8-in-1 Setup, Measuring & Push-Stick Tool

The Carbitool Table Saw Mate SMT-1 combines eight useful table-saw setup, measuring & work-control functions in one workshop accessory. Rather than being a table saw machine, the SMT-1 is a Carbitool safety aid incorporating a depth gauge, rules, angle references, square, centre finder & push-stick function for woodworking setup around the saw.

Where the cutting result depends on matching the blade to the material & operation, Carbitool Bench Saw Blades provides the corresponding blade range. For broader dimensional checking away from the saw, Carbitool Measuring Tools covers dedicated woodworking squares, rulers & layout tools.

For cabinetmakers, furniture makers, joiners & woodworking workshops, the value of the SMT-1 lies in keeping several frequently used setup references together in a single table-saw accessory.

What Is the Carbitool Table Saw Mate?

The Carbitool SMT-1 Table Saw Mate is an 8-in-1 table-saw setup & safety aid.

Carbitool documents the following functions:

That combination separates the SMT-1 from a conventional ruler, square or push stick.

It is not designed around one isolated measurement. Its purpose is to provide multiple setup references plus a push-stick function in one identifiable workshop tool.

Why Choose the Carbitool Table Saw Mate?

Table-saw work involves more setup decisions than blade selection alone.

Blade position needs checking.

Components need measuring.

Square references matter.

Mitre work introduces angles.

Stock needs to be handled appropriately around the cutting operation.

The SMT-1 brings several tools associated with those tasks into one accessory.

Eight Functions Reduce Tool Changes During Setup

A conventional workflow may involve reaching separately for a rule, square, depth reference, angle guide & push stick.

The SMT-1 consolidates several of those functions.

That does not make dedicated measuring tools unnecessary. It gives the operator a compact reference for common table-saw setup tasks.

230mm Rule for General Measurement

The integrated 230mm rule provides the longer of the two documented linear measuring references.

This can assist with straightforward dimensional checks around the setup where that range is appropriate.

For dimensions beyond the SMT-1's range or work requiring another measuring format, use a suitable dedicated measuring instrument.

154mm Hook Rule for Edge Referencing

Carbitool also specifies a 154mm hook rule.

A hook reference provides a different approach from simply aligning the end of a straight rule visually with a workpiece edge.

That distinction can be useful when measuring from a defined edge or reference point.

90° Square for Setup Checks

Square relationships occur throughout woodworking.

The SMT-1 incorporates a 90° square reference, allowing a right-angle check to be made with the same accessory used for other table-saw setup tasks.

Where higher-detail layout or larger workpieces require dedicated equipment, Measuring & Layout Tools provides the broader workshop category.

45° Gauge for Mitre Work

Mitre cuts introduce angular setup rather than a simple square relationship.

Carbitool includes a 45° gauge for mitre cuts within the SMT-1.

This gives the operator a direct reference for one of the most common woodworking angles without changing to a separate tool.

30° & 60° Angle References

Not every angled component is a 45° mitre.

The SMT-1 also incorporates 30° & 60° marks for setting up angles.

Those references extend the accessory beyond basic square & mitre checking, particularly where repeated woodworking layouts use those geometries.

Common Applications

Table Saw Setup

The strongest use case is exactly what the product name suggests: keeping useful references available during table-saw preparation.

Before cutting, the operator may need to establish blade position, check an angle, confirm a measurement or reference a component.

Having those functions available in one tool can make the setup process more organised.

Checking Blade Depth

The integrated depth-gauge function provides a physical reference for setup.

Blade projection should be established according to the machine, blade, workpiece & operation rather than through guesswork.

The gauge provides the reference function; the complete saw setup still needs to be appropriate for the task.

Cabinet Components

Cabinetmaking frequently involves repeated square cuts, dimensioned components & sheet-material preparation.

The SMT-1's combination of linear measurement, square references & angle functions can support those setup stages before components move into routing, drilling or assembly.

