► Hardie Hose | Pneumatic Tubes

Reliable Air Routing For Pneumatic Systems Every pneumatic circuit depends on a clear & dependable path for compressed air. Hardie Hose Pneumatic Tubes provide practical air-line routing for compatible machinery, control systems, workshop equipment & industrial pneumatic installations. From compact control panels to longer machine runs, the correct tube needs...

Reliable Air Routing For Pneumatic Systems

Every pneumatic circuit depends on a clear & dependable path for compressed air. Hardie Hose Pneumatic Tubes provide practical air-line routing for compatible machinery, control systems, workshop equipment & industrial pneumatic installations.

From compact control panels to longer machine runs, the correct tube needs to suit more than the connection alone. Outside diameter, material, working pressure, operating temperature, bend requirements & fitting compatibility should all be checked against the individual product & equipment specifications.

Completing a pneumatic installation? Air Tools & Compressors brings together related equipment for compressed-air applications.

Start With The Connection, Not The Colour

Two tubes can look almost identical on the bench yet require completely different fittings. Accurate sizing matters particularly where pneumatic tubing connects directly into compact fittings, valves or other control components.

Before cutting a new line, check:

► Tube outside diameter
► Tube inside diameter where relevant
► Compatible fitting dimensions
► Tube material
► Required working pressure
► Operating temperature
► Bend requirements
► Exposure to oils, chemicals, abrasion or movement
► Equipment specifications

Where compatible push-in connections are required, the tube dimensions need to correspond with the fitting specification rather than simply appearing close enough.

Different Tube Materials Suit Different Jobs

A fixed line inside a protected control cabinet faces very different conditions from tubing routed through moving machinery. Material selection should therefore reflect how & where the line will operate.

Nylon, polyurethane & polyethylene pneumatic tubing can have different characteristics depending on the particular product specification.

Installation Factor

What To Consider

Flexibility

How the tube needs to route around equipment

Movement

Whether the line stays fixed or moves repeatedly

Pressure

Required working-pressure range

Temperature

Conditions surrounding the installation

Abrasion

Contact with frames, guards or machinery

Chemical exposure

Oils, cleaners or other substances nearby

Connection

Dimensions required by compatible fittings

Identification

Whether colour coding is useful within the circuit

Material alone doesn't confirm suitability. Check the specification of the individual pneumatic tube against the operating conditions before installation.

Where Pneumatic Tubing Fits Into The Air Circuit?

Follow the compressed air from source to actuator & the role of the tubing becomes clear.

Compressor → air treatment → regulation → tubing → valve → actuator → exhaust

Pneumatic tubing can provide connections between compatible components used across:

► Automated machinery
► Pneumatic control panels
► Valve manifolds
► Air cylinders
► Actuator circuits
► Manufacturing equipment
► Workshop machinery
► Air-operated controls
► Machine-building applications

For the supply side of a compressed-air installation, Air Compressors provide the starting point for compatible pneumatic systems.

Why A Clean Tube Cut Matters?

Before blaming a leaking fitting, take a close look at the end of the tube. A rough, angled, crushed or damaged end can interfere with connections that depend on correctly prepared tubing.

Where the fitting manufacturer specifies a clean square cut, prepare the tube accordingly rather than trying to overcome poor preparation with additional force.

A careful installation starts with:

► Confirming the required tube size
► Checking the line for visible damage
► Preparing the end according to specification
► Avoiding crushing or deformation
► Inserting the tube correctly
► Checking the finished connection
► Testing the system according to the equipment procedure

Forcing an incorrect combination together won't turn it into a compatible connection.

Pneumatic Tube Vs Air Hose

Need to decide between compact pneumatic tubing & a conventional flexible air hose? The intended location within the compressed-air system provides a useful starting point.

