Fast, Secure Conduit & Pipe Fixing to Masonry
Need a faster way to secure conduit, pipe or cable along concrete & masonry surfaces? ICCONS® | Conduit Saddles provide size-specific HDPE & metal fixing options for compatible conduit, corrugated pipe, cables, PVC pipe & sanitary installations across concrete, stone, concrete block & solid brick.
Long service runs become easier to manage when the support is matched to both the service diameter & installation system. ICCONS® conduit saddles are designed for use with compatible gas fastening equipment, helping electricians, plumbers, HVAC installers, fit-out contractors & maintenance crews establish organised service routes with fewer loose components at each fixing point.
For related installation requirements, explore Specialty Fasteners & Fixings, Screws & Anchors & Power Tools.
What Are ICCONS® Conduit Saddles?
ICCONS® Conduit Saddles are single-clamp fittings designed to retain compatible conduit, pipe or cable against suitable masonry base materials. The range includes HDPE saddles for common service diameters together with a 25 mm metal saddle, giving installers a straightforward choice based on size, material & project requirements.
Available configurations include:
► GTPVC16 – 16 mm PVC Single Conduit Saddle (FP16)
► GTPVC20 – 20 mm PVC Single Conduit Saddle (FP20)
► GTPVC25 – 25 mm PVC Single Conduit Saddle (FP25)
► GTMT25 – 25 mm Metal Single Conduit Saddle (FT-25), fire rated
What separates the four options is more than part number alone. The HDPE range provides dedicated 16 mm, 20 mm & 25 mm configurations, while GTMT25 provides a metal 25 mm alternative with a fire-rated approval.
For practical guidance on choosing fastening hardware around different materials & connections, read the Fastener Guide Bolts Screws Anchors.
Why Choose ICCONS® Conduit Saddles?
Speed Up Repetitive Service Fixing
Picture a commercial installation with conduit supports repeating along walls, slabs & service routes. Using a saddle designed for compatible gas-tool installation can reduce the number of separate components handled at each fixing position.
For electricians, plumbers & mechanical contractors working through larger installations, that simpler fixing arrangement can make repetitive support work more efficient.
Match the Support to the Service Diameter
A 16 mm conduit shouldn't rely on a saddle selected for a substantially different service size. ICCONS® provides dedicated 16 mm, 20 mm & 25 mm HDPE saddles so installers can choose around the diameter being retained.
Correct sizing also helps maintain a consistent support arrangement as the service continues through multiple fixing positions.
Choose Between HDPE & Metal
Two 25 mm services can still have different support requirements. GTPVC25 provides the HDPE configuration, while GTMT25 provides the metal alternative with a fire-rated approval.
Where fire performance forms part of the project documentation, confirm the specified saddle & complete installation requirements before work begins.
Install Across Common Masonry Materials
Service routes often move between different masonry surfaces within the same project. ICCONS® identifies the conduit saddles for suitable applications involving concrete, stone, concrete block & solid brick.
Assess the receiving material before installation rather than assuming every masonry surface will respond identically to direct fastening.
Integrate with Compatible Gas Fastening Equipment
A conduit saddle can't be considered separately from the equipment installing it. ICCONS® identifies the range for use with GT-3 & GT-6 gas tools, together with the appropriate pins & gas-tool consumables.
Check the saddle, service size, tool, fastening consumables & receiving material as a complete installation setup.
Common Applications
Electrical Conduit Runs
Straight conduit is easier to install when the support positions are established before the first saddle is fixed. ICCONS® conduit saddles provide dedicated fixing points for compatible electrical conduit running across suitable masonry surfaces.
Measuring & Leveling Tools can assist with establishing consistent service lines, heights & fixing positions before repetitive installation begins.
Corrugated Pipe Installation
Flexible corrugated pipe still requires controlled support along the installation route. ICCONS® specifically identifies corrugated pipe among the suitable applications for its conduit saddles.
Match the saddle to the service size & follow the support requirements applicable to the installation.
PVC Pipe Fixing
Purpose-designed support provides a more controlled solution than adapting unrelated fastening components around a service. Compatible PVC pipe can be retained with an appropriate ICCONS® conduit saddle where the diameter, receiving material & fixing arrangement suit the application.
Confirm service sizes during take-off so the required saddle quantities can be separated before installation.
Cable Retention
Some cable routes need direct support against masonry rather than an unsupported run between distant fixing points. ICCONS® includes cables among the applications for its conduit saddle range.
Where the installation requires a dedicated cable-management fixing instead, use the support designed specifically for that service.
Sanitary Installations
Pipe support becomes particularly important where sanitary services follow long routes across solid building surfaces. ICCONS® identifies sanitary installations among the applications for these saddles.
