Practical Pack Sizes for MDF, Particleboard & Soft Timber Fixing
When a workshop or fit-out crew reaches for the same screws throughout the day, pack size becomes part of the buying decision. ICCONS® | Chipboard Scews Trade Packs combine purpose-designed chipboard screws with quantities suited to regular fastening work across very soft timber, MDF & particleboard. Their aggressive coarse thread, thin shank & six-nib countersunk head are designed around positive bite, reduced strip-out & straightforward head seating in compatible materials.
Cabinet makers, furniture builders, partition installers, formworkers & general construction crews can select from different lengths, gauges & finishes according to the material being assembled. Documented ICCONS Trade Packs include zinc yellow & Class 3 galvanised configurations with PH2 countersunk heads.
For wider project requirements, browse Screws & Anchors, keep commonly used fastening hardware together with Bolts & Fasteners or prepare the driving setup with Drill Accessories.
► Designed for very soft timber, MDF & particleboard
► Aggressive coarse thread
► Thin shank
► Six-nib self-embedding countersunk head
► PH2 drive
► Zinc yellow & Class 3 galvanised options
► 8 & 10 gauge configurations
► Trade packs containing 20, 50 or 100 screws depending on size
What Are ICCONS® Chipboard Screw Trade Packs?
These packs contain ICCONS chipboard screws developed specifically for fastening compatible timber-based materials.
Rather than adapting a general construction screw to board work, the design combines three important characteristics.
► Aggressive coarse thread – bites firmly into soft base materials
► Thin shank – works with the thread design to help minimise strip-out
► Six-nib head – assists countersinking as the screw reaches its final position
ICCONS lists the range for applications including:
► Furniture construction
► Cabinet making
► Office partitioning
► Formwork
► General-purpose fixing in suitable materials
The screws are supplied in Trade Pack quantities according to size, giving buyers a straightforward way to keep commonly used configurations available for ongoing work.
Why Does the Six-Nib Head Matter?
Look underneath the countersunk head & you'll find six ribs positioned around its underside.
These nibs help the head embed into compatible material as the screw reaches its final seating position.
That is particularly useful in furniture, cabinetry & board assembly where a protruding screw head can interfere with:
► Adjacent components
► Hardware placement
► Finishing work
► Panel alignment
► The completed surface
Head seating still needs control. Keep the PH2 bit engaged positively & watch the final stage of installation rather than continuing to drive unnecessarily once the screw has seated correctly.
For broader advice on matching a fastener to the material it is joining, read Why Good Fasteners Matter More Than the Tool You Drive Them With.
Choose the Screw Around the Assembly
Chipboard screw selection becomes easier when the finished assembly is considered before the box is opened.
|
Job
|
Material Consideration
|
Screw Detail to Check
|
Practical Reason
|
|
Cabinet carcass assembly
|
MDF or particleboard components
|
Length & gauge
|
Suit the joined components
|
|
Furniture construction
|
Compatible soft timber or board
|
Head seating & length
|
Keep the fixing appropriately positioned
|
|
Office partitioning
|
Board-based components
|
Length & finish
|
Match the assembly & environment
|
|
Formwork
|
Suitable timber material
|
Length & finish
|
Select for the fastening position
|
|
Workshop repairs
|
Existing board or soft timber
|
Existing dimensions & material condition
|
Match the replacement to the job
|
Measure the components being joined rather than choosing a screw solely because the pack is already open.
Cabinet Making Rewards Controlled Head Seating
Cabinet work places screws close to finished surfaces, edges, hardware & adjoining panels.
Before assembly, check:
► Board type
► Board thickness
► Screw length
► Fixing position
► Edge distance
► PH2 bit condition
► Required head seating
The six-nib countersunk head is designed to assist embedding but driver control remains important.
Driving substantially deeper than required can damage the surrounding board or reduce the quality of the finished assembly.
For measuring components & marking fixing positions before assembly, browse Measuring & Layout Tools.
MDF & Particleboard Need a Screw Designed to Bite Into Soft Material
MDF & particleboard behave differently from solid steel or masonry.
ICCONS uses an aggressive coarse thread with a thin shank across its Chipboard Trade Packs to provide firm bite in very soft timber-based materials while helping minimise strip-out.
That combination is relevant for repeated assembly where the screw needs to establish its hold without relying on a steel-drilling point or masonry anchor.
