► ICCONS® | Diameter Hose Clamps

Simplify Pipe Support Across Multiple Diameters Different pipe diameters shouldn't automatically mean carrying a separate clamp for every size on the project. ICCONS® Diameter Hose Clamps include CELO self-locking multi-diameter clamps designed to support compatible pipe & conduit across defined diameter ranges, giving plumbing, electrical, HVAC & building-services crews a...

Simplify Pipe Support Across Multiple Diameters

Different pipe diameters shouldn't automatically mean carrying a separate clamp for every size on the project. ICCONS® Diameter Hose Clamps include CELO self-locking multi-diameter clamps designed to support compatible pipe & conduit across defined diameter ranges, giving plumbing, electrical, HVAC & building-services crews a practical way to reduce clamp variations while maintaining organised service runs.

For installers moving between PEX, copper, PVC pipe & conduit, selection starts with actual outside diameter. The CELO Smart Nail Clamp – ABT family covers multiple pipe sizes within each nominated clamp range, while its self-locking design allows compatible pipe to be pushed into position without assembling a conventional metal clamp around every support point.

For surrounding installation requirements, browse Specialty Fasteners & Fixings, prepare for direct fixing with Power Tools or plan accurate service runs using Measuring & Leveling Tools.

What Are ICCONS® Diameter Hose Clamps?

Despite the collection name, these products serve a different purpose from conventional worm-drive hose clamps. The ICCONS® range includes CELO multi-diameter pipe clamps designed to support compatible pipes & conduits rather than compress flexible hose around a fitting.

The CELO Smart Nail Clamp – ABT is a self-locking polyamide clamp offered across four verified diameter bands:

► GTQC14-18 – 14–18 mm
► GTQC20-25 – 20–25 mm
► GTQC26-32 – 26–32 mm
► GTQC35-42 – 35–42 mm

This approach gives installers several practical advantages:

► Multi-diameter coverage – each clamp accommodates compatible pipes within its nominated diameter band
► Self-locking closure – the pipe is pushed into the clamp to close the support around it
► Polyamide construction – provides a purpose-designed support around compatible pipe
► Pipe movement accommodation – the clamp design can accommodate pipe dilatation
► Alignment assistance – useful when maintaining consistent service runs
► Direct installation options – the ABT system supports screw fixing & compatible gas-nailing installation methods
► Warm-water capability – ABT clamps are approved for warm-water pipe applications up to 90°C

A clamp range isn't permission to exceed its limits. GTQC20-25, for example, is intended for compatible outside diameters from 20 mm to 25 mm; once the pipe moves beyond that range, the next appropriate clamp should be selected.

Why Choose ICCONS® Diameter Hose Clamps?

Cover Several Pipe Sizes with Fewer Clamp References

Service contractors regularly encounter small changes in pipe diameter across the same project. Instead of assigning a different clamp to every individual dimension, CELO multi-diameter clamps group compatible sizes into practical bands.

That can simplify purchasing, vehicle stock, site consumables & replenishment for crews working across recurring pipe-support installations.

Close the Clamp by Positioning the Pipe

Every additional component handled at each support point becomes significant across a long installation. The self-locking ABT design allows compatible pipe to be pushed into the clamp, closing the support around it.

For repeated plumbing, electrical or mechanical service runs, that provides a straightforward alternative to assembling a multi-piece clamp at every location.

Accommodate Thermal Pipe Movement

Warm pipework changes dimension as operating temperature changes. CELO's polyamide clamp design embraces the pipe while allowing for pipe dilatation, making the ABT family relevant to compatible warm-water installations.

The ABT family is approved for warm-water pipe applications up to 90°C. Pipe compatibility, support spacing & project requirements still need to be followed.

Keep Parallel Services More Orderly

Plant rooms & service corridors quickly become difficult to manage when supports aren't planned consistently. Diameter-specific clamp selection combined with accurate positioning can help keep compatible pipe & conduit runs aligned across walls, ceilings & building-service zones.

This becomes particularly valuable where plumbing, electrical & mechanical services occupy the same installation area.

Select Around Both Pipe & Fixing Method

Knowing the pipe diameter solves only half the selection problem. Installers also need to establish how the clamp will connect to the supporting structure.

