► ICCONS® | Foam Cleaners

Remove Uncured PU Foam & Clean Dispensing Tools Fresh expanding foam is much easier to clean before it cures. ICCONS® | Foam Cleaners are made for cleaning uncured polyurethane foam from compatible FoamFlo dispensing equipment & dealing with fresh foam residue during expanding-foam applications. For builders, installers, maintenance crews &...

Remove Uncured PU Foam & Clean Dispensing Tools

Fresh expanding foam is much easier to clean before it cures. ICCONS® | Foam Cleaners are made for cleaning uncured polyurethane foam from compatible FoamFlo dispensing equipment & dealing with fresh foam residue during expanding-foam applications.

For builders, installers, maintenance crews & trades using PU foam, having the cleaner ready before dispensing begins can make pack-up considerably easier. ICCONS FoamFlo Cleaner is an acetone-based solvent cleaner developed for FoamFlo tools & uncured foam. When preparing the surrounding installation, browse Power Tool Accessories, organise compatible equipment through Drill Accessories or compare Specialty Fasteners & Fixings where additional fixing requirements form part of the work.

► Acetone-based solvent cleaner
► Developed for expanding polyurethane foam cleanup
► Suitable for compatible FoamFlo dispensing tools
► Dilutes uncured foam
► CFC-free formulation
► Documented 500 mL format
► Useful alongside FoamFlo tool-delivery expanding foam
► Intended for use before unwanted PU foam has cured

What Are ICCONS® Foam Cleaners?

Foam cleaner handles polyurethane while the material is still in a condition where solvent cleanup can be effective.

ICCONS FoamFlo Cleaner is an acetone-based solvent cleaner intended for cleaning expanding foam & compatible FoamFlo dispensing tools.

Its documented uses include:

► Cleaning compatible FoamFlo dispensing equipment
► Diluting uncured polyurethane foam
► Removing applicable fresh foam residue
► Supporting cleanup after compatible PU foam application

Timing matters because uncured foam can be removed using FoamFlo Cleaner while cured foam requires mechanical removal.

Once unwanted polyurethane has hardened, the removal method needs to change.

Have the Cleaner Ready Before Dispensing

Looking for cleaner after foam has been left on the equipment wastes valuable cleanup time.

Prepare FoamFlo Cleaner alongside the foam & dispensing equipment before application begins.

Pay particular attention when reusable tools are involved because fresh material can remain around:

► Tool connectors
► Applicator components
► Can connections
► Dispensing equipment
► Areas affected by excess fresh foam

Keeping the required products together makes it easier to deal with residue before it hardens.

For crews organising tools & consumables ahead of larger work stages, Spring Jobsite Prep Getting Your Gear Ready provides practical preparation guidance.

Fresh Foam & Cured Foam Need Different Treatment

Check the condition of the polyurethane before deciding how to remove it.

Foam Condition

Cleanup Approach

Fresh / uncured PU foam

Use FoamFlo Cleaner according to the applicable instructions

Fresh foam on compatible tool components

Clean before curing progresses

Fully cured PU foam

Mechanical removal is required

Uncertain residue

Establish whether the material has cured before proceeding

Do not continue applying solvent in an attempt to dissolve fully cured polyurethane.

Where mechanical removal is required, work carefully around the underlying material to minimise surface damage.

Trigger-Tool Foam Adds the Applicator to the Cleanup Routine

Reusable dispensing equipment remains part of the job after the foam can is removed.

FoamFlo FT750 is a one-component polyurethane foam designed for trigger-tool delivery.

For applicable FoamFlo dispensing-tool cleaning, the process includes:

► Keeping the relevant can upright during removal
► Removing the foam can from the tool
► Applying FoamFlo Cleaner to remaining fresh foam around the can & tool connector
► Connecting the cleaner to the dispensing tool
► Dispensing cleaning fluid through the tool until the foam is cleared

Follow the applicable product, equipment & safety instructions throughout cleaning.

Completing the process while the polyurethane remains uncured makes residue easier to address.

Inspect the Applicator Before Storage

Fresh foam left inside or around dispensing equipment can become a much harder problem by the next job.

Check the compatible tool before putting it away.

Inspect:

► Tool connector
► Can connection
► Dispensing path
► Nose or outlet area
► Visible fresh foam
► Other locations identified in the equipment instructions

Where cleaning is required, complete it before residue hardens.

A clean applicator is also easier to inspect when preparing for its next use.

Manual Straw Foam & Tool-Delivery Foam Finish Differently

The delivery method influences what needs attention once application is complete.

