► ICCONS® | Adhesive - Cartridge Guns

Controlled Dispensing for Chemical Anchor Installation A few chemical anchors & a full day of repetitive injection work place very different demands on dispensing equipment. ICCONS® Adhesive Cartridge Guns provide manual, battery-operated & pneumatic options for compatible Chemselect Pure Epoxy, Hybrid, Vinylester & Polyester construction adhesives. The right dispenser depends...

Controlled Dispensing for Chemical Anchor Installation

A few chemical anchors & a full day of repetitive injection work place very different demands on dispensing equipment. ICCONS® Adhesive Cartridge Guns provide manual, battery-operated & pneumatic options for compatible Chemselect Pure Epoxy, Hybrid, Vinylester & Polyester construction adhesives.

The right dispenser depends on more than cartridge capacity. Adhesive family, cartridge format, installation quantity, embedment depth & available power or compressed air all influence which tool makes practical sense on site. A manual gun can suit occasional fixing work, while powered dispensing can reduce physical effort when anchor quantities & adhesive consumption increase.

Prepare the wider installation with compatible Adhesives & Tapes, Drill Accessories & Concrete Cutting & Drilling Tools.

What Are ICCONS® Adhesive Cartridge Guns?

ICCONS® Adhesive Cartridge Guns are purpose-built dispensing tools that apply the force required to move chemical anchoring adhesive from a compatible cartridge. Depending on the model, that force is generated manually, by battery power or through compressed air.

Different Chemselect products use different cartridge capacities & configurations, so the dispenser should be selected around the adhesive being installed rather than treated as a universal cartridge holder.

The ICCONS® range includes:

► Manual cartridge guns – straightforward dispensing for compatible cartridges where portability & simplicity are prioritie
► Battery-operated cartridge guns – powered delivery suited to repetitive chemical anchoring & higher adhesive consumption
► Pneumatic cartridge guns – compressed-air systems for demanding, high-volume adhesive applications
► Multi-format dispensers – selected tools capable of accepting several compatible cartridge capacities

Available configurations cover cartridge formats including 280/300 ml, 385 ml, 420 ml, 440 ml, 500 ml, 585 ml & 1400 ml, depending on the dispenser & adhesive system.

Why Choose ICCONS® Adhesive Cartridge Guns?

Match Dispensing Effort to the Size of the Job

Manual operation can be entirely practical when only a limited number of anchors need adhesive. It keeps the equipment simple, portable & independent of batteries or compressed air.

Once the fixing schedule expands, powered delivery becomes more attractive. Battery & pneumatic options can reduce repeated hand effort where crews are dispensing larger quantities throughout the working day.

Use Equipment Designed Around the Cartridge

Cartridge dimensions alone don't confirm that a dispenser is suitable. Capacity, adhesive family & cartridge configuration all need to correspond with the selected tool.

For Pure Epoxy applications, for example, ICCONS® provides dedicated dispensing options covering compatible 385, 440, 500 & 585 ml formats depending on the model.

Improve Control During Repetitive Work

Fast material delivery isn't useful if the installer can't regulate it effectively. Selected ICCONS® powered dispensers incorporate variable-speed trigger control, allowing material flow to be adjusted during application.

This becomes useful when moving between different hole dimensions, embedment depths & adhesive volumes.

Reduce Hand Fatigue on Larger Installation Programs

Hundreds of trigger cycles can turn dispensing effort into a productivity issue. Powered cartridge guns reduce the repeated manual force required during larger chemical anchoring programs.

For deep holes or substantial Pure Epoxy consumption, that difference can become particularly valuable over a full shift.

Common Applications

Equipment & Base-Plate Anchoring

Machinery, brackets, frames & base plates can require accurately positioned chemical anchors before equipment is secured. The dispenser delivers the nominated adhesive into prepared holes before the threaded anchor is inserted according to the specified procedure.

Where related structural hardware is required elsewhere within the connection, browse Structural Fasteners & Bolts.

Repetitive Concrete Fixing

Anchor quantity changes the economics of the dispensing method. A manual gun may handle a small installation efficiently, while repeated injection across numerous concrete fixing locations can make battery operation considerably more practical.