Within CELO's broader clamping systems, different products support direct fixing, screw installation or strut-mounted arrangements. The correct family therefore depends on both the service being supported & the installation method.

Common Applications

Hot & Cold PEX Pipework

A plumbing rough-in may contain several PEX sizes before a single wall is closed. CELO Quick Clip self-locking pipe clamps can support compatible hot & cold PEX pipework while multi-diameter ranges help reduce the number of clamp references needed across the installation.

For warm-water services, remain within the nominated temperature capability of the selected system.

Copper Water Services

Copper pipe requires support without turning every change in outside diameter into a stock-management problem. Compatible CELO Quick Clip systems can be used with copper pipe, allowing plumbers to select the appropriate clamp range around the measured outside diameter.

Measure the pipe rather than assuming its outside diameter from the nominal description alone.

PVC Pipe Runs

Long PVC installations depend on consistent support positioning as much as the individual clamp. Compatible self-locking clamps can provide repeatable pipe retention across applicable PVC service runs.

Establish the route & support positions before fixing the clamps so the finished pipework follows the intended line.

Electrical Conduit

Pipe support isn't limited to water services. CELO develops clamping systems for compatible electrical conduit as well as plumbing applications, making diameter-based clamp selection relevant to electricians installing repeated conduit runs.

For associated electrical & construction fixing requirements, Screws & Anchors provides another route into supporting installation hardware.

Air-Conditioning & Refrigeration Installations

Mechanical services frequently need to share limited wall & ceiling space with other trades. Compatible pipe-clamping systems can help air-conditioning & refrigeration installers maintain planned service routes where pipe diameter, support arrangement & installation conditions suit the selected clamp.

Clear set-out becomes especially important where several services run in parallel.

Commercial Building Services

Hospitals, commercial facilities, plant areas & service corridors can contain substantial quantities of supported pipework. Multi-diameter clamps can reduce unnecessary component variation while giving installers defined diameter bands for compatible services.

This is particularly useful where purchasing teams need repeatable product references for ongoing projects & maintenance.

Retrofit & Maintenance Work

Existing buildings rarely present every service in one convenient pipe size. Maintenance teams working across mixed pipework can benefit from clamp ranges capable of accommodating several compatible diameters.

Confirm the existing pipe material, outside diameter, support surface & fixing method before selecting replacement hardware.

Product Selection Guide

Start with a measurement, not an assumption. Confirm the outside diameter of the pipe or conduit, then select the ABT clamp whose nominated range contains that dimension.

ICCONS® Part Number

Diameter Range

Product Family

Practical Selection Point

GTQC14-18

14–18 mm

CELO Smart Nail Clamp – ABT

Small-diameter pipe & conduit

GTQC20-25

20–25 mm

CELO Smart Nail Clamp – ABT

Common mid-range services

GTQC26-32

26–32 mm

CELO Smart Nail Clamp – ABT

Larger pipe & conduit

GTQC35-42

35–42 mm

CELO Smart Nail Clamp – ABT

Largest verified ABT diameter band

GTQC14-18 – 14 to 18 mm

Smaller services need a clamp capable of closing correctly around their outside diameter. GTQC14-18 covers compatible pipes from 14 mm through to 18 mm.

It is the smallest verified diameter band in the ABT family.

GTQC20-25 – 20 to 25 mm

Several nearby pipe sizes can be covered without changing clamp reference. GTQC20-25 accommodates compatible outside diameters from 20 mm through to 25 mm.

This makes it a useful step where crews regularly encounter pipework across that mid-range band.

GTQC26-32 – 26 to 32 mm

Once pipe diameter moves above 25 mm, selection moves into the next ABT range. GTQC26-32 supports compatible pipes from 26 mm through to 32 mm.

Don't force a 32 mm service into the smaller 20–25 mm clamp simply because both belong to the same product family.

GTQC35-42 – 35 to 42 mm

Larger compatible services are covered by the upper verified ABT range. GTQC35-42 accommodates outside diameters from 35 mm through to 42 mm.

Where the service exceeds 42 mm, use a clamp system specifically nominated for the larger diameter.

ABT, STC or SSC – What Changes?