FoamFlo F750 uses a manual straw delivery system while FoamFlo FT750 uses a compatible trigger-tool delivery system.

Before starting, identify:

► Foam product
► Delivery method
► Whether reusable equipment is involved
► Cleaner required
► Protective equipment
► Cleanup procedure

Knowing the setup beforehand helps ensure the right cleaning equipment is already within reach when the work finishes.

Protect Finished Surfaces Before Foam Is Applied

Preventing unwanted contact is preferable to cleaning polyurethane from finished work afterwards.

Consider protecting nearby:

► Painted surfaces
► Flooring
► Frames
► Finished joinery
► Visible metalwork
► Completed fixtures
► Equipment

Suitable protection around the application area can reduce accidental contact with fresh foam.

Cleaner supports good application practice but does not replace controlled dispensing & sensible surface protection.

Deal With Fresh Overspill Promptly

A quick inspection after dispensing can identify unwanted material while it remains manageable.

Look around:

► Openings
► Penetrations
► Frame edges
► Tool connections
► Adjacent surfaces
► Application equipment

Where FoamFlo Cleaner is appropriate, use it according to the applicable instructions while the polyurethane remains uncured.

Avoid spreading fresh foam across a larger area during removal.

Controlled cleanup helps keep a small overspill from becoming a wider finishing problem.

Use Care Around Finished Materials

An acetone-based cleaner should not automatically be assumed suitable for every decorative finish or building material.

Before cleaner contacts an exposed surface, consider:

► Paint
► Coatings
► Plastics
► Laminates
► Sealants
► Finished components
► Other solvent-sensitive materials

Follow the applicable product & safety information.

Where material compatibility is uncertain, do not treat FoamFlo Cleaner as a universal surface solvent.

Penetration Work Can Include Separate Mechanical Fixings

Service openings often combine filling work with anchors, screws or other connections around the same area.

For suitable light-duty masonry requirements, browse  Anchors & Wall Plugs.

Where screws or anchors better suit the fixture, Screws & Anchors provides another fastening option.

Keep the role of expanding foam separate from the mechanical connection supporting the fixture or service.

Accurate Dispensing Reduces Cleanup

Better control at the applicator means less unwanted foam to deal with afterwards.

Before applying expanding foam:

► Assess the cavity
► Protect adjacent finishes
► Prepare the substrate as required
► Follow the foam instructions
► Control the output
► Allow for expansion
► Keep cleaner accessible for fresh residue

Apply the foam with the cavity & surrounding finish in mind.

For practical thinking around dependable tools & consumables, read A tool is not just a tool. It’s a promise..

Store Foam Products & Cleaner Together

Keeping related products together can prevent crews reaching the work area with foam but no suitable cleaner.

Where practical, organise:

► Expanding foam
► Compatible dispensing equipment
► FoamFlo Cleaner
► Required accessories
► Protective equipment
► Current product instructions

Keeping the setup together also makes low cleaner stock easier to notice before another job begins.

In busy vehicles or workshops, identify foam cleaner clearly so it is not confused with unrelated aerosols or solvents.

Handle Foam Cleaner With Appropriate Care

Routine cleanup still involves an acetone-based solvent that requires suitable handling.

Before using FoamFlo Cleaner:

► Read the current label & safety information
► Wear appropriate personal protective equipment
► Provide suitable ventilation
► Observe storage requirements
► Follow applicable site controls
► Keep away from ignition sources as directed

Avoid using solvent cleaner in unsuitable or poorly ventilated conditions.

Keep the relevant safety information available to the people handling the product.

Cured Foam Requires Mechanical Removal

Once polyurethane has fully hardened, the cleaner is no longer the specified removal method.

Before mechanically removing cured foam, consider:

► Surrounding surface
► Accessibility
► Quantity of cured material
► Underlying material
► Risk of scratching or gouging the substrate
► Appropriate removal method

Take particular care around visible finishes.

The aim is to remove unwanted cured material without causing avoidable damage underneath.

Clean Around the Connector Before Flushing

Visible fresh residue around the connection deserves attention before cleaning fluid moves through the dispensing tool.

After removing the applicable foam can, inspect the can & tool connector.

Use FoamFlo Cleaner on remaining fresh foam around the connection according to the applicable instructions then attach the cleaner to the compatible dispensing tool.

Dispense cleaning fluid through the equipment as directed until the remaining foam has been cleared.

This addresses residue around the connection as well as material within the applicable dispensing path.

Keep Foam Cleaner for Its Intended Purpose

FoamFlo Cleaner is specifically intended for uncured expanding polyurethane foam & compatible FoamFlo equipment.

