Purpose-Made Lubrication for Clean, Consistent Threads

Every thread puts the dies under load. Garrick Herbert Threading Oils provide ASADA neat cutting oils developed for pipe, rod & bolt threading, helping maintain effective lubrication where the cutting edges meet the material.

The choice becomes particularly important when the material changes. ASADA Standard Threading Oil suits general-purpose threading, while ASADA High Grade Threading Oil is intended for more demanding stainless & high-tensile steel applications. Available pack sizes also make it possible to match supply to anything from occasional maintenance work through to regularly used threading stations.

Running an ASADA machine regularly? Garrick Herbert | Pipe Threading Machines provides the equipment that puts these oils to work. Keeping the correct grade alongside the machine, dies & dieheads makes preparation easier when the next length of pipe reaches the threading station.

Good threading starts before the dies turn — with the correct tooling, material setup & cutting oil ready to go.

What Are Garrick Herbert Threading Oils?

ASADA Threading Oils are neat cutting oils used during compatible threading operations. Unlike water-miscible fluids that require dilution, neat threading oil is used in its supplied form according to the equipment & product requirements.

The range includes:

Threading oil forms part of a complete cutting setup alongside the machine, diehead & dies. Selecting each component around the workpiece material & required thread gives the operation a sound starting point.

For threading tasks performed away from a dedicated machine, Threading Tools provides additional equipment for suitable workshop & site applications.

Why Choose Garrick Herbert Threading Oils?

Could any lubricant already sitting on the workshop shelf do the same job? Not necessarily.

Threading is a cutting operation. Purpose-made threading oil is intended to lubricate the contact area while the dies form the thread, rather than serving as a general-purpose machine lubricant.

ASADA threading oils are suited to professional work involving:

► Pipe threading
► Rod & bolt threading
► Repeated workshop preparation
► Plumbing installations
► Mechanical services
► Plant maintenance
► Fabrication work
► Repair & replacement components

Keeping the appropriate oil available also means a change in material doesn't have to become a last-minute decision at the machine.

Where threaded components form part of a larger fabricated assembly, How to Choose the Right Welding Machine for Your Fabrication Shop provides practical guidance for selecting welding equipment around the material & joining process.

Common Applications

Pipe Preparation For Plumbing & Mechanical Services

A pipe can be the correct diameter & still be useless if the end preparation isn't right.

Once the required length has been established, the pipe needs to move through cutting, preparation & threading with the correct tooling for the connection being produced.

Where pipe needs to be cut before threading, Garrick Herbert | Pipe Saws provides ASADA cutting equipment for compatible pipe applications.

Repeated Workshop Threading

One thread doesn't consume oil like a full run of prepared pipe.

Workshops processing multiple components should check oil supply before production begins, particularly when the threading machine forms a regular part of daily work. Having the correct grade available avoids interrupting the operation simply because a consumable has run short.

Long pipe also needs appropriate support around the machine. Garrick Herbert | Roller Stands includes options for supporting compatible pipe & rod during suitable workshop operations.

Stainless-Steel Threading

Change the material & review the setup.

ASADA High Grade Threading Oil is intended for stainless & high-tensile steels. The dies should also be appropriate for the material rather than assuming a setup used for general-purpose steel can continue unchanged.

Keeping high-grade oil clearly identified reduces the chance of the wrong product being used when different materials pass through the same workshop.

Rod & Bolt Threading

Not every threaded component carries fluid.

Rod, studs & bolts can also require machine-cut external threads, with lubricant working at the cutting interface in much the same way.

The machine, dies, thread form & material should all be confirmed before starting. For related drilling & workshop machining, Garrick Herbert | Drill Presses & Accessories provides equipment for compatible hole-making applications.

Plant Maintenance & Repair

Repair work often starts with an existing component rather than a clean drawing.

A replacement threaded section may need to match an established assembly, fitting or piece of machinery. Identify the material & thread requirements before selecting the tooling & oil.

When maintenance work involves moving heavier components or stock around the workshop, Material Handling Equipment provides equipment for suitable lifting, positioning & movement tasks.

