► Drive Anchor

Fast & Secure Fixings for Concrete, Brick & Masonry Applications Fixing into concrete or masonry needs speed, reliability & holding strength. Loose fixings or slow installation can delay work & compromise safety. That’s where drive anchors Australia trades rely on come in. At Industrial Shed, these anchors are supplied for...

Fast & Secure Fixings for Concrete, Brick & Masonry Applications

Fixing into concrete or masonry needs speed, reliability & holding strength. Loose fixings or slow installation can delay work & compromise safety. That’s where drive anchors Australia trades rely on come in.

At Industrial Shed, these anchors are supplied for construction, fit-out & industrial applications where fast, consistent fixing is critical. Designed for quick installation, hammer drive anchors — also known as hammer in anchors — allow trades to secure materials directly into concrete, brick & block without complex setup. As a proven concrete drive anchors solution, they’re widely used where permanent fixing is required.

Across job sites, these anchors are used for securing brackets, fixtures, framing & general installations. You’ll commonly see them used alongside Anchor Bolts, Hex Bolts & Anchors & Wall Plugs depending on load requirements. Installation is typically supported by Hammer Drills, while accuracy is maintained using Measuring & Layout Tools & final adjustments are handled with Hand Tools.

What makes the difference on site is speed.
Set, drive & secure in one motion.
That’s what keeps jobs moving.

What’s in This Collection:

Industrial Shed supplies a focused range of masonry drive anchors Australia professionals use for fast installation & reliable performance across concrete & brick applications.

► Hammer Drive Anchors
‣ Fast-install concrete anchors Australia for secure fixing into concrete & block

► Flat Head Drive Anchors
‣ Provides a flush finish for clean installations in visible areas

► Round Head Drive Anchors
‣ Suitable for applications where surface finish is less critical

► Zinc-Plated Drive Anchors
‣ Corrosion-resistant finish for internal & light-duty environments

► Pre-Assembled Drive Anchor Systems
‣ Simplifies installation with ready-to-use fixing solutions

► General Purpose Drive Anchors
‣ Suitable for a wide range of trade & construction applications

These anchors are selected for consistent performance, ease of installation & reliability across high-use job sites.

 

