Secure Connections for Pumps & Industrial Pipework
When pumps, pipework & transfer equipment need to come together properly, the flange is one connection you don't want to guess. Hardie Hose flanges give Australian workshops, farms, maintenance crews & industrial operators a choice of galvanised Table D/E flanges alongside Bauer male & female configurations for compatible pumping & fluid-transfer systems.
Covering everything from compact pipe runs to larger transfer setups, the collection spans 15mm to 200mm across its listed configurations. Buyers can match components for repairs, pump replacements, plant maintenance & new installations by checking the connection family, nominal size & mating arrangement before ordering.
► Galvanised Table D/E flanges
► Bauer male flanges with coupling
► Bauer female flanges with O-ring
► Listed sizes from 15mm to 200mm across the range
► Options for compatible pumps, pipework & transfer equipment
► Suitable for replacement, maintenance & installation work
Working on the wider pumping setup? Explore Irrigation Systems & Pumps for related equipment.
Choose The Flange By The Connection In Front Of You
A quick look at pipe diameter won't tell you everything you need to know. First establish whether the installation uses a compatible Table D/E flange or Bauer arrangement then verify the nominal size & component it needs to mate with.
|
Hardie Hose Range
|
Listed Sizes
|
Check First
|
|
Galvanised Table D/E Flanges
|
15mm–150mm
|
Existing compatible Table D/E arrangement
|
|
Bauer Male Flange with Coupling
|
100mm–200mm
|
Corresponding Bauer connection
|
|
Bauer Female Flange with O-Ring
|
100mm & 150mm
|
Required Bauer mating side
|
Galvanised Table D/E Flanges
For compatible conventional flanged pipework, Hardie Hose provides a useful progression of galvanised sizes. These options give fitters & maintenance crews choices for replacement work, equipment connections & planned pipe installations.
Bauer Male Flanges
Bigger transfer lines introduce a different set of connection requirements. Hardie Hose Bauer male products combine the flange with the corresponding coupling arrangement across listed 100mm, 150mm & 200mm configurations.
Bauer Female Flanges
Completing the mating side of a Bauer setup calls for the correct female component rather than a near-enough alternative. Listed Hardie Hose female options cover 100mm & 150mm configurations with the corresponding O-ring arrangement.
Hardie Hose Flange Sizes At A Glance
Galvanised Table D/E Range
Ten listed sizes make the galvanised range useful across both smaller pipework & larger industrial connections.
► 15mm – GF-FD015
► 20mm – GF-FD020
► 25mm – GF-FD025
► 32mm – GF-FD032
► 40mm – GF-FD040
► 50mm – GF-FD050
► 65mm – GF-FD065
► 80mm – GF-FD080
► 100mm – GF-FD100
► 150mm – GF-FD150
Bauer Male Flanges With Coupling
For larger compatible transfer systems, the male range steps into three substantial connection sizes.
► 100mm – IF-BCG100MF
► 150mm – IF-BCG150MF
► 200mm – IF-BCG200MF
Bauer Female Flanges With O-Ring
Two female configurations provide the corresponding option for selected Bauer installations.
► 100mm – IF-BCG100FF
► 150mm – IF-BCG150FF
Confirm the individual product specifications & adjoining equipment before combining or replacing connection components.
Where Hardie Hose Flanges Fit Into The Job?
A useful flange does more than join two components – it can create a practical point for future servicing. Pumps eventually need attention, equipment gets upgraded & pipework changes, so accessible connections can make dismantling compatible systems more manageable.
Common applications include:
► Pump inlet & outlet connections
► Agricultural pumping infrastructure
► Industrial water-transfer lines
► Plant pipework
► Equipment connection points
► Planned maintenance access
► Pump & machinery replacement
► Larger hose-to-pipe arrangements
Moving heavier components around the same project? Browse Materials Handling Equipment.
Applications Across Farms, Workshops & Industrial Sites
Agricultural Pumping
Keeping water moving across a property often depends on numerous connections working together. Farm systems may combine pumps, rigid pipework & removable transfer equipment, making positive identification of flange type & size particularly important when components need servicing or replacement.
Civil Water Transfer
Site water requirements can change quickly as excavation, drainage & temporary works progress. Compatible Bauer arrangements can form part of larger transfer setups where pumps, hoses & pipework may need to be repositioned as work advances.
Workshop Fabrication
The easiest time to think about future maintenance is while the installation is still being built. Fabricators can consider flange access, alignment & surrounding clearance when incorporating removable pumps, tanks or other equipment into new pipework.
Plant Maintenance
Opening a connection that's been untouched for years can reveal issues hidden during normal operation. Corrosion, worn hardware, damaged surfaces & disturbed sealing components deserve attention while the joint is accessible.
Pump Replacement
A failed pump already creates enough downtime without unnecessarily dismantling surrounding pipework. Suitable flanged separation points can make compatible equipment removal & replacement more straightforward.
Equipment Upgrades
Replacement machinery may bring different dimensions, access requirements or connection arrangements. Check the new equipment against the established pipework before assuming an existing flange will transfer directly to the upgraded installation.