Pneumatic Tube

Air Hose

Common around machinery & controls

Common across workshop air delivery

Often paired with compact pneumatic fittings

Often paired with plugs & couplers

Useful for organised machine routing

Useful where flexible reach is required

Available in different materials & dimensions

Available in different hose constructions

Well suited to compact pneumatic circuits where specified

Well suited to flexible workshop runs where specified

Neither format is automatically preferable. Pressure, movement, environment, connection method & equipment requirements determine what belongs in the application.

For flexible compressed-air delivery around work areas, explore Air Hoses & Reels.

Colour Coding Can Make Complex Circuits Easier To Trace

Open a control cabinet containing several identical air lines & tracing one circuit can quickly become frustrating. Where different tube colours are available, consistent colour coding can help distinguish lines during installation, servicing & fault-finding.

A documented identification system can be particularly useful around valve manifolds, automated machinery & equipment containing several pneumatic circuits.

Colour shouldn't be treated as proof of a tube's pressure rating, material or function. Always verify the actual product specification before servicing or replacing a line.

Give Every Bend Enough Room

A tidy installation shouldn't require folding pneumatic tubing around an impossibly tight corner. Excessively sharp bends, crushing or poor routing can affect the condition of an air line.

Pay particular attention around:

► Control-cabinet entries
► Moving actuators
► Sharp edges
► Hinged panels
► Cable bundles
► Hot surfaces
► Repeated contact points
► Frequently serviced areas

Follow the tube manufacturer's bend requirements & provide appropriate clearance from moving machinery or surfaces that could damage the line.

Pressure Control Starts Before The Tube

Tubing carries the air, but it doesn't regulate the system feeding it. Where controlled supply pressure forms part of the pneumatic setup, Pressure Regulators & Gauges provide equipment for monitoring & regulating compatible compressed-air applications.

Moisture & contamination also deserve attention upstream. Air Filters & Moisture Traps cover air-treatment components used where compatible filtration or moisture management is required.

Looking at the complete air path can reveal problems that would otherwise be incorrectly blamed on the tubing.

Workshop Tip: Mark The Lines Before Pulling Them Apart

A cluster of identical tubes is much easier to understand before everything has been disconnected. When servicing a multi-line pneumatic assembly, record the original connection positions before removing tubing where appropriate.

Equipment documentation, approved identification labels or clear reference photographs can make reassembly considerably easier.

This becomes particularly useful where several lines share the same diameter & colour.

Once disconnected, inspect the section of tube around each connection. Scoring, crushing, abrasion or deformation near the end may warrant further attention before reconnection.

Hearing A Leak? Work Through The Connection

A hiss tells you air is escaping somewhere; it doesn't tell you why. Instead of repeatedly pushing or tightening components, inspect the connection systematically.

Check:

► Tube dimensions
► Tube-end condition
► Correct insertion
► Fitting compatibility
► Fitting condition
► Damage near the connection
► Side loading or pulling on the tube
► Routing around surrounding machinery

Isolate & depressurise pneumatic equipment before servicing. Follow the applicable component & equipment procedures when checking or replacing a connection.

Recurring leakage deserves a cause, not another temporary adjustment.

When The Actuator Slows Down, Follow The Air?

The component nearest the symptom isn't necessarily the component causing it. A change in actuator speed or machine response can justify checking the entire pneumatic path.

Start upstream & move through the circuit:

Compressor → filtration → regulator → tubing → fitting → valve → actuator → exhaust

A supply issue, pressure setting, leak, damaged line, restriction, valve problem or exhaust condition can influence downstream performance.

At the discharge end of compatible pneumatic circuits, Hardie Hose Silencer Cones provide components for managing pneumatic exhaust.

Connections That Need To Come Apart Regularly

Not every compressed-air connection is intended to remain permanently assembled. Workshop systems may also require removable connections between air supplies, hoses & equipment.

Quick Couplers & Connectors cover connection options for compatible compressed-air applications where convenient connection & disconnection is required.

Keeping each connection type appropriate to its position in the system helps create an air path that's easier to inspect, service & maintain.

