Correct-Fit Back Nuts & M22 Connections for Trade Repairs
A missing or mismatched nut can leave an otherwise finished hose repair sitting on the workshop bench. Hardie Hose Nuts include galvanised back nuts from 15 mm to 100 mm plus M22 x 1.5 pressure-washer connections with 3/8" BSP male, 3/8" BSP female & 3/8" NPT male configurations.
For fitters, pressure-washer technicians & maintenance workshops, choosing the right component comes down to four practical checks: size, thread standard, male/female configuration & the fitting it needs to mate with.
► Galvanised back nuts from 15 mm to 100 mm
► M22 x 1.5 pressure-washer connections
► 3/8" BSP male & female configurations
► 3/8" NPT male configuration
► Hardie Hose part references for repeat identification
► Components for hose, pressure-cleaning & equipment repairs
Still have the old nut? Keep it on the bench until the replacement has been confirmed. A physical reference can prevent a similar-looking fitting from becoming the wrong part.
Working on more than the nut? Explore Hardie Hose | Hose & Fittings for related hose & connection components.
What Are Hardie Hose Nuts?
Two different connection jobs sit within this collection. Hardie Hose offers galvanised back nuts for compatible fitting arrangements alongside specialised M22 x 1.5 components used with compatible pressure-washer connections.
Galvanised Back Nuts
|
Size
|
Hardie Hose Part #
|
|
15 mm
|
GF-BN015
|
|
20 mm
|
GF-BN020
|
|
25 mm
|
GF-BN025
|
|
32 mm
|
GF-BN032
|
|
40 mm
|
GF-BN040
|
|
50 mm
|
GF-BN050
|
|
65 mm
|
GF-BN065
|
|
80 mm
|
GF-BN080
|
|
100 mm
|
GF-BN100
|
M22 Pressure-Washer Connections
|
Connection
|
Hardie Hose Part #
|
|
M22 x 1.5 → 3/8" BSP Male
|
HFA-PW-M2206M
|
|
M22 x 1.5 → 3/8" BSP Female
|
HFA-PW-M2206F
|
|
M22 x 1.5 → 3/8" NPT Male
|
HFA-PW-M22-06M-NPT
|
Those two product groups shouldn't be selected the same way. A technician replacing a 50 mm back nut needs to establish the nominal size & mating component while a pressure-washer repair may require careful identification of M22, BSP or NPT threads.
Why Choose Hardie Hose Nuts?
Threaded fittings don't leave much room for “near enough”. Components can look almost identical on the parts bench while using a different size, thread form or connection arrangement.
For galvanised back nuts, begin with the required nominal size:
15 → 20 → 25 → 32 → 40 → 50 → 65 → 80 → 100 mm
For an M22 pressure-washer connection, check:
► Is the connection M22 x 1.5?
► Is the opposite connection 3/8" BSP or 3/8" NPT?
► Does the assembly require a male or female end?
► Are the mating threads undamaged?
► Does the fitting match the equipment being repaired?
Once a component has been positively identified, record its Hardie Hose part number against regularly serviced equipment. That can make the next repair considerably quicker.
Common Applications
Pressure-Washer Connection Repairs
A damaged connection can take an otherwise serviceable pressure washer out of action. The M22 products in this range provide specific BSP & NPT configurations for compatible pressure-cleaning equipment.
When the high-pressure line also needs replacing, browse Hardie Hose | Pressure Washer Hoses.
Hose & Fitting Assemblies
Galvanised back nuts can form part of compatible fitting arrangements where the nominal size & adjoining components are correctly matched.
Workshop Equipment Maintenance
Known part numbers can save time when the same equipment returns to the workshop. Keeping frequently used references against an asset or machine reduces repeated measuring & identification.
Machinery Repairs
A damaged, missing or distorted fitting can hold up a plant repair even when the larger hose & equipment components remain usable.
Pressure-Cleaning Equipment Servicing
Technicians working between the pressure washer, high-pressure hose & gun can encounter M22 connections where both sides of the fitting need to be identified correctly.
Fleet & Equipment Maintenance
Repeated servicing becomes simpler when commonly replaced nuts & fittings are documented against the machines that use them.
For workshops preparing equipment before heavier workloads, Spring Jobsite Prep – Getting Your Gear Ready provides further maintenance ideas.
Product Selection Guide
Start with what the nut has to connect to. That single check can eliminate most of the wrong options before a spanner comes anywhere near the fitting.
Choosing a Galvanised Back Nut
Confirm the nominal size first.
For example, if the assembly requires a 50 mm back nut, the corresponding product in this range is GF-BN050.
Before ordering, establish:
► Required nominal size
► Mating component
► Existing fitting arrangement
► Condition of adjoining threads
► Hardie Hose reference where known
Don't move to a nearby size simply because an old component is difficult to measure. Check the adjoining fitting or known equipment information wherever possible.
