Blind Fastening Options for Sheet Metal, Panels & Fabricated Assemblies
When only one face of an assembly remains accessible, a blind rivet can complete the connection without requiring a nut, spanner or second operator behind the work. ICCONS® | Rivets include Scell-it fastening options for manufacturing, maintenance, fabrication, assembly & repair, with families covering aluminium/steel, steel/steel, aluminium/aluminium, standard dome-head, multigrip, painted & sealed-head configurations.
Material combination matters just as much as rivet diameter. A fabricator joining steel components may have different requirements from a technician repairing aluminium sheet or an installer working on ducting where a sealed connection is important. Start with Rivets & Fixings, compare related options through Rivets & Screw Posts or prepare accurate holes with suitable Drill Accessories.
► Blind installation from the accessible face
► Aluminium/steel rivet configurations
► Steel/steel options for suitable steel applications
► Aluminium/aluminium configurations where a steel mandrel is undesirable
► Standard dome-head profiles
► Wider-range multigrip configurations
► Sealed-head options for suitable air & water control applications
► Painted finishes across selected families
► Hand & cordless rivet-tool compatibility across applicable sizes
► Applications spanning fabrication, manufacturing, maintenance & repairs
What Are ICCONS® Rivets?
Blind riveting provides a practical fastening method when conventional access to both sides of the work is unavailable.
The rivet is inserted through a prepared hole from the accessible side. A compatible rivet tool pulls the mandrel while supporting the head, causing the rivet body to form behind the joined material before the mandrel reaches its break point.
No separate nut needs to be positioned behind the assembly during installation.
This makes blind rivets useful across suitable:
► Sheet-metal assemblies
► Manufactured components
► Enclosures
► Ducting
► Steel framing components
► Garage-door manufacture
► Ladders
► Maintenance repairs
► General fabrication
For more information about fastening methods used across construction & fabrication, read the Fastener Guide Bolts Screws Anchors.
Aluminium/Steel, Steel/Steel or Aluminium/Aluminium?
Rivet material changes what is being installed even when two fasteners appear similar on the bench.
Different Scell-it rivet families use different body & mandrel combinations.
|
Rivet Family
|
Construction
|
Selection Consideration
|
|
Aluminium/steel dome head
|
Aluminium alloy body with zinc-plated low-carbon steel mandrel
|
General manufacturing, maintenance, assembly & repair
|
|
Aluminium/steel multigrip
|
Aluminium alloy body with zinc-plated low-carbon steel mandrel
|
Wider grip range across varying material stacks
|
|
Steel/steel dome head
|
Zinc-plated steel body with zinc-plated low-carbon steel mandrel
|
Suitable steel assemblies
|
|
Aluminium/aluminium dome head
|
Aluminium alloy body with aluminium alloy mandrel
|
Applications where a steel mandrel is undesirable
|
|
Aluminium/steel sealed head
|
Aluminium alloy body with plated steel mandrel
|
Suitable connections where air or water sealing is important
|
Choose the material combination around the assembly rather than treating every rivet of the same diameter as equivalent.
Same Diameter Doesn't Mean the Same Rivet
Two rivets can share the same body diameter yet accommodate different material thicknesses.
Grip range describes the combined material thickness a particular rivet configuration is intended to accommodate.
Consider two 4.8 mm aluminium/steel dome-head examples:
► A 6-6 configuration uses a 4.9 mm (#11) drill & covers a 7.9–9.5 mm grip range
► A 6-8 configuration uses the same nominal 4.8 mm body diameter & 4.9 mm (#11) drill but covers a 9.5–12.7 mm grip range
The body diameter remains the same while the suitable material stack changes.
Measure the complete assembled thickness before choosing the rivet length.
Where Multigrip Rivets Make Sense
Changing material thickness can create unnecessary stock complexity when every joint requires a separate conventional rivet length.
Multigrip rivets provide an extended grip range, allowing a suitable configuration to cover more material-thickness combinations than a conventional rivet with a narrower range.
They can be useful for:
► Maintenance departments handling varied repairs
► Fabricators working across changing sheet combinations
► Service vehicles carrying limited consumable stock
► Assembly work involving several suitable material stacks
► Workshops reducing closely related rivet sizes
The wider range does not remove the need to measure the connection.
Always confirm that the complete material stack falls inside the grip range of the selected rivet.
Sealed-Head Rivets Serve a Different Purpose
Some connections need more than mechanical fastening alone.
Sealed-head rivets provide an option for suitable applications where controlling the passage of air or water through the fastener is important.
Typical applications can include:
► Ducting
► Water tanks
► Suitable marine fabrication
The sealed-head aluminium/steel family uses an aluminium alloy body with a plated steel mandrel.
Applicable 4.8 mm configurations use a 4.9 mm (#11) drill while grip range changes according to the selected rivet length.
Where sealing forms part of the connection requirement, establish that before choosing a conventional open blind rivet simply because its diameter matches the hole.
Steel/Steel & Aluminium/Aluminium Solve Different Requirements
Looking at the materials being joined can quickly narrow the suitable rivet family.
Steel/steel dome-head rivets provide an option for suitable steel applications including framing components, internal steel partitioning, ladders & garage-door manufacture.