The supporting structure determines which clamping approach belongs on the material list. CELO provides additional clamp systems for applications where the installation method differs from ABT.

CELO Clamp System

Installation Approach

Verified Range Coverage

Typical Decision Point

Smart Nail Clamp – ABT

Direct fixing with compatible screw or gas-nailing method

14–42 mm

Direct pipe & conduit support

Smart Tap Clamp – STC

Mechanical screw fixing

14–32 mm

Screw-fixed service support

Smart Strut Clamp – SSC

Direct connection into compatible strut

14–65 mm

Strut-mounted building services

These alternatives broaden the installation system rather than replacing ABT purely because a different diameter appears. Establish the support structure first, then select the compatible clamp family & diameter.

For specialised installation hardware around different support arrangements, browse Bolts & Fasteners.

Expert Tips

Measure the Outside Diameter

The clamp contacts the outside of the pipe, not the nominal description printed on the plans. Confirm the actual outside diameter before ordering, especially when different pipe materials appear across the same project.

A quick measurement can prevent an entire box of incorrectly sized clamps reaching the work area.

Identify the Support Surface Before Choosing the System

Concrete, masonry & strut-supported services don't automatically use the same attachment method. Determine what sits behind the clamp before finalising the fixing arrangement.

Where drilling into concrete or masonry forms part of the installation, Concrete Cutting & Drilling Tools provide equipment for preparing suitable fixing points.

Set Out Parallel Runs as a Group

Four straight services installed together look organised; four individually straight services can still look misaligned against one another. Establish common reference lines where multiple pipe or conduit runs share the same wall or service zone.

This helps maintain consistent spacing between supports & adjoining services.

Keep Diameter Bands Visually Separated

A service vehicle isn't the place to discover that three similar-looking clamp sizes have been mixed into one bin. Store GTQC14-18, GTQC20-25, GTQC26-32 & GTQC35-42 separately with part numbers visible.

Clear identification speeds replenishment & reduces trial fitting on site.

Don't Confuse Pipe Support with Hose Sealing

A supported pipe & a sealed hose connection require different clamp functions. CELO self-locking clamps retain compatible pipes & conduits; they aren't conventional worm-drive hose clamps used to compress flexible hose around a spigot or fitting.

Confirm whether the job requires support or joint compression before selecting hardware.

Treat Warm-Water Approval as Product-Specific

Temperature capability shouldn't be transferred from one clamp family to every other clamp that looks similar. The verified warm-water approval up to 90°C applies to the CELO Smart Nail Clamp – ABT family discussed here.

Check the applicable product information when moving to a different clamping system.

Coordinate Direct Fixing with Site Conditions

Fast installation still depends on the substrate, fixing equipment & work environment being appropriate. Where compatible gas nailing forms part of the installation method, follow the applicable tool instructions, fixing requirements & site procedures.

For crews working around active drilling & fixing operations, Protective Equipment For Concrete Work provides another practical site-preparation pathway.

For broader insight into organising equipment before busy project periods, read Spring Jobsite Prep Getting Your Gear Ready.

Why Buy ICCONS® Diameter Hose Clamps From Industrial Shed?

Clamp selection becomes easier to manage when purchasing teams can order around defined diameter bands. GTQC14-18, GTQC20-25, GTQC26-32 & GTQC35-42 give crews identifiable references for recurring pipe-support requirements rather than relying on loosely described clamp sizes.

Industrial Shed also supplies the equipment & fixings used around professional building-services installations. That allows contractors to coordinate clamp requirements with drilling, direct fixing, measurement & site equipment as part of the same procurement process.

For contractors managing repeat site requirements, on-site & workshop Services provides support around ongoing workshop & jobsite needs.

For product or application questions before ordering, connect with the Industrial Shed Team.

For contractors weighing equipment choices across workshop & service work, read Air Tools vs Electric: The Real Cost of Ownership for Australian Workshops.

For another practical perspective on purchasing equipment for professional trade use, see The Hidden Cost of 'I Can Get It Cheaper Online.

Consolidate Pipe Support Across Multiple Diameters

The benefit of a multi-diameter clamp is straightforward: fewer clamp references can cover more of the compatible pipe sizes encountered across the project. CELO Smart Nail Clamp – ABT configurations give plumbing, electrical, HVAC & building-services crews four defined diameter bands from 14 mm through to 42 mm.