Planning fixing locations before drilling can also reduce interruptions. Measuring & Leveling Tools support accurate set-out for brackets, plates & repeated anchor positions.

Deep-Embedment Anchoring

Greater embedment can mean substantially more adhesive per fixing. ICCONS® identifies powered Pure Epoxy dispensing equipment as suitable for demanding applications where larger quantities of material need to be delivered efficiently.

Hole depth, adhesive volume, injection method & anchor specification still need to follow the requirements for the selected system.

Hollow Masonry Installation

Hollow substrates need more than controlled trigger pressure. Where specified, a compatible sleeve can help contain injected adhesive around the anchor rather than allowing material to escape into the cavity.

For other masonry fixing requirements encountered across the same project, Anchors & Wall Plugs provides related fastening options.

High-Volume Pure Epoxy Work

Large adhesive requirements can move a project beyond conventional hand-operated dispensing. ICCONS® offers a 1400 ml pneumatic Pure Epoxy system for substantial applications where reducing manual effort & improving material delivery are important considerations.

This type of equipment is particularly relevant where compressed air is already available within the work environment.

Product Selection Guide

Before choosing between manual, battery or pneumatic operation, identify the cartridge that needs to go into the tool. Once compatibility is established, expected anchor quantity & adhesive consumption can help determine the most practical drive method.

Dispensing Type

Compatible Format

Practical Fit

Standard manual

280/300 ml

General lower-volume Chemselect work

420 ml manual

420 ml

Compatible Hybrid, Vinylester & Polyester cartridges

Multi-format manual

Multiple compatible formats

Crews handling several cartridge configurations

Epoxy manual

385/440/500/585 ml

Compatible Epoxy & Pure Epoxy cartridges

420 ml battery

420 ml

Repetitive Hybrid, Vinylester & Polyester injection

Epoxy battery

385/440/585 ml depending on model

Repeated Pure Epoxy & deep-hole work

Epoxy pneumatic

385/585 ml

Higher-volume compatible epoxy dispensing

1400 ml pneumatic

1400 ml

Large-volume Pure Epoxy applications

Occasional Chemical Anchoring

For modest fixing quantities, simplicity can be more valuable than additional power. The ICCONS® CDISP-S manual dispenser is designed for compatible 280 & 300 ml Chemselect cartridges, while CDISP-VP serves compatible 420 ml applications.

Manual operation also removes the need to manage batteries, chargers or an air supply.

Several Pure Epoxy Cartridge Sizes

Different cartridge capacities don't always require completely separate manual dispensers. ICCONS® CDISP-E is designed for compatible 385, 440, 500 & 585 ml Epoxy/Pure Epoxy formats.

ICCONS® also identifies compatibility with standard 385, 440 & 585 ml 3:1 volume-ratio adhesive cartridges from other manufacturers where applicable. Verify the actual cartridge configuration before fitting it.

Repetitive 420 ml Applications

When the same injection process is repeated across many fixing points, battery assistance can reduce physical demand. ICCONS® CDISP-VPBAT is designed for compatible 420 ml Hybrid, Vinylester & Polyester injection products.

Variable-speed trigger operation gives the installer control over delivery while the powered mechanism supplies the dispensing force.

Pure Epoxy & Deep Holes

Dense work schedules & larger adhesive volumes are where battery dispensing becomes particularly useful. ICCONS® provides powered options for compatible Pure Epoxy cartridge formats, including configurations covering 385, 440 & 585 ml depending on the model.

Confirm the exact cartridge before ordering the dispenser.

Large-Scale Epoxy Installation

At the upper end of adhesive consumption, pneumatic equipment provides another option. ICCONS® CPNEU-E1400 is designed around its 1400 ml Pure Epoxy format for large-volume applications.

An appropriate compressed-air supply & the complete adhesive installation requirements need to be considered before using pneumatic equipment.

Expert Tips

Start with the Cartridge Label

The quickest way to narrow the dispenser choice is to identify what will actually be loaded into it. Check the adhesive family, cartridge capacity & format before comparing manual or powered tools.

Similar-looking cartridges shouldn't be assumed to fit the same dispenser.

Estimate Adhesive Consumption Before Mobilising

A tool that feels suitable for five anchors may be inefficient across five hundred. Review the number of holes, embedment depth & expected cartridge consumption before deciding how material will be dispensed.

