Controlled Chemical Anchoring in Hollow Masonry
What happens when injection adhesive enters a hollow block without anything to contain it? Instead of remaining around the fixing, resin can escape into the cavity. ICCONS® | Mesh Sleeves provide a practical way to retain compatible injection adhesive around an anchor within suitable hollow masonry.
Designed for hollow brick, concrete block & hollow slab applications, ICCONS® Chemselect Mesh Sleeves are supplied in 1 metre lengths that can be cut to suit the required anchor length. This gives builders, installers & maintenance crews flexibility when fixing depths or anchor sizes vary across a project.
For the wider installation system, explore Adhesives & Tapes, Anchors & Wall Plugs & Drill Accessories.
What Are ICCONS® Mesh Sleeves?
ICCONS® Chemselect Mesh Sleeves are installation accessories used with compatible injection adhesives when anchoring into hollow base materials. Their role is to contain adhesive around the anchor rather than allowing excessive resin to pass into an open cavity.
Once the sleeve is positioned, compatible injection adhesive is introduced into the mesh & the selected anchor is inserted according to the applicable installation requirements. The sleeve helps keep the adhesive within the intended fixing zone.
Available Chemselect mesh-sleeve configurations include:
► CSM121000 – 11 x 1000 mm mesh sleeve for M8 stud applications, requiring a 12 mm drilled hole
► CSM161000 – 15 x 1000 mm mesh sleeve for M10/M12 stud applications, requiring a 16 mm drilled hole
► CSM221000 – 21 x 1000 mm mesh sleeve for M16 stud applications, requiring a 22 mm drilled hole
The 1000 mm format gives installers control over the prepared sleeve length. Instead of being restricted to one predetermined depth, the mesh can be cut according to the required anchor arrangement.
For broader guidance on selecting fastening systems around different materials, read the Fastener Guide Bolts Screws Anchors.
Why Choose ICCONS® Mesh Sleeves?
Keep Resin Around the Fixing
A hollow cavity changes what happens as soon as adhesive leaves the nozzle. Without suitable containment, resin can move away from the intended anchor position rather than remaining concentrated around the fixing.
A correctly selected Chemselect mesh sleeve helps retain adhesive where the anchor is being formed.
Control Unnecessary Adhesive Consumption
Using more resin doesn't improve an installation when the excess is simply disappearing into an empty cavity. Chemselect mesh sleeves help control adhesive placement around the fixing while reducing unnecessary resin consumption.
This can be particularly useful across repetitive hollow-masonry anchoring work.
Cut Each Sleeve Around the Anchor Requirement
Variable fixing depths don't necessarily require a different sleeve product every time. Chemselect mesh sleeves are supplied in 1000 mm lengths, allowing material to be cut according to the anchor length required for the installation.
That flexibility is useful on refurbishment, fit-out & mixed fixing projects where conditions aren't identical at every location.
Cover M8 Through to M16 Applications
Stud diameter provides a practical starting point for selecting the sleeve. The range accommodates M8, M10/M12 & M16 anchors, with corresponding mesh & drilled-hole dimensions.
Checking the anchor first helps prevent the wrong sleeve or drill diameter being prepared.
Build the Complete Chemical Anchoring Setup
The sleeve is only one component of the finished connection. A chemical anchoring installation also depends on the injection adhesive, threaded anchor, substrate, hole preparation & applicable installation requirements.
Consider these components together rather than choosing the mesh sleeve in isolation.
Common Applications
Hollow Brick
A brick face can conceal open cells immediately behind the drilled surface. Mesh sleeves help contain compatible injection adhesive within the intended fixing zone when installing chemical anchors into suitable hollow brick.
Identify the actual masonry construction before selecting the anchoring arrangement.
Concrete Block
Concrete block shouldn't automatically be treated like solid concrete. Hollow cells can allow adhesive to move away from the anchor unless the installation method accounts for the cavity.
For projects requiring another masonry fastening method, Screws & Anchors provides related fixing options.
Hollow Slab
Cavities aren't limited to vertical masonry walls. Hollow slab applications can also require controlled adhesive placement around the fixing.
Confirm the slab construction, anchor location & complete anchoring arrangement before installation.
Threaded Stud Installation
A mesh sleeve should correspond with the threaded anchor being installed rather than merely fitting inside the hole. Dedicated configurations cover M8, M10/M12 & M16 stud applications.
Related Bolts & Fasteners can support conventional threaded fastening requirements elsewhere across the project.
Construction & Masonry Fixing Work
Chemical anchors are often only one connection type within a larger concrete or masonry package. Builders may be coordinating hollow-block fixings alongside concrete work, structural elements & other specified fastening systems.
Where reinforced concrete construction forms another part of the project, Concrete Reinforcement provides access to related reinforcement products.