Do not automatically use it for:

► General-purpose degreasing
► Chemical-anchor hole preparation
► Fully cured adhesive removal
► Every type of sealant
► Unverified painted surfaces
► Fully cured PU foam

Different residues & surfaces require different cleaning methods.

For broader information on fixing choices around construction work, read the Fastener Guide Bolts Screws Anchors.

Heavier Connections Need Their Own Fastening System

Foam can fill or seal around an opening while separate hardware carries the fixture or connection.

Where heavier threaded hardware is appropriate, Structural Fasteners & Bolts provides another fastening family to consider.

For broader hardware requirements elsewhere in the installation, Bolts & Fasteners provides additional mechanical fixing options.

Never rely on expanding foam where the installation requires a specified mechanical connection.

Finish the Job With a Short Equipment Check

A consistent pack-up routine can make the next foam application easier to prepare.

Inspect

Look for uncured foam around the applicator, connector & immediate work area.

Clean

Use FoamFlo Cleaner where appropriate while residue remains uncured.

Flush

Where a compatible FoamFlo dispensing tool requires cleaning, follow the specified flushing procedure.

Confirm

Check that applicable fresh residue has been cleared from the equipment.

Store

Return the cleaner, applicator & remaining consumables to suitable storage.

Completing these steps while the work is fresh is easier than discovering hardened residue when the equipment is next required.

Why Source ICCONS® Foam Cleaners Through Industrial Shed?

Having cleaner beside the foam equipment before application helps crews deal with fresh residue while it is still manageable.

Industrial Shed supports builders, installers, maintenance crews & other trades using construction consumables across filling, sealing, penetration & fit-out work.

For businesses coordinating repeat consumable requirements across active jobs, Trade support Solutions provides support for trade purchasing.

Need help confirming the cleaner required for a particular FoamFlo setup? Contact Us with the foam product & applicator being used.

Clean It Before It Cures

Fresh polyurethane gives FoamFlo Cleaner the opportunity to perform the job it was designed to handle.

Keep the cleaner accessible when using compatible expanding-foam systems, protect nearby finishes before dispensing & inspect reusable equipment as soon as application is complete. Where a FoamFlo dispensing tool requires cleaning, follow the applicable procedure while remaining material is still uncured.

Once unwanted foam has hardened, use an appropriate mechanical-removal method rather than relying on solvent cleaner to reverse the cure.

Choose ICCONS Foam Cleaners for cleaning uncured expanding PU foam & compatible FoamFlo dispensing equipment as part of a properly prepared foam application.

Frequently Asked Questions

What is ICCONS FoamFlo Cleaner designed to remove?

FoamFlo Cleaner is intended for cleaning uncured expanding polyurethane foam & compatible FoamFlo dispensing tools.

Is FoamFlo Cleaner acetone based?

Yes. FoamFlo Cleaner is an acetone-based solvent cleaner.

Will FoamFlo Cleaner remove fully cured expanding foam?

No. Cured polyurethane foam requires mechanical removal.

What size is ICCONS FoamFlo Cleaner?

The documented FoamFlo Cleaner is supplied in a 500 mL format.

Can FoamFlo Cleaner be used when cleaning FoamFlo trigger-tool equipment?

Yes. Follow the applicable cleaning procedure for compatible FoamFlo dispensing equipment.

Why is cleaning before the foam cures important?

Uncured foam can be addressed with FoamFlo Cleaner according to the applicable instructions. Once polyurethane cures, mechanical removal is required.

Brands

► ICCONS® | Foam Cleaners

Remove Uncured PU Foam & Clean Dispensing Tools

Fresh expanding foam is much easier to clean before it cures. ICCONS® | Foam Cleaners are made for cleaning uncured polyurethane foam from compatible FoamFlo dispensing equipment & dealing with fresh foam residue during expanding-foam applications.

For builders, installers, maintenance crews & trades using PU foam, having the cleaner ready before dispensing begins can make pack-up considerably easier. ICCONS FoamFlo Cleaner is an acetone-based solvent cleaner developed for FoamFlo tools & uncured foam. When preparing the surrounding installation, browse Power Tool Accessories, organise compatible equipment through Drill Accessories or compare Specialty Fasteners & Fixings where additional fixing requirements form part of the work.

► Acetone-based solvent cleaner
► Developed for expanding polyurethane foam cleanup
► Suitable for compatible FoamFlo dispensing tools
► Dilutes uncured foam
► CFC-free formulation
► Documented 500 mL format
► Useful alongside FoamFlo tool-delivery expanding foam
► Intended for use before unwanted PU foam has cured

What Are ICCONS® Foam Cleaners?