Measure the service, confirm the support method & select the range that fits the actual installation. That approach keeps pipe support consistent while making purchasing, storage & site replenishment easier to control.

Specify ICCONS® Diameter Hose Clamps by actual pipe diameter & support method for a cleaner, more manageable approach to multi-size pipe & conduit installations.

Frequently Asked Questions

Which ICCONS® clamp covers a 22 mm outside diameter?

GTQC20-25 covers compatible outside diameters from 20 mm through to 25 mm, placing a measured 22 mm service within that nominated range.

Can one ABT clamp accommodate more than one pipe diameter?

Yes. Each ABT reference covers a defined diameter band rather than one exact pipe size. Always keep the installed pipe within the stated range.

Are these the same as stainless worm-drive hose clamps?

No. The CELO products discussed here are self-locking pipe & conduit support clamps. A worm-drive hose clamp performs a different job by compressing flexible hose around a connection.

Can ICCONS® ABT clamps be used with PEX pipe?

Yes. ICCONS® identifies Quick Clip self-locking pipe clamps for hot & cold PEX pipe applications, subject to compatible sizing & installation requirements.

Which ABT clamp covers a 40 mm pipe?

GTQC35-42 covers compatible outside diameters from 35 mm through to 42 mm.

What if the pipe needs to be supported from strut?

A strut-mounted installation can call for the CELO Smart Strut Clamp – SSC rather than selecting ABT solely by diameter. The SSC family is designed around compatible strut installation.

Brands

► ICCONS® | Diameter Hose Clamps

Simplify Pipe Support Across Multiple Diameters

Different pipe diameters shouldn't automatically mean carrying a separate clamp for every size on the project. ICCONS® Diameter Hose Clamps include CELO self-locking multi-diameter clamps designed to support compatible pipe & conduit across defined diameter ranges, giving plumbing, electrical, HVAC & building-services crews a practical way to reduce clamp variations while maintaining organised service runs.

For installers moving between PEX, copper, PVC pipe & conduit, selection starts with actual outside diameter. The CELO Smart Nail Clamp – ABT family covers multiple pipe sizes within each nominated clamp range, while its self-locking design allows compatible pipe to be pushed into position without assembling a conventional metal clamp around every support point.

For surrounding installation requirements, browse Specialty Fasteners & Fixings, prepare for direct fixing with Power Tools or plan accurate service runs using Measuring & Leveling Tools.

What Are ICCONS® Diameter Hose Clamps?

Despite the collection name, these products serve a different purpose from conventional worm-drive hose clamps. The ICCONS® range includes CELO multi-diameter pipe clamps designed to support compatible pipes & conduits rather than compress flexible hose around a fitting.

The CELO Smart Nail Clamp – ABT is a self-locking polyamide clamp offered across four verified diameter bands:

► GTQC14-18 – 14–18 mm
► GTQC20-25 – 20–25 mm
► GTQC26-32 – 26–32 mm
► GTQC35-42 – 35–42 mm

This approach gives installers several practical advantages:

► Multi-diameter coverage – each clamp accommodates compatible pipes within its nominated diameter band
► Self-locking closure – the pipe is pushed into the clamp to close the support around it
► Polyamide construction – provides a purpose-designed support around compatible pipe
► Pipe movement accommodation – the clamp design can accommodate pipe dilatation
► Alignment assistance – useful when maintaining consistent service runs
► Direct installation options – the ABT system supports screw fixing & compatible gas-nailing installation methods
► Warm-water capability – ABT clamps are approved for warm-water pipe applications up to 90°C

A clamp range isn't permission to exceed its limits. GTQC20-25, for example, is intended for compatible outside diameters from 20 mm to 25 mm; once the pipe moves beyond that range, the next appropriate clamp should be selected.

Why Choose ICCONS® Diameter Hose Clamps?

Cover Several Pipe Sizes with Fewer Clamp References

Service contractors regularly encounter small changes in pipe diameter across the same project. Instead of assigning a different clamp to every individual dimension, CELO multi-diameter clamps group compatible sizes into practical bands.

That can simplify purchasing, vehicle stock, site consumables & replenishment for crews working across recurring pipe-support installations.