Table D/E vs Bauer Flanges
A 100mm label on two components doesn't mean they belong together. Table D/E & Bauer products use different connection arrangements, so nominal size should be considered alongside the actual system.
|
What To Check
|
Table D/E Flange
|
Bauer Connection
|
|
Connection style
|
Bolted flange arrangement
|
Bauer coupling arrangement
|
|
Listed range
|
15mm–150mm
|
100mm–200mm across listed options
|
|
Identify first
|
Flange arrangement
|
Bauer configuration
|
|
Mating requirement
|
Corresponding compatible flange
|
Compatible Bauer side
|
|
Sealing consideration
|
Appropriate sealing arrangement
|
Corresponding Bauer seal arrangement
|
Replacement work is easier when the old component is identified before removal. Record relevant markings, configuration & size where practical so the new fitting can be compared against known information.
Five Checks Before Ordering
Establish The Flange Family
Positive identification narrows the parts search immediately. Determine whether you're working with the corresponding Table D/E arrangement or Bauer system before comparing individual sizes.
Verify The Nominal Size
Once the family is known, confirm the actual size required. Existing component markings, equipment information & appropriate measurements are more useful than estimating from appearance.
Look At The Mating Component
Every connection has another side that matters just as much. Inspect the adjoining flange, Bauer component or equipment connection before selecting the replacement.
Review The Seal
Mechanical hardware alone doesn't complete the joint. Check applicable gaskets, O-rings & accessible sealing surfaces while the connection is open.
Consider The Operating Environment
Physical fit is only one part of product selection. Confirm suitability for the intended system, media, operating conditions & adjoining equipment before commissioning.
Alignment Comes Before Tightening
Fasteners should hold an appropriately positioned joint together rather than become makeshift alignment tools. If substantial force is required simply to bring mating components together, investigate pipe position, supports & alignment before proceeding.
Before assembly:
► Clean accessible mating surfaces appropriately
► Check for visible flange damage
► Inspect applicable sealing components
► Review adjoining pipe support
► Examine relevant fastening hardware
► Position mating components correctly
► Follow the appropriate assembly procedure
► Inspect the joint after recommissioning
For hands-on installation work, explore Spanner & Wrench Sets.
When the job also requires replacement hardware, Structural Fasteners & Bolts covers fastening options for demanding mechanical & construction applications.
Details Worth Checking While Everything Is Apart
Let The Old Hardware Tell You Something
Uneven wear or corrosion can be useful evidence during maintenance. Instead of replacing only the obvious component, examine accessible fasteners, surfaces & surrounding parts for anything that warrants further attention.
Inspect The Seal Before Reassembly
Once the joint is closed, you've lost the easiest opportunity to inspect what's between the mating surfaces. Review the applicable gasket or O-ring & associated contact areas before rebuilding the connection.
Find The Reason Behind Repeat Leaks
A joint that repeatedly needs attention may be pointing to a wider problem. Alignment, vibration, sealing condition, support or operating circumstances can deserve investigation rather than another tightening attempt.
Leave Room For The Next Technician
A connection that's easy to install can still be frustrating to service if access disappears afterwards. Where the project allows it, consider future reach to fasteners, seals & removable equipment.
Keep Open Pipework Protected
Workshop dust & site debris don't need long to find an exposed line. Protect suitable open sections while work continues & inspect accessible surfaces before closing the system.
Observe The First Operating Cycle
Recommissioning gives the completed joint its first real test. Follow the relevant return-to-service procedure & inspect for unexpected leakage, movement or other issues requiring attention.
Useful Equipment For The Surrounding Installation
Flange work rarely happens in isolation. Positioning equipment, checking layout & completing mechanical repairs can bring several other requirements onto the same job.
► Measuring & Leveling Tools – equipment for layout, positioning & installation checks
► Hydraulic Equipment – related equipment for industrial workshop & maintenance tasks
► Lifting Equipment – equipment for handling workshop & site loads
► Environmental Protection Products – supporting products where fluid handling & work-area protection form part of the task
Before The System Returns To Service
The last few checks can be the difference between closing the job & opening the connection again. Review the complete assembly while access remains clear.
► Verify the installed flange against the intended system
► Confirm the mating component
► Examine accessible sealing surfaces
► Check the applicable gasket or O-ring
► Inspect relevant fasteners
► Review pipework alignment
► Check surrounding supports
► Follow the required assembly procedure
► Restore operation according to workplace requirements
► Observe the connection after recommissioning
Pressurised equipment can retain hazardous stored energy. Follow the applicable isolation, maintenance & recommissioning procedures for the system being serviced.
Further Reading For Site & Maintenance Crews
A temporary setup can only perform as well as the equipment supporting it. This guide looks at choosing generator capacity around practical worksite power requirements.
Dust, vibration & relentless operating hours quickly expose weak maintenance practices. Explore considerations around maintaining machinery in demanding quarry conditions.
Having the correct component doesn't help much when the work area is difficult to reach. Read practical guidance around choosing access equipment for site tasks.