For subsequent timber assembly, Carbitool Clamps provides workholding options for glue-ups, frames & cabinet components.

Furniture Parts

Furniture work can move between square components, mitred pieces & repeat dimensions within the same project.

A multi-function reference tool becomes useful where several setup checks occur around one cutting station.

The objective remains consistent component preparation rather than relying on the accessory to compensate for an incorrectly adjusted machine.

Mitres & Angled Components

The documented 45°, 30° & 60° references give the SMT-1 a clear role where angled work forms part of the project.

Check the required geometry before cutting.

Make the adjustment.

Verify the setup.

Then use an appropriate test piece where the operation warrants confirmation before finished material is machined.

Finding a Workpiece Centre

Centre finding is another function that has little to do with the table saw motor or blade itself, yet can be useful during component preparation.

Carbitool includes a centre finder within the SMT-1's eight documented functions.

This reinforces the product's role as a multi-function workshop reference rather than merely a push stick.

Product Selection Guide

Industrial Shed's current Carbitool Table Saws collection contains one product, so selection is primarily about determining whether the SMT-1 functions match the workshop requirement.

SMT-1 vs a Dedicated Measuring Tool

The SMT-1 prioritises multiple functions in one accessory.

A dedicated square, rule or specialist gauge prioritises its individual measuring function.

Neither approach makes the other redundant.

For quick references around a table-saw station, the SMT-1 consolidates useful functions.

For specialised measurement, larger dimensions or another measuring format, choose the appropriate dedicated tool.

SMT-1 vs a Conventional Push Stick

A conventional push stick concentrates on one function.

The SMT-1 combines its push-stick role with seven additional setup & measurement functions.

That difference is the main reason to choose the Table Saw Mate rather than evaluating it solely as another piece of work-control equipment.

Table Saw Mate vs Table Saw

Despite the collection URL, the SMT-1 is not a powered table saw.

It has no motor, drive system, cutting blade, powered feed system or saw table.

It is a table-saw accessory.

Buyers looking for cutting machinery should instead browse Saws for Industrial Shed's broader powered-saw range.

Expert Tips

Establish the Setup Before Cutting

Measurement should happen before the workpiece reaches the blade.

Use the appropriate SMT-1 reference to establish the required dimension, depth or angle, then confirm the complete machine setup before starting the cut.

A gauge is most valuable when it prevents guesswork rather than confirming a mistake afterward.

Keep Measuring Surfaces Clean

Sawdust or debris between a reference tool & the surface being checked can interfere with the way the tool sits.

Clean the relevant contact surfaces before making a setup decision.

The same principle applies to squares, gauges & other workshop measuring tools.

Separate Blade Selection From Machine Setup

A correct angle does not compensate for the wrong saw blade.

Likewise, a suitable blade does not correct an inaccurate setup.

For woodworking saw blades, consider diameter, bore, tooth count, cutting application & machine compatibility separately from the SMT-1 setup functions.

Carbitool's professional saw-blade ranges include products specifically documented for table-saw applications.

Inspect the Blade When Cut Quality Changes

A rough result does not automatically mean the saw setting has moved.

Blade condition, tooth configuration, material, feed & machine setup can all influence the cut.

When the blade itself becomes the question, The Black Print: Blade Sharpening 101 Sharpen Or Replace provides additional guidance on deciding whether a cutting edge should be maintained or replaced.

Verify Repeat Work Before Starting the Batch

One inaccurate setting can carry through several cabinet or furniture components.

For repeated work, establish the setup, check the first suitable test or component & confirm the result before continuing through the batch.

That small verification stage can prevent one setup error becoming multiple incorrect parts.

Keep the SMT-1 Near the Saw Station

A multi-function accessory delivers the most value when it remains accessible.

A dedicated location near the saw keeps the SMT-1 identifiable rather than allowing it to disappear among blades, fasteners & general workshop tools.

Tool Storage can support a more organised cutting station where measuring aids, accessories & blades need separate storage.