For broader preparation before busy installation periods, see Spring Jobsite Prep Getting Your Gear Ready.

Complete Hole Preparation Before Loading the Gun

Adhesive working time shouldn't be consumed while fixing locations are still being drilled or cleaned. Prepare the required holes according to the nominated chemical anchor procedure before beginning injection.

This also gives crews an opportunity to confirm drill diameter, depth & anchor position before adhesive enters the hole.

Remember What the Gun Doesn't Do

The dispenser supplies force—it doesn't mix the chemical components or establish anchor capacity. Two-part adhesives still require the correct static mixer, while the completed fixing depends on the specified adhesive, anchor, substrate, embedment, preparation & curing conditions.

For wider guidance around threaded fixing selection, read the Fastener Guide Bolts Screws Anchors.

Stop if Material Flow Changes Unexpectedly

A sudden increase in trigger resistance can indicate a problem downstream of the dispenser. Don't use additional manual, battery or pneumatic force simply to overcome a cured mixer or obstruction.

Stop, inspect the dispensing arrangement & replace consumable components where required by the adhesive instructions.

Prepare Powered Equipment for the Shift

Battery dispensing removes repeated hand effort but introduces another practical requirement: available runtime. For extended fixing programs, include charged batteries & suitable charging arrangements in the site setup.

Useful battery-care practices for trade equipment are covered in Extend Battery Life Charging Habits.

Keep the Finished Connection in Mind

A cartridge gun is an installation tool, not part of the completed anchor. Threaded-stud diameter, grade, embedment & associated hardware still need to correspond with the specified fixing arrangement.

For related threaded hardware used across construction & maintenance work, browse Bolts & Fasteners.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Showing 0 of 0 products

No products found
Use fewer filters or clear all

Why Buy ICCONS® Adhesive Cartridge Guns From Industrial Shed?

Buying the dispenser around the adhesive helps remove uncertainty before equipment reaches site. Industrial Shed supplies ICCONS® cartridge-gun options for construction, concrete fixing, maintenance, infrastructure & industrial applications where reliable chemical adhesive delivery forms part of the installation.

The available range also lets trade buyers scale the equipment to the workload. Manual tools suit straightforward portable dispensing, battery models assist with repetitive installation & pneumatic options address larger adhesive volumes.

For help identifying a dispenser around a particular ICCONS® cartridge format, contact the Industrial Shed Team.

When qualifying stocked equipment is required for scheduled work, check Same day dispatch for current dispatch arrangements.

Put the Right Dispensing Power Behind the Job

Chemical anchoring doesn't demand the same dispensing setup on every site. A short fixing list may call for a dependable manual gun, repeated injection can favour battery assistance & substantial Pure Epoxy work may justify pneumatic delivery.

Make the decision from the cartridge outward. Confirm the adhesive format, assess how much material the installation will consume & choose the ICCONS® dispenser that gives the crew an appropriate balance of control, portability & working effort.

Equip the installation with an ICCONS® cartridge gun suited to the adhesive format & volume of work ahead.

Frequently Asked Questions

Identify the adhesive product, cartridge capacity, cartridge configuration & expected amount of dispensing. These details help determine whether a compatible manual, battery-operated or pneumatic tool is appropriate.

No. Manual dispensers remain practical for many lower-volume applications. Battery operation becomes more useful as anchor quantity, adhesive consumption or dispensing effort increases.

The CDISP-S manual dispenser is designed for compatible ICCONS® 280 & 300 ml Chemselect cartridges.

Yes. ICCONS® identifies CDISP-E for compatible 385, 440, 500 & 585 ml Epoxy/Pure Epoxy injection formats. Verify cartridge configuration before use.

Variable-speed operation allows the installer to regulate material delivery rather than relying on a single dispensing rate. This can provide greater control across different injection requirements.

Pneumatic equipment is particularly suited to higher-volume adhesive work where compatible cartridges are being used & a suitable compressed-air supply is available. ICCONS® also provides a 1400 ml pneumatic Pure Epoxy system for substantial applications.

