► ICCONS® | Adhesive - Accessories

  Reliable Preparation, Mixing & Injection for Chemical Anchoring A chemical anchor cartridge can only perform as intended when the hole is prepared, the resin is mixed correctly & the adhesive reaches the right position inside the substrate. ICCONS® Adhesive Accessories bring together the supporting components used throughout chemical anchoring...

 

Reliable Preparation, Mixing & Injection for Chemical Anchoring

A chemical anchor cartridge can only perform as intended when the hole is prepared, the resin is mixed correctly & the adhesive reaches the right position inside the substrate. ICCONS® Adhesive Accessories bring together the supporting components used throughout chemical anchoring work, including mixer nozzles, blow pumps, wire brushes, brush extensions, piston plugs, sleeves, adaptors & related installation accessories.

Small components can determine whether a larger anchoring job progresses smoothly. Hole-cleaning equipment helps remove drilling debris, mixer nozzles combine two-part resins before dispensing, extensions improve access into deeper holes & sleeves support compatible chemical fixing into hollow masonry.

For drilling & hole preparation, explore Concrete Cutting & Drilling Tools & Drill Accessories. For related bonding & fixing products, see Adhesives & Tapes.

What Are ICCONS® Adhesive Accessories?

ICCONS® Adhesive Accessories are supporting components used to prepare, mix & deliver chemical anchoring systems. Their role can include cleaning anchor holes, mixing adhesive components, extending the injection path, controlling resin placement & supporting installation into different base materials.

The range includes:

► Mixer Nozzles – combine separate adhesive components as resin is dispensed
► Blow Pumps – assist with removing loose dust & drilling debris
► Wire Brushes – clean internal drilled-hole surfaces where brushing is required
► Brush Extensions – increase cleaning reach for deeper anchor holes
► SDS Plus Brush Adaptors – connect compatible brush systems to suitable drilling equipment
► Nozzle Extensions – extend adhesive delivery into deeper or restricted holes
► Piston Plugs – assist controlled resin placement in applicable deeper embedments
► Plastic Sleeves – support chemical fixing into compatible hollow substrates
► Mesh Sleeves – contain & distribute adhesive in suitable hollow masonry
► Retainer Caps & Filler Washers – supporting components for applicable anchoring arrangements

Similar appearance doesn't make these accessories interchangeable. Compatibility depends on the ICCONS® adhesive system, cartridge type, drilled-hole diameter, embedment depth, anchor size & base material.

For broader guidance on fastening selection, read the Fastener Guide Bolts Screws Anchors.

Why Choose ICCONS® Adhesive Accessories?

Correct Mixing Before Injection

Two-component chemical anchors rely on the resin components being mixed correctly before they enter the drilled hole. ICCONS® mixer nozzles combine the cartridge contents during dispensing so mixed adhesive can be delivered through the nozzle.

Different ICCONS® adhesive systems can require different nozzle configurations, so the mixer should be matched to the cartridge rather than selected by appearance.

Thorough Hole Preparation

A drilled hole can still contain loose material even when the opening appears clean. Blow pumps, brushes & extensions support the preparation process where the selected chemical anchor installation requires blowing, brushing or both.

Correctly sized cleaning accessories should be used so the required internal surfaces can be properly cleaned.

Controlled Resin Placement

Deep holes can make adhesive placement difficult to control with a standard nozzle alone. Nozzle extensions & piston plugs provide additional reach for compatible installations where resin needs to be delivered further into the embedment.

This can assist applications where adhesive needs to be placed progressively from deeper inside the hole.

Support for Hollow Masonry

Hollow brick & block require a different approach from solid concrete. ICCONS® plastic & mesh sleeves help retain adhesive around the inserted fixing rather than allowing resin to move freely into internal cavities.

Sleeve size, adhesive type, fixing dimensions & substrate should be checked together.

Common Applications

Chemical Anchoring into Concrete

Reliable concrete anchoring starts before the adhesive cartridge is opened. Hole diameter, embedment depth, cleaning procedure & adhesive type should be confirmed before resin is injected.

Where brushing forms part of the required preparation, correctly sized ICCONS® wire brushes help clean the drilled-hole surface before adhesive is dispensed.

Threaded Rod Installation

Threaded rod needs properly placed adhesive around the embedded section rather than resin concentrated near the hole opening. Mixer nozzles, extensions & cleaning accessories can each support a different stage of the installation.