Site & Workshop Preparation

Some threaded components can be prepared in advance. Others need to be produced closer to the installation.

Whichever approach applies, keep the correct oil protected, labelled & available with the threading equipment rather than transferring workshop fluids into unidentified containers.

For practical preparation before demanding work periods, Spring Jobsite Prep – Getting Your Gear Ready covers additional equipment & maintenance considerations.

Product Selection Guide

Start With The Material

This is the simplest way to narrow the choice.

General-purpose threading: consider ASADA Standard Threading Oil.

Stainless & high-tensile steel: consider ASADA High Grade Threading Oil.

The correct dies, machine & thread requirements still need to be confirmed for the individual application.

Standard vs High Grade Threading Oil

Choose A Pack Size Around Actual Use

A workshop that threads pipe every day has very different requirements from a maintenance crew using a machine occasionally.

5L can be practical for lighter usage, mobile setups or a specialist grade that isn't consumed every day.

20L provides a larger supply for regularly used threading equipment.

205L Standard Threading Oil can suit substantially higher consumption where storage, handling & usage justify bulk supply.

More isn't automatically better. Consider how quickly the oil will be consumed & how it will be stored & handled.

Match Oil & Dies To The Same Material

Don't change from general steel to stainless & consider only the lubricant.

The cutting tools also need to suit the workpiece. Establish the complete setup before the first cut:

Material → Thread form → Dies → Diehead → Machine → Oil

That short check can prevent a material change from becoming an equipment problem.

Threading Oil Or Soluble Cutting Fluid?

The names sound similar, but the products serve different requirements.

ASADA Threading Oil is a neat cutting oil for applicable threading operations. Water-miscible cutting fluids are prepared differently & can be intended for other machining processes.

Use the fluid specified for the operation & equipment rather than substituting whatever happens to be closest to the machine.

For other metal preparation work around fabricated components, Metal Cutting & Grinding Tools covers complementary equipment for suitable cutting, grinding & surface-preparation tasks.

Keeping A Threading Station Ready

A threading machine can be perfectly serviceable & still sit unused if the oil supply has been overlooked.

Before a run of pipe or rod, check:

► Correct oil grade
► Available oil quantity
► Die condition
► Diehead setup
► Workpiece material
► Required thread form
► Machine condition
► Oil delivery where applicable
► Pipe or rod support

During work, changes in cutting behaviour deserve attention. Don't simply add more force when the machine begins behaving differently from normal.

For additional guidance on equipment warning signs, 7 Signs Your Power Tool Needs a Service Before It Fails on Site covers symptoms worth investigating before equipment becomes unavailable.

Handling & Storing Threading Oil

Workshop fluids deserve the same organisation as tooling.

Keep containers correctly identified & follow the current product documentation for handling, storage, personal protection, spill response & disposal. Avoid decanting oil into an unidentified container where it could later be mistaken for another workshop fluid.

Before introducing a threading oil into the workplace, review its current Safety Data Sheet.

The How to Read a Safety Data Sheet – A Quick Guide for Workshop Operators explains the information commonly found in an SDS & how it applies around workshop products.

Where frequently used fluids & consumables need regular replenishment, on-site & workshop Services can assist with ongoing workshop supply requirements.

Expert Tips

Check the workpiece before choosing the oil. Material is one of the first details to establish, particularly when stainless or high-tensile steel enters the job.

Keep standard & high-grade oil clearly separated. Clear identification is especially useful where several materials are processed in the same workshop.

Inspect the dies when cutting behaviour changes. Oil is important, but worn or damaged tooling can also affect the threading operation.

Check supply before starting multiple components. Running short halfway through a batch is easily avoided.

Keep chips & contamination under control. Follow the machine manufacturer's cleaning & oil-management requirements.

Don't rely on extra force to solve poor cutting. Stop & inspect the tooling, lubricant, material & setup when normal performance changes.

Record what each threading station uses. Machine model, die information & normal oil grade can be kept together for easier replenishment.