Trade Packs?

A service vehicle carrying several useful rivet configurations needs organised stock more than oversized quantities of every size.

Trade packs can suit crews that need practical quantities while keeping different diameters, grip ranges & finishes identifiable.

They can be particularly useful where:

► Several rivet sizes travel in one service vehicle
► Maintenance stock is divided between technicians
► Painted rivets need to remain separated
► A workshop has dedicated assembly stations
► Smaller production runs use different configurations
► Replacement stock needs straightforward identification

Pack quantity should follow expected consumption while the connection determines the rivet inside it.

For specialised fastening requirements beyond conventional blind riveting, browse Specialty Fasteners & Fixings.

Colour-Matched Heads Matter on Finished Sheet

A mechanically correct rivet can still look out of place when its head contrasts sharply against a finished panel.

ICCONS offers painted aluminium/steel rivets across numerous COLORBOND colours, allowing selected visible fasteners to coordinate more closely with surrounding sheet finishes.

A documented painted 4-1/3 multigrip configuration, for example, combines:

► 3.2 mm body diameter
► 3.3 mm (#30) drill diameter
► 0.8–4.8 mm grip range
► Aluminium body
► Zinc-plated steel mandrel
► Painted dome head

Mechanical suitability comes first.

Confirm diameter, grip range & hole preparation before selecting the colour.

Multigrip Rivets Can Simplify Service-Vehicle Stock

Repair work rarely presents every technician with the same two sheets at the same thickness.

One call-out may involve a thin cover while another combines overlapping panels, brackets or enclosure components.

Where the material stack remains inside the documented range, multigrip rivets provide broader coverage than a conventional rivet selected around a narrower grip window.

That can benefit:

► Maintenance technicians
► Mobile repair teams
► Manufacturing support crews
► General fabrication workshops
► Service departments

Reduced stock variety is useful only when the selected rivets remain suitable for the connections encountered.

For practical preparation before busy workshop or site periods, see Spring Jobsite Prep Getting Your Gear Ready.

Diameter & Grip Range Answer Different Questions

Two measurements on the same rivet describe different parts of the installation.

Body diameter relates directly to the rivet body & required hole preparation.

Grip range describes the combined material thickness the selected configuration is designed to accommodate.

Record both whenever a rivet will need to be reordered.

A useful workshop specification includes:

► Rivet family
► Body diameter
► Grip range
► Drill diameter
► Head style
► Material combination
► Finish or colour
► Pack quantity

Writing only “aluminium rivet” leaves too many details unresolved for reliable replenishment.

What Happens When the Riveter Pulls the Mandrel?

The visible dome head remains at the front while the fastening action develops behind the material.

After the rivet body enters the prepared hole, the riveter grips & pulls the mandrel while the nosepiece supports the rivet head.

That action deforms the rivet body on the blind side, bringing the joined components together.

Once the rivet reaches its set condition, the mandrel breaks at its designed point during installation.

The resulting mechanical connection can be completed without positioning a separate nut behind the work.

This makes blind riveting particularly practical where panels, enclosures or assembled components restrict rear access.

Hand Riveter or Cordless Riveter?

Ten repair rivets & several hundred production rivets place very different demands on the person setting them.

Applicable Scell-it rivets can be installed with suitable hand or powered blind-rivet tools where the selected fastener falls within the tool's stated capacity.

Hand tools can make sense for:

► Occasional maintenance
► Smaller repairs
► Low-volume assembly
► Portable kits

Powered riveting becomes more attractive as repetitive volume increases.

Regardless of the setting tool, accurate hole preparation remains essential. Browse Power Tool Accessories when preparing drilling equipment for repeated fabrication & assembly work.

Before production begins, confirm the correct nosepiece, rivet capacity & tool condition.

Production Work Magnifies Small Selection Errors

One mismatched rivet may cost a minute; the same mistake across fifty assemblies can create substantial rework.

Manufacturing teams benefit from defining the required fastener before the assembly reaches the workstation.

Separate packs by:

► Body diameter
► Grip range
► Standard or multigrip
► Finish
► Colour
► Assembly number
► Workstation

Clear identification helps prevent a visually similar rivet with a different grip range from entering the wrong joint.

When the connection repeats throughout a product, the first confirmed assembly provides a useful reference for the remainder of the run.

Repairs Begin With the Hole That Exists Now

Removing an old rivet reveals what was installed but the surrounding material may no longer match its original condition.

Once the failed or damaged fastener is drilled out, inspect the existing hole before selecting the replacement.

Look for:

► Hole enlargement
► Elongation
► Burrs
► Material cracking
► Distortion
► Corrosion
► Loose mating surfaces

A replacement rivet that resembles the original cannot correct damaged parent material by itself.

Where the hole or surrounding component has changed, reassess the connection before setting another fastener.

Visible Rivet Lines Reward Accurate Layout

A straight, evenly spaced rivet line can contribute to a clean finished panel while inconsistent positioning becomes immediately noticeable.

For visible sheet work, careful spacing & controlled hole preparation help produce a more consistent result.

Before drilling:

► Establish fixing centres
► Mark the complete run
► Check edge distances
► Confirm component alignment
► Verify colour where applicable
► Drill consistently

Accurate preparation also reduces the likelihood of forcing a rivet through poorly aligned material.

For more practical guidance on choosing dependable fastening hardware, read Why Good Fasteners Matter More Than the Tool You Drive Them With.

Aluminium/Steel Does Not Identify the Whole Rivet

Material description narrows the choice but it does not tell you the diameter, grip range, head finish or required hole size.

Within ICCONS' documented range, the same broad material combination can appear across different diameters, body lengths, grip ranges, colours & rivet styles.

Two packs can therefore look closely related while serving different material stacks.

Check:

► Exact rivet type
► Diameter
► Length
► Grip range
► Required drill diameter
► Finish
► Colour where relevant

Complete identification becomes especially important when several rivet packs share the same workshop drawer or service vehicle.

Three Workshop Habits for More Consistent Riveting

Prove the First Joint

A single completed connection can expose a sizing or preparation problem before it spreads through an entire production run.

Set one rivet through representative material then inspect the head seating, material clamping & overall connection.

Keep the Correct Drill With the Rivet Stock

Pairing the specified drill size with the relevant rivet pack reduces unnecessary guesswork between workstations.

Replace worn drills before poor hole quality becomes routine.

Record the Successful Configuration

A confirmed rivet specification makes the next production batch or repair easier to reproduce.

Keep the configuration with the drawing, job record or maintenance history.

Match the Rivet Style to the Work Pattern

Repeated Assembly With One Material Thickness

Consistency makes a standard dome-head configuration practical when the same material stack repeats throughout production.

Repairs Across Several Material Thicknesses

Variation gives multigrip rivets their advantage where one documented grip range can accommodate several suitable joints.

Painted Panels or Visible Sheet

Appearance becomes another consideration once the fastener head remains exposed on the finished surface.

Mobile Maintenance Stock

Compact packs make useful configurations easier to separate, identify & replenish between call-outs.

Choose from the joint outward rather than from the packaging inward.