Equip Chemical Anchor Installations From Drilling to Injection
The adhesive cartridge is only one component of a chemical anchoring installation. ICCONS® | Adhesives & Accessories cover the supporting equipment used to clean drilled holes, mix resin correctly, reach deeper embedments & control adhesive placement in compatible concrete & masonry applications.
For concreters, structural installers, builders & civil contractors, the required setup depends on the substrate, chemical anchor, hole dimensions & anchor element. Compare Anchor Bolts for adjoining anchoring requirements, prepare concrete with Concrete Cutting & Drilling Tools or organise the drilling stage through Drill Accessories.
Depending on the ICCONS system, installation equipment can include:
► Mixer nozzles
► Adhesive nozzle extensions
► Blow pumps
► Standard wire brushes
► Performance wire brushes
► Brush extensions
► SDS Plus brush adaptors
► Piston plugs
► Plastic sleeves
► Mesh sleeves
► Adhesive filler washers
What Are ICCONS® Adhesives & Accessories?
Each accessory handles a particular part of getting chemical adhesive from the cartridge into a correctly prepared connection.
Rather than performing one common task, the range covers several stages:
|
Stage
|
Relevant Equipment
|
|
Hole preparation
|
Blow pumps & wire brushes
|
|
Deeper cleaning
|
Brush extensions & compatible adaptors
|
|
Resin mixing
|
System-matched mixer nozzles
|
|
Extended injection
|
Nozzle extensions
|
|
Deep or overhead placement
|
Applicable piston plugs
|
|
Hollow masonry
|
Plastic or mesh sleeves
|
|
Selected fixing arrangements
|
Adhesive filler washers
|
The equipment required for one adhesive system should not automatically be carried across to another.
Start With the Installation Rather Than the Accessory
A useful equipment list comes from the fixing specification, not from filling a toolbox with every available component.
Before ordering, establish:
► Base material
► Chemical adhesive
► Cartridge size & format
► Anchor element
► Drill-hole diameter
► Embedment depth
► Required cleaning procedure
► Injection method
► Mixer-nozzle specification
► Sleeve requirement where applicable
Once those details are known, the supporting components become much easier to identify.
Mixer Nozzles Must Suit the Chemical Adhesive
Correct resin mixing happens before the material reaches the anchor hole.
ICCONS provides dedicated mixer nozzles for its Chemselect injection systems, including configurations for BIS-PE Gen3, BIS-E, BIS-HY Gen2, BIS-V & BIS-P Gen2.
Compatibility matters because different adhesive systems use their specified mixing arrangement.
Before opening a cartridge, check:
► Adhesive product
► Cartridge format
► Correct mixer nozzle
► Applicator compatibility
► Any required nozzle extension
Do not substitute a nozzle simply because it appears to connect to the cartridge.
For broader information on how fixing components work together, read Why Good Fasteners Matter More Than the Tool You Drive Them With.
Hole Cleaning Happens Before Resin Injection
Drilling leaves material inside the bore that may need to be removed through a defined cleaning sequence.
ICCONS provides blow pumps, standard wire brushes, performance wire brushes & related extensions for applicable anchor installations.
Depending on the chemical anchor, preparation can involve:
► Blowing loose material from the hole
► Brushing the bore wall
► Repeating prescribed cleaning stages
► Reaching the complete embedment depth
► Using the brush family specified for the adhesive system
Follow the instructions for the exact chemical anchor being installed.
A familiar cleaning routine from another product is not a substitute for the procedure belonging to the current system.
Brush Selection Begins With the Drilled Hole
Threaded rod size, reinforcing-bar diameter & drill-hole diameter are related measurements but they are not necessarily identical.
When brushing is specified, establish the actual bore dimension before choosing the accessory.
Check:
► Drill-bit diameter
► Required hole depth
► Brush diameter
► Standard or performance brush family
► Extension requirements
► Applicable cleaning sequence
ICCONS supplies brush options across different diameters together with accessories for deeper preparation.
Where structural threaded hardware forms part of the finished connection, browse Structural Fasteners & Bolts.
Greater Embedment Depth Requires Greater Reach
A correctly sized brush cannot prepare the full bore if its working length stops short of the specified embedment.
ICCONS brush extensions provide additional reach for applicable deeper holes.
Review:
► Total hole depth
► Brush length
► Extension compatibility
► Adaptor requirements
► Access around the fixing position
Deep embedments deserve particular attention because conditions at the bottom of the hole cannot be judged from the entrance.
The cleaning equipment needs to reach the depth called for by the installation.
SDS Plus Adaptors Can Change How the Brush Is Driven
Repeated hole preparation may justify a powered arrangement where the applicable ICCONS equipment permits it.
ICCONS provides SDS Plus adaptors for compatible wire-brush & extension systems.
Before assembling the setup, verify:
► Brush family
► Brush connection
► Adaptor type
► Extension
► Compatible equipment
► Anchor-system instructions
Where suitable drilling equipment is also required for the project, Hammer Drills provides an adjoining equipment pathway.
Using an adaptor does not remove any cleaning stage required by the chemical-anchor procedure.
Deep Injection Needs Control Beyond the Hole Entrance
Long embedments create a resin-placement challenge after the bore has already been drilled & cleaned.
ICCONS supplies a 1.0 metre plastic extension tube for applicable adhesive nozzles together with piston plugs for deep & overhead embedment applications.