Choosing an M22 Pressure-Washer Nut
M22 identifies only part of the connection. The opposite side still needs to be matched.
M22 x 1.5 + 3/8" BSP male
→ HFA-PW-M2206M
M22 x 1.5 + 3/8" BSP female
→ HFA-PW-M2206F
M22 x 1.5 + 3/8" NPT male
→ HFA-PW-M22-06M-NPT
The practical lesson is simple: don't order from “M22” or “3/8 inch” alone.
BSP vs NPT – Check Before You Tighten
Seeing 3/8" on both fittings doesn't make them interchangeable. This collection contains both 3/8" BSP & 3/8" NPT M22 connections.
BSP & NPT are different thread systems.
Before fitting a replacement:
► Read markings on the original component
► Check equipment information where available
► Identify BSP or NPT
► Confirm male or female configuration
► Inspect the mating thread
► Begin the connection carefully by hand
If the fitting doesn't begin engaging as expected, stop & confirm the parts.
More leverage won't turn an incorrect thread into the correct one.
Where another thread transition is required elsewhere in the repair, browse Hardie Hose | Adaptors.
Expert Tips
Keep the Removed Nut Until the Repair Is Complete
The old component may be worn but it's still useful evidence. Compare it with the replacement before installation & keep it nearby until the equipment is operating correctly.
Photograph the Connection Before Dismantling
A clear photo can preserve fitting orientation, hose routing & the relationship between components.
Start Threads by Hand
A correctly matched threaded component should begin engaging without excessive force.
If it binds immediately, investigate before reaching for a spanner.
Inspect Both Sides
A new fitting can't repair a damaged mating thread.
Look for:
► Cross-threading
► Flattened threads
► Corrosion
► Contamination
► Distortion
► Previous tool damage
Separate BSP & NPT Parts in Storage
Workshops carrying both thread systems can reduce mix-ups by storing & identifying them separately.
Record the Exact Part Number
“Pressure-washer nut” isn't much help during the next breakdown.
HFA-PW-M2206F provides a far better starting point.
Maintenance teams working around hard-used machinery may also find Quarry Crews & Crusher Maintenance useful for broader equipment-maintenance planning.
When a New Nut Doesn't Stop the Leak?
Replacing the visible component doesn't always remove the cause of the problem.
Imagine an M22 pressure-washer connection still leaking after a new nut has been installed.
Before tightening harder, check:
► Is the correct BSP or NPT connection fitted?
► Are the mating threads damaged?
► Is the male/female configuration correct?
► Is the sealing surface in good condition?
► Does the connection require a separate seal or washer?
► Is hose movement loading the fitting sideways?
► Is another part of the assembly damaged?
Depending on the connection, the nut itself may not provide the sealing interface.
Where a compatible assembly requires a separate sealing component, browse Hardie Hose | Washers.
Three Parts-Bench Problems Worth Catching Early
“Both Fittings Say 3/8"”
That's only part of the identification. One may be BSP while the other is NPT.
Check the thread system before attempting assembly.
“The Nut Goes on One Turn Then Stops”
Don't force it.
Binding can indicate an incorrect thread, cross-threading, contamination or damage.
“The Replacement Fits but the Connection Still Leaks”
Look beyond the new component.
Inspect the mating fitting, sealing arrangement & hose movement before assuming more tightening is required.
A minute spent checking the complete connection can prevent damaged threads & another strip-down.
Follow the Connection Through the Equipment
Sometimes the easiest way to identify a fitting is to stop looking at the fitting by itself.
Trace what connects before & after it.
A pressure-cleaning setup might run:
Pressure washer → M22 connection → high-pressure hose → fitting → gun
A different hose arrangement might involve:
Equipment → fitting → hose tail → hose
Where a compatible hose-side connection is required, Hardie Hose | Hose Tails provides related fitting options.
For suitable systems using detachable connections elsewhere in the line, Quick Couplers & Connectors covers another useful connection family.
The question becomes more useful when it changes from “Does this nut fit?” to “Does every component in this connection match the next one?”
Make Repeat Repairs Quicker
The second time a machine comes into the workshop shouldn't require solving the same parts puzzle again.
Record:
|
Detail
|
Information to Keep
|
|
Equipment
|
Make, model or asset number
|
|
Component
|
Back nut or M22 connection
|
|
Hardie Hose Part #
|
Exact reference
|
|
Nominal Size
|
Where applicable
|
|
Thread
|
BSP, NPT or specified connection
|
|
Configuration
|
Male or female
|
|
Mating Component
|
Adjoining fitting
|
|
Replacement Date
|
Maintenance history
|
For businesses regularly maintaining hose & pressure-cleaning equipment, Trade Support Solutions can assist with recurring trade supply requirements.