Home ► Hex Bolts

► Hex Bolts

Strong, Accurate Fastening for Machinery & Fabrication Get the right hex bolt the first time & keep your next repair or assembly moving. From machinery maintenance to fabricated steelwork, a correctly specified bolt helps deliver dependable clamping, accurate fitment & consistent performance. The key is matching more than just the...

Strong, Accurate Fastening for Machinery & Fabrication

Get the right hex bolt the first time & keep your next repair or assembly moving. From machinery maintenance to fabricated steelwork, a correctly specified bolt helps deliver dependable clamping, accurate fitment & consistent performance. The key is matching more than just the diameter.

A hex head can look identical across several fastener types, yet thread pitch, length, strength grade & shank design may differ. Industrial Shed's Hex Bolts collection helps Australian tradespeople, fabricators & maintenance teams understand the specifications that matter before ordering.

Choose the Right Hex Bolt

Different jobs call for different bolt specifications. Compare these common options when identifying a replacement or planning a new assembly:

Metric hex bolts: specified by nominal diameter, thread pitch & length for compatible metric assemblies.
High tensile hex bolts: selected where the joint requires a particular property class, such as 8.8 or 10.9.
Partially threaded hex bolts: feature an unthreaded shank section that may be important to the joint's load path.
Fully threaded hex fasteners: offer extended thread engagement where the relevant standard & joint design permit.
Imperial hex bolts: use inch-based thread systems, including UNC or UNF where specified.
Corrosion-resistant finishes: require selection based on environmental exposure, material compatibility & the fastener's mechanical specification.

For other bolt head styles & configurations, browse Bolts. Confirm the individual product dimensions before substituting one design for another.

Hex Bolt Sizes: Diameter, Pitch & Length

Need to replace a missing bolt but only have the original fastener to measure? Start with the nominal thread diameter, thread pitch & length measured from beneath the head.

An M10 × 1.5 × 50 mm bolt, for example, has a nominal 10 mm thread diameter, a 1.5 mm pitch & a 50 mm length. Head dimensions, threaded length & unthreaded shank length should also be checked against the relevant standard.

Buying tip: Measure the complete fastener rather than matching the spanner size alone. The width across flats identifies the head dimension, not necessarily the thread diameter.

Coarse vs Fine Thread Hex Bolts

Thread pitch is one of the easiest details to overlook & one of the most important to get right.

Coarse-thread metric bolts are commonly used for general fastening applications. Their pitch follows the standard coarse-thread series for the nominal diameter.

Fine-thread metric bolts have a smaller pitch for the same nominal diameter. They may be specified where the equipment design requires particular adjustment, engagement or fastening characteristics.

An M10 × 1.5 coarse-thread bolt will not correctly engage an M10 × 1.25 fine-thread nut. Even if the diameter matches, forcing the connection can damage both components.

When replacing an existing fastener, always match the original thread pitch unless the complete joint has been approved for a different specification.

High Tensile Hex Bolts: Grade 8.8 vs 10.9

Strength markings provide a useful starting point when selecting bolts for machinery & industrial equipment. Metric property classes such as 8.8 & 10.9 indicate different specified mechanical strength characteristics.

A Grade 10.9 bolt generally has higher nominal strength than Grade 8.8, but that does not make it a universal upgrade. The correct choice depends on the original design, mating components, tightening procedure & operating conditions.

For critical assemblies, follow the manufacturer's specified bolt property class rather than choosing the highest available grade.

Match Hex Bolts With the Correct Hex Nuts

A well-selected bolt still needs a compatible nut to form the intended connection. Thread diameter & pitch must match exactly, while the nut's property class must be appropriate for the specified joint.

Browse Hex Nut when sourcing matching nuts for replacement bolts or new assemblies. Check the nut's thread designation, material, strength class & applicable standard.

For bearing surfaces beneath bolt heads or nuts, compare Flat Washers. Washer selection should account for hole diameter, outside diameter, material & the intended clamping arrangement.

Partially Threaded vs Fully Threaded Fasteners

Choosing between a partially threaded bolt & a fully threaded fastener can affect how the joint carries load.

A partially threaded hex bolt includes an unthreaded shank that may be specified to pass through the joined components. A fully threaded fastener places threads along more of its length, changing the available grip & thread engagement.

Avoid replacing a partially threaded bolt with a fully threaded alternative solely because the overall length matches. Compare the original drawing, thread length & application requirements.