Foam cleaner handles polyurethane while the material is still in a condition where solvent cleanup can be effective.

ICCONS FoamFlo Cleaner is an acetone-based solvent cleaner intended for cleaning expanding foam & compatible FoamFlo dispensing tools.

Its documented uses include:

► Cleaning compatible FoamFlo dispensing equipment
► Diluting uncured polyurethane foam
► Removing applicable fresh foam residue
► Supporting cleanup after compatible PU foam application

Timing matters because uncured foam can be removed using FoamFlo Cleaner while cured foam requires mechanical removal.

Once unwanted polyurethane has hardened, the removal method needs to change.

Have the Cleaner Ready Before Dispensing

Looking for cleaner after foam has been left on the equipment wastes valuable cleanup time.

Prepare FoamFlo Cleaner alongside the foam & dispensing equipment before application begins.

Pay particular attention when reusable tools are involved because fresh material can remain around:

► Tool connectors
► Applicator components
► Can connections
► Dispensing equipment
► Areas affected by excess fresh foam

Keeping the required products together makes it easier to deal with residue before it hardens.

For crews organising tools & consumables ahead of larger work stages, Spring Jobsite Prep Getting Your Gear Ready provides practical preparation guidance.

Fresh Foam & Cured Foam Need Different Treatment

Check the condition of the polyurethane before deciding how to remove it.

Foam Condition

Cleanup Approach

Fresh / uncured PU foam

Use FoamFlo Cleaner according to the applicable instructions

Fresh foam on compatible tool components

Clean before curing progresses

Fully cured PU foam

Mechanical removal is required

Uncertain residue

Establish whether the material has cured before proceeding

Do not continue applying solvent in an attempt to dissolve fully cured polyurethane.

Where mechanical removal is required, work carefully around the underlying material to minimise surface damage.

Trigger-Tool Foam Adds the Applicator to the Cleanup Routine

Reusable dispensing equipment remains part of the job after the foam can is removed.

FoamFlo FT750 is a one-component polyurethane foam designed for trigger-tool delivery.

For applicable FoamFlo dispensing-tool cleaning, the process includes:

► Keeping the relevant can upright during removal
► Removing the foam can from the tool
► Applying FoamFlo Cleaner to remaining fresh foam around the can & tool connector
► Connecting the cleaner to the dispensing tool
► Dispensing cleaning fluid through the tool until the foam is cleared

Follow the applicable product, equipment & safety instructions throughout cleaning.

Completing the process while the polyurethane remains uncured makes residue easier to address.

Inspect the Applicator Before Storage

Fresh foam left inside or around dispensing equipment can become a much harder problem by the next job.

Check the compatible tool before putting it away.

Inspect:

► Tool connector
► Can connection
► Dispensing path
► Nose or outlet area
► Visible fresh foam
► Other locations identified in the equipment instructions

Where cleaning is required, complete it before residue hardens.

A clean applicator is also easier to inspect when preparing for its next use.

Manual Straw Foam & Tool-Delivery Foam Finish Differently

The delivery method influences what needs attention once application is complete.

FoamFlo F750 uses a manual straw delivery system while FoamFlo FT750 uses a compatible trigger-tool delivery system.

Before starting, identify:

► Foam product
► Delivery method
► Whether reusable equipment is involved
► Cleaner required
► Protective equipment
► Cleanup procedure

Knowing the setup beforehand helps ensure the right cleaning equipment is already within reach when the work finishes.

Protect Finished Surfaces Before Foam Is Applied

Preventing unwanted contact is preferable to cleaning polyurethane from finished work afterwards.

Consider protecting nearby:

► Painted surfaces
► Flooring
► Frames
► Finished joinery
► Visible metalwork
► Completed fixtures
► Equipment

Suitable protection around the application area can reduce accidental contact with fresh foam.

Cleaner supports good application practice but does not replace controlled dispensing & sensible surface protection.

Deal With Fresh Overspill Promptly

A quick inspection after dispensing can identify unwanted material while it remains manageable.

Look around:

► Openings
► Penetrations
► Frame edges
► Tool connections
► Adjacent surfaces
► Application equipment

Where FoamFlo Cleaner is appropriate, use it according to the applicable instructions while the polyurethane remains uncured.

Avoid spreading fresh foam across a larger area during removal.

Controlled cleanup helps keep a small overspill from becoming a wider finishing problem.

Use Care Around Finished Materials

An acetone-based cleaner should not automatically be assumed suitable for every decorative finish or building material.