Establish the service route, saddle size & support positions before repetitive fastening begins.
Concrete, Blockwork, Stone & Solid Brick
One building can present several different masonry materials before a service reaches its final termination point. ICCONS® identifies concrete, stone, concrete block & solid brick as suitable base materials for the conduit saddle range when used with the appropriate installation system.
Inspect the actual receiving material at each relevant section of the run before direct fastening.
For crews preparing equipment & consumables ahead of larger installation programs, Spring Jobsite Prep Getting Your Gear Ready provides additional practical preparation guidance.
Product Selection Guide
Start with the service diameter because it immediately narrows the saddle choice. From there, consider whether HDPE or metal is required, confirm the receiving material & check that the intended gas-tool installation system is appropriate.
|
Part Number
|
Saddle Type
|
Service Size
|
Material
|
Key Consideration
|
|
GTPVC16
|
FP16 Single Conduit Saddle
|
16 mm
|
HDPE
|
For compatible 16 mm services
|
|
GTPVC20
|
FP20 Single Conduit Saddle
|
20 mm
|
HDPE
|
For compatible 20 mm services
|
|
GTPVC25
|
FP25 Single Conduit Saddle
|
25 mm
|
HDPE
|
HDPE option for compatible 25 mm services
|
|
GTMT25
|
FT-25 Single Conduit Saddle
|
25 mm
|
Metal
|
Fire-rated metal option
|
16 mm, 20 mm or 25 mm?
Several conduit diameters on one project can make selection by appearance unreliable. Confirm the service diameter & use GTPVC16, GTPVC20 or GTPVC25 for the corresponding HDPE configuration.
At 25 mm, determine whether the HDPE GTPVC25 or metal GTMT25 saddle is required for the installation.
HDPE or Metal?
Material choice should follow the application rather than personal preference. The HDPE saddles provide options for compatible general service installations, while GTMT25 provides the specific 25 mm metal configuration identified with fire-rated approval.
Don't assume the fire-rated designation of GTMT25 applies to the HDPE products within the same collection.
What Temperature Range Applies to the HDPE Saddles?
Temperature exposure can become important when services pass through demanding areas. ICCONS® specifies its HDPE conduit saddle product with temperature resistance from -20°C to +100°C.
The complete service installation should still be checked against environmental conditions & project requirements.
Which Gas Tools Suit the Saddles?
Correct sizing won't compensate for incompatible installation equipment. ICCONS® identifies its conduit saddles as suitable for use with GT-3 & GT-6 gas tools.
The appropriate pins & fuel also form part of the installation system, so confirm all components before work begins.
What If Direct Fastening Isn't Appropriate?
Some masonry conditions or project requirements call for a conventional drilled fixing instead. Where direct fastening isn't suitable, a correctly selected anchor, plug or screw arrangement may provide the required alternative.
Explore Anchors & Wall Plugs for related masonry fixing options.
Expert Tips
Measure Before Ordering
Checking the service diameter during take-off is far easier than discovering the wrong saddle size after installation has started. Separate 16 mm, 20 mm & 25 mm quantities before ordering so each work area receives the correct configuration.
Lay Out the Service Route First
Good support spacing starts with knowing exactly where the conduit or pipe is going. Mark the route, changes in direction & planned support positions before repetitive fastening begins.
For longer commercial service routes, Surveying & Layout Tools can assist with accurate positioning across larger work areas.
Keep Fire-Rated Requirements Specific
Fire-rated work requires careful attention to the exact component being specified. ICCONS® identifies GTMT25, the 25 mm Metal Single Conduit Saddle, with fire-rated approval.
GTPVC16, GTPVC20 & GTPVC25 shouldn't be assumed to carry the same designation.
Check the Base Material at the Fixing Point
Concrete, concrete block, stone & solid brick can present different fastening conditions. Identify the receiving material before using the gas-tool system & follow the current installation requirements for the applicable equipment.
Where direct fastening isn't appropriate, move to a fixing method suited to the substrate.
Support the Service Without Forcing the Saddle
An incorrectly sized saddle shouldn't be made to fit by excessive compression or distortion. Match the support to the service diameter so the conduit, pipe or cable is retained appropriately.
Organise Different Sizes Before Installation
Mixed saddle sizes can waste time when installers have to identify each component during the fixing run. Keep 16 mm, 20 mm & 25 mm configurations separated with their part numbers visible.
Small Parts Organisers can help keep related conventional fasteners & smaller installation components organised around the work area.
Consider the Complete Installation System
Reliable service support depends on more than the saddle itself. Check the service diameter, saddle, gas tool, pins, fuel & receiving material together before repetitive installation begins.
For additional practical guidance on considering the complete fastening arrangement, read Why Good Fasteners Matter More Than the Tool You Drive Them With.