► Hardie Hose | Hose Ferrules

Match the Right Ferrule to Every Hose Assembly A ferrule might be small, but selecting the wrong one can stop a hose assembly before it reaches the machine. Hardie Hose Hose Ferrules provide dedicated steel ferrule options for corresponding R7 hose, 1 & 2 wire hydraulic hose & True Bore...

Match the Right Ferrule to Every Hose Assembly

A ferrule might be small, but selecting the wrong one can stop a hose assembly before it reaches the machine. Hardie Hose Hose Ferrules provide dedicated steel ferrule options for corresponding R7 hose, 1 & 2 wire hydraulic hose & True Bore Teflon hose, giving hose workshops, repairers & maintenance teams clearly identified components for professional assembly work.

Start with the hose construction rather than whichever ferrule looks closest on the bench. The range is divided into HFF-R7, HFF-SN3 & HFF-ST ferrule series, with sizes from 3/16" through to 1" depending on the hose family.

► HFF-R7 steel ferrules for corresponding R7 hose
► HFF-SN3 steel ferrules for corresponding 1 & 2 wire hose
► HFF-ST steel ferrules for corresponding True Bore Teflon hose
► Sizes covering common hose workshop requirements
► Individual part numbers for easier identification & reordering
► Suitable for professional hose assembly work

Building the complete hydraulic line? Browse Hardie Hose | Hydraulic Hoses for corresponding hose options.

What Are Hardie Hose Hose Ferrules?

Think of the ferrule as one part of the complete hose-end connection rather than a standalone steel sleeve. During the specified crimping process, the ferrule works with the corresponding hose & fitting to form the finished assembly.

The important workshop distinction is straightforward: ferrules carrying the same nominal size can belong to different hose systems.

Hardie Hose separates the collection into three main groups:

Ferrule Series

Corresponding Hose

HFF-R7

R7 hose

HFF-SN3

1 & 2 wire hose

HFF-ST

True Bore Teflon hose

That distinction matters before the crimper is switched on. Identify the hose family first then confirm its size & corresponding ferrule.

Need other components around the hose end? Explore Hose Fittings.

Why Choose Hardie Hose Hose Ferrules?

Busy hose benches work better when components can be identified without guesswork. Hardie Hose separates R7, wire-reinforced & True Bore Teflon ferrules into clearly defined series, helping technicians organise parts around the hose actually being assembled.

Dedicated Ferrule Families

R7 hose uses the HFF-R7 range, corresponding 1 & 2 wire hose uses HFF-SN3 & True Bore Teflon hose uses HFF-ST.

Practical Sizes With Clear Part Identification

Different hose jobs arrive with different bore requirements, so both series & size matter at the parts bench. Across the collection, ferrules extend from 3/16" through to 1" depending on family, with codes such as HFF-R7-06, HFF-SN3-08 & HFF-ST-12 providing precise references for storage & replenishment.

Easier Repeat Ordering

“We need more half-inch ferrules” leaves an important question unanswered. Recording the complete HFF code tells purchasing staff which series & size actually needs replacing.

Common Applications

Hydraulic Hose Repair Benches

When a damaged hydraulic assembly arrives in the workshop, identifying the hose construction comes before choosing the ferrule. Corresponding ferrules can then be selected alongside the required hose & fitting.

Mobile Plant Maintenance

Excavators, loaders & other hydraulic machines can bring very different hose assemblies through the workshop door. Replacement work requires the original hose system to be identified before components are prepared.

Fleet Workshops

Recurring vehicles often create recurring hose requirements. Recording the ferrule used on repeat assemblies can make future parts preparation faster & reduce time spent identifying known jobs again.

Agricultural Equipment

A hose repair becomes far more urgent when the tractor or implement is needed back in the paddock. Keeping commonly used ferrule families organised can help workshops prepare for hydraulic repairs on farm machinery.

R7 Hose Assembly

Smaller R7 hose work has its own component requirements. The HFF-R7 series includes sizes beginning at 3/16" for corresponding R7 assemblies.

True Bore Teflon Hose Assembly

True Bore Teflon hose leads technicians to a different parts family altogether. Hardie Hose lists the dedicated HFF-ST ferrule series for corresponding Teflon hose assemblies.

Product Selection Guide

“What size hose is it?” is important, but it isn't enough to select the ferrule. Establish the hose construction as well as its nominal size.

