Find the Right Cutter & Replacement Jaws

Cutting electrical cable cleanly depends on more than conductor diameter. Copper, aluminium & steel-reinforced conductors place different demands on cutting jaws, so choosing a tool by size alone can lead to damaged blades, distorted cable ends or a cutter that simply isn't suited to the material.

The HIT Professional cable cutters range at Industrial Shed brings together compact hand cutters, larger long-handle models, a specialist ACSR cutter & replacement jaws. The important distinction is between cutters intended for suitable non-steel cable & the model designed for steel-reinforced conductor.

For compact copper & aluminium cable preparation, compare the HITSC10 160mm Cable Cutter, HITSC20 210mm Cable Cutter & HITSC30 240mm Cable Cutter. For larger non-steel cable, assess the HITSC250R 600mm Cable Cutter. If your conductor has a steel-reinforced core, start with the HITSC250DP 600mm ACSR Cutter instead.

What Are HIT Cable Cutters?

HIT cable cutters are manual cutting tools designed for specific conductor materials & cable sizes. Their cutting edges are shaped to sever compatible cable without relying on an unsuitable general-purpose cutting tool.

Most complete cutters in this collection are intended for non-steel copper & aluminium cable, with certain larger models also listed for suitable lead-covered cable. The HITSC250DP is the specialist exception, intended for compatible aluminium conductor steel-reinforced cable.

This collection contains six complete cutters & two replacement jaw products. The spare jaws are maintenance components, not complete cutting tools.

Compare the HIT Cable Cutter Range

Important: The HITSC500R listing has inconsistent overall-length information. Confirm the manufacturer's measurement before ordering it for a space-restricted application.

Compact HIT Cable Cutters – 160mm, 210mm & 240mm

The HITSC10, HITSC20 & HITSC30 give buyers three compact manual cutter options for suitable copper & aluminium cable.

HITSC10 – 160mm

The smallest listed complete cutter is worth assessing for compatible cable work where portability & restricted access are priorities. Its compact format can be convenient around equipment, provided the handles have enough room to operate.

Choose HITSC10 when the conductor type & dimensions fall within its individual published limits.

HITSC20 – 210mm

The HITSC20 offers a slightly longer manual cutting tool. Its listing identifies shear-cut blades for suitable non-steel cable.

It is a practical model to compare when the HITSC10's size or cutting arrangement does not match the job. The correct choice still depends on the manufacturer's material & diameter ratings.

HITSC30 – 240mm

The HITSC30 provides another compact option with a longer overall format. It is listed for suitable copper & aluminium cable.

Do not assume that a 240mm cutter can sever a particular conductor simply because it is longer than a 160mm model. Compare the actual rated capacity.

Heavy-Duty HIT Cable Cutters

Larger cable may require a tool with longer handles & a cutting mechanism intended for heavier manual work.

HITSC250R – 600mm Cable Cutter

The HITSC250R is a heavy-duty manual cutter with forged alloy steel jaws & shear-cut blades. Its listing identifies suitable copper, aluminium & lead-covered cable applications.

It is a relevant choice to assess when a compact hand cutter is not appropriate for the conductor being prepared.

The term heavy-duty does not establish steel-core compatibility. Confirm the cable construction before use.

HITSC500R – Long-Handle Cable Cutter

The HITSC500R Heavy-Duty Cable Cutter is intended for suitable non-steel cable, including copper, aluminium & lead-covered types identified in its product description.

Its longer-handle arrangement may be relevant when greater manual leverage is required, but the tool also needs sufficient clearance around the work area.

The listing currently contains a discrepancy between its 830mm title & 500mm description. The correct overall length should be confirmed against manufacturer data.

HITSC250DP – Specialist Cutter for ACSR Cable

ACSR means Aluminium Conductor Steel Reinforced. Its steel reinforcement creates a different cutting requirement from ordinary copper or aluminium conductor.