For additional threaded fastening requirements, Bolts & Fasteners provides related hardware.

Hollow Brick & Block

A cavity behind the drilled face changes what happens to adhesive during injection. Compatible plastic or mesh sleeves can help retain resin around the fixing instead of allowing uncontrolled movement into the hollow substrate.

Confirm sleeve dimensions against the base material, drilled hole & intended fixing.

Deep Embedment Anchors

Longer anchor holes can exceed the practical reach of a standard mixer nozzle. ICCONS® nozzle extensions & applicable piston plugs provide additional reach for compatible deep-hole injection.

The extension, mixer nozzle, adhesive & installation procedure should remain compatible with one another.

Overhead Anchoring

Gravity introduces an additional consideration when chemical anchors are installed overhead. Controlled resin placement becomes particularly important, making compatible injection accessories useful where the selected adhesive system permits overhead installation.

Always confirm that the chemical anchor itself is suitable for the required installation orientation.

Repetitive Commercial Fixing

Preparing a handful of anchors differs considerably from cleaning & injecting a large fixing schedule. Keeping correctly sized brushes, spare mixer nozzles & compatible extensions ready can reduce avoidable interruptions during repetitive chemical anchoring work.

For supporting equipment used around concrete installation, explore Protective Equipment For Concrete Work.

Retrofit & Maintenance Work

Existing structures often create access restrictions that weren't present during original construction. Extensions, sleeves & cleaning accessories can assist where anchors need to be installed around existing equipment, steelwork or confined working areas.

Where surrounding concrete also requires attention, Concrete Repair & Restoration provides related repair products.

Product Selection Guide

Choose each accessory according to the stage of the chemical anchoring process it needs to support. Cleaning, mixing, injection & hollow-substrate installation call for different equipment.

Installation Stage

Accessory

Main Purpose

Hole cleaning

Blow Pump

Removes loose drilling debris

Hole cleaning

Wire Brush

Cleans the internal drilled-hole surface

Deep-hole cleaning

Brush Extension

Extends cleaning reach

Powered brushing

SDS Plus Brush Adaptor

Connects compatible brushes to suitable tools

Resin mixing

Mixer Nozzle

Mixes two-part adhesive during dispensing

Deep injection

Nozzle Extension

Delivers adhesive further into the hole

Controlled injection

Piston Plug

Supports resin placement in applicable deep holes

Hollow masonry

Plastic / Mesh Sleeve

Contains & distributes adhesive around the fixing

Supporting hardware

Retainer Cap / Filler Washer

Used in applicable anchoring arrangements

Match the Mixer Nozzle to the Adhesive

The cartridge determines which mixer should be fitted. ICCONS® Chemselect products use compatible mixer configurations designed for particular adhesive systems.

Examples include:

► CNOZ10-HP – High Performance mixer nozzle for compatible BIS-HY Gen2, BIS-PE Gen3 & BIS-E systems
► CNOZ10-PE – mixer nozzle supplied with an extension for applicable BIS-E use
► CNOZ10-V – mixer nozzle for compatible BIS-V Vinylester & BIS-P Polyester systems

Confirm the current ICCONS® product information for the adhesive & nozzle combination before dispensing.

Select the Brush by Hole Diameter

A brush that passes easily through a hole may not be large enough to clean its internal surface effectively. Match brush dimensions to the drilled-hole requirements of the selected anchor system.

Brush condition should also be checked during repetitive installation work.

Choose Sleeves for Hollow Substrates

Sleeves become important when the base material contains cavities rather than solid material throughout the embedment. Plastic & mesh sleeves provide a means of retaining adhesive around compatible fixings.

Select the sleeve according to the substrate, hole dimensions, fixing & adhesive system.

Use Extensions When Reach Is Limited

Additional adhesive doesn't compensate for resin being delivered in the wrong part of a deep hole. Compatible extensions allow the delivery point to reach further into applicable anchor holes.

Keep the extension matched to the mixer nozzle, adhesive & required installation procedure.

Pair Accessories with Suitable Dispensing Equipment

The mixer & extension still depend on a compatible dispensing tool to move adhesive through the system. Cartridge format, adhesive type & installation volume can influence the dispensing equipment required.