For additional fastening configurations, explore Bolts & Fasteners.

Materials, Finishes & Corrosion Protection

Outdoor equipment, workshop machinery & fabricated assemblies can experience very different exposure conditions. Zinc-plated steel, galvanised steel, stainless steel & other constructions offer different combinations of corrosion resistance & mechanical performance.

Check the specified finish before ordering. Coating thickness, contact with dissimilar metals & lubrication conditions can influence fitment or tightening behaviour.

Where a manufacturer specifies a torque value, confirm that it applies to the fastener's actual material, coating & lubrication condition.

Safety & Care

Match the nominal diameter, thread pitch, length & head dimensions.
Confirm the required strength grade & fastener standard.
Check threaded length & unthreaded shank configuration.
Inspect mating threads, holes & contact surfaces for damage.
Follow the specified tightening sequence, torque & lubrication requirements.
Replace damaged, stretched or designated single-use fasteners.
Reinspect critical bolted joints according to the equipment maintenance schedule.

Hex Bolts for Australian Trade & Industrial Work

Whether you're replacing machinery fasteners or preparing a fabricated assembly, correct hex bolt selection helps reduce damaged threads, poor fitment & unnecessary repeat work.

Industrial Shed supports Australian maintenance teams, tradespeople & fabricators comparing hex bolt specifications for workshop repairs, machinery servicing & equipment assembly.

Hex Bolts FAQs

How Do I Measure a Hex Bolt Correctly?

Measure the nominal thread diameter, thread pitch & length from beneath the head. Check the head dimensions, threaded length & strength marking against the original specification.

What Is the Difference Between Coarse & Fine Thread Hex Bolts?

Coarse-thread bolts have a larger thread pitch than fine-thread bolts of the same nominal diameter. The two are not interchangeable unless the complete mating connection is changed to suit.

Can I Replace an 8.8 Hex Bolt With a 10.9 Bolt?

Not automatically. Although 10.9 has higher nominal strength, the original joint may require a specific grade, nut combination & tightening procedure. Follow the equipment manufacturer's requirements.

Should I Choose a Fully Threaded or Partially Threaded Hex Bolt?

Use the design specified for the assembly. The unthreaded shank on a partially threaded bolt can be important to fitment & load transfer, so matching overall length alone is insufficient.

Industrial Shed Support

Trying to match a replacement hex bolt? Check the thread pitch, dimensions, property class & finish before ordering. Industrial Shed supports Australian trade & industrial buyers sourcing compatible fastening components.

Review Shipping & Delivery for delivery information. For product identification, replacement enquiries & manufacturer warranty assistance, visit Warranty & Parts Support.

Sidebar

Refined by Clear all

1 results

Clear all

Sort by

Filter

1 results

View as

Items per page

Sort by

Best selling

Featured
Most relevant
Best selling
Alphabetically, A-Z
Alphabetically, Z-A
Price, low to high
Price, high to low
Date, old to new
Date, new to old

Sort

Sort by:

Featured
Most relevant
Best selling
Alphabetically, A-Z
Alphabetically, Z-A
Price, low to high
Price, high to low
Date, old to new
Date, new to old

BBI - 1/4" Hex Power Shank 1/8" - 3/4" - HSS Bar/bolt Outer Reamer | C34500
BBI - 1/4" Hex Power Shank 1/8" - 3/4" - HSS Bar/bolt Outer Reamer | C34500This BBI is a bolt for general fastening.► Key Features Drive: Hex Genuine BBI quality for trade and industrial use ► Trade GuaranteeSupplied by Industrial Shed — genuine BBI...

$282.70

$282.70

Unit price

per

Brands

AIP

Alco

Austlift

Bare-Co

BBI

Bremick

Champion

Excision

Fluiconnecto

Hobsons

ICCONS®

Macsim

Otter

Securefix

Torres

► Hex Bolts

Strong, Accurate Fastening for Machinery & Fabrication

Choose the Right Hex Bolt

Different jobs call for different bolt specifications. Compare these common options when identifying a replacement or planning a new assembly:

Metric hex bolts: specified by nominal diameter, thread pitch & length for compatible metric assemblies.
High tensile hex bolts: selected where the joint requires a particular property class, such as 8.8 or 10.9.
Partially threaded hex bolts: feature an unthreaded shank section that may be important to the joint's load path.
Fully threaded hex fasteners: offer extended thread engagement where the relevant standard & joint design permit.
Imperial hex bolts: use inch-based thread systems, including UNC or UNF where specified.
Corrosion-resistant finishes: require selection based on environmental exposure, material compatibility & the fastener's mechanical specification.