The HITSC250DP is the complete 600mm ACSR cutter listed in this collection. It is the model to assess when the cable contains steel reinforcement & the conductor falls within the tool's stated capacity.

Do not substitute a standard non-steel HIT cable cutter simply because the overall cable diameter appears similar.

For maintenance of the HITSC250DP, the HIT Professional ACSR Cutters collection contains its dedicated replacement blade set.

Find the Correct HIT Cable Cutter Replacement Jaws

Replacing worn jaws may restore cutting performance when the original cutter's frame, handles & moving components remain serviceable.

The important step is matching the replacement component to the correct complete tool.

HITSCC250H – Replacement Jaws for Compatible HITSC250 Models

The HITSCC250H Replacement Jaws are listed as a spare component for compatible HITSC250-series cable cutters.

Because this series includes cutters for different materials, buyers should verify the exact model rather than assume that every HITSC250 cutting head is interchangeable.

HITSCC500H – Replacement Jaws for HITSC500R

The HITSCC500H Replacement Jaws are identified for the HITSC500R.

Choose this component only after confirming the original cutter model & checking that the rest of the mechanism is in suitable condition.

HITSCC250DP – Dedicated ACSR Cutter Blades

The HITSCC250DP ACSR Replacement Blade Set is listed for the HITSC250DP.

It is different from the HITSCC250H replacement jaws. The similar numbering should not be taken as evidence that the parts are interchangeable.

Which HIT Cable Cutter Should You Choose?

A model-specific choice is more reliable than treating all cable cutters as interchangeable.

Copper & Aluminium Cable Versus Steel-Reinforced Cable

A standard non-steel cable cutter is selected for compatible conductor materials. Steel-reinforced cable introduces a harder component that can damage jaws not designed for it.

Likewise, an ACSR cutter is not automatically approved for every type of steel wire rope or armoured cable.

Check the full cable construction, including reinforcement & coverings, before choosing a cutter.

If the material cannot be identified confidently, obtain the cable specification rather than relying on its appearance.

Common Applications for HIT Cable Cutters

Electrical Cable Preparation

Copper & aluminium cable may need cutting before stripping, routing or termination. A suitable cutter can help produce a controlled end for the next stage of preparation.

Inspect the conductor after cutting, particularly where strands may have been distorted or damaged.

Industrial Maintenance

Technicians replacing suitable cable sections need tools matched to the conductor & available working space.

Compact models can be convenient for smaller applications, while longer-handled cutters may suit larger compatible cables.

Workshop Cable Assembly

Repeated cable preparation benefits from a consistent cutting method. Stable workpiece positioning, correct jaw selection & tool condition all influence the finished cut.

Infrastructure Conductor Work

ACSR cable requires specialist equipment & approved work methods. The HITSC250DP is the relevant complete model in this range, subject to its published capacity.

Electrical infrastructure work must be performed only by authorised personnel using appropriate isolation & load-control procedures.

Expert Tips for Cleaner Cable Cuts

Identify the conductor material before cutting. Do not assume a cable is non-steel simply because its outer strands are aluminium.

Keep the workpiece stable & align the cutter correctly. Twisting the handles or forcing the jaws through unsuitable material can damage the tool.

Inspect the finished conductor end before stripping or termination. Excessively flattened cable or damaged strands may indicate an unsuitable cutter or cutting method.

Never cut energised, tensioned or mechanically loaded cable without the required approved procedure. No live-working insulation rating should be assumed for these models.

Cable Cutter Care & Maintenance

Inspect cutting edges for chips, deformation & unusual wear. Remove debris after use & follow the manufacturer's instructions for cleaning, lubrication & storage.

Protect cutting jaws from contact with heavier workshop equipment. Suitable options for arranging tools are available through Tool Storage & Organisation.

When performance deteriorates, inspect the entire mechanism before replacing the jaws. Worn pivots or damaged handles may require attention beyond a new cutting head.