Consider the cartridge, mixer nozzle & dispensing gun together before work begins.

Expert Tips

Prepare the Complete Anchor Kit First

A missing brush, sleeve or mixer nozzle can stop work despite the main adhesive already being on site. Set out the adhesive, compatible mixer, dispensing equipment, cleaning accessories, extensions, sleeves & required fastening components before drilling begins.

Keep Mixer Nozzles with Their Adhesive Family

Different mixers can become difficult to identify once removed from their original packaging. Store replacement nozzles with their corresponding ICCONS® adhesive products & retain product identification wherever practical.

Treat Hole Cleaning as an Installation Step

Drilling dust can remain exactly where the adhesive needs contact with the substrate. Complete the required blowing & brushing procedure where specified before resin is injected.

For practical preparation around tools & site equipment, see Spring Jobsite Prep Getting Your Gear Ready.

Control Injection in Deeper Holes

Deep embedments require attention to where the adhesive is actually being placed. Use compatible extensions or piston plugs where the applicable installation procedure calls for additional reach or controlled filling.

Check Hollow-Masonry Sleeves Before Dispensing

Sleeve compatibility should be established while the cartridge is still closed. Confirm the sleeve, hole dimensions, fixing & base material before mixed adhesive begins flowing.

Keep Cleaning Accessories Organised by Size

Similar-looking brushes can be intended for very different hole diameters. Small Parts Organisers can help separate brushes, nozzles, adaptors & sleeves by application.

Replace Worn or Blocked Components

Installation accessories need to function correctly rather than simply remain physically intact. Replace worn brushes, blocked mixer nozzles, damaged extensions or other components that can no longer perform their intended task.

Follow the Requirements of the Selected Adhesive

Changing the adhesive can also change the required mixer, preparation method or installation procedure. Check the current ICCONS® instructions for the adhesive, substrate, fixing, embedment & installation conditions being used.

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old

Showing 0 of 0 products

No products found
Use fewer filters or clear all

Why Buy ICCONS® Adhesive Accessories From Industrial Shed?

Chemical anchoring is easier to organise when the supporting components arrive with the adhesive rather than being sourced after installation has started. Industrial Shed supports builders, concrete contractors, installers, fabricators & maintenance teams selecting compatible ICCONS® nozzles, brushes, sleeves, pumps & injection accessories.

Larger anchor schedules also require enough consumables to complete the planned work. Spare mixer nozzles, serviceable brushes & correctly sized sleeves can prevent a small missing component from interrupting a larger installation.

For help identifying compatible components around an ICCONS® chemical anchoring system, the Industrial Shed Team can assist with practical product & purchasing enquiries.

When qualifying stocked accessories are required around active construction or maintenance schedules, review Same day dispatch for current dispatch arrangements.

Have the Installation Ready Before the Cartridge Is Opened

Once two-part adhesive enters the mixer, preparation should already be complete. Confirm the drilled hole, cleaning equipment, mixer nozzle, dispensing equipment, extensions & substrate-specific sleeves before injection starts.

A well-prepared chemical anchoring setup keeps every required component within the same installation plan. From hole cleaning through to final resin placement, use accessories matched to the ICCONS® adhesive, substrate & fixing being installed.

For further practical reading on selecting complete fastening systems, see Why Good Fasteners Matter More Than the Tool You Drive Them With.

Prepare the complete ICCONS® chemical anchoring setup before injection—correct cleaning equipment, compatible mixing components & application-specific accessories included.

Frequently Asked Questions

Check the specific ICCONS® Chemselect adhesive & cartridge configuration against the compatible mixer nozzle. Similar-looking nozzles should not be assumed interchangeable.

Depending on the specified procedure, preparation can involve a blow pump, correctly sized wire brush, brush extension or compatible SDS Plus brush adaptor.

A piston plug can assist with controlled resin placement in applicable deeper anchor holes. Its use should follow the requirements of the selected adhesive system.

Compatible plastic or mesh sleeves can be used to retain & distribute adhesive around the fixing within suitable hollow substrates. Sleeve, adhesive & fixing dimensions must correspond.

Confirm compatibility between the adhesive, mixer nozzle, extension, embedment depth & installation method before injection begins.

Replace the brush when wear or damage prevents it from providing the required contact with the internal surface of the drilled hole.