Hardie Hose Ferrule Size Guide

Hose Size

R7

1 & 2 Wire

True Bore Teflon

3/16"

HFF-R7-03

—

—

1/4"

HFF-R7-04

HFF-SN3-04

HFF-ST-04

5/16"

HFF-R7-05

HFF-SN3-05

HFF-ST-05

3/8"

HFF-R7-06

HFF-SN3-06

HFF-ST-06

1/2"

HFF-R7-08

HFF-SN3-08

HFF-ST-08

5/8"

HFF-R7-10

HFF-SN3-10

HFF-ST-10

3/4"

HFF-R7-12

HFF-SN3-12

HFF-ST-12

1"

HFF-R7-16

HFF-SN3-16

HFF-ST-16

Identify The Hose Family

Determine whether the assembly uses corresponding:

► R7 hose
► 1 & 2 wire hose
► True Bore Teflon hose

Confirm The Hose Size

Don't choose a ferrule simply because it slides over the hose. Establish the required size from reliable hose identification & assembly information.

Find The Corresponding Ferrule Series

The basic relationship is:

R7 hose → HFF-R7
1 & 2 wire hose → HFF-SN3
True Bore Teflon hose → HFF-ST

Check The Fitting

A ferrule doesn't work independently of the rest of the hose end. The hose, fitting & ferrule need to belong to the required assembly system.

Verify The Crimp Setup

Once the crimper closes, the ferrule is permanently formed. Confirm the required components, tooling & crimp information before beginning the assembly.

Same Hose Size Doesn't Mean Same Ferrule

Here's where an incomplete parts request can create trouble: a technician asks for a 1/2" ferrule.

There are three different 1/2" options represented across this collection:

Hose Family

1/2" Ferrule

R7

HFF-R7-08

1 & 2 wire

HFF-SN3-08

True Bore Teflon

HFF-ST-08

The missing piece of information is the hose family.

A request for “1/2" HFF-SN3 ferrule for corresponding 1 & 2 wire hose” gives the parts counter a substantially clearer requirement than size alone.

From Loose Components to a Finished Hose End

A reliable hose end comes from treating every component as part of one assembly rather than a collection of parts that happen to fit together.

A practical workshop sequence is:

Identify the hose → confirm the size → select the corresponding fitting → choose the ferrule → check the crimp requirements → assemble → inspect

This sequence is particularly important with hydraulic hose assemblies that may operate under substantial pressure once returned to service.

When finished hoses require protection around exposed runs, Hardie Hose | Spiral Guards provides related options for compatible assemblies subject to abrasion & external contact.

Expert Tips

Put The Series Name Before The Size On Storage Bins

A drawer marked only “3/8” can contain several very different parts. Labelling it “HFF-SN3 – 3/8” immediately tells the technician which hose family it belongs with.

Record The Ferrule Code On Repeat Jobs

Fleet workshops often see the same equipment again. Keeping the ferrule part number with the assembly record can save another identification exercise next time.

Count Components Before Starting A Batch

Nine ferrules won't finish ten assemblies. Check stock before cutting hose for a run of repeat jobs.

Keep New Ferrules Away From Grinding Debris

Clean components deserve clean storage. Steel swarf, dirt & general workshop contamination shouldn't be allowed to collect among unused hose assembly parts.

Don't Match A New Ferrule Against A Crimped One By Shape

The removed ferrule has already been permanently formed. Work from the known hose system & required component information rather than copying its post-crimp appearance.

Check Everything Before The First Crimp

A batch job magnifies a setup mistake very quickly. Confirm the hose, fitting, ferrule, tooling & required crimp details before repeating the process across multiple assemblies.

Separate Used Components Immediately

Old ferrules belong away from new stock. Keeping removed parts out of serviceable bins prevents them from being mistaken for unused components later.

A 3/8" Hose Arrives At The Bench – Which Ferrule Gets Used?

Three matching-size ferrules are nearby, but the hose itself decides which family needs attention.

For corresponding assemblies:

R7 3/8" → HFF-R7-06

1 & 2 wire 3/8" → HFF-SN3-06

True Bore Teflon 3/8" → HFF-ST-06

The shared 3/8" dimension doesn't make these components interchangeable.

Adding the ferrule series to workshop job cards & stock labels removes ambiguity before assembly begins

Set Up The Ferrule Drawer Around The Work

Good storage should make the correct component easier to reach & the wrong component easier to spot.

One practical arrangement is:

R7 Ferrules

HFF-R7-03 through HFF-R7-16

1 & 2 Wire Ferrules

HFF-SN3-04 through HFF-SN3-16

True Bore Teflon Ferrules

HFF-ST-04 through HFF-ST-16

Within each group, arrange stock progressively by hose size.