Close the Clamp by Positioning the Pipe

Every additional component handled at each support point becomes significant across a long installation. The self-locking ABT design allows compatible pipe to be pushed into the clamp, closing the support around it.

For repeated plumbing, electrical or mechanical service runs, that provides a straightforward alternative to assembling a multi-piece clamp at every location.

Accommodate Thermal Pipe Movement

Warm pipework changes dimension as operating temperature changes. CELO's polyamide clamp design embraces the pipe while allowing for pipe dilatation, making the ABT family relevant to compatible warm-water installations.

The ABT family is approved for warm-water pipe applications up to 90°C. Pipe compatibility, support spacing & project requirements still need to be followed.

Keep Parallel Services More Orderly

Plant rooms & service corridors quickly become difficult to manage when supports aren't planned consistently. Diameter-specific clamp selection combined with accurate positioning can help keep compatible pipe & conduit runs aligned across walls, ceilings & building-service zones.

This becomes particularly valuable where plumbing, electrical & mechanical services occupy the same installation area.

Select Around Both Pipe & Fixing Method

Knowing the pipe diameter solves only half the selection problem. Installers also need to establish how the clamp will connect to the supporting structure.

Within CELO's broader clamping systems, different products support direct fixing, screw installation or strut-mounted arrangements. The correct family therefore depends on both the service being supported & the installation method.

Common Applications

Hot & Cold PEX Pipework

A plumbing rough-in may contain several PEX sizes before a single wall is closed. CELO Quick Clip self-locking pipe clamps can support compatible hot & cold PEX pipework while multi-diameter ranges help reduce the number of clamp references needed across the installation.

For warm-water services, remain within the nominated temperature capability of the selected system.

Copper Water Services

Copper pipe requires support without turning every change in outside diameter into a stock-management problem. Compatible CELO Quick Clip systems can be used with copper pipe, allowing plumbers to select the appropriate clamp range around the measured outside diameter.

Measure the pipe rather than assuming its outside diameter from the nominal description alone.

PVC Pipe Runs

Long PVC installations depend on consistent support positioning as much as the individual clamp. Compatible self-locking clamps can provide repeatable pipe retention across applicable PVC service runs.

Establish the route & support positions before fixing the clamps so the finished pipework follows the intended line.

Electrical Conduit

Pipe support isn't limited to water services. CELO develops clamping systems for compatible electrical conduit as well as plumbing applications, making diameter-based clamp selection relevant to electricians installing repeated conduit runs.

For associated electrical & construction fixing requirements, Screws & Anchors provides another route into supporting installation hardware.

Air-Conditioning & Refrigeration Installations

Mechanical services frequently need to share limited wall & ceiling space with other trades. Compatible pipe-clamping systems can help air-conditioning & refrigeration installers maintain planned service routes where pipe diameter, support arrangement & installation conditions suit the selected clamp.

Clear set-out becomes especially important where several services run in parallel.

Commercial Building Services

Hospitals, commercial facilities, plant areas & service corridors can contain substantial quantities of supported pipework. Multi-diameter clamps can reduce unnecessary component variation while giving installers defined diameter bands for compatible services.

This is particularly useful where purchasing teams need repeatable product references for ongoing projects & maintenance.

Retrofit & Maintenance Work

Existing buildings rarely present every service in one convenient pipe size. Maintenance teams working across mixed pipework can benefit from clamp ranges capable of accommodating several compatible diameters.

Confirm the existing pipe material, outside diameter, support surface & fixing method before selecting replacement hardware.

Product Selection Guide

Start with a measurement, not an assumption. Confirm the outside diameter of the pipe or conduit, then select the ABT clamp whose nominated range contains that dimension.

ICCONS® Part Number

Diameter Range

Product Family

Practical Selection Point

GTQC14-18

14–18 mm

CELO Smart Nail Clamp – ABT

Small-diameter pipe & conduit

GTQC20-25

20–25 mm

CELO Smart Nail Clamp – ABT

Common mid-range services

GTQC26-32

26–32 mm

CELO Smart Nail Clamp – ABT

Larger pipe & conduit

GTQC35-42

35–42 mm

CELO Smart Nail Clamp – ABT

Largest verified ABT diameter band

GTQC14-18 – 14 to 18 mm

Smaller services need a clamp capable of closing correctly around their outside diameter. GTQC14-18 covers compatible pipes from 14 mm through to 18 mm.

