All-Metal Fixing for Insulation to Masonry
Insulation can only perform as intended when its fixing method suits both the insulation system & the material behind it. ICCONS® Toge TID Metal Insulation Nails provide an all-metal nail-in fixing for securing compatible insulation to masonry substrates including concrete, solid brick, aerated concrete & solid stone.
Made with a high-quality galvanised steel body, the TID Metal range provides a direct mechanical approach where the fixing needs to pass through the insulation & engage with the supporting masonry. Available in 80, 110 & 140 mm lengths, the range accommodates different insulation build-ups while dedicated installation tooling & optional finishing caps support efficient installation.
When preparing the wider fixing package, Anchors & Wall Plugs, Concrete Cutting & Drilling Tools & Drill Accessories provide relevant options for masonry drilling & fastening work.
What Are ICCONS® Metal Insulation Nails?
ICCONS® Toge TID Metal Insulation Nails are nail-in anchors specifically designed for insulation fixing rather than general-purpose nailing. Their galvanised steel construction provides an all-metal fixing body for compatible masonry applications.
The current range includes:
► TIDSMETAL08080 – Metal Insulation Nail 8 x 80 mm
► TIDSMETAL08110 – Metal Insulation Nail 8 x 110 mm
► TIDSMETAL08140 – Metal Insulation Nail 8 x 140 mm
ICCONS® also lists the TIDS-INST installation tool for the system, together with optional black, grey & white plastic caps where the finished appearance calls for a covered fixing head.
These components form a purpose-specific insulation fixing system. Nail length should correspond with the insulation build-up & required fixing arrangement rather than being chosen as a general masonry fastener.
Why Choose ICCONS® Metal Insulation Nails?
All-Metal Galvanised Steel Construction
Material choice becomes important when insulation is mechanically retained against masonry. Toge TID Metal Insulation Nails use a high-quality galvanised steel body, providing a dedicated metal alternative to conventional plastic insulation fixings.
This construction makes the range suitable where the specified insulation system calls for an all-metal mechanical fixing.
Three Lengths for Different Insulation Build-Ups
An 80 mm fixing & a 140 mm fixing address distinctly different dimensional requirements. The three available lengths allow installers to accommodate changes in the insulation build-up while retaining the same TID Metal fixing system.
Additional length isn't automatically beneficial—the selected nail still needs to suit the complete assembly & receiving substrate.
Suitable for Multiple Masonry Substrates
Concrete isn't the only material encountered behind insulation systems. ICCONS® identifies the TID Metal range for concrete, solid brick, aerated concrete & solid stone.
Because these materials behave differently during drilling & fixing, the receiving substrate should be identified before repetitive installation begins.
Practical Installation Across Larger Areas
Large insulation elevations can multiply a small inefficiency at each fixing point into considerable labour across the project. ICCONS® describes the TID Metal system as quick & easy to install, supported by its dedicated installation tool.
Correct hole preparation, nail length & substrate identification should be established before crews begin working systematically across the elevation.
Optional Caps for Visible Fixing Heads
Fixing heads may remain visible during construction or in finished areas where presentation matters. ICCONS® provides optional black, grey & white plastic caps for the TID Metal range.
The cap colour can be coordinated with the surrounding surface without changing the underlying metal insulation fixing.
Common Applications
Concrete Walls
Rigid insulation installed against concrete requires a fixing that reaches through the insulation & engages with the supporting material behind it. TID Metal Insulation Nails provide a mechanical connection into suitable concrete where the selected length & installation requirements correspond with the insulation system.
Before drilling repeated fixing points, confirm the fixing pattern, insulation thickness & required installation arrangement.
Solid Brickwork
Insulation over solid masonry presents a different fixing environment from framed construction. ICCONS® identifies solid brick as a suitable TID Metal application, providing an all-metal nail-in option for compatible insulation systems.
Hollow brick shouldn't be treated as equivalent simply because the finished wall surface appears similar.
Aerated Concrete
Lightweight masonry should be identified before drilling begins rather than after a fixing behaves differently from expected. Aerated concrete is among the base materials ICCONS® identifies for TID Metal Insulation Nails.
Installation should account for the characteristics of the receiving material rather than automatically copying a method used for dense concrete.
Solid Stone
Refurbishment & specialist construction can expose substrates beyond standard concrete or brickwork. ICCONS® includes solid stone among the suitable base materials for the TID Metal system.
Where substrate condition is uncertain, verify the actual receiving material before committing to repeated installation.
Wall & Building-Envelope Insulation
Mechanical fixing forms one part of the complete insulation build-up. Board type, thickness, substrate, fixing pattern & subsequent finishing layers need to work together rather than treating the insulation nail as an isolated component.