When working near board edges:
► Mark the fixing position accurately
► Keep the screw square
► Avoid unnecessary driver force
► Watch the head as it seats
► Check the completed joint before continuing the run
Good installation technique remains important even when the fastener has been designed specifically for the material.
Trade Pack Quantities Change With Screw Size
Not every ICCONS Chipboard Trade Pack contains the same number of screws.
The documented range uses quantities that vary with screw dimensions.
8 Gauge Trade Packs
Applicable 8-9 screws from 20 mm through 57 mm are supplied in packs of 100 across documented zinc yellow & Class 3 galvanised configurations.
10 Gauge Trade Packs
Longer 10-8 configurations are available in 65 mm, 75 mm & 100 mm lengths.
Pack quantities vary by finish & size, with documented options containing 20 or 50 screws.
This is worth checking when ordering for repetitive work.
Compare the quantity printed for the exact configuration rather than assuming every Trade Pack contains 100 fasteners.
Furniture Construction Can Use Several Lengths on One Build
A furniture workshop may assemble different component thicknesses within the same project.
One screw length may suit a particular panel connection while another is required elsewhere.
Before distributing screws across benches, separate packs by:
► Gauge
► Length
► Finish
► Intended assembly
► Workstation
This reduces the chance of a longer screw being picked up simply because its head looks identical to the shorter fastener beside it.
Where hand tools are also needed for assembly, adjustment or hardware fitting, browse Hand Tools.
Zinc Yellow or Class 3 Galvanised?
ICCONS supplies Chipboard Trade Packs in two documented finish groups.
Zinc Yellow
Zinc yellow configurations provide an option for appropriate internal applications.
Class 3 Galvanised
Class 3 galvanised variants provide additional corrosion protection for suitable applications requiring that finish.
The finish should be considered alongside:
► Installation environment
► Connected material
► Exposure conditions
► Project requirements
► Expected service conditions
Do not choose the finish from colour alone.
The required application & environment should determine which available configuration is appropriate.
Office Partitioning Benefits From Keeping the Correct Fastener at the Work Area
Partition installation can involve repeated board-based connections across multiple rooms or work zones.
A simple setup can prevent unnecessary interruptions:
► Confirm the required screw configuration
► Estimate the quantity needed for the work area
► Keep the correct Trade Packs with the crew
► Carry serviceable PH2 bits
► Separate different screw lengths
► Replenish before the active box is empty
This is where Trade Pack quantities become particularly practical. Crews can organise fasteners around the work being completed rather than handling loose mixed screws.
For planning consumables & equipment before a busy project, see Spring Jobsite Prep Getting Your Gear Ready.
Formwork Changes the Buying Priorities
A cabinet maker may place considerable emphasis on a neat finished surface. Formwork crews can have different priorities.
For suitable formwork applications, buyers may be more concerned with:
► Correct screw length
► Suitable finish
► Pack quantity
► Fast access to replacement screws
► Reliable PH2 driving setup
► Keeping different sizes separated
The same ICCONS chipboard screw characteristics remain relevant but the way crews select & manage stock changes with the work.
Buying by application helps keep the right dimensions where they're actually being consumed.
Match the PH2 Bit to Repetitive Work
The documented ICCONS Chipboard Trade Pack range uses a PH2 drive.
A worn bit can become increasingly noticeable across repeated cabinet, furniture or partition assembly.
Before a longer fastening run:
► Check the PH2 bit for wear
► Make sure it engages fully
► Keep the driver aligned with the screw
► Control the final seating stage
► Carry a replacement bit
► Change worn bits before engagement deteriorates further
For projects involving several fastener types, keeping bits organised by drive style can also reduce interruptions when moving between tasks.
Practical Tips for Working With Chipboard Screws
► Check the board thickness first. Select screw length around the actual components being joined.
► Keep different lengths apart. Similar heads can make mixed screws difficult to identify quickly.
► Watch edge positioning. Accurate placement matters when working close to board edges or corners.
► Control the countersunk head. Let the six-nib design assist seating without unnecessarily overdriving the screw.
► Use a serviceable PH2 bit. Positive drive engagement becomes increasingly important during repetitive assembly.
► Check the pack quantity. Longer 10 gauge configurations may contain fewer screws than the 8 gauge packs.
► Select the finish for the environment. Zinc yellow & Class 3 galvanised options serve different application requirements.
► Keep opened packs identifiable. Retaining the original size information helps prevent loose screws being mixed between configurations.
For further reading on choosing construction fixings for their actual material & application, visit the Fastener Guide Bolts Screws Anchors.