Worth Reading: The Wider Workshop Air-System Picture

Compressed air has operating considerations that extend well beyond the tubing itself. Air Tools vs Electric: The Real Cost of Ownership for Australian Workshops explores pneumatic & electric equipment from a broader Australian workshop perspective.

Rather than filling this section with loosely connected articles, additional workshop reading should only be added when it directly supports pneumatic systems, compressed-air maintenance or the application covered here.

Before Repressurising The Circuit

The final inspection is easiest while the system is still safely isolated. Look over the complete tube run before returning the equipment to operation.

► Confirm the correct tubing has been installed
► Inspect each connection
► Check tube routing
► Look for pinching, crushing or excessive bending
► Confirm clearance from moving components
► Check identification where used
► Reinstate covers or guards where required
► Follow the correct repressurisation procedure
► Inspect for leakage
► Confirm normal equipment operation

An unexpected change after installation should be investigated rather than hidden with unrelated pressure adjustments.

Industrial Shed Support For Pneumatic Installations

A reliable pneumatic circuit comes from getting each connection right from the compressor through to the exhaust. Industrial Shed supplies Hardie Hose pneumatic components alongside compressed-air equipment & workshop products for Australian maintenance, machinery & industrial applications.

Need parts moving without unnecessary delay? Review Same day dispatch for Industrial Shed shipping & delivery information.

For ongoing workshop requirements, on -site & workshop Services covers support for keeping regularly used equipment & supplies available.

Build The Air Line Around The Actual Application

Measure first, route carefully & give every connection the attention it deserves.

✔ Confirm the required tube dimensions
✔ Match the tubing to compatible fittings
✔ Check pressure & temperature requirements
✔ Select material for the operating environment
✔ Allow appropriate bend radius & clearance
✔ Protect the line from abrasion & movement
✔ Inspect connections before repressurising
✔ Follow product & equipment specifications

Set up the Hardie Hose pneumatic line correctly from the first cut & keep compressed a

Frequently Asked Questions

Which measurement matters when matching pneumatic tube to a fitting?

The required measurement depends on the fitting system. Many pneumatic fittings are specified around tube outside diameter, so check the fitting & tube specifications before making the connection.

Why are pneumatic tubes available in different materials?

Different materials can provide different characteristics for flexibility, routing, operating conditions & environmental exposure. Suitability depends on the specification of the individual tube.

Can different coloured pneumatic tubes be used to identify circuits?

Colour coding can provide a practical identification method where several pneumatic lines run through the same equipment. Colour alone shouldn't be used to determine pressure rating, material or compatibility.

What should I check if a pneumatic tube connection leaks?

Inspect the tube size, end preparation, insertion, fitting condition, compatibility, nearby damage & any force pulling the tube sideways. Depressurise the equipment before servicing the connection.

Why does pneumatic tubing kink?

Kinking can occur when tubing is routed more tightly than its permitted bend requirements or is crushed by surrounding components. Check the tube specification & revise the route where necessary.

Can damaged pneumatic tube be reconnected?

That depends on the location & extent of the damage plus the product requirements. Cuts, abrasion, crushing, deformation or deterioration should be assessed before the line returns to service.

Brands

► Hardie Hose | Pneumatic Tubes

Reliable Air Routing For Pneumatic Systems

Every pneumatic circuit depends on a clear & dependable path for compressed air. Hardie Hose Pneumatic Tubes provide practical air-line routing for compatible machinery, control systems, workshop equipment & industrial pneumatic installations.

From compact control panels to longer machine runs, the correct tube needs to suit more than the connection alone. Outside diameter, material, working pressure, operating temperature, bend requirements & fitting compatibility should all be checked against the individual product & equipment specifications.

Completing a pneumatic installation? Air Tools & Compressors brings together related equipment for compressed-air applications.

