► ICCONS® | Adhesives & Accessories

Equip Chemical Anchor Installations From Drilling to Injection The adhesive cartridge is only one component of a chemical anchoring installation. ICCONS® | Adhesives & Accessories cover the supporting equipment used to clean drilled holes, mix resin correctly, reach deeper embedments & control adhesive placement in compatible concrete & masonry applications....

Equip Chemical Anchor Installations From Drilling to Injection

The adhesive cartridge is only one component of a chemical anchoring installation. ICCONS® | Adhesives & Accessories cover the supporting equipment used to clean drilled holes, mix resin correctly, reach deeper embedments & control adhesive placement in compatible concrete & masonry applications.

For concreters, structural installers, builders & civil contractors, the required setup depends on the substrate, chemical anchor, hole dimensions & anchor element. Compare Anchor Bolts for adjoining anchoring requirements, prepare concrete with  Concrete Cutting & Drilling Tools or organise the drilling stage through Drill Accessories.

Depending on the ICCONS system, installation equipment can include:

► Mixer nozzles
► Adhesive nozzle extensions
► Blow pumps
► Standard wire brushes
► Performance wire brushes
► Brush extensions
► SDS Plus brush adaptors
► Piston plugs
► Plastic sleeves
► Mesh sleeves
► Adhesive filler washers

What Are ICCONS® Adhesives & Accessories?

Each accessory handles a particular part of getting chemical adhesive from the cartridge into a correctly prepared connection.

Rather than performing one common task, the range covers several stages:

Stage

Relevant Equipment

Hole preparation

Blow pumps & wire brushes

Deeper cleaning

Brush extensions & compatible adaptors

Resin mixing

System-matched mixer nozzles

Extended injection

Nozzle extensions

Deep or overhead placement

Applicable piston plugs

Hollow masonry

Plastic or mesh sleeves

Selected fixing arrangements

Adhesive filler washers

The equipment required for one adhesive system should not automatically be carried across to another.

Start With the Installation Rather Than the Accessory

A useful equipment list comes from the fixing specification, not from filling a toolbox with every available component.

Before ordering, establish:

► Base material
► Chemical adhesive
► Cartridge size & format
► Anchor element
► Drill-hole diameter
► Embedment depth
► Required cleaning procedure
► Injection method
► Mixer-nozzle specification
► Sleeve requirement where applicable

Once those details are known, the supporting components become much easier to identify.

Mixer Nozzles Must Suit the Chemical Adhesive

Correct resin mixing happens before the material reaches the anchor hole.

ICCONS provides dedicated mixer nozzles for its Chemselect injection systems, including configurations for BIS-PE Gen3, BIS-E, BIS-HY Gen2, BIS-V & BIS-P Gen2.

Compatibility matters because different adhesive systems use their specified mixing arrangement.

Before opening a cartridge, check:

► Adhesive product
► Cartridge format
► Correct mixer nozzle
► Applicator compatibility
► Any required nozzle extension

Do not substitute a nozzle simply because it appears to connect to the cartridge.

For broader information on how fixing components work together, read Why Good Fasteners Matter More Than the Tool You Drive Them With.

Hole Cleaning Happens Before Resin Injection

Drilling leaves material inside the bore that may need to be removed through a defined cleaning sequence.

ICCONS provides blow pumps, standard wire brushes, performance wire brushes & related extensions for applicable anchor installations.

Depending on the chemical anchor, preparation can involve:

► Blowing loose material from the hole
► Brushing the bore wall
► Repeating prescribed cleaning stages
► Reaching the complete embedment depth
► Using the brush family specified for the adhesive system

Follow the instructions for the exact chemical anchor being installed.

A familiar cleaning routine from another product is not a substitute for the procedure belonging to the current system.

Brush Selection Begins With the Drilled Hole

Threaded rod size, reinforcing-bar diameter & drill-hole diameter are related measurements but they are not necessarily identical.

When brushing is specified, establish the actual bore dimension before choosing the accessory.

Check:

► Drill-bit diameter
► Required hole depth
► Brush diameter
► Standard or performance brush family
► Extension requirements
► Applicable cleaning sequence

ICCONS supplies brush options across different diameters together with accessories for deeper preparation.

Where structural threaded hardware forms part of the finished connection, browse  Structural Fasteners & Bolts.

Greater Embedment Depth Requires Greater Reach

A correctly sized brush cannot prepare the full bore if its working length stops short of the specified embedment.