For other bolt head styles & configurations, browse Bolts. Confirm the individual product dimensions before substituting one design for another.

Hex Bolt Sizes: Diameter, Pitch & Length

Need to replace a missing bolt but only have the original fastener to measure? Start with the nominal thread diameter, thread pitch & length measured from beneath the head.

Buying tip: Measure the complete fastener rather than matching the spanner size alone. The width across flats identifies the head dimension, not necessarily the thread diameter.

Coarse vs Fine Thread Hex Bolts

Thread pitch is one of the easiest details to overlook & one of the most important to get right.

Coarse-thread metric bolts are commonly used for general fastening applications. Their pitch follows the standard coarse-thread series for the nominal diameter.

Fine-thread metric bolts have a smaller pitch for the same nominal diameter. They may be specified where the equipment design requires particular adjustment, engagement or fastening characteristics.

An M10 × 1.5 coarse-thread bolt will not correctly engage an M10 × 1.25 fine-thread nut. Even if the diameter matches, forcing the connection can damage both components.

When replacing an existing fastener, always match the original thread pitch unless the complete joint has been approved for a different specification.

High Tensile Hex Bolts: Grade 8.8 vs 10.9

For critical assemblies, follow the manufacturer's specified bolt property class rather than choosing the highest available grade.

Match Hex Bolts With the Correct Hex Nuts

Browse Hex Nut when sourcing matching nuts for replacement bolts or new assemblies. Check the nut's thread designation, material, strength class & applicable standard.

For bearing surfaces beneath bolt heads or nuts, compare Flat Washers. Washer selection should account for hole diameter, outside diameter, material & the intended clamping arrangement.

Partially Threaded vs Fully Threaded Fasteners

Choosing between a partially threaded bolt & a fully threaded fastener can affect how the joint carries load.

Avoid replacing a partially threaded bolt with a fully threaded alternative solely because the overall length matches. Compare the original drawing, thread length & application requirements.

For additional fastening configurations, explore Bolts & Fasteners.

Materials, Finishes & Corrosion Protection

Check the specified finish before ordering. Coating thickness, contact with dissimilar metals & lubrication conditions can influence fitment or tightening behaviour.

Where a manufacturer specifies a torque value, confirm that it applies to the fastener's actual material, coating & lubrication condition.

Safety & Care

Match the nominal diameter, thread pitch, length & head dimensions.
Confirm the required strength grade & fastener standard.
Check threaded length & unthreaded shank configuration.
Inspect mating threads, holes & contact surfaces for damage.
Follow the specified tightening sequence, torque & lubrication requirements.
Replace damaged, stretched or designated single-use fasteners.
Reinspect critical bolted joints according to the equipment maintenance schedule.

Hex Bolts for Australian Trade & Industrial Work

Whether you're replacing machinery fasteners or preparing a fabricated assembly, correct hex bolt selection helps reduce damaged threads, poor fitment & unnecessary repeat work.

Industrial Shed supports Australian maintenance teams, tradespeople & fabricators comparing hex bolt specifications for workshop repairs, machinery servicing & equipment assembly.

Hex Bolts FAQs

How Do I Measure a Hex Bolt Correctly?

Measure the nominal thread diameter, thread pitch & length from beneath the head. Check the head dimensions, threaded length & strength marking against the original specification.

What Is the Difference Between Coarse & Fine Thread Hex Bolts?

Coarse-thread bolts have a larger thread pitch than fine-thread bolts of the same nominal diameter. The two are not interchangeable unless the complete mating connection is changed to suit.

Can I Replace an 8.8 Hex Bolt With a 10.9 Bolt?

Should I Choose a Fully Threaded or Partially Threaded Hex Bolt?

Use the design specified for the assembly. The unthreaded shank on a partially threaded bolt can be important to fitment & load transfer, so matching overall length alone is insufficient.

Industrial Shed Support

Review Shipping & Delivery for delivery information. For product identification, replacement enquiries & manufacturer warranty assistance, visit Warranty & Parts Support.

Limited Time Offers

► Hex Bolts

Refined by Clear all

Sort by:

Brands

► Hex Bolts

Shop the look

Choose options

Edit option

Back In Stock Notification

Choose options

Limited Time Offers