Before cleaner contacts an exposed surface, consider:

► Paint
► Coatings
► Plastics
► Laminates
► Sealants
► Finished components
► Other solvent-sensitive materials

Follow the applicable product & safety information.

Where material compatibility is uncertain, do not treat FoamFlo Cleaner as a universal surface solvent.

Penetration Work Can Include Separate Mechanical Fixings

Service openings often combine filling work with anchors, screws or other connections around the same area.

For suitable light-duty masonry requirements, browse  Anchors & Wall Plugs.

Where screws or anchors better suit the fixture, Screws & Anchors provides another fastening option.

Keep the role of expanding foam separate from the mechanical connection supporting the fixture or service.

Accurate Dispensing Reduces Cleanup

Better control at the applicator means less unwanted foam to deal with afterwards.

Before applying expanding foam:

► Assess the cavity
► Protect adjacent finishes
► Prepare the substrate as required
► Follow the foam instructions
► Control the output
► Allow for expansion
► Keep cleaner accessible for fresh residue

Apply the foam with the cavity & surrounding finish in mind.

For practical thinking around dependable tools & consumables, read A tool is not just a tool. It’s a promise..

Store Foam Products & Cleaner Together

Keeping related products together can prevent crews reaching the work area with foam but no suitable cleaner.

Where practical, organise:

► Expanding foam
► Compatible dispensing equipment
► FoamFlo Cleaner
► Required accessories
► Protective equipment
► Current product instructions

Keeping the setup together also makes low cleaner stock easier to notice before another job begins.

In busy vehicles or workshops, identify foam cleaner clearly so it is not confused with unrelated aerosols or solvents.

Handle Foam Cleaner With Appropriate Care

Routine cleanup still involves an acetone-based solvent that requires suitable handling.

Before using FoamFlo Cleaner:

► Read the current label & safety information
► Wear appropriate personal protective equipment
► Provide suitable ventilation
► Observe storage requirements
► Follow applicable site controls
► Keep away from ignition sources as directed

Avoid using solvent cleaner in unsuitable or poorly ventilated conditions.

Keep the relevant safety information available to the people handling the product.

Cured Foam Requires Mechanical Removal

Once polyurethane has fully hardened, the cleaner is no longer the specified removal method.

Before mechanically removing cured foam, consider:

► Surrounding surface
► Accessibility
► Quantity of cured material
► Underlying material
► Risk of scratching or gouging the substrate
► Appropriate removal method

Take particular care around visible finishes.

The aim is to remove unwanted cured material without causing avoidable damage underneath.

Clean Around the Connector Before Flushing

Visible fresh residue around the connection deserves attention before cleaning fluid moves through the dispensing tool.

After removing the applicable foam can, inspect the can & tool connector.

Use FoamFlo Cleaner on remaining fresh foam around the connection according to the applicable instructions then attach the cleaner to the compatible dispensing tool.

Dispense cleaning fluid through the equipment as directed until the remaining foam has been cleared.

This addresses residue around the connection as well as material within the applicable dispensing path.

Keep Foam Cleaner for Its Intended Purpose

FoamFlo Cleaner is specifically intended for uncured expanding polyurethane foam & compatible FoamFlo equipment.

Do not automatically use it for:

► General-purpose degreasing
► Chemical-anchor hole preparation
► Fully cured adhesive removal
► Every type of sealant
► Unverified painted surfaces
► Fully cured PU foam

Different residues & surfaces require different cleaning methods.

For broader information on fixing choices around construction work, read the Fastener Guide Bolts Screws Anchors.

Heavier Connections Need Their Own Fastening System

Foam can fill or seal around an opening while separate hardware carries the fixture or connection.

Where heavier threaded hardware is appropriate, Structural Fasteners & Bolts provides another fastening family to consider.

For broader hardware requirements elsewhere in the installation, Bolts & Fasteners provides additional mechanical fixing options.

Never rely on expanding foam where the installation requires a specified mechanical connection.

Finish the Job With a Short Equipment Check

A consistent pack-up routine can make the next foam application easier to prepare.

Inspect

Look for uncured foam around the applicator, connector & immediate work area.

Clean

Use FoamFlo Cleaner where appropriate while residue remains uncured.

Flush

Where a compatible FoamFlo dispensing tool requires cleaning, follow the specified flushing procedure.

Confirm

Check that applicable fresh residue has been cleared from the equipment.

Store

Return the cleaner, applicator & remaining consumables to suitable storage.

Completing these steps while the work is fresh is easier than discovering hardened residue when the equipment is next required.