ICCONS brush extensions provide additional reach for applicable deeper holes.

Review:

► Total hole depth
► Brush length
► Extension compatibility
► Adaptor requirements
► Access around the fixing position

Deep embedments deserve particular attention because conditions at the bottom of the hole cannot be judged from the entrance.

The cleaning equipment needs to reach the depth called for by the installation.

SDS Plus Adaptors Can Change How the Brush Is Driven

Repeated hole preparation may justify a powered arrangement where the applicable ICCONS equipment permits it.

ICCONS provides SDS Plus adaptors for compatible wire-brush & extension systems.

Before assembling the setup, verify:

► Brush family
► Brush connection
► Adaptor type
► Extension
► Compatible equipment
► Anchor-system instructions

Where suitable drilling equipment is also required for the project,  Hammer Drills provides an adjoining equipment pathway.

Using an adaptor does not remove any cleaning stage required by the chemical-anchor procedure.

Deep Injection Needs Control Beyond the Hole Entrance

Long embedments create a resin-placement challenge after the bore has already been drilled & cleaned.

ICCONS supplies a 1.0 metre plastic extension tube for applicable adhesive nozzles together with piston plugs for deep & overhead embedment applications.

Piston-plug options are documented across multiple drilled-hole diameters.

Before injection, determine:

► Bore diameter
► Embedment depth
► Adhesive system
► Nozzle arrangement
► Extension requirement
► Piston-plug requirement
► Hole orientation

Follow the relevant injection procedure so adhesive is placed through the required depth rather than simply deposited near the opening.

Overhead Anchoring Brings Gravity Into the Setup

Working above the installer changes access & makes controlled adhesive placement particularly important.

For applicable overhead work, determine whether the specified installation calls for:

► Nozzle extension
► Piston plug
► Particular injection sequence
► Different access equipment
► Additional site controls

Prepare these items before dispensing begins.

Once mixed adhesive is moving through the nozzle, stopping to locate a missing deep-injection component can waste both working time & material.

Hollow Masonry Needs Somewhere to Hold the Resin

Brick or block cavities change adhesive behaviour because an open void sits behind the drilled face.

ICCONS provides Chemselect mesh sleeves & plastic sleeves for applicable hollow-material anchoring.

Their purpose is different from ordinary hole-cleaning equipment: the sleeve helps contain adhesive around the anchor element within the hollow substrate.

Identify:

► Masonry type
► Solid or hollow construction
► Hole diameter
► Required sleeve
► Anchor element
► Adhesive system

Where the connection does not require chemical anchoring, compare  Anchors & Wall Plugs for suitable alternative masonry-fixing methods.

Concrete & Hollow Block Shouldn't Receive the Same Assumed Setup

The fixing may look similar above the surface while the installation underneath behaves very differently.

A solid concrete bore can accept adhesive directly when prepared according to the relevant procedure.

A hollow masonry installation may require a sleeve to retain the resin around the anchor element.

That difference can change:

► Drilling method
► Hole dimensions
► Cleaning requirements
► Sleeve selection
► Adhesive placement
► Anchor insertion

Confirm the substrate before equipment is packed for the job.

Filler Washers Belong to a Specific Fixing Function

Some accessories in this family work around the connection rather than inside the drilled bore.

ICCONS includes adhesive filler washers among its adhesive products.

Do not confuse a specialised filler washer with an ordinary washer selected purely by outside diameter or appearance.

For conventional nuts & washer hardware elsewhere in an assembly, use Nuts & Washers as the separate hardware pathway.

Keeping system-specific components distinguishable reduces the chance of an unsuitable substitution during installation.

Spare Nozzles Can Matter on Interrupted Work

Once two-component adhesive has mixed inside a static nozzle, a long pause can leave cured material in that nozzle even when usable product remains in the cartridge.

For larger fixing programs, consider:

► Number of anchor positions
► Likely interruptions
► Adhesive working conditions
► Cartridge quantity
► Spare compatible nozzles

Never force material through a mixer that has become blocked with cured resin.

Fit the correct replacement according to the product instructions then complete the required preparation before injection resumes.

Prepare the Holes Before Starting the First Cartridge

Cartridge working time is better spent installing anchors than waiting for unfinished drilling or searching for missing components.

