Brass BSP, Galvanised & CFA Caps for Reliable Line Closure
Hardie Hose brass BSP, galvanised & CFA caps give fitters, maintenance crews & site teams practical options for closing compatible pipe ends & exposed connections. From workshop pipework & agricultural water systems to plant maintenance & equipment storage, the right cap helps keep an unused connection covered until it's required again.
Industrial Shed stocks Hardie Hose caps across a broad range of sizes, including #33 brass BSP caps from 1/8" to 2-1/2", galvanised caps from 15mm to 100mm & a brass CFA blanking cap.
► Brass BSP caps across common trade sizes
► Galvanised caps for compatible pipework
► Brass CFA blanking cap option
► Suitable for temporary & ongoing line closure
► Useful during servicing, shutdowns & equipment storage
► Selection based on connection type, size, material & application
For surrounding fittings & installation requirements, browse Plumbing Fixtures & Accessories.
What Are Hardie Hose Caps?
Hardie Hose caps are closure fittings used to cover compatible pipe ends & connections that aren't currently in service.
That simple job becomes important once pipework is opened. Grinding dust, swarf, soil, moisture & general workshop debris can reach an exposed connection while repairs or modifications are taking place. Installing a correctly matched cap provides a physical closure until the connection is required again.
Three main cap groups are available within this collection:
► Hardie Hose #33 Brass Caps – BSP sizes from 1/8" to 2-1/2"
► Hardie Hose Gal Caps – galvanised options from 15mm to 100mm
► Hardie Hose CFA Blanking Cap – brass cap for the corresponding CFA connection
Choose according to the actual connection rather than outside appearance alone.
Which Hardie Hose Cap Do You Need?
The fastest way to narrow the range is to establish what you're closing first.
|
Hardie Hose Cap
|
Size Range
|
Start Here When
|
|
#33 Brass BSP Caps
|
1/8"–2-1/2" BSP
|
You have a compatible BSP connection
|
|
Galvanised Caps
|
15mm–100mm
|
You're closing corresponding compatible pipework
|
|
CFA Blanking Cap
|
Dedicated option
|
The installation requires the corresponding CFA cap
|
Brass BSP Caps
Choose from the #33 brass range when the connection requires the corresponding BSP cap. Confirm the BSP size rather than relying solely on an outside measurement.
Galvanised Caps
Look at the galvanised range when you're working with compatible pipework requiring one of the listed 15mm–100mm sizes. Match the fitting to the existing connection & application requirements.
CFA Blanking Cap
Where the equipment specifically requires the corresponding CFA closure, use the dedicated Hardie Hose brass CFA blanking cap rather than substituting a general pipe cap.
If pumps or water-transfer equipment form part of the same installation, see Irrigation Systems & Pumps.
Hardie Hose Cap Sizes
#33 Brass BSP Caps
The Hardie Hose #33 brass cap range includes:
► 1/8" BSP – BF-33-02
► 1/4" BSP – BF-33-04
► 3/8" BSP – BF-33-06
► 1/2" BSP – BF-33-08
► 3/4" BSP – BF-33-12
► 1" BSP – BF-33-16
► 1-1/4" BSP – BF-33-20
► 1-1/2" BSP – BF-33-24
► 2" BSP – BF-33-32
► 2-1/2" BSP – BF-33-40
Galvanised Caps
Available Hardie Hose galvanised cap sizes include:
► 15mm – GF-C015
► 20mm – GF-C020
► 25mm – GF-C025
► 32mm – GF-C032
► 40mm – GF-C040
► 50mm – GF-C050
► 65mm – GF-C065
► 80mm – GF-C080
► 100mm – GF-C100
Similar-looking fittings aren't necessarily interchangeable. Verify the connection before ordering rather than attempting to overcome a mismatch during installation.
Why Use A Hardie Hose Cap?
A missing cap may look insignificant until a dismantled system needs to go back together.
Covering an appropriate connection can help:
► Keep exposed pipe ends covered during maintenance
► Reduce dirt & foreign material entering inactive lines
► Protect suitable connections on stored equipment
► Close unused branches in compatible pipework
► Protect endpoints between installation stages
► Keep disconnected assemblies covered during repairs
► Prepare spare connection points for future use
The benefit is particularly clear in working environments where cutting, grinding, drilling or general site activity continues around dismantled equipment.
Common Applications
Workshop Air & Fluid Pipework
Swarf & grinding residue can travel further than expected across a busy workshop.
When equipment is removed or an unused branch is exposed, fitting the correct cap gives the open connection a barrier against surrounding contamination.