Brands

ICCONS®

ICCONS®

Solutions Built for Tradies: How Industrial Shed Powers Your Success

At Industrial Shed, we understand that reliable tools are the backbone of any successful project. That’s why we stock durable, high-performance equipment designed to handle tough jobs without breakdowns or delays. Trade professionals across the Mornington Peninsula and Melbourne trust our range for its dependability and long-lasting quality.

As an independent tool retailer, we take pride in offering only the most trusted brands to ensure you get the job done right the first time. Whether you need hand tools, power tools, or workshop essentials, our carefully curated selection guarantees reliability, so you can focus on your work with confidence.

Struggling to locate specialised tools for your trade? Industrial Shed has you covered. Our extensive range ensures trade professionals across the Mornington Peninsula and Melbourne have access to niche products without the hassle of searching multiple suppliers. From unique fasteners to specialty power tools, we make it simple to find exactly what you need.

As a local, independent tool retailer, we understand the challenges tradies face in sourcing specific equipment. Our team is here to provide expert advice and personalised support, ensuring you have the right tools for the job—every time.

At Industrial Shed, we know the trade industry inside out. As an independent tool shop based on the Mornington Peninsula, we are deeply familiar with the needs of local tradies and construction professionals. Our curated selection of tools is designed to meet the demands of both large-scale projects and everyday trade work.

Our team provides tailored advice and practical solutions to ensure you’re equipped with the right tools and equipment for every job. With years of experience serving Melbourne and Mornington Peninsula professionals, we are your trusted partner for all things trade.

At Industrial Shed, we simplify your workday by offering everything you need under one roof. From hand tools and power tools to fasteners, workwear, and safety gear, our one-stop shop helps trade professionals save valuable time. No more running between multiple suppliers—we have it all.

Serving the Mornington Peninsula and Melbourne regions, we take pride in making your tool shopping experience efficient and straightforward. As an independent retailer, we focus on delivering high-quality products with the service and support you can rely on.

Your safety is our priority at Industrial Shed. We stock a full range of durable workwear, safety equipment, and PPE to keep you and your team protected on-site. From hi-vis clothing to helmets and gloves, our collection is designed with the toughest conditions in mind.

Trade professionals on the Mornington Peninsula and in Melbourne trust us for reliable safety solutions. With expert advice and a commitment to quality, we make sure you have the gear you need to stay safe while getting the job done.

Demanding projects require tools you can trust. At Industrial Shed, our heavy-duty tools and equipment are built to handle the toughest challenges on any worksite. Whether it’s power tools, concrete tools, or lifting gear, we’ve got the equipment you need to perform.

Serving trade professionals across the Mornington Peninsula and Melbourne, we specialise in high-performance tools that stand up to wear and tear. As an independent tool retailer, we provide personalised service to ensure you have the strength and reliability to succeed.

At Industrial Shed, we believe that balancing cost and performance shouldn’t mean compromising on quality. Our range of high-performance tools is competitively priced to ensure Melbourne and Mornington Peninsula tradies stay within budget while using the best gear.

From hand tools to power tools, we stock trusted brands that deliver value and durability. As an independent retailer, we’re committed to providing trade professionals with reliable tools that won’t break the bank—or let you down.

At Industrial Shed, we understand the importance of reliable power on the job. Our range of generators and portable power solutions is designed to keep your tools and equipment running smoothly, no matter where you’re working.

From small repairs to large-scale projects across the Mornington Peninsula and Melbourne, our power solutions are trusted by trade professionals. As your local tool shop, we offer expert advice to ensure you’re equipped with the right tools for uninterrupted productivity.

Avoid costly project delays with Industrial Shed’s consistently stocked inventory. We ensure trade professionals across the Mornington Peninsula and Melbourne have quick access to the tools, fasteners, and supplies they need to get the job done on time.

As an independent retailer, we pride ourselves on being a reliable partner for tradies, offering high-quality products and personalised service. When you shop with us, you’ll never have to worry about supply shortages holding you back.

At Industrial Shed, we’re more than just a tool retailer—we’re your partner in productivity. Serving Melbourne and the Mornington Peninsula, we provide trade professionals with the trusted tools, advice, and support they need to succeed on every project.

Our independent approach ensures we prioritise your needs, from reliable product recommendations to tailored solutions. With our high-quality gear and expert service, you can count on us to help you work smarter and achieve more.