Before injection begins, confirm that the applicable holes have been:

► Drilled to specification
► Cleaned according to the required procedure
► Checked for depth
► Matched with the intended anchor elements
► Protected from new contamination

Lay out the mixer nozzles, extensions, sleeves & other required equipment before dispensing starts.

For crews coordinating larger site workloads, Spring Jobsite Prep Getting Your Gear Ready covers practical preparation of tools & consumables.

Rebar Installations Can Increase the Scale of the Setup

Post-installed reinforcing work can involve deeper bores & larger diameters than many everyday threaded-stud connections.

Depending on the specified system, preparation may call for:

► Larger wire brushes
► Brush extensions
► Blow equipment
► Deep-injection extensions
► Piston plugs
► Suitable adhesive-delivery equipment

Follow the engineering requirements & installation documentation for the exact rebar application.

Do not transfer dimensions or preparation methods from a threaded-rod installation merely because both use injection adhesive.

Keep Cleaned Holes Clean

A prepared bore can collect new material if nearby drilling or cutting continues before the anchor is installed.

Possible contamination includes:

► Concrete dust
► Cutting debris
► Water
► General site material

If the hole is affected after cleaning, reassess its condition before injection.

Repeat the required preparation where necessary rather than assuming an earlier cleaning cycle remains valid.

For a broader reference on common anchor & fastening families, read the Fastener Guide Bolts Screws Anchors.

Organise Small Accessories by System

Mixer nozzles, sleeves, adaptors & plugs can be easy to mix together once their original packaging has been opened.

A practical storage arrangement can separate components by:

► Chemical anchor family
► Cartridge format
► Hole diameter
► Sleeve size
► Brush type
► Adaptor connection
► Deep-injection equipment

Clear identification becomes particularly useful when one crew installs several Chemselect systems.

Keep current installation information accessible with the corresponding products.

Check the Whole Setup Before Leaving the Workshop

One inexpensive missing component can prevent an otherwise complete chemical-anchor kit from being used.

Before mobilisation, run through the work sequence rather than checking items randomly.

Drilling

Correct drill bits & equipment.

Cleaning

Specified brushes, blow equipment, adaptors & extensions.

Injection

Chemical adhesive, applicator, mixer nozzles, nozzle extensions & piston plugs where required.

Anchoring

Correct threaded elements, sleeves or associated components.

For other equipment used around drilling & fixing work, Power Tool Accessories provides a useful supporting range.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Showing 0 of 0 products

No products found
Use fewer filters or clear all

Why Source ICCONS® Adhesives & Accessories Through Industrial Shed?

Chemical-anchor work is easier to organise when the supporting equipment is considered alongside the adhesive, drilling method & anchor element.

Industrial Shed supplies fixing hardware, drilling equipment & installation accessories for contractors working across concrete anchoring, structural installation, civil works & commercial construction.

Need to confirm which mixer nozzle, sleeve, brush or deep-injection accessory belongs with a particular setup? Call us at with the ICCONS adhesive, cartridge format, base material & anchor element.

For businesses purchasing fixing consumables across recurring projects, Trade exclusives provides a dedicated pathway for trade customers.

Have the Complete Installation Kit Ready Before the Cartridge Opens

Chemical anchoring runs more smoothly when drilling, cleaning, mixing & injection equipment has already been matched to the connection.

Confirm the substrate & anchor element first, then assemble the accessories specified for the chemical adhesive. Account for deeper bores, hollow masonry & overhead work before installation starts rather than adapting the setup after resin is already being dispensed.

A missing nozzle, sleeve or extension is a small component with the potential to stop the entire fixing sequence.

Choose ICCONS Adhesives & Accessories to support correctly prepared & controlled chemical-anchor installations across compatible concrete & masonry applications.

Frequently Asked Questions

The ICCONS installation range includes products such as mixer nozzles, blow pumps, wire brushes, brush extensions, SDS Plus adaptors, piston plugs, plastic & mesh sleeves plus adhesive filler washers.

The nozzle is part of mixing the cartridge components during dispensing. Use the nozzle identified for the exact ICCONS adhesive system.

ICCONS documents piston plugs for applicable deep & overhead embedment applications. Select the plug & injection setup required for the specified drilled-hole diameter & anchor system.

Compatible sleeves are used in applicable hollow masonry installations to help contain adhesive around the anchor element within the substrate.

No. ICCONS chemical anchors can have different preparation requirements. Check the current installation instructions for the exact adhesive being installed.

ICCONS provides SDS Plus adaptors for compatible brush & extension systems. Confirm the correct accessory combination before use.