Start With The Connection, Not The Colour

Two tubes can look almost identical on the bench yet require completely different fittings. Accurate sizing matters particularly where pneumatic tubing connects directly into compact fittings, valves or other control components.

Before cutting a new line, check:

► Tube outside diameter
► Tube inside diameter where relevant
► Compatible fitting dimensions
► Tube material
► Required working pressure
► Operating temperature
► Bend requirements
► Exposure to oils, chemicals, abrasion or movement
► Equipment specifications

Where compatible push-in connections are required, the tube dimensions need to correspond with the fitting specification rather than simply appearing close enough.

Different Tube Materials Suit Different Jobs

A fixed line inside a protected control cabinet faces very different conditions from tubing routed through moving machinery. Material selection should therefore reflect how & where the line will operate.

Nylon, polyurethane & polyethylene pneumatic tubing can have different characteristics depending on the particular product specification.

Installation Factor

What To Consider

Flexibility

How the tube needs to route around equipment

Movement

Whether the line stays fixed or moves repeatedly

Pressure

Required working-pressure range

Temperature

Conditions surrounding the installation

Abrasion

Contact with frames, guards or machinery

Chemical exposure

Oils, cleaners or other substances nearby

Connection

Dimensions required by compatible fittings

Identification

Whether colour coding is useful within the circuit

Material alone doesn't confirm suitability. Check the specification of the individual pneumatic tube against the operating conditions before installation.

Where Pneumatic Tubing Fits Into The Air Circuit?

Follow the compressed air from source to actuator & the role of the tubing becomes clear.

Compressor → air treatment → regulation → tubing → valve → actuator → exhaust

Pneumatic tubing can provide connections between compatible components used across:

► Automated machinery
► Pneumatic control panels
► Valve manifolds
► Air cylinders
► Actuator circuits
► Manufacturing equipment
► Workshop machinery
► Air-operated controls
► Machine-building applications

For the supply side of a compressed-air installation, Air Compressors provide the starting point for compatible pneumatic systems.

Why A Clean Tube Cut Matters?

Before blaming a leaking fitting, take a close look at the end of the tube. A rough, angled, crushed or damaged end can interfere with connections that depend on correctly prepared tubing.

Where the fitting manufacturer specifies a clean square cut, prepare the tube accordingly rather than trying to overcome poor preparation with additional force.

A careful installation starts with:

► Confirming the required tube size
► Checking the line for visible damage
► Preparing the end according to specification
► Avoiding crushing or deformation
► Inserting the tube correctly
► Checking the finished connection
► Testing the system according to the equipment procedure

Forcing an incorrect combination together won't turn it into a compatible connection.

Pneumatic Tube Vs Air Hose

Need to decide between compact pneumatic tubing & a conventional flexible air hose? The intended location within the compressed-air system provides a useful starting point.

Pneumatic Tube

Air Hose

Common around machinery & controls

Common across workshop air delivery

Often paired with compact pneumatic fittings

Often paired with plugs & couplers

Useful for organised machine routing

Useful where flexible reach is required

Available in different materials & dimensions

Available in different hose constructions

Well suited to compact pneumatic circuits where specified

Well suited to flexible workshop runs where specified

Neither format is automatically preferable. Pressure, movement, environment, connection method & equipment requirements determine what belongs in the application.

For flexible compressed-air delivery around work areas, explore Air Hoses & Reels.

Colour Coding Can Make Complex Circuits Easier To Trace

Open a control cabinet containing several identical air lines & tracing one circuit can quickly become frustrating. Where different tube colours are available, consistent colour coding can help distinguish lines during installation, servicing & fault-finding.

A documented identification system can be particularly useful around valve manifolds, automated machinery & equipment containing several pneumatic circuits.

Colour shouldn't be treated as proof of a tube's pressure rating, material or function. Always verify the actual product specification before servicing or replacing a line.