For keeping ferrules, fittings & other workshop consumables separated, browse Small Parts Organisers.

Protect The Finished Hose Beyond The Ferrule

Once the ends are assembled, attention shifts to what the hose will encounter on the machine. A correctly built hydraulic line can still suffer external wear if it repeatedly contacts steelwork, neighbouring hoses or abrasive surfaces.

The ferrule & external hose protection perform distinctly different jobs:

Component

Primary Role

Hose Ferrule

Forms part of the crimped hose-end assembly

Hose Fitting

Provides the corresponding end connection

Spiral Guard

Helps protect compatible hose exteriors from contact wear

Looking at the completed hose as a whole makes it easier to spot issues that aren't located at the crimped end.

Check The Parts Before The Crimper Makes The Decision Permanent

A quick component check at the bench can prevent an entire finished assembly from being cut apart later.

Before crimping, verify where appropriate:

► Hose family
► Hose size
► Ferrule series
► Ferrule product code
► Corresponding fitting
► Component cleanliness & condition
► Required tooling
► Crimp specification
► Finished assembly inspection requirements

Hydraulic hose assemblies can operate under hazardous pressure. Follow the relevant hose-system assembly, crimping, inspection, testing & equipment procedures.

For workshops preparing machinery before workloads increase, Spring Jobsite Prep Getting Your Gear Ready covers broader equipment preparation considerations.

Why Buy From Industrial Shed?

One missing ferrule can leave the hose, fitting & machine waiting on the same workshop bench. Industrial Shed supplies Hardie Hose ferrules alongside hose-building components & workshop equipment for Australian hose repairers, fleet workshops, farms & maintenance teams.

Regularly replenishing workshop consumables? on-site & workshop Services provides information about Industrial Shed's workplace restocking support.

For businesses managing recurring parts & equipment purchases, Trade support Solutions provides dedicated trade purchasing support.

Have The Right Ferrule Waiting Before The Next Hose Hits The Bench

R7, 1 & 2 wire & True Bore Teflon assemblies each call for their corresponding Hardie Hose ferrule family. Identify the hose, confirm the size & select the HFF series required for the build.

Stock the ferrules your workshop actually uses & spend less time searching for the missing component when the next hose repair arrives.

Frequently Asked Questions

Which Hardie Hose ferrule series is used for 1 & 2 wire hydraulic hose?

The corresponding range is HFF-SN3, with listed sizes from 1/4" through to 1". Match the size to the hose assembly being built.

What ferrule fits 3/8" Hardie Hose R7 hose?

The listed 3/8" R7 ferrule is HFF-R7-06. Confirm the remaining hose-end components & crimp requirements before assembly.

Which ferrule is listed for 1/2" True Bore Teflon hose?

Hardie Hose lists HFF-ST-08 as the 1/2" ferrule within the True Bore Teflon series.

Can HFF-R7 & HFF-SN3 ferrules be swapped when the nominal size matches?

No. They are separate ferrule series for different corresponding hose families. Select the series specified for the hose being assembled.

Why does a hose technician need the hose family as well as its size?

Several ferrule families share nominal sizes. Identifying the hose construction determines which ferrule series should be checked.

Can a previously crimped hose ferrule be reused?

A crimped ferrule has already been permanently formed. Use new components & follow the required assembly procedure when rebuilding a hose.

Brands

► Hardie Hose | Hose Ferrules

Match the Right Ferrule to Every Hose Assembly

A ferrule might be small, but selecting the wrong one can stop a hose assembly before it reaches the machine. Hardie Hose Hose Ferrules provide dedicated steel ferrule options for corresponding R7 hose, 1 & 2 wire hydraulic hose & True Bore Teflon hose, giving hose workshops, repairers & maintenance teams clearly identified components for professional assembly work.

Start with the hose construction rather than whichever ferrule looks closest on the bench. The range is divided into HFF-R7, HFF-SN3 & HFF-ST ferrule series, with sizes from 3/16" through to 1" depending on the hose family.

► HFF-R7 steel ferrules for corresponding R7 hose
► HFF-SN3 steel ferrules for corresponding 1 & 2 wire hose
► HFF-ST steel ferrules for corresponding True Bore Teflon hose
► Sizes covering common hose workshop requirements
► Individual part numbers for easier identification & reordering
► Suitable for professional hose assembly work

Building the complete hydraulic line? Browse Hardie Hose | Hydraulic Hoses for corresponding hose options.