For consistent fixing-point positioning across larger wall areas, Measuring & Leveling Tools can assist with accurate set-out.
Product Selection Guide
Begin with the distance between the fixing head & the supporting masonry. Once the insulation build-up is understood, the appropriate nail length can be checked against the required installation arrangement.
|
ICCONS® Part
|
Nominal Size
|
Construction
|
Suitable Base Materials
|
|
TIDSMETAL08080
|
8 x 80 mm
|
Galvanised steel
|
Concrete, solid brick, aerated concrete & solid stone
|
|
TIDSMETAL08110
|
8 x 110 mm
|
Galvanised steel
|
Concrete, solid brick, aerated concrete & solid stone
|
|
TIDSMETAL08140
|
8 x 140 mm
|
Galvanised steel
|
Concrete, solid brick, aerated concrete & solid stone
|
Choosing Between 80, 110 & 140 mm
Insulation depth creates the first practical distinction between the three configurations. TIDSMETAL08080 provides the shortest option, TIDSMETAL08110 adds 30 mm of overall length & TIDSMETAL08140 extends the range to 140 mm.
Confirm the complete fixing arrangement rather than calculating the required nail solely from insulation thickness.
Metal Insulation Nail or Conventional Masonry Anchor?
Both enter masonry, but they're designed around different materials being retained. A TID Metal nail is purpose-built for insulation, while a conventional masonry anchor may be intended for brackets, fixtures or other components.
Using an insulation-specific fixing avoids assuming that a general masonry anchor automatically provides the appropriate retention arrangement for insulation material.
TID Metal or PX Insulation Fastener?
Similar applications don't make these ICCONS® systems interchangeable. Toge TID Metal is a nail-in masonry insulation anchor supplied in 8 x 80, 8 x 110 & 8 x 140 mm configurations.
ICCONS® PX insulation products form part of a low-velocity powder-actuated fastening system. They use different fasteners, installation equipment & application requirements.
Substrate, insulation system, installation method & project requirements determine which approach is appropriate.
Fixing Insulation to Steel Framing?
Moving from masonry to steel framing changes the fastening requirement. TID Metal products shouldn't be transferred to a steel-frame application simply because insulation is involved.
For fastening systems used across steel-frame construction, browse Specialty Fasteners & Fixings.
Expert Tips
Identify the Substrate Before Covering the Wall
Once insulation is positioned, confirming what sits behind it becomes considerably less convenient. Establish whether the receiving material is concrete, solid brick, aerated concrete or solid stone before fixing progresses.
On refurbishment projects, verify existing construction where practical rather than relying solely on assumptions about concealed wall materials.
Allocate Nail Lengths by Insulation Zone
Different insulation thicknesses across one project can easily send the wrong fixing length to the wrong elevation. Review the build-up first, then allocate 80, 110 or 140 mm fixings to their corresponding work areas.
Clear separation at the staging point can reduce repeated checking once installation is underway.
Keep TIDS-INST with the Fixing Equipment
A dedicated installation tool is most useful when it arrives at the workface with the fasteners it supports. ICCONS® lists the TIDS-INST Metal Installation Tool specifically for the TID Metal system.
Keep it with the insulation-fixing equipment rather than mixing it into unrelated masonry tooling.
Decide on Cap Colour Before Finishing Begins
Small fixing heads become visually repetitive when multiplied across a large surface. ICCONS® offers compatible plastic caps in black, grey & white where a covered finish is required.
Confirm the intended appearance early so the appropriate caps are available during installation.
Distinguish Solid Brick from Hollow Masonry
“Brick wall” doesn't provide enough information to establish fixing suitability. ICCONS® identifies solid brick for the TID Metal range, making the distinction from hollow masonry important.
If the substrate changes, reassess the fixing method before continuing into the next area.
For broader guidance on common construction fixing families, read the Fastener Guide Bolts Screws Anchors.
Protect the Insulation Around Each Fixing
Mechanical retention shouldn't unnecessarily compromise the material it is intended to secure. Follow the installation requirements for the insulation system & seat the fixing appropriately against the material.
A sound result depends on retaining the insulation while maintaining the condition of the surrounding board or layer.
Prepare Repetitive Fixing Work Before Drilling
An elevation containing hundreds of fixing points benefits from organised preparation. Establish locations, nail lengths, drilling equipment, installation tooling & finishing components before crews begin progressing across the wall.
For practical preparation ahead of demanding construction periods, see Spring Jobsite Prep Getting Your Gear Ready.