Brands

ICCONS®

ICCONS®

Solutions Built for Tradies: How Industrial Shed Powers Your Success

At Industrial Shed, we understand that reliable tools are the backbone of any successful project. That’s why we stock durable, high-performance equipment designed to handle tough jobs without breakdowns or delays. Trade professionals across the Mornington Peninsula and Melbourne trust our range for its dependability and long-lasting quality.

As an independent tool retailer, we take pride in offering only the most trusted brands to ensure you get the job done right the first time. Whether you need hand tools, power tools, or workshop essentials, our carefully curated selection guarantees reliability, so you can focus on your work with confidence.

Struggling to locate specialised tools for your trade? Industrial Shed has you covered. Our extensive range ensures trade professionals across the Mornington Peninsula and Melbourne have access to niche products without the hassle of searching multiple suppliers. From unique fasteners to specialty power tools, we make it simple to find exactly what you need.

As a local, independent tool retailer, we understand the challenges tradies face in sourcing specific equipment. Our team is here to provide expert advice and personalised support, ensuring you have the right tools for the job—every time.

At Industrial Shed, we know the trade industry inside out. As an independent tool shop based on the Mornington Peninsula, we are deeply familiar with the needs of local tradies and construction professionals. Our curated selection of tools is designed to meet the demands of both large-scale projects and everyday trade work.

Our team provides tailored advice and practical solutions to ensure you’re equipped with the right tools and equipment for every job. With years of experience serving Melbourne and Mornington Peninsula professionals, we are your trusted partner for all things trade.

At Industrial Shed, we simplify your workday by offering everything you need under one roof. From hand tools and power tools to fasteners, workwear, and safety gear, our one-stop shop helps trade professionals save valuable time. No more running between multiple suppliers—we have it all.

Serving the Mornington Peninsula and Melbourne regions, we take pride in making your tool shopping experience efficient and straightforward. As an independent retailer, we focus on delivering high-quality products with the service and support you can rely on.

Your safety is our priority at Industrial Shed. We stock a full range of durable workwear, safety equipment, and PPE to keep you and your team protected on-site. From hi-vis clothing to helmets and gloves, our collection is designed with the toughest conditions in mind.

Trade professionals on the Mornington Peninsula and in Melbourne trust us for reliable safety solutions. With expert advice and a commitment to quality, we make sure you have the gear you need to stay safe while getting the job done.

Demanding projects require tools you can trust. At Industrial Shed, our heavy-duty tools and equipment are built to handle the toughest challenges on any worksite. Whether it’s power tools, concrete tools, or lifting gear, we’ve got the equipment you need to perform.

Serving trade professionals across the Mornington Peninsula and Melbourne, we specialise in high-performance tools that stand up to wear and tear. As an independent tool retailer, we provide personalised service to ensure you have the strength and reliability to succeed.

At Industrial Shed, we believe that balancing cost and performance shouldn’t mean compromising on quality. Our range of high-performance tools is competitively priced to ensure Melbourne and Mornington Peninsula tradies stay within budget while using the best gear.

From hand tools to power tools, we stock trusted brands that deliver value and durability. As an independent retailer, we’re committed to providing trade professionals with reliable tools that won’t break the bank—or let you down.

At Industrial Shed, we understand the importance of reliable power on the job. Our range of generators and portable power solutions is designed to keep your tools and equipment running smoothly, no matter where you’re working.

From small repairs to large-scale projects across the Mornington Peninsula and Melbourne, our power solutions are trusted by trade professionals. As your local tool shop, we offer expert advice to ensure you’re equipped with the right tools for uninterrupted productivity.

Avoid costly project delays with Industrial Shed’s consistently stocked inventory. We ensure trade professionals across the Mornington Peninsula and Melbourne have quick access to the tools, fasteners, and supplies they need to get the job done on time.

As an independent retailer, we pride ourselves on being a reliable partner for tradies, offering high-quality products and personalised service. When you shop with us, you’ll never have to worry about supply shortages holding you back.

At Industrial Shed, we’re more than just a tool retailer—we’re your partner in productivity. Serving Melbourne and the Mornington Peninsula, we provide trade professionals with the trusted tools, advice, and support they need to succeed on every project.

Our independent approach ensures we prioritise your needs, from reliable product recommendations to tailored solutions. With our high-quality gear and expert service, you can count on us to help you work smarter and achieve more.