What Are Hardie Hose Hose Ferrules?

Think of the ferrule as one part of the complete hose-end connection rather than a standalone steel sleeve. During the specified crimping process, the ferrule works with the corresponding hose & fitting to form the finished assembly.

The important workshop distinction is straightforward: ferrules carrying the same nominal size can belong to different hose systems.

Hardie Hose separates the collection into three main groups:

Ferrule Series

Corresponding Hose

HFF-R7

R7 hose

HFF-SN3

1 & 2 wire hose

HFF-ST

True Bore Teflon hose

That distinction matters before the crimper is switched on. Identify the hose family first then confirm its size & corresponding ferrule.

Need other components around the hose end? Explore Hose Fittings.

Why Choose Hardie Hose Hose Ferrules?

Busy hose benches work better when components can be identified without guesswork. Hardie Hose separates R7, wire-reinforced & True Bore Teflon ferrules into clearly defined series, helping technicians organise parts around the hose actually being assembled.

Dedicated Ferrule Families

R7 hose uses the HFF-R7 range, corresponding 1 & 2 wire hose uses HFF-SN3 & True Bore Teflon hose uses HFF-ST.

Practical Sizes With Clear Part Identification

Different hose jobs arrive with different bore requirements, so both series & size matter at the parts bench. Across the collection, ferrules extend from 3/16" through to 1" depending on family, with codes such as HFF-R7-06, HFF-SN3-08 & HFF-ST-12 providing precise references for storage & replenishment.

Easier Repeat Ordering

“We need more half-inch ferrules” leaves an important question unanswered. Recording the complete HFF code tells purchasing staff which series & size actually needs replacing.

Common Applications

Hydraulic Hose Repair Benches

When a damaged hydraulic assembly arrives in the workshop, identifying the hose construction comes before choosing the ferrule. Corresponding ferrules can then be selected alongside the required hose & fitting.

Mobile Plant Maintenance

Excavators, loaders & other hydraulic machines can bring very different hose assemblies through the workshop door. Replacement work requires the original hose system to be identified before components are prepared.

Fleet Workshops

Recurring vehicles often create recurring hose requirements. Recording the ferrule used on repeat assemblies can make future parts preparation faster & reduce time spent identifying known jobs again.

Agricultural Equipment

A hose repair becomes far more urgent when the tractor or implement is needed back in the paddock. Keeping commonly used ferrule families organised can help workshops prepare for hydraulic repairs on farm machinery.

R7 Hose Assembly

Smaller R7 hose work has its own component requirements. The HFF-R7 series includes sizes beginning at 3/16" for corresponding R7 assemblies.

True Bore Teflon Hose Assembly

True Bore Teflon hose leads technicians to a different parts family altogether. Hardie Hose lists the dedicated HFF-ST ferrule series for corresponding Teflon hose assemblies.

Product Selection Guide

“What size hose is it?” is important, but it isn't enough to select the ferrule. Establish the hose construction as well as its nominal size.

Hardie Hose Ferrule Size Guide

Hose Size

R7

1 & 2 Wire

True Bore Teflon

3/16"

HFF-R7-03

—

—

1/4"

HFF-R7-04

HFF-SN3-04

HFF-ST-04

5/16"

HFF-R7-05

HFF-SN3-05

HFF-ST-05

3/8"

HFF-R7-06

HFF-SN3-06

HFF-ST-06

1/2"

HFF-R7-08

HFF-SN3-08

HFF-ST-08

5/8"

HFF-R7-10

HFF-SN3-10

HFF-ST-10

3/4"

HFF-R7-12

HFF-SN3-12

HFF-ST-12

1"

HFF-R7-16

HFF-SN3-16

HFF-ST-16

Identify The Hose Family

Determine whether the assembly uses corresponding:

► R7 hose
► 1 & 2 wire hose
► True Bore Teflon hose

Confirm The Hose Size

Don't choose a ferrule simply because it slides over the hose. Establish the required size from reliable hose identification & assembly information.

Find The Corresponding Ferrule Series

The basic relationship is:

R7 hose → HFF-R7
1 & 2 wire hose → HFF-SN3
True Bore Teflon hose → HFF-ST

Check The Fitting

A ferrule doesn't work independently of the rest of the hose end. The hose, fitting & ferrule need to belong to the required assembly system.

Verify The Crimp Setup

Once the crimper closes, the ferrule is permanently formed. Confirm the required components, tooling & crimp information before beginning the assembly.

Same Hose Size Doesn't Mean Same Ferrule

Here's where an incomplete parts request can create trouble: a technician asks for a 1/2" ferrule.