It is the smallest verified diameter band in the ABT family.

GTQC20-25 – 20 to 25 mm

Several nearby pipe sizes can be covered without changing clamp reference. GTQC20-25 accommodates compatible outside diameters from 20 mm through to 25 mm.

This makes it a useful step where crews regularly encounter pipework across that mid-range band.

GTQC26-32 – 26 to 32 mm

Once pipe diameter moves above 25 mm, selection moves into the next ABT range. GTQC26-32 supports compatible pipes from 26 mm through to 32 mm.

Don't force a 32 mm service into the smaller 20–25 mm clamp simply because both belong to the same product family.

GTQC35-42 – 35 to 42 mm

Larger compatible services are covered by the upper verified ABT range. GTQC35-42 accommodates outside diameters from 35 mm through to 42 mm.

Where the service exceeds 42 mm, use a clamp system specifically nominated for the larger diameter.

ABT, STC or SSC – What Changes?

The supporting structure determines which clamping approach belongs on the material list. CELO provides additional clamp systems for applications where the installation method differs from ABT.

CELO Clamp System

Installation Approach

Verified Range Coverage

Typical Decision Point

Smart Nail Clamp – ABT

Direct fixing with compatible screw or gas-nailing method

14–42 mm

Direct pipe & conduit support

Smart Tap Clamp – STC

Mechanical screw fixing

14–32 mm

Screw-fixed service support

Smart Strut Clamp – SSC

Direct connection into compatible strut

14–65 mm

Strut-mounted building services

These alternatives broaden the installation system rather than replacing ABT purely because a different diameter appears. Establish the support structure first, then select the compatible clamp family & diameter.

For specialised installation hardware around different support arrangements, browse Bolts & Fasteners.

Expert Tips

Measure the Outside Diameter

The clamp contacts the outside of the pipe, not the nominal description printed on the plans. Confirm the actual outside diameter before ordering, especially when different pipe materials appear across the same project.

A quick measurement can prevent an entire box of incorrectly sized clamps reaching the work area.

Identify the Support Surface Before Choosing the System

Concrete, masonry & strut-supported services don't automatically use the same attachment method. Determine what sits behind the clamp before finalising the fixing arrangement.

Where drilling into concrete or masonry forms part of the installation, Concrete Cutting & Drilling Tools provide equipment for preparing suitable fixing points.

Set Out Parallel Runs as a Group

Four straight services installed together look organised; four individually straight services can still look misaligned against one another. Establish common reference lines where multiple pipe or conduit runs share the same wall or service zone.

This helps maintain consistent spacing between supports & adjoining services.

Keep Diameter Bands Visually Separated

A service vehicle isn't the place to discover that three similar-looking clamp sizes have been mixed into one bin. Store GTQC14-18, GTQC20-25, GTQC26-32 & GTQC35-42 separately with part numbers visible.

Clear identification speeds replenishment & reduces trial fitting on site.

Don't Confuse Pipe Support with Hose Sealing

A supported pipe & a sealed hose connection require different clamp functions. CELO self-locking clamps retain compatible pipes & conduits; they aren't conventional worm-drive hose clamps used to compress flexible hose around a spigot or fitting.

Confirm whether the job requires support or joint compression before selecting hardware.

Treat Warm-Water Approval as Product-Specific

Temperature capability shouldn't be transferred from one clamp family to every other clamp that looks similar. The verified warm-water approval up to 90°C applies to the CELO Smart Nail Clamp – ABT family discussed here.

Check the applicable product information when moving to a different clamping system.

Coordinate Direct Fixing with Site Conditions

Fast installation still depends on the substrate, fixing equipment & work environment being appropriate. Where compatible gas nailing forms part of the installation method, follow the applicable tool instructions, fixing requirements & site procedures.

For crews working around active drilling & fixing operations, Protective Equipment For Concrete Work provides another practical site-preparation pathway.

For broader insight into organising equipment before busy project periods, read Spring Jobsite Prep Getting Your Gear Ready.