Variable-Depth Anchoring
Refurbishment work rarely presents perfectly identical fixing conditions from one location to the next. A 1 metre mesh sleeve allows different sections to be prepared from the same specified diameter where the anchor arrangement requires varying lengths.
Measure & prepare each section around the actual fixing rather than relying on an arbitrary standard cut length.
Product Selection Guide
Start with the threaded anchor rather than the roll of mesh. Once the anchor diameter is known, match the corresponding sleeve size & drilled-hole diameter before preparing the fixing position.
|
Part Number
|
Mesh Sleeve Size
|
Anchor Size
|
Drill Diameter
|
Supplied Length
|
|
CSM121000
|
11 mm
|
M8
|
12 mm
|
1000 mm
|
|
CSM161000
|
15 mm
|
M10/M12
|
16 mm
|
1000 mm
|
|
CSM221000
|
21 mm
|
M16
|
22 mm
|
1000 mm
|
Installing an M8 Anchor?
CSM121000 is the starting point for an M8 configuration. It uses an 11 mm mesh sleeve with a 12 mm drilled hole & is supplied in a 1000 mm length for preparation around the required anchor arrangement.
Working with M10 or M12?
One Chemselect mesh configuration covers these two common stud diameters. CSM161000 is the 15 mm sleeve for M10/M12 anchors, with a corresponding 16 mm drill diameter.
Anchor diameter alone doesn't establish the allowable load or suitability of the finished fixing, so check the complete chemical anchoring specification.
Specifying an M16 Stud?
Moving to M16 also changes the mesh & hole dimensions. CSM221000 provides the 21 mm mesh sleeve for M16 applications with a 22 mm drilled hole.
Use correctly sized drilling equipment from the beginning rather than attempting to correct an undersized hole afterwards. Explore Concrete Cutting & Drilling Tools for related masonry drilling equipment.
Mesh Sleeve or Pre-Sized Plastic Sleeve?
Installation depth provides a useful distinction between the two formats. Chemselect mesh sleeves are supplied in 1000 mm cut-to-length sections, while compatible plastic sleeve systems use predetermined dimensions.
A pre-sized sleeve can be practical where its dimensions correspond with the required installation. Mesh provides greater flexibility where sleeve length needs to follow varying anchor requirements.
Use the sleeve arrangement appropriate to the complete chemical anchoring system rather than substituting one format simply for convenience.
Does a Larger Sleeve Mean a Stronger Anchor?
No. Sleeve diameter doesn't determine the capacity of the finished connection. Performance depends on the complete anchoring system, including the injection adhesive, anchor, masonry, embedment, geometry, installation conditions & applicable technical data.
Structural or specification-sensitive connections should follow the nominated anchoring system.
Expert Tips
Establish Whether the Substrate Is Actually Hollow
The most important selection decision may happen before drilling starts. Determine whether the fixing position contains hollow masonry because an installation method intended for cavities isn't automatically appropriate for solid concrete or solid masonry.
Cut to the Required Installation Length
A metre of mesh provides flexibility, but the prepared length still needs to suit the fixing. Cut each section according to the required anchor arrangement & applicable installation information.
For projects involving multiple fixing depths, keep prepared lengths separated until installation.
Verify the Hole Diameter Before Repetitive Drilling
Confirming the drilling specification before work begins can prevent incorrect hole dimensions & unnecessary rework. Match the required 12 mm, 16 mm or 22 mm drill diameter to CSM121000, CSM161000 or CSM221000 before drilling multiple fixing positions.
For crews preparing tools & consumables ahead of larger installation programs, Spring Jobsite Prep Getting Your Gear Ready provides additional practical preparation guidance.
Keep Cut Sections Identifiable
Once a 1000 mm sleeve has been divided into shorter pieces, the original part number may no longer be obvious. Separate prepared mesh by diameter or intended anchor size so M8, M10/M12 & M16 configurations aren't mixed at the work area.
Don't Use Extra Resin to Compensate for Poor Selection
Excess adhesive isn't a substitute for the correct sleeve, hole or anchor arrangement. The mesh helps contain resin within the intended fixing zone while reducing unnecessary consumption.
Follow the applicable adhesive installation requirements for preparation, injection & anchor placement.
Know the Difference Between Mesh & Mechanical Sleeves
Similar product terminology can describe completely different fastening methods. A Chemselect mesh sleeve is an accessory for injection adhesive anchoring in hollow substrates; it isn't a torque-controlled mechanical sleeve anchor.
That distinction matters when chemical & mechanical fixing systems are both being used on the same project.
Check the Entire Connection Before Installation
A correctly sized mesh sleeve can't compensate for an incompatible adhesive, anchor or substrate. Review the masonry, hole diameter, sleeve, injection adhesive, threaded anchor & installation requirements together.
For further practical guidance on complete fastening-system selection, read Why Good Fasteners Matter More Than the Tool You Drive Them With.