There are three different 1/2" options represented across this collection:

Hose Family

1/2" Ferrule

R7

HFF-R7-08

1 & 2 wire

HFF-SN3-08

True Bore Teflon

HFF-ST-08

The missing piece of information is the hose family.

A request for “1/2" HFF-SN3 ferrule for corresponding 1 & 2 wire hose” gives the parts counter a substantially clearer requirement than size alone.

From Loose Components to a Finished Hose End

A reliable hose end comes from treating every component as part of one assembly rather than a collection of parts that happen to fit together.

A practical workshop sequence is:

Identify the hose → confirm the size → select the corresponding fitting → choose the ferrule → check the crimp requirements → assemble → inspect

This sequence is particularly important with hydraulic hose assemblies that may operate under substantial pressure once returned to service.

When finished hoses require protection around exposed runs, Hardie Hose | Spiral Guards provides related options for compatible assemblies subject to abrasion & external contact.

Expert Tips

Put The Series Name Before The Size On Storage Bins

A drawer marked only “3/8” can contain several very different parts. Labelling it “HFF-SN3 – 3/8” immediately tells the technician which hose family it belongs with.

Record The Ferrule Code On Repeat Jobs

Fleet workshops often see the same equipment again. Keeping the ferrule part number with the assembly record can save another identification exercise next time.

Count Components Before Starting A Batch

Nine ferrules won't finish ten assemblies. Check stock before cutting hose for a run of repeat jobs.

Keep New Ferrules Away From Grinding Debris

Clean components deserve clean storage. Steel swarf, dirt & general workshop contamination shouldn't be allowed to collect among unused hose assembly parts.

Don't Match A New Ferrule Against A Crimped One By Shape

The removed ferrule has already been permanently formed. Work from the known hose system & required component information rather than copying its post-crimp appearance.

Check Everything Before The First Crimp

A batch job magnifies a setup mistake very quickly. Confirm the hose, fitting, ferrule, tooling & required crimp details before repeating the process across multiple assemblies.

Separate Used Components Immediately

Old ferrules belong away from new stock. Keeping removed parts out of serviceable bins prevents them from being mistaken for unused components later.

A 3/8" Hose Arrives At The Bench – Which Ferrule Gets Used?

Three matching-size ferrules are nearby, but the hose itself decides which family needs attention.

For corresponding assemblies:

R7 3/8" → HFF-R7-06

1 & 2 wire 3/8" → HFF-SN3-06

True Bore Teflon 3/8" → HFF-ST-06

The shared 3/8" dimension doesn't make these components interchangeable.

Adding the ferrule series to workshop job cards & stock labels removes ambiguity before assembly begins

Set Up The Ferrule Drawer Around The Work

Good storage should make the correct component easier to reach & the wrong component easier to spot.

One practical arrangement is:

R7 Ferrules

HFF-R7-03 through HFF-R7-16

1 & 2 Wire Ferrules

HFF-SN3-04 through HFF-SN3-16

True Bore Teflon Ferrules

HFF-ST-04 through HFF-ST-16

Within each group, arrange stock progressively by hose size.

For keeping ferrules, fittings & other workshop consumables separated, browse Small Parts Organisers.

Protect The Finished Hose Beyond The Ferrule

Once the ends are assembled, attention shifts to what the hose will encounter on the machine. A correctly built hydraulic line can still suffer external wear if it repeatedly contacts steelwork, neighbouring hoses or abrasive surfaces.

The ferrule & external hose protection perform distinctly different jobs:

Component

Primary Role

Hose Ferrule

Forms part of the crimped hose-end assembly

Hose Fitting

Provides the corresponding end connection

Spiral Guard

Helps protect compatible hose exteriors from contact wear

Looking at the completed hose as a whole makes it easier to spot issues that aren't located at the crimped end.

Check The Parts Before The Crimper Makes The Decision Permanent

A quick component check at the bench can prevent an entire finished assembly from being cut apart later.

Before crimping, verify where appropriate:

► Hose family
► Hose size
► Ferrule series
► Ferrule product code
► Corresponding fitting
► Component cleanliness & condition
► Required tooling
► Crimp specification
► Finished assembly inspection requirements

Hydraulic hose assemblies can operate under hazardous pressure. Follow the relevant hose-system assembly, crimping, inspection, testing & equipment procedures.

For workshops preparing machinery before workloads increase, Spring Jobsite Prep Getting Your Gear Ready covers broader equipment preparation considerations.