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • M6.5 x 50mm - Hammer Drive Anchor - Zinc Alloy
    M6.5 x 50mm - Hammer Drive Anchor - Zinc Alloy
    M6.5 x 50mm Hammer Drive Anchor – Zinc Alloy The M6.5 x 50mm Hammer Drive Anchor is built for secure, fast anchoring into concrete and masonry where maximum embedment depth and holding strength are required. Manufactured from durable zinc alloy, it delivers strong expansion...
    $1.49
    $1.49
  • M6.5 x 38mm - Hammer Drive Anchor - Zinc Alloy
    M6.5 x 38mm - Hammer Drive Anchor - Zinc Alloy
    M6.5 x 38mm Hammer Drive Anchor – Zinc Alloy The M6.5 x 38mm Hammer Drive Anchor is a heavy-duty, fast-install fixing designed for secure anchoring into concrete and masonry where increased embedment depth is required. Made from durable zinc alloy, it delivers strong expansion...
    $1.24
    $1.24
  • M6.5 x 32mm - Hammer Drive Anchor - Zinc Alloy
    M6.5 x 32mm - Hammer Drive Anchor - Zinc Alloy
    M6.5 x 32mm Hammer Drive Anchor – Zinc Alloy The M6.5 x 32mm Hammer Drive Anchor is built for fast, reliable anchoring into concrete and masonry where extra embedment depth is required. Manufactured from durable zinc alloy, this anchor delivers strong expansion and consistent...
    $1.09
    $1.09
  • M6.5 x 25mm - Hammer Drive Anchor - Zinc Alloy
    M6.5 x 25mm - Hammer Drive Anchor - Zinc Alloy
    M6.5 x 25mm Hammer Drive Anchor – Zinc Alloy The M6.5 x 25mm Hammer Drive Anchor is a tough, time-saving fixing designed for fast anchoring into concrete and masonry. Made from durable zinc alloy, it delivers reliable expansion and holding power with a simple...
    $1.00
    $1.00
  • M6 x 75mm - Split Drive Anchor - H.D.G.
    M6 x 75mm - Split Drive Anchor - H.D.G.
    The M6 x 75mm Split Drive Anchor is a heavy-duty, impact-set fixing engineered for permanent anchoring into concrete and masonry where maximum embedment depth and long-term holding strength are critical. Finished in hot dip galvanising, it delivers excellent corrosion resistance for external, coastal, and...
    $1.82
    $1.82
  • M6 x 65mm - Split Drive Anchor - H.D.G.
    M6 x 65mm - Split Drive Anchor - H.D.G.
    The M6 x 65mm Split Drive Anchor is a heavy-duty, impact-set fixing designed for permanent anchoring into concrete and masonry where extra embedment depth and long-term strength are required. Finished in hot dip galvanising, it provides superior corrosion resistance for outdoor, coastal, and exposed...
    $1.57
    $1.57
  • M6 x 50mm - Split Drive Anchor - H.D.G.
    M6 x 50mm - Split Drive Anchor - H.D.G.
    The M6 x 50mm Split Drive Anchor is a heavy-duty, impact-set fixing engineered for permanent anchoring into concrete and masonry where deeper embedment and long-term durability are required. Finished in hot dip galvanising, it offers excellent corrosion resistance for external and exposed environments. Built...
    $1.35
    $1.35
  • M6 x 38mm - Split Drive Anchor - H.D.G.
    M6 x 38mm - Split Drive Anchor - H.D.G.
    The M6 x 38mm Split Drive Anchor is a heavy-duty mechanical fixing designed for fast, permanent anchoring into concrete and masonry. Finished in hot dip galvanising, it delivers superior corrosion resistance for harsh environments and external applications. Built for tradies who need reliable holding...
    $1.30
    $1.30
  • M6 x 100mm - Split Drive Anchor - H.D.G.
    M6 x 100mm - Split Drive Anchor - H.D.G.
    The M6 x 100mm Split Drive Anchor is a heavy-duty, impact-set fixing built for permanent anchoring into concrete and masonry where maximum embedment depth and long-term structural strength are required. Finished in hot dip galvanising, it offers superior corrosion resistance for external, coastal, and...
    $2.22
    $2.22
  • M5 x 22mm - Hammer Drive Anchor - Zinc Alloy
    M5 x 22mm - Hammer Drive Anchor - Zinc Alloy
    The M5 x 22mm Hammer Drive Anchor is a fast, no-fuss fixing solution built for light to medium-duty anchoring into concrete and masonry. Manufactured from durable zinc alloy, this anchor is designed for quick installation where speed, reliability, and a clean finish matter. Ideal...
    $0.54
    $0.54

Faster Installation for High-Volume Concrete Fixing Work

On-site efficiency often comes down to how quickly fixings can be installed without compromising strength.

Threaded anchors require multiple steps.
Expansion anchors take longer to set correctly.
Drive anchors simplify the process.

Concrete drive anchors install faster than expansion anchors & require fewer steps than threaded fixings, making them the preferred choice for high-volume installation work.

Used daily across high-output construction sites, fit-out projects, manufacturing environments, logistics operations & industrial maintenance, these fixings are relied on where speed & consistency matter.

For teams working across multiple fixing points, reducing installation time directly improves productivity while maintaining reliable hold strength.

You’ll regularly see these used alongside Anchor Bolts, Anchors & Wall Plugs & Hex Bolts depending on application type & load requirements.

Industrial Shed supports fast project turnaround with Same day dispatch, ensuring fixings are available when needed. For ongoing supply across teams, Trade support Solutions provides consistent availability across projects.

► Industrial Shed supplies reliable drive anchors Australia trades depend on
► Fast-install fixing solutions designed for concrete & masonry applications
► Bulk supply options available for projects & trade teams
► Fast nationwide delivery across Australia

Install Faster with Concrete Drive Anchors That Deliver Reliable Fixing

Explore the drive anchors range at Industrial Shed & choose fastening solutions that deliver speed, strength & consistent performance across every installation.

Frequently Asked Questions

Drive anchors are used to secure fixtures into concrete, brick or masonry surfaces quickly & permanently.

They are inserted into a pre-drilled hole & driven into place using a hammer for a secure hold.

Yes, they are specifically designed for use in concrete, brick & block.

Yes, they are typically used for permanent installations & are not designed for removal.

A hammer drill is used to create the hole & a hammer is used to drive the anchor.

They are ideal when fast installation & consistent fixing are required across multiple points.

Brands