Agricultural Water Systems
Dust, soil & vegetation make uncovered fittings particularly vulnerable around farm infrastructure.
Seasonal lines, disconnected pumps & unused branches can all benefit from suitable closures while they're inactive.
Pump Maintenance
Pulling a pump out for repair can leave adjoining pipework exposed for hours, days or longer.
Where the connection permits it, fitting an appropriate cap while the pump is away helps keep the open end covered until reassembly.
Plant Shutdowns
Maintenance shutdowns can involve welding, grinding, cleaning & machinery replacement happening in the same area.
Closing compatible unused connections early in the job can reduce unnecessary exposure while other work continues.
Equipment Storage
A dismantled component may sit on a workshop shelf or service vehicle for months before it's needed again.
Covering appropriate connections before storage can help prevent loose workshop debris entering while the component is out of service.
Future Pipework Extensions
Some branches are installed specifically for equipment that hasn't arrived yet.
A properly selected cap provides a practical closure during the gap between installation stages while leaving the connection available for future work.
How To Select The Right Cap?
Confirm The Connection Type
Begin with the fitting itself.
Determine whether you're dealing with the corresponding BSP connection, galvanised pipework or CFA application before selecting the cap family.
Verify The Size
Don't choose from visual diameter alone.
Pipe & thread sizing can be deceptive when measured externally. Existing markings, component specifications or verified system information provide a better basis for selection.
Check Thread Compatibility
The brass #33 range is identified by BSP size.
A cap that doesn't engage correctly should be removed & checked. Applying additional force won't correct an incompatible or misaligned thread.
Consider The Material
Brass & galvanised caps shouldn't be treated as interchangeable simply because both are closure fittings.
Choose according to the connection, surrounding components & requirements of the job.
Check The Application
Physical fit is only one consideration.
Confirm the selected product is appropriate for the intended media, operating conditions & installation before putting the line into service.
Consider How Long The Closure Will Remain
A temporary maintenance closure & a branch expected to stay inactive for years present different requirements.
Long-term closures should remain visible & accessible within normal inspection practices.
Cap vs Plug – What's The Difference?
The terms are sometimes used loosely but the connection arrangement is different.
A threaded cap generally fits over a compatible externally threaded connection. A threaded plug generally fits into a compatible internally threaded opening.
Knowing which connection you have before ordering can prevent a simple maintenance job turning into another parts run.
Expert Tips From The Workshop
Cover Open Connections Early
Don't leave the cap until pack-up.
If a suitable connection will remain exposed while grinding, drilling or repair work continues nearby, closing it early reduces its exposure to contamination.
Check Threads Before Reassembly
A few seconds under good lighting can reveal dirt, damaged threads or other problems before installation begins.
Don't Force A Poor Fit
Resistance at the start of engagement deserves investigation.
Check sizing, thread type, alignment & condition rather than reaching immediately for a larger wrench.
Keep Common Caps With Maintenance Stock
Operations repeatedly servicing the same equipment can save time by keeping commonly required closure fittings with workshop consumables.
Protect Components Before Storage
Fit suitable closures before dismantled equipment reaches the shelf rather than relying on somebody to clean the connections months later.
Identify Long-Term Closed Branches
Clear identification can help the next technician understand why a branch exists & whether it's intended for future service.
Related Equipment For Pipework & Maintenance Jobs
Closing the connection may be one small step in a much larger repair.
► Hydraulic Equipment – equipment for hydraulic workshop & maintenance requirements
► Testing & Calibration Tools – equipment for checking & testing during servicing
► Tool Maintenance Kit – cleaning & maintenance gear for workshop equipment
► Workshop Equipment – broader workshop equipment for servicing, repairs & day-to-day maintenance
Before Closing The Line
Treat the exposed connection as part of the equipment rather than an afterthought.
► Confirm the line is appropriately isolated where required
► Identify the correct connection type
► Verify nominal size & thread where applicable
► Inspect accessible threads & surfaces
► Remove suitable loose contamination
► Check the selected cap before installation
► Avoid forcing components that don't engage correctly
► Identify longer-term closures where required
► Follow applicable procedures before recommissioning
If the line forms part of pressurised equipment, always follow the appropriate isolation, servicing & return-to-service procedures.
Useful Reading For Maintenance Crews
Working around fluids, cleaning products & workshop chemicals? This guide explains the information operators should know how to find on an SDS.
See how maintenance planning changes when equipment operates around abrasive material, dust & demanding production conditions.
Preparing equipment before workloads increase is a useful opportunity to find missing fittings, servicing requirements & workshop problems before they become delays.