Aluminium/aluminium rivets address a different requirement. Their aluminium mandrel avoids the steel mandrel found in aluminium/steel configurations, making them useful where a steel mandrel is undesirable.
Material combination should therefore be treated as a functional specification rather than a secondary product detail.
For less conventional fastening requirements, browse Specialty Fasteners & Fixings.
Hole Preparation Starts the Connection
A well-selected rivet still depends on a correctly prepared hole.
Different rivet body diameters require corresponding hole dimensions.
Examples across applicable configurations include:
► 3.2 mm rivet bodies using a 3.3 mm (#30) drill
► 4.0 mm rivet bodies using a 4.1 mm (#20) drill
► 4.8 mm rivet bodies using a 4.9 mm (#11) drill
Check the specification for the exact rivet before drilling.
A hole that is oversized, distorted or poorly aligned changes the conditions around the fastener.
Before setting the rivet:
► Align the components
► Mark the fixing position
► Confirm the required drill diameter
► Drill square to the work where practicable
► Remove problematic burrs
► Clear swarf
► Check that the mating surfaces are correctly positioned
Accurate preparation gives the rivet the conditions needed for a consistent installation.
Prove One Connection Before Completing the Run
One representative rivet can reveal a selection or preparation problem before dozens of holes are drilled.
Use the actual materials intended for the job then inspect the first completed connection.
Check:
► Head seating
► Material clamping
► Hole fit
► Grip-range suitability
► Finished appearance
► Riveter operation
If the first connection does not look or feel correct, investigate before continuing across the panel.
For repetitive fixing positions, Measuring & Layout Tools can assist with accurate marking & set-out.
Painted Rivets Can Reduce Contrast on Finished Sheet
Visible fasteners become part of the finished appearance when their heads remain exposed.
Painted versions are available across selected aluminium/steel dome-head & multigrip rivet families.
For suitable visible work, this allows the rivet head to coordinate more closely with the surrounding sheet or panel.
Choose the mechanical requirements first:
► Rivet material
► Body diameter
► Grip range
► Required drill size
► Head type
► Application suitability
Then select an available colour appropriate to the finished surface.
A matching colour should complement the connection rather than compensate for the wrong rivet specification.
Measure Everything Captured by the Rivet
The grip range applies to the complete joint rather than one individual sheet.
If two sheets overlap, include both thicknesses.
If a bracket sits between them, include the bracket.
Where several layers are captured by one fastener, measure the complete assembled thickness at that fixing point.
That total needs to sit within the documented grip range of the selected configuration.
Repair work deserves the same attention. Added material, distortion or previous modifications can mean the existing assembly no longer matches its original specification.
An Old Rivet Hole Can Tell You Plenty
Before installing a replacement, inspect what the failed or removed fastener has left behind.
Look for:
► Hole elongation
► Enlarged diameter
► Cracking
► Distorted sheet
► Corrosion
► Burr damage
► Misaligned components
If the parent material has deteriorated, determine whether the original connection can still be restored appropriately.
Installing another identical rivet should not be used as a substitute for assessing damaged material.
Hand Riveter or Cordless Riveter?
Installation volume often determines which compatible tool is practical once the correct rivet has been selected.
Applicable Scell-it rivets can be installed with suitable hand or powered blind-rivet equipment where the particular rivet falls within the tool's stated capacity.
Hand tools can suit:
► Maintenance kits
► Occasional repairs
► Small fabrication jobs
► Low-volume assembly
Cordless riveting equipment can become more practical as installation volume increases.
Before starting, confirm the rivet size, nosepiece & tool capacity are compatible.
Related equipment & consumables can be found through Power Tool Accessories.
Give Repeat Work a Proper Rivet Specification
A loose sample sitting in a drawer leaves too many details open to interpretation when the next order is placed.
For recurring fabrication or assembly work, record:
► Rivet family
► Part number where known
► Body material
► Mandrel material
► Diameter
► Length
► Grip range
► Drill diameter
► Head type
► Finish or colour
► Required quantity
A written record helps distinguish visually similar fasteners used across different assemblies.
For practical discussion around fastener quality & selection, read Why Good Fasteners Matter More Than the Tool You Drive Them With.
Which Rivet Family Fits the Work?
General Sheet & Component Assembly
Consistent material thickness can suit a conventional dome-head rivet selected to the required diameter & grip range.
Mixed Maintenance Repairs
Changing material stacks make multigrip configurations useful where the documented range covers the connections being repaired.
Steel Assemblies
Steel/steel rivets provide a dedicated material combination for suitable steel applications.
Applications Where a Steel Mandrel Is Undesirable
Aluminium/aluminium construction provides an alternative to the steel mandrel found in aluminium/steel configurations.
Ducting, Tanks & Suitable Marine Work
Sealed-head configurations address connections where controlling air or water passage through the fastener is important.
Visible Coloured Sheet
Painted rivet heads can provide a more integrated appearance when the fixing remains exposed.
Know When to Choose Another Fastener
Riveting is valuable for blind-side access but it is not automatically the right connection for every assembly.
Connections requiring regular disassembly may be better served by threaded hardware.
Primary structural work or specialised engineered connections can require entirely different fastening systems.
Service conditions, material thickness & the intended life of the assembly should guide the choice.
For removable threaded connections, compare Bolts & Fasteners.