Brands

ICCONS®

ICCONS®

Solutions Built for Tradies: How Industrial Shed Powers Your Success

At Industrial Shed, we understand that reliable tools are the backbone of any successful project. That’s why we stock durable, high-performance equipment designed to handle tough jobs without breakdowns or delays. Trade professionals across the Mornington Peninsula and Melbourne trust our range for its dependability and long-lasting quality.

As an independent tool retailer, we take pride in offering only the most trusted brands to ensure you get the job done right the first time. Whether you need hand tools, power tools, or workshop essentials, our carefully curated selection guarantees reliability, so you can focus on your work with confidence.

Struggling to locate specialised tools for your trade? Industrial Shed has you covered. Our extensive range ensures trade professionals across the Mornington Peninsula and Melbourne have access to niche products without the hassle of searching multiple suppliers. From unique fasteners to specialty power tools, we make it simple to find exactly what you need.

As a local, independent tool retailer, we understand the challenges tradies face in sourcing specific equipment. Our team is here to provide expert advice and personalised support, ensuring you have the right tools for the job—every time.

At Industrial Shed, we know the trade industry inside out. As an independent tool shop based on the Mornington Peninsula, we are deeply familiar with the needs of local tradies and construction professionals. Our curated selection of tools is designed to meet the demands of both large-scale projects and everyday trade work.

Our team provides tailored advice and practical solutions to ensure you’re equipped with the right tools and equipment for every job. With years of experience serving Melbourne and Mornington Peninsula professionals, we are your trusted partner for all things trade.

At Industrial Shed, we simplify your workday by offering everything you need under one roof. From hand tools and power tools to fasteners, workwear, and safety gear, our one-stop shop helps trade professionals save valuable time. No more running between multiple suppliers—we have it all.

Serving the Mornington Peninsula and Melbourne regions, we take pride in making your tool shopping experience efficient and straightforward. As an independent retailer, we focus on delivering high-quality products with the service and support you can rely on.

Your safety is our priority at Industrial Shed. We stock a full range of durable workwear, safety equipment, and PPE to keep you and your team protected on-site. From hi-vis clothing to helmets and gloves, our collection is designed with the toughest conditions in mind.

Trade professionals on the Mornington Peninsula and in Melbourne trust us for reliable safety solutions. With expert advice and a commitment to quality, we make sure you have the gear you need to stay safe while getting the job done.

Demanding projects require tools you can trust. At Industrial Shed, our heavy-duty tools and equipment are built to handle the toughest challenges on any worksite. Whether it’s power tools, concrete tools, or lifting gear, we’ve got the equipment you need to perform.

Serving trade professionals across the Mornington Peninsula and Melbourne, we specialise in high-performance tools that stand up to wear and tear. As an independent tool retailer, we provide personalised service to ensure you have the strength and reliability to succeed.

At Industrial Shed, we believe that balancing cost and performance shouldn’t mean compromising on quality. Our range of high-performance tools is competitively priced to ensure Melbourne and Mornington Peninsula tradies stay within budget while using the best gear.

From hand tools to power tools, we stock trusted brands that deliver value and durability. As an independent retailer, we’re committed to providing trade professionals with reliable tools that won’t break the bank—or let you down.

At Industrial Shed, we understand the importance of reliable power on the job. Our range of generators and portable power solutions is designed to keep your tools and equipment running smoothly, no matter where you’re working.

From small repairs to large-scale projects across the Mornington Peninsula and Melbourne, our power solutions are trusted by trade professionals. As your local tool shop, we offer expert advice to ensure you’re equipped with the right tools for uninterrupted productivity.

Avoid costly project delays with Industrial Shed’s consistently stocked inventory. We ensure trade professionals across the Mornington Peninsula and Melbourne have quick access to the tools, fasteners, and supplies they need to get the job done on time.

As an independent retailer, we pride ourselves on being a reliable partner for tradies, offering high-quality products and personalised service. When you shop with us, you’ll never have to worry about supply shortages holding you back.

At Industrial Shed, we’re more than just a tool retailer—we’re your partner in productivity. Serving Melbourne and the Mornington Peninsula, we provide trade professionals with the trusted tools, advice, and support they need to succeed on every project.

Our independent approach ensures we prioritise your needs, from reliable product recommendations to tailored solutions. With our high-quality gear and expert service, you can count on us to help you work smarter and achieve more.