Piston-plug options are documented across multiple drilled-hole diameters.
Before injection, determine:
► Bore diameter
► Embedment depth
► Adhesive system
► Nozzle arrangement
► Extension requirement
► Piston-plug requirement
► Hole orientation
Follow the relevant injection procedure so adhesive is placed through the required depth rather than simply deposited near the opening.
Overhead Anchoring Brings Gravity Into the Setup
Working above the installer changes access & makes controlled adhesive placement particularly important.
For applicable overhead work, determine whether the specified installation calls for:
► Nozzle extension
► Piston plug
► Particular injection sequence
► Different access equipment
► Additional site controls
Prepare these items before dispensing begins.
Once mixed adhesive is moving through the nozzle, stopping to locate a missing deep-injection component can waste both working time & material.
Hollow Masonry Needs Somewhere to Hold the Resin
Brick or block cavities change adhesive behaviour because an open void sits behind the drilled face.
ICCONS provides Chemselect mesh sleeves & plastic sleeves for applicable hollow-material anchoring.
Their purpose is different from ordinary hole-cleaning equipment: the sleeve helps contain adhesive around the anchor element within the hollow substrate.
Identify:
► Masonry type
► Solid or hollow construction
► Hole diameter
► Required sleeve
► Anchor element
► Adhesive system
Where the connection does not require chemical anchoring, compare Anchors & Wall Plugs for suitable alternative masonry-fixing methods.
Concrete & Hollow Block Shouldn't Receive the Same Assumed Setup
The fixing may look similar above the surface while the installation underneath behaves very differently.
A solid concrete bore can accept adhesive directly when prepared according to the relevant procedure.
A hollow masonry installation may require a sleeve to retain the resin around the anchor element.
That difference can change:
► Drilling method
► Hole dimensions
► Cleaning requirements
► Sleeve selection
► Adhesive placement
► Anchor insertion
Confirm the substrate before equipment is packed for the job.
Filler Washers Belong to a Specific Fixing Function
Some accessories in this family work around the connection rather than inside the drilled bore.
ICCONS includes adhesive filler washers among its adhesive products.
Do not confuse a specialised filler washer with an ordinary washer selected purely by outside diameter or appearance.
For conventional nuts & washer hardware elsewhere in an assembly, use Nuts & Washers as the separate hardware pathway.
Keeping system-specific components distinguishable reduces the chance of an unsuitable substitution during installation.
Spare Nozzles Can Matter on Interrupted Work
Once two-component adhesive has mixed inside a static nozzle, a long pause can leave cured material in that nozzle even when usable product remains in the cartridge.
For larger fixing programs, consider:
► Number of anchor positions
► Likely interruptions
► Adhesive working conditions
► Cartridge quantity
► Spare compatible nozzles
Never force material through a mixer that has become blocked with cured resin.
Fit the correct replacement according to the product instructions then complete the required preparation before injection resumes.
Prepare the Holes Before Starting the First Cartridge
Cartridge working time is better spent installing anchors than waiting for unfinished drilling or searching for missing components.
Before injection begins, confirm that the applicable holes have been:
► Drilled to specification
► Cleaned according to the required procedure
► Checked for depth
► Matched with the intended anchor elements
► Protected from new contamination
Lay out the mixer nozzles, extensions, sleeves & other required equipment before dispensing starts.
For crews coordinating larger site workloads, Spring Jobsite Prep Getting Your Gear Ready covers practical preparation of tools & consumables.
Rebar Installations Can Increase the Scale of the Setup
Post-installed reinforcing work can involve deeper bores & larger diameters than many everyday threaded-stud connections.
Depending on the specified system, preparation may call for:
► Larger wire brushes
► Brush extensions
► Blow equipment
► Deep-injection extensions
► Piston plugs
► Suitable adhesive-delivery equipment
Follow the engineering requirements & installation documentation for the exact rebar application.
Do not transfer dimensions or preparation methods from a threaded-rod installation merely because both use injection adhesive.
Keep Cleaned Holes Clean
A prepared bore can collect new material if nearby drilling or cutting continues before the anchor is installed.
Possible contamination includes:
► Concrete dust
► Cutting debris
► Water
► General site material
If the hole is affected after cleaning, reassess its condition before injection.
Repeat the required preparation where necessary rather than assuming an earlier cleaning cycle remains valid.
For a broader reference on common anchor & fastening families, read the Fastener Guide Bolts Screws Anchors.
Organise Small Accessories by System
Mixer nozzles, sleeves, adaptors & plugs can be easy to mix together once their original packaging has been opened.
A practical storage arrangement can separate components by:
► Chemical anchor family
► Cartridge format
► Hole diameter
► Sleeve size
► Brush type
► Adaptor connection
► Deep-injection equipment
Clear identification becomes particularly useful when one crew installs several Chemselect systems.
Keep current installation information accessible with the corresponding products.
Check the Whole Setup Before Leaving the Workshop
One inexpensive missing component can prevent an otherwise complete chemical-anchor kit from being used.
Before mobilisation, run through the work sequence rather than checking items randomly.
Drilling
Correct drill bits & equipment.
Cleaning
Specified brushes, blow equipment, adaptors & extensions.
Injection
Chemical adhesive, applicator, mixer nozzles, nozzle extensions & piston plugs where required.
Anchoring
Correct threaded elements, sleeves or associated components.
For other equipment used around drilling & fixing work, Power Tool Accessories provides a useful supporting range.