Give Every Bend Enough Room

A tidy installation shouldn't require folding pneumatic tubing around an impossibly tight corner. Excessively sharp bends, crushing or poor routing can affect the condition of an air line.

Pay particular attention around:

► Control-cabinet entries
► Moving actuators
► Sharp edges
► Hinged panels
► Cable bundles
► Hot surfaces
► Repeated contact points
► Frequently serviced areas

Follow the tube manufacturer's bend requirements & provide appropriate clearance from moving machinery or surfaces that could damage the line.

Pressure Control Starts Before The Tube

Tubing carries the air, but it doesn't regulate the system feeding it. Where controlled supply pressure forms part of the pneumatic setup, Pressure Regulators & Gauges provide equipment for monitoring & regulating compatible compressed-air applications.

Moisture & contamination also deserve attention upstream. Air Filters & Moisture Traps cover air-treatment components used where compatible filtration or moisture management is required.

Looking at the complete air path can reveal problems that would otherwise be incorrectly blamed on the tubing.

Workshop Tip: Mark The Lines Before Pulling Them Apart

A cluster of identical tubes is much easier to understand before everything has been disconnected. When servicing a multi-line pneumatic assembly, record the original connection positions before removing tubing where appropriate.

Equipment documentation, approved identification labels or clear reference photographs can make reassembly considerably easier.

This becomes particularly useful where several lines share the same diameter & colour.

Once disconnected, inspect the section of tube around each connection. Scoring, crushing, abrasion or deformation near the end may warrant further attention before reconnection.

Hearing A Leak? Work Through The Connection

A hiss tells you air is escaping somewhere; it doesn't tell you why. Instead of repeatedly pushing or tightening components, inspect the connection systematically.

Check:

► Tube dimensions
► Tube-end condition
► Correct insertion
► Fitting compatibility
► Fitting condition
► Damage near the connection
► Side loading or pulling on the tube
► Routing around surrounding machinery

Isolate & depressurise pneumatic equipment before servicing. Follow the applicable component & equipment procedures when checking or replacing a connection.

Recurring leakage deserves a cause, not another temporary adjustment.

When The Actuator Slows Down, Follow The Air?

The component nearest the symptom isn't necessarily the component causing it. A change in actuator speed or machine response can justify checking the entire pneumatic path.

Start upstream & move through the circuit:

Compressor → filtration → regulator → tubing → fitting → valve → actuator → exhaust

A supply issue, pressure setting, leak, damaged line, restriction, valve problem or exhaust condition can influence downstream performance.

At the discharge end of compatible pneumatic circuits, Hardie Hose Silencer Cones provide components for managing pneumatic exhaust.

Connections That Need To Come Apart Regularly

Not every compressed-air connection is intended to remain permanently assembled. Workshop systems may also require removable connections between air supplies, hoses & equipment.

Quick Couplers & Connectors cover connection options for compatible compressed-air applications where convenient connection & disconnection is required.

Keeping each connection type appropriate to its position in the system helps create an air path that's easier to inspect, service & maintain.

Worth Reading: The Wider Workshop Air-System Picture

Compressed air has operating considerations that extend well beyond the tubing itself. Air Tools vs Electric: The Real Cost of Ownership for Australian Workshops explores pneumatic & electric equipment from a broader Australian workshop perspective.

Rather than filling this section with loosely connected articles, additional workshop reading should only be added when it directly supports pneumatic systems, compressed-air maintenance or the application covered here.

Before Repressurising The Circuit

The final inspection is easiest while the system is still safely isolated. Look over the complete tube run before returning the equipment to operation.

► Confirm the correct tubing has been installed
► Inspect each connection
► Check tube routing
► Look for pinching, crushing or excessive bending
► Confirm clearance from moving components
► Check identification where used
► Reinstate covers or guards where required
► Follow the correct repressurisation procedure
► Inspect for leakage
► Confirm normal equipment operation

An unexpected change after installation should be investigated rather than hidden with unrelated pressure adjustments.